2009/09/07

Cheapest & Latest ISO Standard (PDF) (6)

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm


17 Metrology and measurement. Physical phenomena
ICS Field
17.020 Metrology and measurement in general
Including measuring instruments in general, preferred numbers, standard measures, general aspects of reference materials, etc.
Chemical reference materials, see 71.040.30
Quantities and units, see 01.060
17.040 Linear and angular measurements
Including Geometrical Product Specification (GPS)
17.060 Measurement of volume, mass, density, viscosity
Including measuring instruments
Volumetric measurements of petroleum products and natural gas, see 75.180.30
17.080 Measurement of time, velocity, acceleration, angular velocity
Including measuring instruments
Time-measuring instruments, see 39.040
17.100 Measurement of force, weight and pressure
Including measuring and weighing instruments
17.120 Measurement of fluid flow
Including measuring instruments and installations
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 3:1973
Preferred numbers -- Series of preferred numbers 90.93 TC 19
ISO 17:1973
Guide to the use of preferred numbers and of series of preferred numbers 90.93 TC 19
ISO/IEC FDGuide 98-1
Uncertainty of measurement -- Part 1: Introduction to the expression of uncertainty in measurement 50.60 TMB
ISO/IEC NP Guide 98-2
Uncertainty of measurement -- Part 2: Concepts and basic principles 10.99 TMB
ISO/IEC Guide 98-3:2008
Uncertainty of measurement -- Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) 60.60 TMB
ISO/IEC Guide 98-3:2008/Suppl 1:2008
Propagation of distributions using a Monte Carlo method 60.60 TMB
ISO/IEC Guide 98-3:2008/Suppl 1:2008/Cor 1:2009
60.60 TMB
ISO/IEC Guide 98-3:2008/NP Suppl 2
Models with any number of output quantities 10.99 TMB
ISO/IEC Guide 98-3:2008/NP Suppl 3
Modelling 10.99 TMB
ISO/IEC NP Guide 98-4
Uncertainty of measurement -- Part 4: Role of measurement uncertainty in conformity assessment 10.99 TMB
ISO/IEC NP Guide 98-5
Uncertainty of measurement -- Part 5: Applications of the least-squares method 10.99 TMB
ISO/IEC Guide 99:2007
International vocabulary of metrology -- Basic and general concepts and associated terms (VIM) 60.60 TMB
ISO 497:1973
Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers 90.93 TC 19
ISO 2533:1975
Standard Atmosphere 90.60 TC 20/SC 6
ISO 2533:1975/Add 1:1985
Hypsometrical tables 60.60 TC 20/SC 6
ISO 2533:1975/Add 2:1997
Extension to - 5000 m and standard atmosphere as a function of altitude in feet 60.60 TC 20/SC 6
ISO 5479:1997
Statistical interpretation of data -- Tests for departure from the normal distribution 90.93 TC 69
ISO 5725-1:1994
Accuracy (trueness and precision) of measurement methods and results -- Part 1: General principles and definitions 90.93 TC 69/SC 6
ISO 5725-1:1994/Cor 1:1998
60.60 TC 69/SC 6
ISO 5725-2:1994
Accuracy (trueness and precision) of measurement methods and results -- Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method 90.92 TC 69/SC 6
ISO 5725-2:1994/Cor 1:2002
60.60 TC 69/SC 6
ISO 5725-3:1994
Accuracy (trueness and precision) of measurement methods and results -- Part 3: Intermediate measures of the precision of a standard measurement method 90.93 TC 69/SC 6
ISO 5725-3:1994/Cor 1:2001
60.60 TC 69/SC 6
ISO 5725-4:1994
Accuracy (trueness and precision) of measurement methods and results -- Part 4: Basic methods for the determination of the trueness of a standard measurement method 90.93 TC 69/SC 6
ISO 5725-5:1998
Accuracy (trueness and precision) of measurement methods and results -- Part 5: Alternative methods for the determination of the precision of a standard measurement method 90.20 TC 69/SC 6
ISO 5725-5:1998/Cor 1:2005
60.60 TC 69/SC 6
ISO 5725-6:1994
Accuracy (trueness and precision) of measurement methods and results -- Part 6: Use in practice of accuracy values 90.93 TC 69/SC 6
ISO 5725-6:1994/Cor 1:2001
60.60 TC 69/SC 6
ISO 10012:2003
Measurement management systems -- Requirements for measurement processes and measuring equipment 90.60 TC 176/SC 3
ISO 11095:1996
Linear calibration using reference materials 90.93 TC 69/SC 6
ISO 11843-1:1997
Capability of detection -- Part 1: Terms and definitions 90.93 TC 69/SC 6
ISO 11843-1:1997/Cor 1:2003
60.60 TC 69/SC 6
ISO 11843-2:2000
Capability of detection -- Part 2: Methodology in the linear calibration case 90.93 TC 69/SC 6
ISO 11843-2:2000/Cor 1:2007
60.60 TC 69/SC 6
ISO 11843-3:2003
Capability of detection -- Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used 90.93 TC 69/SC 6
ISO 11843-4:2003
Capability of detection -- Part 4: Methodology for comparing the minimum detectable value with a given value 90.93 TC 69/SC 6
ISO 11843-5:2008
Capability of detection -- Part 5: Methodology in the linear and non-linear calibration cases 60.60 TC 69/SC 6
ISO/WD 11843-6
Capability of detection -- Part 6: Determination of critical value and the minimum detectable value in Poisson distribution measurements 20.60 TC 69/SC 6
ISO/WD 11843-7
Capability of detection -- Part 7: Methodology based on stochastic properties of instrumental noise 20.60 TC 69/SC 6
ISO/DIS 21748
Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation 40.20 TC 69/SC 6
ISO/TS 21748:2004
Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation 90.92 TC 69/SC 6
ISO/TS 21749:2005
Measurement uncertainty for metrological applications -- Repeated measurements and nested experiments 90.20 TC 69/SC 6
ISO/TR 22971:2005
Accuracy (trueness and precision) of measurement methods and results -- Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results 60.60 TC 69/SC 6
ISO/TS 23165:2006
Geometrical product specifications (GPS) -- Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty 60.60 TC 213

17.140 Acoustics and acoustic measurements
Including measuring instruments and testing equipment
Acoustics in building, see 91.120.20
Noise with respect to human beings, see 13.140
ICS Field
17.040.01 Linear and angular measurements in general
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 1:2002
Geometrical Product Specifications (GPS) -- Standard reference temperature for geometrical product specification and verification 90.93 TC 213
ISO 1119:1998
Geometrical Product Specifications (GPS) -- Series of conical tapers and taper angles 90.20 TC 213
ISO 2538:1998
Geometrical Product Specifications (GPS) -- Series of angles and slopes on prisms 90.20 TC 213
ISO/TS 12780-1:2003
Geometrical Product Specifications (GPS) -- Straightness -- Part 1: Vocabulary and parameters of straightness 90.92 TC 213
ISO/TS 12780-2:2003
Geometrical Product Specifications (GPS) -- Straightness -- Part 2: Specification operators 90.92 TC 213
ISO/TS 12781-1:2003
Geometrical Product Specifications (GPS) -- Flatness -- Part 1: Vocabulary and parameters of flatness 90.92 TC 213
ISO/TS 12781-2:2003
Geometrical Product Specifications (GPS) -- Flatness -- Part 2: Specification operators 90.92 TC 213
ISO 14253-1:1998
Geometrical Product Specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 1: Decision rules for proving conformance or non-conformance with specifications 90.20 TC 213
ISO/DIS 14253-2
Geometrical product specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification 40.20 TC 213
ISO/TS 14253-2:1999
Geometrical Product Specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification 90.92 TC 213
ISO/TS 14253-2:1999/Cor 1:2007
60.60 TC 213
ISO/DIS 14253-3
Geometrical product specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 3: Guidelines for achieving agreements on measurement uncertainty statements 40.20 TC 213
ISO/TS 14253-3:2002
Geometrical Product Specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 3: Guidelines for achieving agreements on measurement uncertainty statements 90.92 TC 213
ISO/CD TS 14253-4
Geometrical product specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 4: Background on functional limits and specification limits in decision rules 30.99 TC 213
ISO/DIS 14406
Geometrical product specifications (GPS) -- Data extraction 40.60 TC 213
ISO/TR 14638:1995
Geometrical product specification (GPS) -- Masterplan 90.93 TC 213
ISO/DIS 14659
Geometrical product specifications (GPS) -- Fundamentals -- Concepts, principles and rules 40.00 TC 213
ISO 14660-1:1999
Geometrical Product Specifications (GPS) -- Geometrical features -- Part 1: General terms and definitions 90.93 TC 213
ISO 14660-2:1999
Geometrical Product Specifications (GPS) -- Geometrical features -- Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature 90.93 TC 213
ISO/CD 14660-3
Geometrical Product Specifications (GPS) -- Geometrical features -- Part 3: Extracted centre of a sphere 30.99 TC 213
ISO/TR 16015:2003
Geometrical product specifications (GPS) -- Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences 90.60 TC 213
ISO/TS 17450-1:2005
Geometrical product specifications (GPS) -- General concepts -- Part 1: Model for geometrical specification and verification 90.92 TC 213
ISO/DIS 17450-1
Geometrical product specifications (GPS) -- General concepts -- Part 1: Model for geometrical specification and verification 40.20 TC 213
ISO/TS 17450-1:2005/Cor 1:2007
60.60 TC 213
ISO/TS 17450-2:2002
Geometrical product specifications (GPS) -- General concepts -- Part 2: Basic tenets, specifications, operators and uncertainties 90.92 TC 213
ISO/DIS 17450-2
Geometrical product specifications (GPS) -- General concepts -- Part 2: Basic tenets, specifications, operators and uncertainties 40.20 TC 213
ISO/TS 17450-2:2002/Cor 1:2004
60.60 TC 213
ISO/DIS 22432
Geometrical product specifications (GPS) -- Features utilized in specification and verification 40.99 TC 213
ISO/DIS 25378.2
Geometrical product specifications (GPS) -- Characteristics and conditions -- Definitions 40.99 TC 213

