Any question, send the mail to findstandards@tom.com directly
http://www.findstandards.info
http://www.findstandards.info/Standards/DIN%20Standards.htm
http://www.findstandards.info/Standards/BSI%20Standards.htm
http://www.findstandards.info/Standards/ASTM%20Standards.htm
http://www.findstandards.info/Standards/ISO%20Standards.htm
http://www.findstandards.info/Standards/SAE%20Standards.htm
http://www.findstandards.info/Standards/JIS%20Standards.htm
http://www.findstandards.info/Standards/NFPA%20Standards.htm
http://www.findstandards.info/Standards/IEEE%20Standards.htm
http://www.findstandards.info/Standards/API%20Standards.htm
Equipment Engineering (EE) - Acoustic noise emitted by telecommunications equipment; English version ETS 300753:1997 (FOREIGN STANDARD)
DIN ETS 300753:1998
Pressure gauges - Part 3: Diaphragm and capsule pressure gauges; dimensions, metrology, requirements and testing (FOREIGN STANDARD)
DIN EN 837-3:1997
Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges (FOREIGN STANDARD)
DIN EN 837-2:1997
Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing (FOREIGN STANDARD)
DIN EN 837-1:1997
Multimedia systems and equipment - Colour measurement and management - Part 5: Equipment using plasma display panels (IEC 100/1295/CDV:2007); German version prEN 61966-5:2007 (FOREIGN STANDARD)
DIN EN 61966-5:2008
Transmitters for use in industrial-process control systems - Part 2: Methods for inspection and routine testing (IEC 65B/657/CDV:2008); German version FprEN 60770-2:2008 (FOREIGN STANDARD)
DIN EN 60770-2:2008
Laboratory method for evaluating vehicle seat vibration - Basic requirements (ISO 10326-1:1992) (FOREIGN STANDARD)
DIN EN 30326-1:1994
Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements; Amendment 1 (ISO 10326-1:1992/Amd. 1:2007); German version EN 30326-1:1994/A1:2007, Corrigendum to DIN EN 30326-1/A1:2008-01 (Foreign Standard)
DIN EN 30326-1/A1 Berichtigung 1:2009
Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements - Amendment 1 (ISO 10326-1:1992/Amd 1:2007); German version EN 30326-1:1994/A1:2007 (FOREIGN STANDARD)
DIN EN 30326-1/A1:2008
DIN EN 29295:1991
Acoustics; measurement of high-frequency noise emitted by computer and business equipment (ISO 9295:1989) (FOREIGN STANDARD)
Measurement of fluid flow in closed conduits; methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991) (FOREIGN STANDARD)
DIN EN 29104:1993
DIN EN 29053:1993
Acoustics; materials for acoustical applications; determination of airflow resistance (ISO 9053:1991) (FOREIGN STANDARD)
Refrigerators, frozen food storage cabinets and food freezers for household and similar use; measurement of emission of airborne acoustical noise (ISO 8960:1991) (FOREIGN STANDARD)
DIN EN 28960:1993
DIN EN 27574-4:1989
Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment; part 4: methods for stated values for batches of machines; (identical with ISO 7574-4:1985) (FOREIGN STANDARD)
DIN EN 27574-3:1989
Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment; part 3: simple (transition) method for stated values for batches of machines; (identical with ISO 7574-3:1985) (FOREIGN STANDARD)
DIN EN 27574-2:1989
Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment; part 2: methods for stated values for individual machines; (identical with ISO 7574-2:1985) (FOREIGN STANDARD)
DIN EN 27574-1:1989
Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment; part 1: general considerations and definitions; (identical with ISO 7574-1:1985) (FOREIGN STANDARD)
Measurement of liqid flow in closed conduits; weighing method (ISO 4185:1980) (FOREIGN STANDARD)
DIN EN 24185:1993
DIN EN 1915-4:2005
Aircraft ground support equipment - General requirements - Part 4: Noise measurement methods and reduction (FOREIGN STANDARD)
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 3: Normalized traffic noise spectrum (FOREIGN STANDARD)
DIN EN 1793-3:1997
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation (FOREIGN STANDARD)
DIN EN 1793-2:1997
Road traffic noise devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption (FOREIGN STANDARD)