17.040.10 Limits and fits
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO/FDIS 286-1
Geometrical product specifications (GPS) -- ISO code system for tolerances of linear sizes -- Part 1: Basis of tolerances, deviations and fits 50.00 TC 213
ISO 286-1:1988
ISO system of limits and fits -- Part 1: Bases of tolerances, deviations and fits 90.92 TC 213
ISO 286-2:1988
ISO system of limits and fits -- Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts 90.93 TC 213
ISO 286-2:1988/Cor 1:2006
60.60 TC 213
ISO 286-2:1988/DAmd 1
40.60 TC 213
ISO 1101:2004
Geometrical Product Specifications (GPS) -- Geometrical tolerancing -- Tolerances of form, orientation, location and run-out 90.60 TC 213
ISO 1101:2004/DAmd 1
Representation of specifications in the form of a 3D model 40.99 TC 213
ISO 1829:1975
Selection of tolerance zones for general purposes 90.92 TC 213
ISO/R 1938:1971
ISO system of limits and fits -- Part II : Inspection of plain workpieces 90.93 TC 213
ISO 2768-1:1989
General tolerances -- Part 1: Tolerances for linear and angular dimensions without individual tolerance indications 90.93 TC 213
ISO 2768-1:1989/WD Amd 1
20.20 TC 213
ISO 2768-2:1989
General tolerances -- Part 2: Geometrical tolerances for features without individual tolerance indications 90.93 TC 213
ISO 5458:1998
Geometrical Product Specifications (GPS) -- Geometrical tolerancing -- Positional tolerancing 90.20 TC 213
ISO/DIS 5459.3
Geometrical product specifications (GPS) -- Geometrical tolerancing -- Datums and datum-systems 40.93 TC 213
ISO 8062:1994
Castings -- System of dimensional tolerances and machining allowances 90.92 TC 213
ISO 8062-1:2007
Geometrical product specifications (GPS) -- Dimensional and geometrical tolerances for moulded parts -- Part 1: Vocabulary 60.60 TC 213
ISO/CD TS 8062-2
Geometrical Product Specifications (GPS) -- Dimensional and geometrical tolerances for moulded parts -- Part 2: Rules 30.99 TC 213
ISO 8062-3:2007
Geometrical product specifications (GPS) -- Dimensional and geometrical tolerances for moulded parts -- Part 3: General dimensional and geometrical tolerances and machining allowances for castings 60.60 TC 213
ISO 8062-3:2007/Cor 1:2009
60.60 TC 213
ISO 13920:1996
Welding -- General tolerances for welded constructions -- Dimensions for lengths and angles -- Shape and position 90.93 TC 44/SC 10
ISO/DIS 14405-1
Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 1: Linear sizes 40.93 TC 213
ISO/DIS 14405-2
Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 2: Dimensions other than linear sizes 40.99 TC 213