DIN EN 1793-1:1997
Surface active agents - Colorimetric characterization of optically clear coloured liquids (products) as X, Y, Z tristimulus values in transmission (FOREIGN STANDARD)
DIN EN 1557:1997
Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment; English version of DIN EN 1547 (FOREIGN STANDARD)
DIN EN 1547:2001
Railway applications - Noise emission - Characterisation of the dynamic properties of track sections for pass by noise measurements; German version EN 15461:2008 (Foreign Standard)
DIN EN 15461:2008
Thickness measurement of coatings and characterization of surfaces with surface waves - Part 2: Guide to the thickness measurement of coatings by photothermic method (FOREIGN STANDARD)
DIN EN 15042-2:2006
Thickness measurement of coatings and characterization of surfaces with surface waves - Part 1: Guide to the determination of elastic constants, density and thickness of films by laser induced surface acoustic waves (FOREIGN STANDARD)
DIN EN 15042-1:2006
Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 2: Flue gas noise emissions at the outlet of the heat generator; German version EN 15036-2:2006 (FOREIGN STANDARD)
DIN EN 15036-2:2006
Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 1: Airborne noise emissions from heat generators; German version EN 15036-1:2006 (FOREIGN STANDARD)
DIN EN 15036-1:2006
Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles; German version EN 1501-4:2007 (FOREIGN STANDARD)
DIN EN 1501-4:2008
Temperature control devices and temperature limiters for heat generating systems (FOREIGN STANDARD)
DIN EN 14597:2005
Non-destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Planar location of AE sources (FOREIGN STANDARD)
DIN EN 14584:2005
Metallic coatings on nonmetallic basis materials - Measurement of coating thickness - Microresistivity method (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 14571:2005
Surface treatment equipment - Noise test code for surface treatment equipment including its ancilliary handling equipment - Accuracy grades 2 and 3 (FOREIGN STANDARD)
DIN EN 14462:2005
Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3; English version EN 14462:2005/FprA1:2008 (Foreign Standard)
DIN EN 14462/A1:2009
Laboratory measurement of noise from waste water installations (FOREIGN STANDARD)
DIN EN 14366:2005
Heat meters - Part 6: Installation, commissioning, operational monitoring and maintenance; German version EN 1434-6:2007 (FOREIGN STANDARD)
DIN EN 1434-6:2007
Heat meters - Part 5: Initial verification tests; German version EN 1434-5:2007 (FOREIGN STANDARD)
DIN EN 1434-5:2007
Heat meters - Part 4: Pattern approval tests; German version EN 1434-4:2007 (FOREIGN STANDARD)
DIN EN 1434-4:2007
Heat meters - Part 2: Constructional requirements; German version EN 1434-2:2007, Corrigenda to DIN EN 1434-2:2007-05; German version EN 1434-2:2007/AC:2007 (FOREIGN STANDARD)
DIN EN 1434-2 Berichtigung 1:2008
Heat meters - Part 2: Constructional requirements; German version EN 1434-2:2007 (FOREIGN STANDARD)
DIN EN 1434-2:2007
Heat meters - Part 1: General requirements; German version EN 1434-1:2007 (FOREIGN STANDARD)
DIN EN 1434-1:2007
Measurement and assessment of personal exposures to incoherent optical radiation - Part 3: UV-Radiation emitted by the sun; German version EN 14255-3:2008 (FOREIGN STANDARD)
DIN EN 14255-3:2008
Measurement and assessment of personal exposures to incoherent optical radiation - Part 2: Visible and infrared radiation emitted by artificial sources in the workplace (FOREIGN STANDARD)
DIN EN 14255-2:2006
Measurement and assessment of personal exposures to incoherent optical radiation - Part 1: Ultraviolet radiation emitted by artificial sources in the workplace (FOREIGN STANDARD)
DIN EN 14255-1:2005
Thermal performance acceptance testing of mechanical draught series wet cooling towers (FOREIGN STANDARD)
DIN EN 13741:2004
Founding - Surface roughness inspection by visualtactile comparators (FOREIGN STANDARD)
DIN EN 1370:1997
DIN EN 13523-9:2001