17.040.20 Properties of surfaces

Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 1302:2002
Geometrical Product Specifications (GPS) -- Indication of surface texture in technical product documentation 90.93 TC 213
ISO 1302:2002/CD Amd 2
Indication of bearing ration requirements 30.99 TC 213
ISO 4287:1997
Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Terms, definitions and surface texture parameters 90.93 TC 213
ISO 4287:1997/Cor 1:1998
60.60 TC 213
ISO 4287:1997/Amd 1
Peak count number 60.00 TC 213
ISO 4287:1997/Cor 2:2005
60.60 TC 213
ISO 4288:1996
Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Rules and procedures for the assessment of surface texture 90.93 TC 213
ISO 4288:1996/Cor 1:1998
60.60 TC 213
ISO 4291:1985
Methods for the assessement of departure from roundness -- Measurement of variations in radius 90.20 TC 213
ISO 4292:1985
Methods for the assessment of departure from roundness -- Measurement by two- and three-point methods 90.93 TC 213
ISO 8785:1998
Geometrical Product Specification (GPS) -- Surface imperfections -- Terms, definitions and parameters 90.20 TC 213
ISO 11562:1996
Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Metrological characteristics of phase correct filters 90.92 TC 213
ISO 11562:1996/Cor 1:1998
60.60 TC 213
ISO 12085:1996
Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Motif parameters 90.93 TC 213
ISO 12085:1996/Cor 1:1998
60.60 TC 213
ISO/TS 12180-1:2003
Geometrical Product Specifications (GPS) -- Cylindricity -- Part 1: Vocabulary and parameters of cylindrical form 90.92 TC 213
ISO/DIS 12180-1
Geometrical product specifications (GPS) -- Cylindricity -- Part 1: Vocabulary and parameters of cylindrical form 40.20 TC 213
ISO/TS 12180-2:2003
Geometrical Product Specifications (GPS) -- Cylindricity -- Part 2: Specification operators 90.92 TC 213
ISO/DIS 12180-2
Geometrical product specifications (GPS) -- Cylindricity -- Part 2: Specification operators 40.20 TC 213
ISO/TS 12181-1:2003
Geometrical Product Specifications (GPS) -- Roundness -- Part 1: Vocabulary and parameters of roundness 90.92 TC 213
ISO/DIS 12181-1
Geometrical product specifications (GPS) -- Roundness -- Part 1: Vocabulary and parameters of roundness 40.20 TC 213
ISO/DIS 12181-2
Geometrical product specifications (GPS) -- Roundness -- Part 2: Specification operators 40.20 TC 213
ISO/TS 12181-2:2003
Geometrical Product Specifications (GPS) -- Roundness -- Part 2: Specification operators 90.92 TC 213
ISO/DIS 12780-1
Geometrical product specifications (GPS) -- Straightness -- Part 1: Vocabulary and parameters of straightness 40.20 TC 213
ISO/DIS 12780-2
Geometrical product specifications (GPS) -- Straightness -- Part 2: Specification operators 40.20 TC 213
ISO/DIS 12781-1
Geometrical product specifications (GPS) -- Flatness -- Part 1: Vocabulary and parameters of flatness 40.20 TC 213
ISO/DIS 12781-2
Geometrical product specifications (GPS) -- Flatness -- Part 2: Specification operators 40.20 TC 213
ISO 13565-1:1996
Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 1: Filtering and general measurement conditions 90.93 TC 213
ISO 13565-1:1996/Cor 1:1998
60.60 TC 213
ISO 13565-2:1996
Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 2: Height characterization using the linear material ratio curve 90.93 TC 213
ISO 13565-2:1996/Cor 1:1998
60.60 TC 213
ISO 13565-3:1998
Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 3: Height characterization using the material probability curve 90.20 TC 213
ISO/TS 16610-1:2006
Geometrical product specifications (GPS) -- Filtration -- Part 1: Overview and basic concepts 60.60 TC 213
ISO/TS 16610-20:2006
Geometrical product specifications (GPS) -- Filtration -- Part 20: Linear profile filters: Basic concepts 60.60 TC 213
ISO/DIS 16610-21
Geometrical product specifications (GPS) -- Filtration -- Part 21: Linear profile filters: Gaussian filters 40.60 TC 213
ISO/TS 16610-22:2006
Geometrical product specifications (GPS) -- Filtration -- Part 22: Linear profile filters: Spline filters 60.60 TC 213
ISO/CD TS 16610-28
Geometrical product specifications (GPS) -- Filtration -- Part 28: Profile filters: End effects 30.00 TC 213
ISO/TS 16610-29:2006
Geometrical product specifications (GPS) -- Filtration -- Part 29: Linear profile filters: Spline wavelets 60.60 TC 213
ISO/TS 16610-30:2009
Geometrical product specifications (GPS) -- Filtration -- Part 30: Robust profile filters: Basic concepts 60.60 TC 213
ISO/CD TS 16610-31
Geometrical product specifications (GPS) -- Filtration -- Part 31: Robust profile filters: Gaussian regression filters 30.60 TC 213
ISO/TS 16610-32:2009
Geometrical product specifications (GPS) -- Filtration -- Part 32: Robust profile filters: Spline filters 60.60 TC 213
ISO/TS 16610-40:2006
Geometrical product specifications (GPS) -- Filtration -- Part 40: Morphological profile filters: Basic concepts 60.60 TC 213
ISO/TS 16610-41:2006
Geometrical product specifications (GPS) -- Filtration -- Part 41: Morphological profile filters: Disk and horizontal line-segment filters 60.60 TC 213
ISO/TS 16610-49:2006
Geometrical product specifications (GPS) -- Filtration -- Part 49: Morphological profile filters: Scale space techniques 60.60 TC 213
ISO/DIS 25178-2
Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 2: Terms, definitions and surface texture parameters 40.60 TC 213
ISO/DIS 25178-3
Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 3: Specification operators 40.60 TC 213
ISO/DIS 25178-6
Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 6: Classification of methods for measuring surface texture 40.99 TC 213
ISO/CD 25178-7
Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 7: Software measurement standards 30.00 TC 213
ISO/DIS 25178-601
Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 601: Nominal characteristics of contact (stylus) instruments 40.60 TC 213
ISO/DIS 25178-602
Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments 40.60 TC 213
ISO/CD 25178-603
Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 603: Nominal characteristics of non-contact (phase shifting interferometric microscopy) instruments 30.00 TC 213
ISO/CD 25178-604
Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments 30.00 TC 213
ISO/DIS 25178-701
Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 701: Calibration and measurement standards for contact (stylus) instruments 40.60 TC 213
17.040.30 Measuring instruments
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 1302:2002
Geometrical Product Specifications (GPS) -- Indication of surface texture in technical product documentation 90.93 TC 213
ISO 1302:2002/CD Amd 2
Indication of bearing ration requirements 30.99 TC 213
ISO 4287:1997
Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Terms, definitions and surface texture parameters 90.93 TC 213
ISO 4287:1997/Cor 1:1998
60.60 TC 213
ISO 4287:1997/Amd 1
Peak count number 60.00 TC 213
ISO 4287:1997/Cor 2:2005
60.60 TC 213
ISO 4288:1996
Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Rules and procedures for the assessment of surface texture 90.93 TC 213
ISO 4288:1996/Cor 1:1998
60.60 TC 213
ISO 4291:1985
Methods for the assessement of departure from roundness -- Measurement of variations in radius 90.20 TC 213
ISO 4292:1985
Methods for the assessment of departure from roundness -- Measurement by two- and three-point methods 90.93 TC 213
ISO 8785:1998
Geometrical Product Specification (GPS) -- Surface imperfections -- Terms, definitions and parameters 90.20 TC 213
ISO 11562:1996
Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Metrological characteristics of phase correct filters 90.92 TC 213
ISO 11562:1996/Cor 1:1998
60.60 TC 213
ISO 12085:1996
Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Motif parameters 90.93 TC 213
ISO 12085:1996/Cor 1:1998
60.60 TC 213
ISO/TS 12180-1:2003
Geometrical Product Specifications (GPS) -- Cylindricity -- Part 1: Vocabulary and parameters of cylindrical form 90.92 TC 213
ISO/DIS 12180-1
Geometrical product specifications (GPS) -- Cylindricity -- Part 1: Vocabulary and parameters of cylindrical form 40.20 TC 213
ISO/TS 12180-2:2003
Geometrical Product Specifications (GPS) -- Cylindricity -- Part 2: Specification operators 90.92 TC 213
ISO/DIS 12180-2
Geometrical product specifications (GPS) -- Cylindricity -- Part 2: Specification operators 40.20 TC 213
ISO/TS 12181-1:2003
Geometrical Product Specifications (GPS) -- Roundness -- Part 1: Vocabulary and parameters of roundness 90.92 TC 213
ISO/DIS 12181-1
Geometrical product specifications (GPS) -- Roundness -- Part 1: Vocabulary and parameters of roundness 40.20 TC 213
ISO/DIS 12181-2
Geometrical product specifications (GPS) -- Roundness -- Part 2: Specification operators 40.20 TC 213
ISO/TS 12181-2:2003
Geometrical Product Specifications (GPS) -- Roundness -- Part 2: Specification operators 90.92 TC 213
ISO/DIS 12780-1
Geometrical product specifications (GPS) -- Straightness -- Part 1: Vocabulary and parameters of straightness 40.20 TC 213
ISO/DIS 12780-2
Geometrical product specifications (GPS) -- Straightness -- Part 2: Specification operators 40.20 TC 213
ISO/DIS 12781-1
Geometrical product specifications (GPS) -- Flatness -- Part 1: Vocabulary and parameters of flatness 40.20 TC 213
ISO/DIS 12781-2
Geometrical product specifications (GPS) -- Flatness -- Part 2: Specification operators 40.20 TC 213
ISO 13565-1:1996
Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 1: Filtering and general measurement conditions 90.93 TC 213
ISO 13565-1:1996/Cor 1:1998
60.60 TC 213
ISO 13565-2:1996
Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 2: Height characterization using the linear material ratio curve 90.93 TC 213
ISO 13565-2:1996/Cor 1:1998
60.60 TC 213
ISO 13565-3:1998
Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 3: Height characterization using the material probability curve 90.20 TC 213
ISO/TS 16610-1:2006
Geometrical product specifications (GPS) -- Filtration -- Part 1: Overview and basic concepts 60.60 TC 213
ISO/TS 16610-20:2006
Geometrical product specifications (GPS) -- Filtration -- Part 20: Linear profile filters: Basic concepts 60.60 TC 213
ISO/DIS 16610-21
Geometrical product specifications (GPS) -- Filtration -- Part 21: Linear profile filters: Gaussian filters 40.60 TC 213
ISO/TS 16610-22:2006
Geometrical product specifications (GPS) -- Filtration -- Part 22: Linear profile filters: Spline filters 60.60 TC 213
ISO/CD TS 16610-28
Geometrical product specifications (GPS) -- Filtration -- Part 28: Profile filters: End effects 30.00 TC 213
ISO/TS 16610-29:2006
Geometrical product specifications (GPS) -- Filtration -- Part 29: Linear profile filters: Spline wavelets 60.60 TC 213
ISO/TS 16610-30:2009
Geometrical product specifications (GPS) -- Filtration -- Part 30: Robust profile filters: Basic concepts 60.60 TC 213
ISO/CD TS 16610-31
Geometrical product specifications (GPS) -- Filtration -- Part 31: Robust profile filters: Gaussian regression filters 30.60 TC 213
ISO/TS 16610-32:2009
Geometrical product specifications (GPS) -- Filtration -- Part 32: Robust profile filters: Spline filters 60.60 TC 213
ISO/TS 16610-40:2006
Geometrical product specifications (GPS) -- Filtration -- Part 40: Morphological profile filters: Basic concepts 60.60 TC 213
ISO/TS 16610-41:2006
Geometrical product specifications (GPS) -- Filtration -- Part 41: Morphological profile filters: Disk and horizontal line-segment filters 60.60 TC 213
ISO/TS 16610-49:2006
Geometrical product specifications (GPS) -- Filtration -- Part 49: Morphological profile filters: Scale space techniques 60.60 TC 213
ISO/DIS 25178-2
Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 2: Terms, definitions and surface texture parameters 40.60 TC 213
ISO/DIS 25178-3
Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 3: Specification operators 40.60 TC 213
ISO/DIS 25178-6
Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 6: Classification of methods for measuring surface texture 40.99 TC 213
ISO/CD 25178-7
Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 7: Software measurement standards 30.00 TC 213
ISO/DIS 25178-601
Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 601: Nominal characteristics of contact (stylus) instruments 40.60 TC 213
ISO/DIS 25178-602
Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments 40.60 TC 213
ISO/CD 25178-603
Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 603: Nominal characteristics of non-contact (phase shifting interferometric microscopy) instruments 30.00 TC 213
ISO/CD 25178-604
Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments 30.00 TC 213
ISO/DIS 25178-701
Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 701: Calibration and measurement standards for contact (stylus) instruments 40.60 TC 213

17.040.99 Other standards related to linear and angular measurements



17.160 Vibrations, shock and vibration measurements
Including measuring instruments and installations
Balancing and balancing machines, see 21.120.40
Vibration and shock with respect to human beings, see 13.160
Vibration protection of buildings, see 91.120.25
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 2017-1:2005
Mechanical vibration and shock -- Resilient mounting systems -- Part 1: Technical information to be exchanged for the application of isolation systems 90.93 TC 108
ISO 2017-2:2007
Mechanical vibration and shock -- Resilient mounting systems -- Part 2: Technical information to be exchanged for the application of vibration isolation associated with railway systems 60.60 TC 108
ISO/FDIS 2041
Mechanical vibration, shock and condition monitoring -- Vocabulary 50.20 TC 108
ISO 2041:1990
Vibration and shock -- Vocabulary 90.92 TC 108
ISO 2954:1975
Mechanical vibration of rotating and reciprocating machinery -- Requirements for instruments for measuring vibration severity 90.92 TC 108/SC 3
ISO 3046-5:2001
Reciprocating internal combustion engines -- Performance -- Part 5: Torsional vibrations 90.60 TC 70
ISO/NP 4548-7
Methods of test for full-flow lubricating oil filters for internal combustion engines -- Part 7: Vibration fatigue test 10.99 TC 70/SC 7
ISO 4548-7:1990
Methods of test for full-flow lubricating oil filters for internal combustion engines -- Part 7: Vibration fatigue test 90.92 TC 70/SC 7
ISO/DIS 4866
Mechanical vibration and shock -- Vibration of fixed structures -- Guidelines for the measurement of vibrations and evaluation of their effects on structures 40.99 TC 108/SC 2
ISO 4866:1990
Mechanical vibration and shock -- Vibration of buildings -- Guidelines for the measurement of vibrations and evaluation of their effects on buildings 90.92 TC 108/SC 2
ISO 4866:1990/Amd 1:1994
90.92 TC 108/SC 2
ISO 4866:1990/Amd 2:1996
90.92 TC 108/SC 2
ISO 5344:2004
Electrodynamic vibration generating systems -- Performance characteristics 90.60 TC 108/SC 6
ISO 5347-5:1993
Methods for the calibration of vibration and shock pick-ups -- Part 5: Calibration by Earth's gravitation 90.20 TC 108/SC 3
ISO 5347-7:1993
Methods for the calibration of vibration and shock pick-ups -- Part 7: Primary calibration by centrifuge 90.20 TC 108/SC 3
ISO 5347-8:1993
Methods for the calibration of vibration and shock pick-ups -- Part 8: Primary calibration by dual centrifuge 90.20 TC 108/SC 3
ISO 5347-10:1993
Methods for the calibration of vibration and shock pick-ups -- Part 10: Primary calibration by high impact shocks 90.20 TC 108/SC 3
ISO 5347-11:1993
Methods for the calibration of vibration and shock pick-ups -- Part 11: Testing of transverse vibration sensitivity 90.92 TC 108/SC 3
ISO 5347-12:1993
Methods for the calibration of vibration and shock pick-ups -- Part 12: Testing of transverse shock sensitivity 90.20 TC 108/SC 3
ISO 5347-13:1993
Methods for the calibration of vibration and shock pick-ups -- Part 13: Testing of base strain sensitivity 90.20 TC 108/SC 3
ISO 5347-14:1993
Methods for the calibration of vibration and shock pick-ups -- Part 14: Resonance frequency testing of undamped accelerometers on a steel block 90.92 TC 108/SC 3
ISO 5347-15:1993
Methods for the calibration of vibration and shock pick-ups -- Part 15: Testing of acoustic sensitivity 90.20 TC 108/SC 3
ISO 5347-16:1993
Methods for the calibration of vibration and shock pick-ups -- Part 16: Testing of mounting torque sensitivity 90.20 TC 108/SC 3
ISO 5347-17:1993
Methods for the calibration of vibration and shock pick-ups -- Part 17: Testing of fixed temperature sensitivity 90.20 TC 108/SC 3
ISO 5347-18:1993
Methods for the calibration of vibration and shock pick-ups -- Part 18: Testing of transient temperature sensitivity 90.20 TC 108/SC 3
ISO 5347-19:1993
Methods for the calibration of vibration and shock pick-ups -- Part 19: Testing of magnetic field sensitivity 90.20 TC 108/SC 3
ISO 5347-22:1997
Methods for the calibration of vibration and shock pick-ups -- Part 22: Accelerometer resonance testing -- General methods 90.93 TC 108/SC 3
ISO 5348:1998
Mechanical vibration and shock -- Mechanical mounting of accelerometers 90.20 TC 108/SC 3
ISO 6070:1981
Auxiliary tables for vibration generators -- Methods of describing equipment characteristics 90.93 TC 108/SC 6
ISO 6070:1981/Cor 1:2006
60.60 TC 108/SC 6
ISO 6954:2000
Mechanical vibration -- Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships 90.93 TC 108/SC 2
ISO/CD 7626-1
Vibration and shock -- Experimental determination of mechanical mobility -- Part 1: Basic definitions and transducers 30.99 TC 108
ISO 7626-1:1986
Vibration and shock -- Experimental determination of mechanical mobility -- Part 1: Basic definitions and transducers 90.92 TC 108
ISO 7626-2:1990
Vibration and shock -- Experimental determination of mechanical mobility -- Part 2: Measurements using single-point translation excitation with an attached vibration exciter 90.93 TC 108
ISO 7626-5:1994
Vibration and shock -- Experimental determination of mechanical mobility -- Part 5: Measurements using impact excitation with an exciter which is not attached to the structure 90.93 TC 108
ISO 7919-1:1996
Mechanical vibration of non-reciprocating machines -- Measurements on rotating shafts and evaluation criteria -- Part 1: General guidelines 90.93 TC 108/SC 2
ISO 7919-2:2001
Mechanical vibration -- Evaluation of machine vibration by measurements on rotating shafts -- Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min 90.92 TC 108/SC 2
ISO/DIS 7919-2
Mechanical vibration -- Evaluation of machine vibration by measurements on rotating shafts -- Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min 40.20 TC 108/SC 2
ISO 7919-3:2009
Mechanical vibration -- Evaluation of machine vibration by measurements on rotating shafts -- Part 3: Coupled industrial machines 60.60 TC 108/SC 2
ISO/DIS 7919-4
Mechanical vibration -- Evaluation of machine vibration by measurements on rotating shafts -- Part 4: Gas turbine sets with fluid-film bearings 40.20 TC 108/SC 2
ISO 7919-4:1996
Mechanical vibration of non-reciprocating machines -- Measurements on rotating shafts and evaluation criteria -- Part 4: Gas turbine sets 90.92 TC 108/SC 2
ISO 7919-5:2005
Mechanical vibration -- Evaluation of machine vibration by measurements on rotating shafts -- Part 5: Machine sets in hydraulic power generating and pumping plants 90.92 TC 108/SC 2
ISO 8002:1986
Mechanical vibrations -- Land vehicles -- Method for reporting measured data 90.93 TC 108/SC 2
ISO 8042:1988
Shock and vibration measurements -- Characteristics to be specified for seismic pick-ups 90.20 TC 108/SC 3
ISO 8528-9:1995
Reciprocating internal combustion engine driven alternating current generating sets -- Part 9: Measurement and evaluation of mechanical vibrations 90.93 TC 70
ISO 8568:2007
Mechanical shock -- Testing machines -- Characteristics and performance 60.60 TC 108/SC 6
ISO 8569:1996
Mechanical vibration and shock -- Measurement and evaluation of shock and vibration effects on sensitive equipment in buildings 90.93 TC 108/SC 2
ISO 8579-2:1993
Acceptance code for gears -- Part 2: Determination of mechanical vibrations of gear units during acceptance testing 90.20 TC 60
ISO 8608:1995
Mechanical vibration -- Road surface profiles -- Reporting of measured data 90.93 TC 108/SC 2
ISO 8626:1989
Servo-hydraulic test equipment for generating vibration -- Method of describing characteristics 90.93 TC 108/SC 6
ISO 9688:1990
Mechanical vibration and shock -- Analytical methods of assessing shock resistance of mechanical systems -- Information exchange between suppliers and users of analyses 90.93 TC 108
ISO 10055:1996
Mechanical vibration -- Vibration testing requirements for shipboard equipment and machinery components 90.93 TC 108/SC 2
ISO 10112:1991
Damping materials -- Graphical presentation of the complex modulus 90.93 TC 108
ISO/TS 10811-1:2000
Mechanical vibration and shock -- Vibration and shock in buildings with sensitive equipment -- Part 1: Measurement and evaluation 90.93 TC 108/SC 2
ISO/TS 10811-2:2000
Mechanical vibration and shock -- Vibration and shock in buildings with sensitive equipment -- Part 2: Classification 90.93 TC 108/SC 2
ISO 10813-1:2004
Vibration generating machines -- Guidance for selection -- Part 1: Equipment for environmental testing 90.60 TC 108/SC 6
ISO 10813-1:2004/Cor 1:2006
60.60 TC 108/SC 6
ISO 10815:1996
Mechanical vibration -- Measurement of vibration generated internally in railway tunnels by the passage of trains 90.93 TC 108/SC 2
ISO 10816-1:1995
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 1: General guidelines 90.93 TC 108/SC 2
ISO 10816-1:1995/DAmd 1
40.60 TC 108/SC 2
ISO 10816-2:2001
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min 90.92 TC 108/SC 2
ISO/DIS 10816-2
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min 40.20 TC 108/SC 2
ISO 10816-2:2001/Cor 1:2004
60.60 TC 108/SC 2
ISO 10816-3:2009
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ 60.60 TC 108/SC 2
ISO/DIS 10816-4
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 4: Gas turbine sets with fluid-film bearings 40.20 TC 108/SC 2
ISO 10816-4:1998