Coil coated metals - Test methods - Part 9: Resistance to water immersion; English version of DIN EN 13523-9 (FOREIGN STANDARD)
DIN EN 13523-8:2002
Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog) (FOREIGN STANDARD)
DIN EN 13523-7:2001
Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); English version of DIN EN 13523-7 (FOREIGN STANDARD)
DIN EN 13523-6:2002
Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test) (FOREIGN STANDARD)
DIN EN 13523-5:2001
Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test); English version of DIN EN 13523-5 (FOREIGN STANDARD)
DIN EN 13523-4:2001
Coil coated metals - Test methods - Part 4: Pencil hardness; English version of DIN EN 13523-4 (FOREIGN STANDARD)
DIN EN 13523-3:2001
Coil coated metals - Test methods - Part 3: Colour difference; Instrumental comparison; English version of DIN EN 13523-3 (FOREIGN STANDARD)
DIN EN 13523-23:2002
Coil coated metals - Test methods - Part 23: Colour stability in humid atmospheres containing sulfur dioxide (FOREIGN STANDARD)
DIN EN 13523-22:2003
Coil coated metals - Test methods - Part 22: Colour difference; Visual comparison (FOREIGN STANDARD)
DIN EN 13523-21:2003
Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels (FOREIGN STANDARD)
DIN EN 13523-2:2001
Coil coated metals - Test methods - Part 2: Specular gloss; English version of DIN EN 13523-2 (FOREIGN STANDARD)
DIN EN 13523-18:2002
Coil coated metals - Test methods - Part 18: Resistance to staining (FOREIGN STANDARD)
DIN EN 13523-15:2002
Coil coated metals - Test methods - Part 15: Metamerism (FOREIGN STANDARD)
DIN EN 13523-14:2001
Coil coated metals - Test methods - Part 14: Chalking (Helmen method); English version of DIN EN 13523-14 (FOREIGN STANDARD)
DIN EN 13523-13:2001
Coil coated metals - Test methods - Part 13: Resistance to accelerated ageing by the use of heat (FOREIGN STANDARD)
DIN EN 13523-10:2001
Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV light and water condensation; English version of DIN EN 13523-10 (FOREIGN STANDARD)
DIN EN 13523-1:2001
Coil coated metals - Test methods - Part 1: Coating thickness; English version of DIN EN 13523-1 (FOREIGN STANDARD)
Heat exchangers - Forced convection air cooled refrigerant condensers and dry coolers - Sound measurement (FOREIGN STANDARD)
DIN EN 13487:2004
Temperature recorders and thermometers for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Periodic verification; English version of DIN EN 13486 (FOREIGN STANDARD)
DIN EN 13486:2002
Thermometers for measuring the air and product temperature for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Test, performance, suitability; English version of DIN EN 13485 (FOREIGN STANDARD)
DIN EN 13485:2002
Solar protection devices combined with glazing - Calculation of total solar energy transmittance and light transmittance - Part 2: Detailed calculation method; German version EN 13363-2:2005, Corrigenda to DIN EN 13363 (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 13363-2 Berichtigung 1:2007
Solar protection devices combined with glazing - Calculation of total solar energy transmittance and light transmittance - Part 2: Detailed calculation method (FOREIGN STANDARD)
DIN EN 13363-2:2005
Solar protection devices combined with glazing - Calculation of solar and light transmittance - Part 1: Simplified method; German version EN 13363-1:2003+A1:2007 (FOREIGN STANDARD)
DIN EN 13363-1:2007
DIN EN 13190:2002
Dial thermometers; English version of DIN EN 13190 (FOREIGN STANDARD)
Road and airfield surface characteristics - Test methods - Part 7: Irregularity measurement of pavement courses: The straightedge test (FOREIGN STANDARD)
DIN EN 13036-7:2003
Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test (FOREIGN STANDARD)
DIN EN 13036-4:2003
Road and airfieldsurface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique; English version of DIN EN 13036-1 (FOREIGN STANDARD)
DIN EN 13036-1:2001
Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 3: Presentation of data for emergency lighting of work places; German version EN 13032-3:2007 (FOREIGN STANDARD)
DIN EN 13032-3:2007
Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 2: Presentation of data for indoor and outdoor work places; German version EN 13032-2:2004, Corrigenda to DIN EN 1303 (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 13032-2 Berichtigung 1:2007
Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 2: Presentation of data for indoor and outdoor work places (FOREIGN STANDARD)
DIN EN 13032-2:2005
Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 1: Measurement and file format (FOREIGN STANDARD)
DIN EN 13032-1:2004
Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy categories 2 and 3 (FOREIGN STANDARD)
DIN EN 13023:2003
Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation; German version EN 1299:1997+A1:2008 (Foreign Standard)
DIN EN 1299:2009
Electrically propelled road vehicles - Airborne acoustical noise of vehicle during charging with on-board chargers - Determination of sound power level (FOREIGN STANDARD)
DIN EN 12736:2003
DIN EN 12697-13:2001
Bituminous mixtures - Test methods for hot mix asphalt - Part 13: Temperature measurement; English version of DIN EN 12697-13 (FOREIGN STANDARD)
Noise test code for fondry machines and equipment; English version of DIN EN 1265 (FOREIGN STANDARD)
DIN EN 1265:2000
Pressure gauges - Apparatus for inspection of pressure and/or inflation of tyres for motor vehicles - Metrology, requirements and testing (FOREIGN STANDARD)
DIN EN 12645:1998
Liquid pumps and pump units - Noise test code - Grade 2 and grade 3 of accuracy; English version of DIN EN 12639 (FOREIGN STANDARD)
DIN EN 12639:2000
DIN EN 12549:2008
Acoustics - Noise test code for fastener driving tools - Engineering method; German version EN 12549:1999+A1:2008 (Foreign Standard)
Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements; English version of DIN EN 12545 (FOREIGN STANDARD)
DIN EN 12545:2000
Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements; English version EN 12545:2000/prA1:2008 (FOREIGN STANDARD)
DIN EN 12545/A1:2008
DIN EN 12470-5:2003
Clinical thermometers - Part 5: Performance of infra-red ear thermometers (with maximum device) (FOREIGN STANDARD)
DIN EN 12470-4:2001
Clinical thermometers - Part 4: Performance of electrical thermometers for continous measurement; English version of DIN EN 12470-4 (FOREIGN STANDARD)
DIN EN 12470-4/A1:2009
Clinical thermometers - Part 4: Performance of electrical thermometers for continuous measurement; English version EN 12470-4:2000/prA1:2009 (Foreign Standard)
DIN EN 12470-3:2000
Clinical thermometers - Part 3: Performance of compact electrical thermometers (non-predictive and predictive) with maximum device; English version of DIN EN 12470-3 (FOREIGN STANDARD)
DIN EN 12470-3/A1:2009
Clinical thermometers - Part 3: Performance of compact electrical thermometers (non-predictive and predictive) with maximum device; English version EN 12470-3:2000/prA1:2009 (Foreign Standard)
DIN EN 12470-2:2001
Clinical thermometers - Part 2: Phase change-type (dot matrix) thermometers; English version of DIN EN 12470-2 (FOREIGN STANDARD)
DIN EN 12470-2/A1:2009
Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers; English version EN 12470-2:2000/prA1:2009 (Foreign Standard)
DIN EN 12470-1:2000
Clinical thermometers - Part 1: Metallic liquid-in-glass thermometers with maximum device; English version of DIN EN 12470-1 (FOREIGN STANDARD)
DIN EN 12470-1/A1:2009
Clinical thermometers - Part 1: Metallic liquid-in-glass thermometers with maximum device; English version EN 12470-1:2000/prA1:2009 (Foreign Standard)
DIN EN 12102:2008
Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling - Measurement of airborne noise - Determination of the sound power level; German version EN 12102:2008 (Foreign Sta
Safety of industrial trucks - Test methods for measuring noise emissions (FOREIGN STANDARD)
DIN EN 12053:2002
DIN EN 10318:2005
Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method (FOREIGN STANDARD)
Precision dial indicators - Analogue indicators with electrical limit contacts (FOREIGN STANDARD)
DIN 879-3:1999