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 4: Gas turbine driven sets excluding aircraft derivatives 90.92 TC 108/SC 2
ISO 10816-5:2000
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 5: Machine sets in hydraulic power generating and pumping plants 90.92 TC 108/SC 2
ISO 10816-6:1995
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 6: Reciprocating machines with power ratings above 100 kW 90.93 TC 108/SC 2
ISO 10816-7:2009
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts 60.60 TC 108/SC 2
ISO 10817-1:1998
Rotating shaft vibration measuring systems -- Part 1: Relative and absolute sensing of radial vibration 90.20 TC 108/SC 3
ISO 13372:2004
Condition monitoring and diagnostics of machines -- Vocabulary 90.92 TC 108/SC 5
ISO/NP 13372
Condition monitoring and diagnostics of machines -- Vocabulary 10.99 TC 108/SC 5
ISO 13373-1:2002
Condition monitoring and diagnostics of machines -- Vibration condition monitoring -- Part 1: General procedures 90.93 TC 108/SC 2
ISO 13373-2:2005
Condition monitoring and diagnostics of machines -- Vibration condition monitoring -- Part 2: Processing, analysis and presentation of vibration data 90.93 TC 108/SC 2
ISO 13374-1:2003
Condition monitoring and diagnostics of machines -- Data processing, communication and presentation -- Part 1: General guidelines 90.93 TC 108/SC 5
ISO 13374-2:2007
Condition monitoring and diagnostics of machines -- Data processing, communication and presentation -- Part 2: Data processing 60.60 TC 108/SC 5
ISO/NP 13374-3
Condition monitoring and diagnostics of machines -- Data processing, communication and presentation -- Part 3: Communication 10.99 TC 108/SC 5
ISO/NP 13377
Transducers and instrumentation for vibration condition monitoring of machines -- Guidelines and requirements 10.99 TC 108/SC 3
ISO 13379:2003
Condition monitoring and diagnostics of machines -- General guidelines on data interpretation and diagnostics techniques 90.92 TC 108/SC 5
ISO/CD 13379-1
Condition monitoring and diagnostics of machines -- Data interpretation and diagnostics techniques which use information and data related to the condition of machines -- Part 1: General guidelines 30.60 TC 108/SC 5
ISO 13380:2002
Condition monitoring and diagnostics of machines -- General guidelines on using performance parameters 90.93 TC 108/SC 5
ISO 13381-1:2004
Condition monitoring and diagnostics of machines -- Prognostics -- Part 1: General guidelines 90.92 TC 108/SC 5
ISO 14695:2003
Industrial fans -- Method of measurement of fan vibration 90.93 TC 117
ISO 14695:2003/Cor 1:2009
60.60 TC 117
ISO 14837-1:2005
Mechanical vibration -- Ground-borne noise and vibration arising from rail systems -- Part 1: General guidance 90.93 TC 108/SC 2
ISO 14839-1:2002
Mechanical vibration -- Vibration of rotating machinery equipped with active magnetic bearings -- Part 1: Vocabulary 90.93 TC 108/SC 2
ISO 14839-2:2004
Mechanical vibration -- Vibration of rotating machinery equipped with active magnetic bearings -- Part 2: Evaluation of vibration 90.93 TC 108/SC 2
ISO 14839-3:2006
Mechanical vibration -- Vibration of rotating machinery equipped with active magnetic bearings -- Part 3: Evaluation of stability margin 60.60 TC 108/SC 2
ISO/NP 14839-4
Mechanical vibration -- Vibration of rotating machinery equipped with active magnetic bearings -- Part 4: Technical guidelines 10.99 TC 108/SC 2
ISO 14963:2003
Mechanical vibration and shock -- Guidelines for dynamic tests and investigations on bridges and viaducts 90.93 TC 108/SC 2
ISO 14964:2000
Mechanical vibration and shock -- Vibration of stationary structures -- Specific requirements for quality management in measurement and evaluation of vibration 90.93 TC 108/SC 2
ISO 15230:2007
Mechanical vibration and shock -- Coupling forces at the man--machine interface for hand-transmitted vibration 60.60 TC 108/SC 4
ISO 15261:2004
Vibration and shock generating systems -- Vocabulary 90.60 TC 108/SC 6
ISO 16063-1:1998
Methods for the calibration of vibration and shock transducers -- Part 1: Basic concepts 90.20 TC 108/SC 3
ISO 16063-11:1999
Methods for the calibration of vibration and shock transducers -- Part 11: Primary vibration calibration by laser interferometry 90.20 TC 108/SC 3
ISO 16063-12:2002
Methods for the calibration of vibration and shock transducers -- Part 12: Primary vibration calibration by the reciprocity method 90.93 TC 108/SC 3
ISO 16063-12:2002/Cor 1:2008
60.60 TC 108/SC 3
ISO 16063-13:2001
Methods for the calibration of vibration and shock transducers -- Part 13: Primary shock calibration using laser interferometry 90.93 TC 108/SC 3
ISO 16063-15:2006
Methods for the calibration of vibration and shock transducers -- Part 15: Primary angular vibration calibration by laser interferometry 90.20 TC 108/SC 3
ISO 16063-21:2003
Methods for the calibration of vibration and shock transducers -- Part 21: Vibration calibration by comparison to a reference transducer 90.93 TC 108/SC 3
ISO 16063-21:2003/Cor 1:2009
60.60 TC 108/SC 3
ISO 16063-22:2005
Methods for the calibration of vibration and shock transducers -- Part 22: Shock calibration by comparison to a reference transducer 90.93 TC 108/SC 3
ISO/FDIS 16063-31
Methods for the calibration of vibration and shock transducers -- Part 31: Testing of transverse vibration sensitivity 50.20 TC 108/SC 3
ISO/DIS 16063-41
Methods for the calibration of vibration and shock transducers -- Part 41: Calibration of laser vibrometers 40.20 TC 108/SC 3
ISO 16587:2004
Mechanical vibration and shock -- Performance parameters for condition monitoring of structures 90.93 TC 108
ISO/CD 17359
Condition monitoring and diagnostics of machines -- General guidelines 30.60 TC 108/SC 5
ISO 17359:2003
Condition monitoring and diagnostics of machines -- General guidelines 90.92 TC 108/SC 5
ISO/NP 18312-1
Mechanical vibration and shock -- Measurement of vibration power flow from machines into connected support structures -- Part 1: Direct method 10.99 TC 108
ISO/NP 18312-2
Mechanical vibration and shock -- Measurement of vibration power flow from machines into connected support structures -- Part 2: Indirect method 10.99 TC 108
ISO 18431-1:2005
Mechanical vibration and shock -- Signal processing -- Part 1: General introduction 90.92 TC 108
ISO 18431-1:2005/Cor 1:2009
60.60 TC 108
ISO 18431-2:2004
Mechanical vibration and shock -- Signal processing -- Part 2: Time domain windows for Fourier Transform analysis 90.93 TC 108
ISO 18431-2:2004/Cor 1:2008
60.60 TC 108
ISO 18431-4:2007
Mechanical vibration and shock -- Signal processing -- Part 4: Shock-response spectrum analysis 60.60 TC 108
ISO 18434-1:2008
Condition monitoring and diagnostics of machines -- Thermography -- Part 1: General procedures 60.60 TC 108/SC 5
ISO/NP 18436-1
Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 1: Requirements for certification bodies and the certification process 10.99 TC 108/SC 5
ISO 18436-1:2004
Condition monitoring and diagnostics of machines -- Requirements for training and certification of personnel -- Part 1: Requirements for certifying bodies and the certification process 90.92 TC 108/SC 5
ISO 18436-1:2004/Cor 1:2006
90.92 TC 108/SC 5
ISO/CD 18436-2
Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 2: Vibration condition monitoring 30.60 TC 108/SC 5
ISO 18436-2:2003
Condition monitoring and diagnostics of machines -- Requirements for training and certification of personnel -- Part 2: Vibration condition monitoring and diagnostics 90.92 TC 108/SC 5
ISO 18436-3:2008
Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 3: Requirements for training bodies and the training process 60.60 TC 108/SC 5
ISO 18436-3:2008/Amd 1:2009
60.60 TC 108/SC 5
ISO 18436-4:2008
Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 4: Field lubricant analysis 60.60 TC 108/SC 5
ISO/DIS 18436-5
Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 5: Lubricant laboratory technician/analyst 40.60 TC 108/SC 5
ISO 18436-6:2008
Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 6: Acoustic emission 60.60 TC 108/SC 5
ISO 18436-7:2008
Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 7: Thermography 60.60 TC 108/SC 5
ISO 18437-2:2005
Mechanical vibration and shock -- Characterization of the dynamic mechanical properties of visco-elastic materials -- Part 2: Resonance method 90.93 TC 108
ISO 18437-3:2005
Mechanical vibration and shock -- Characterization of the dynamic mechanical properties of visco-elastic materials -- Part 3: Cantilever shear beam method 90.93 TC 108
ISO 18437-4:2008
Mechanical vibration and shock -- Characterization of the dynamic mechanical properties of visco-elastic materials -- Part 4: Dynamic stiffness method 60.60 TC 108
ISO 18649:2004
Mechanical vibration -- Evaluation of measurement results from dynamic tests and investigations on bridges 90.93 TC 108/SC 2
ISO 21289:2008
Mechanical vibration and shock -- Parameters to be specified for the acquisition of vibration data 60.60 TC 108
ISO 22096:2007
Condition monitoring and diagnostics of machines -- Acoustic emission 60.60 TC 108/SC 5
ISO 22266-1:2009
Mechanical vibration -- Torsional vibration of rotating machinery -- Part 1: Land-based steam and gas turbine generator sets in excess of 50 MW 60.60 TC 108/SC 2
ISO/CD 29821-1
Condition monitoring and diagnostics of machines -- Ultrasound -- Part 1: General guidelines 30.60 TC 108/SC 5


17.180 Optics and optical measurements
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 17713-1:2007
Meteorology -- Wind measurements -- Part 1: Wind tunnel test methods for rotating anemometer performance 60.60 TC 146/SC 5
ICS Field
17.180.01 Optics and optical measurements in general
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 7944:1998
Optics and optical instruments -- Reference wavelengths 90.60 TC 172
ISO 9334:2007
Optics and photonics -- Optical transfer function -- Definitions and mathematical relationships 60.60 TC 172/SC 1
ISO 9335:1995
Optics and photonics -- Optical transfer function -- Principles and procedures of measurement 90.93 TC 172/SC 1
ISO 9335:1995/Cor 1:2005
60.60 TC 172/SC 1
ISO 11421:1997
Optics and optical instruments -- Accuracy of optical transfer function (OTF) measurement 90.93 TC 172/SC 1
ISO 13653:1996
Optics and optical instruments -- General optical test methods -- Measurement of relative irradiance in the image field 90.93 TC 172/SC 1
ISO 15368:2001
Optics and optical instruments -- Measurement of reflectance of plane surfaces and transmittance of plane parallel elements 90.93 TC 172/SC 1
ISO 15529:2007
Optics and photonics -- Optical transfer function -- Principles of measurement of modulation transfer function (MTF) of sampled imaging systems 60.60 TC 172/SC 1
ISO/CIE 23539:2005
Photometry -- The CIE system of physical photometry 90.60 CIE

17.180.20 Colours and measurement of light
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 11664-1:2007
Colorimetry -- Part 1: CIE standard colorimetric observers 60.60 CIE
ISO 11664-2:2007
Colorimetry -- Part 2: CIE standard illuminants 60.60 CIE
ISO 11664-4:2008
Colorimetry -- Part 4: CIE 1976 L*a*b* Colour space 60.60 CIE
ISO/FDIS 11664-5
Colorimetry -- Part 5: CIE 1976 L*u*v* Colour space and u',v' uniform chromaticity scale diagram 50.20 CIE
ISO 15469:2004
Spatial distribution of daylight -- CIE standard general sky 90.93 CIE
ISO/CIE 17166:1999
Erythema reference action spectrum and standard erythema dose 90.93 CIE
ISO/CIE 23603:2005
Standard method of assessing the spectral quality of daylight simulators for visual appraisal and measurement of colour 90.60 CIE
ISO/CIE 28077:2006
Photocarcinogenesis action spectrum (non-melanoma skin cancers) 60.60 CIE
17IEC 61966-2-1/Amd 1:2003
60.60 TC 42
18IEC 61966-2-2:2003
Multimedia systems and equipment -- Colour measurement and management -- Part 2-2: Colour management -- Extended RGB colour space -- scRGB 60.60 TC 42

17.180.30 Optical measuring instruments
Including spectroscopes, geodetic instruments, etc.
Fibre optics, see 33.180
Laser equipment, see 31.260
Ophthalmic optics and instruments, see 11.040.70
Optical equipment, materials and components, see 37.020
Photographic equipment lenses, see 37.040.10
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 9849:2000
Optics and optical instruments -- Geodetic and surveying instruments -- Vocabulary 90.60 TC 172/SC 6
ISO 12858-1:1999
Optics and optical instruments -- Ancillary devices for geodetic instruments -- Part 1: Invar levelling staffs 90.60 TC 172/SC 6
ISO 12858-2:1999
Optics and optical instruments -- Ancillary devices for geodetic instruments -- Part 2: Tripods 90.60 TC 172/SC 6
ISO 12858-3:2005
Optics and optical instruments -- Ancillary devices for geodetic instruments -- Part 3: Tribrachs 90.60 TC 172/SC 6
ISO 17123-1:2002
Optics and optical instruments -- Field procedures for testing geodetic and surveying instruments -- Part 1: Theory 90.92 TC 172/SC 6
ISO/DIS 17123-1
Optics and optical instruments -- Field procedures for testing geodetic and surveying instruments -- Part 1: Theory 40.60 TC 172/SC 6
ISO 17123-2:2001
Optics and optical instruments -- Field procedures for testing geodetic and surveying instruments -- Part 2: Levels 90.93 TC 172/SC 6
ISO 17123-3:2001
Optics and optical instruments -- Field procedures for testing geodetic and surveying instruments -- Part 3: Theodolites 90.93 TC 172/SC 6
ISO 17123-4:2001
Optics and optical instruments -- Field procedures for testing geodetic and surveying instruments -- Part 4: Electro-optical distance meters (EDM instruments) 90.60 TC 172/SC 6
ISO 17123-5:2005
Optics and optical instruments -- Field procedures for testing geodetic and surveying instruments -- Part 5: Electronic tacheometers 90.60 TC 172/SC 6
ISO 17123-6:2003
Optics and optical instruments -- Field procedures for testing geodetic and surveying instruments -- Part 6: Rotating lasers 90.60 TC 172/SC 6
ISO 17123-7:2005
Optics and optical instruments -- Field procedures for testing geodetic and surveying instruments -- Part 7: Optical plumbing instruments 90.60 TC 172/SC 6
ISO 17123-8:2007
Optics and optical instruments -- Field procedures for testing geodetic and surveying instruments -- Part 8: GNSS field measurement systems in real-time kinematic (RTK) 60.60 TC 172/SC 6

17.180.99 Other standards related to optics and optical measurements


17.200 Thermodynamics and temperature measurements
ICS Field
17.200.01 Thermodynamics in general
17.200.10 Heat. Calorimetry
17.200.20 Temperature-measuring instruments
Including thermostats
Medical thermometers, see 11.040.55
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 386:1977
Liquid-in-glass laboratory thermometers -- Principles of design, construction and use 90.93 TC 48
ISO 651:1975
Solid-stem calorimeter thermometers 90.93 TC 48
ISO 652:1975
Enclosed-scale calorimeter thermometers 90.93 TC 48
ISO 653:1980
Long solid-stem thermometers for precision use 90.93 TC 48
ISO 654:1980
Short solid-stem thermometers for precision use 90.93 TC 48
ISO 655:1980
Long enclosed-scale thermometers for precision use 90.93 TC 48
ISO 656:1980
Short enclosed-scale thermometers for precision use 90.93 TC 48
ISO 1146:1988
Pyrometric reference cones for laboratory use -- Specification 90.93 TC 33
ISO 1770:1981
Solid-stem general purpose thermometers 90.93 TC 48
ISO 1770:1981/Amd 1:1983
60.60 TC 48
ISO 1771:1981
Enclosed-scale general purpose thermometers 90.93 TC 48
ISO 1771:1981/Amd 1:1983
60.60 TC 48
ISO 4786:1977
Enclosed-scale adjustable-range thermometers 90.93 TC 48
ISO 4795:1996
Glass for thermometer bulbs 90.93 TC 48/SC 3
ISO 6152:1982
Thermometers for use with alcoholometers and alcohol hydrometers 90.93 TC 48/SC 3
ISO 17714:2007
Meteorology -- Air temperature measurements -- Test methods for comparing the performance of thermometer shields/screens and defining important characteristics 60.60 TC 146/SC 5

17.200.99 Other standards related to thermodynamics

17.220 Electricity. Magnetism. Electrical and magnetic measurements
17.240 Radiation measurements
Including dosimetry
Radiation protection, see 13.280
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 4037-1:1996
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy -- Part 1: Radiation characteristics and production methods 90.93 TC 85/SC 2
ISO 4037-2:1997
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy -- Part 2: Dosimetry for radiation protection over the energy ranges from 8 keV to 1,3 MeV and 4 MeV to 9 MeV 90.93 TC 85/SC 2
ISO 4037-3:1999
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy -- Part 3: Calibration of area and personal dosemeters and the measurement of their response as a function of energy and angle of incidence 90.93 TC 85/SC 2
ISO 4037-4:2004
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy -- Part 4: Calibration of area and personal dosemeters in low energy X reference radiation fields 90.93 TC 85/SC 2
ISO 6980-1:2006
Nuclear energy -- Reference beta-particle radiation -- Part 1: Methods of production 60.60 TC 85/SC 2
ISO 6980-2:2004
Nuclear energy -- Reference beta-particle radiation -- Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field 90.93 TC 85/SC 2
ISO 6980-3:2006
Nuclear energy -- Reference beta-particle radiation -- Part 3: Calibration of area and personal dosemeters and the determination of their response as a function of beta radiation energy and angle of incidence 60.60 TC 85/SC 2
ISO 8529-1:2001
Reference neutron radiations -- Part 1: Characteristics and methods of production 90.93 TC 85/SC 2
ISO 8529-1:2001/Cor 1:2008
60.60 TC 85/SC 2
ISO 8529-2:2000
Reference neutron radiations -- Part 2: Calibration fundamentals of radiation protection devices related to the basic quantities characterizing the radiation field 90.93 TC 85/SC 2
ISO 8529-3:1998
Reference neutron radiations -- Part 3: Calibration of area and personal dosimeters and determination of response as a function of energy and angle of incidence 90.93 TC 85/SC 2
ISO/DIS 8769
Reference sources -- Calibration of surface contamination monitors -- Alpha-, beta- and photon emitters 40.20 TC 85/SC 2
ISO 8769:1988
Reference sources for the calibration of surface contamination monitors -- Beta-emitters (maximum beta energy greater than 0,15 MeV) and alpha-emitters 90.92 TC 85/SC 2
ISO 8769-2:1996
Reference sources for the calibration of surface contamination monitors -- Part 2: Electrons of energy less than 0,15 MeV and photons of energy less than 1,5 MeV 90.92 TC 85/SC 2
ISO 9696:2007
Water quality -- Measurement of gross alpha activity in non-saline water -- Thick source method 60.60 TC 147
ISO 10703:2007
Water quality -- Determination of the activity concentration of radionuclides -- Method by high resolution gamma-ray spectrometry 60.60 TC 147
ISO/CD 11665-1
Measurement of radioactivity in the environment -- Air -- Part 1: Radon-222 and its short-lived decay products in the atmospheric environment: their origins and measurement methods 30.60 TC 85/SC 2
ISO/CD 11665-2
Measurement of radioactivity in the environment -- Air -- Part 2: Radon-222: Integrated measurement methods for the determination of the average potential alpha energy concentration of short-lived radon decay products in the atmospheric environment. 30.60 TC 85/SC 2
ISO/CD 11665-3
Measurement of radioactivity in the environment -- Air -- Part 3: Radon-222: Spot measurement methods of the potential alpha energy concentration of short-lived radon decay products in the atmospheric environment 30.60 TC 85/SC 2
ISO/CD 11665-4
Measurement of radioactivity in the environment -- Air -- Part 4: Radon-222: Integrated measurement methods for the determination of the average radon activity concentration in the atmospheric environment using passive sampling and delayed analysis 30.60 TC 85/SC 2
ISO/CD 11665-5
Measurement of radioactivity in the environment -- Air -- Part 5: Radon-222: Continuous measurement methods of radon activity concentration in the atmospheric environment 30.60 TC 85/SC 2
ISO/CD 11665-6
Measurement of radioactivity in the environment -- Air -- Part 6: Radon-222: Methods for estimation of surface exhalation rate by accumulation method in the environment 30.60 TC 85/SC 2
ISO/CD 11665-7
Measurement of radioactivity in the environment -- Air -- Part 7: Radon-222: Spot measurement methods of radon activity concentration in the atmospheric environment 30.60 TC 85/SC 2
ISO/CD 11665-8
Measurement of radioactivity in the environment -- Air -- Part 8: Radon-222 in buildings: Methodologies for screening and additional investigations 30.60 TC 85/SC 2
ISO/DIS 11704
Water quality -- Measurement of gross alpha and beta activity concentration in non-saline water -- Liquid scintillation counting method 40.20 TC 147
ISO/DIS 11929
Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation -- Fundamentals and application 40.99 TC 85/SC 2
ISO 11929-1:2000
Determination of the detection limit and decision threshold for ionizing radiation measurements -- Part 1: Fundamentals and application to counting measurements without the influence of sample treatment 90.92 TC 85/SC 2
ISO 11929-2:2000
Determination of the detection limit and decision threshold for ionizing radiation measurements -- Part 2: Fundamentals and application to counting measurements with the influence of sample treatment 90.92 TC 85/SC 2
ISO 11929-3:2000
Determination of the detection limit and decision threshold for ionizing radiation measurements -- Part 3: Fundamentals and application to counting measurements by high resolution gamma spectrometry, without the influence of sample treatment 90.92 TC 85/SC 2
ISO 11929-4:2001
Determination of the detection limit and decision threshold for ionizing radiation measurements -- Part 4: Fundamentals and application to measurements by use of linear-scale analogue ratemeters, without the influence of sample treatment 90.92 TC 85/SC 2
ISO 11929-5:2005
Determination of the detection limit and decision threshold for ionizing radiation measurements -- Part 5: Fundamentals and applications to counting measurements on filters during accumulation of radioactive material 90.92 TC 85/SC 2
ISO 11929-6:2005
Determination of the detection limit and decision threshold for ionizing radiation measurements -- Part 6: Fundamentals and applications to measurements by use of transient mode 90.92 TC 85/SC 2
ISO 11929-7:2005
Determination of the detection limit and decision threshold for ionizing radiation measurements -- Part 7: Fundamentals and general applications 90.92 TC 85/SC 2
ISO 11929-8:2005
Determination of the detection limit and decision threshold for ionizing radiation measurements -- Part 8: Fundamentals and application to unfolding of spectrometric measurements without the influence of sample treatment 90.92 TC 85/SC 2
ISO 12789-1:2008
Reference radiation fields -- Simulated workplace neutron fields -- Part 1: Characteristics and methods of production 60.60 TC 85/SC 2
ISO 12789-2:2008
Reference radiation fields - Simulated workplace neutron fields -- Part 2: Calibration fundamentals related to the basic quantities 60.60 TC 85/SC 2
ISO/CD 13160
Water quality -- Measurement of strontium 90 and strontium 89 30.20 TC 147
ISO/CD 13161
Water quality -- Measurement of polonium 210 concentration activity in water by alpha spectrometry 30.20 TC 147
ISO/CD 13162
Water quality -- Determination of carbon 14 activity -- Liquid scintillation counting method 30.20 TC 147
ISO 14850-1:2004
Nuclear energy -- Waste-packages activity measurement -- Part 1: High-resolution gamma spectrometry in integral mode with open geometry 90.60 TC 85/SC 5
ISO 18589-1:2005
Measurement of radioactivity in the environment -- Soil -- Part 1: General guidelines and definitions 90.60 TC 85/SC 2
ISO 18589-2:2007
Measurement of radioactivity in the environment -- Soil -- Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples 60.60 TC 85/SC 2
ISO 18589-3:2007
Measurement of radioactivity in the environment -- Soil -- Part 3: Measurement of gamma-emitting radionuclides 60.60 TC 85/SC 2
ISO 18589-4:2009
Measurement of radioactivity in the environment -- Soil -- Part 4: Measurement of plutonium isotopes (plutonium 238 and plutonium 239 + 240) by alpha spectrometry 60.60 TC 85/SC 2
ISO 18589-5:2009
Measurement of radioactivity in the environment -- Soil -- Part 5: Measurement of strontium 90 60.60 TC 85/SC 2
ISO 18589-6:2009
Measurement of radioactivity in the environment -- Soil -- Part 6: Measurement of gross alpha and gross beta activities 60.60 TC 85/SC 2
ISO 19238:2004
Radiation protection -- Performance criteria for service laboratories performing biological dosimetry by cytogenetics 90.92 TC 85/SC 2
ISO 21439:2009
Clinical dosimetry -- Beta radiation sources for brachytherapy 60.60 TC 85/SC 2
ISO 21484:2008
Nuclear fuel technology -- Determination of the O/M ratio in MOX pellets -- Gravimetric method 60.60 TC 85/SC 5
ISO/ASTM 51204:2004
Practice for dosimetry in gamma irradiation facilities for food processing 90.60 TC 85
ISO/ASTM DIS 51205
Practice for use of a ceric-cerous sulfate dosimetry system 40.99 TC 85
ISO/ASTM 51205:2002
Practice for use of a ceric-cerous sulfate dosimetry system 90.92 TC 85
ISO/ASTM 51261:2002
Guide for selection and calibration of dosimetry systems for radiation processing 90.93 TC 85
ISO/ASTM 51275:2004
Practice for use of a radiochromic film dosimetry system 90.60 TC 85
ISO/ASTM 51276:2002
Practice for use of a polymethylmethacrylate dosimetry system 90.60 TC 85
ISO/ASTM 51310:2004
Practice for use of a radiochromic optical waveguide dosimetry system 90.60 TC 85
ISO/ASTM 51400:2003
Practice for characterization and performance of a high-dose radiation dosimetry calibration laboratory 90.60 TC 85
ISO/ASTM 51401:2003
Practice for use of a dichromate dosimetry system 90.60 TC 85
ISO/ASTM 51431:2005
Practice for dosimetry in electron beam and X-ray (bremsstrahlung) irradiation facilities for food processing 90.60 TC 85
ISO/ASTM DIS 51538
Practice for use of the ethanol-chlorobenzene dosimetry system 40.99 TC 85
ISO/ASTM 51538:2002
Practice for use of the ethanol-chlorobenzene dosimetry system 90.92 TC 85
ISO/ASTM 51539:2005
Guide for use of radiation-sensitive indicators 90.60 TC 85
ISO/ASTM 51540:2004
Practice for use of a radiochromic liquid dosimetry system 90.60 TC 85
ISO/ASTM 51607:2004
Practice for use of the alanine-EPR dosimetry system 90.60 TC 85
ISO/ASTM 51608:2005
Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing 90.60 TC 85
ISO/ASTM 51631:2003
Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations 90.60 TC 85
ISO/ASTM 51649:2005
Practice for dosimetry in an electron beam facility for radiation processing at energies between 300 keV and 25 MeV 90.60 TC 85
ISO/ASTM 51650:2005
Practice for use of a cellulose triacetate dosimetry system 90.60 TC 85
ISO/ASTM 51702:2004
Practice for dosimetry in a gamma irradiation facility for radiation processing 90.60 TC 85
ISO/ASTM 51707:2005
Guide for estimating uncertainties in dosimetry for radiation processing 90.60 TC 85
ISO/ASTM 51818:2002
Practice for dosimetry in an electron-beam facility for radiation processing at energies between 80 keV and 300 keV 90.92 TC 85
ISO/ASTM DIS 51818.2
Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 keV 40.99 TC 85
ISO/ASTM 51900:2002
Guide for dosimetry in radiation research on food and agricultural products 90.92 TC 85
ISO/ASTM DIS 51900
Guide for dosimetry in radiation research on food and agricultural products 40.99 TC 85
ISO/ASTM 51939:2005
Practice for blood irradiation dosimetry 90.60 TC 85
ISO/ASTM 51940:2004
Guide for dosimetry for sterile insects release programs 90.60 TC 85
ISO/ASTM 51956:2005
Practice for use of thermoluminescence dosimetry (TLD) systems for radiation processing 90.60 TC 85
ISO/ASTM 52116:2002
Practice for dosimetry for a self-contained dry-storage gamma-ray irradiator 90.60 TC 85


Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm

No comments:

Post a Comment