Precision dial indicators - Analogue indicators (FOREIGN STANDARD)
DIN 879-1:1999
Geometrical product specifications (GPS) - Mechanical dial gauges - Limits for metrological characteristics (FOREIGN STANDARD)
DIN 878:2006
Inclination measuring instruments (levels) (FOREIGN STANDARD)
DIN 877:1986
Straightedges - Part 2: Knife-edge straightedges - Dimensions and technical delivery conditions (FOREIGN STANDARD)
DIN 874-2:2003
Straightedges - Part 1: Steel straight edges - Dimensions and technical delivery conditions (FOREIGN STANDARD)
DIN 874-1:2003
Micrometers - Special design external micrometers - Designs, requirements and testing (FOREIGN STANDARD)
DIN 863-3:1999
Vernier callipers; requirements and testing (FOREIGN STANDARD)
DIN 862:1988
Tolerances and limit deviations for sizes above 3150 mm up to 10000 mm; principles, standard tolerances and limit deviations (FOREIGN STANDARD)
DIN 7172:1991
General tolerances for linear and angular dimensions and geometrical tolerances (not to be used for new designs) (FOREIGN STANDARD)
DIN 7168:1991
Relationship between tolerances of size, form, and parallelism; envelope requirement without individual indication on the drawing (FOREIGN STANDARD)
DIN 7167:1987
Workshop Plug Gauges and Spherical End Measuring Rods for ISO Fit Dimensions from 1 to 500 mm Nominal Dimensions; Gauge Dimensions and Manufacturing Tolerances (FOREIGN STANDARD)
DIN 7164:1966
Workshop Gap Gauges and Check Gauges for ISO Fit Sizes from 1 to 500 mm Nominal Dimension; Gauge Dimensions and Manufacturing Tolerances (FOREIGN STANDARD)
DIN 7163:1966
Recommended Selection of Fits; Tolerance Zones, Allowances, Fit Tolerances (FOREIGN STANDARD)
DIN 7157:1966
Measuring Tapes of Steel with Winder Frames or Winder Cases (FOREIGN STANDARD)
DIN 6403:1976
DIN colour chart; specification of colour samples (FOREIGN STANDARD)
DIN 6164-2:1980
DIN colour chart; system based on the 2? standard colorimetric observer (FOREIGN STANDARD)
DIN 6164-1:1980
Testing of pigments; determination of hiding power value of pigmented media; colorimetric method (FOREIGN STANDARD)
DIN 55987:1981
Viscosimetry - Determination of viscosity and flow curves with rotational viscosimeters - Part 2: Viscosimeter calibration and determination of the uncertainty of measurement (FOREIGN STANDARD)
DIN 53019-2:2001
Viscometry - Measurement of viscosity using the Hoeppler falling-ball viscometer (FOREIGN STANDARD)
DIN 53015:2001
Survey of methods of measuring temperature by laser spectroscopy (FOREIGN STANDARD)
DIN 51866-1:2000
Viscometry - Determination of kinematic viscosity using the Ubbelohde viscometer - Calibration of viscometers and determination of uncertainty of measurement (FOREIGN STANDARD)
DIN 51562-4:1999
Viscometry; determination of kinematic viscosity using the Ubbelohde viscometer; viscosity relative increment at short flow times (FOREIGN STANDARD)
DIN 51562-3:1985
Viscometry; determination of kinematic viscosity using the Ubbelohde microviscometer (FOREIGN STANDARD)
DIN 51562-2:1988
Viscometry - Determination of kinematic viscosity using the Ubbelohde viscometer - Apparatus and measurement procedure (FOREIGN STANDARD)
DIN 51562-1:1999
DIN 50990:1993
Determination of mass per unit area of metallic coatings by flame atomic absorption spectrometry (FOREIGN STANDARD)
Measurement of coating thickness; Wedge cut method for measuring the thickness of paints and related coatings (FOREIGN STANDARD)
DIN 50986:1979
Measurement of coating thickness by differential measurement using a stylus instrument (FOREIGN STANDARD)
DIN 50933:1987
Surfaces of components used in mechanical engineering and light engineering; Terminology according to stress conditions (FOREIGN STANDARD)
DIN 4764:1982
Measurement and evaluation of low-frequency environmental noise (FOREIGN STANDARD)
DIN 45680:1997
Measurement of vibration immission - Part 2: Measuring method (FOREIGN STANDARD)
DIN 45669-2:2005
Mechanical vibration and shock measurement - Part 1: Measuring equipment (FOREIGN STANDARD)
DIN 45669-1:1995
Sound level meters - Additional requirements for special measuring tasks (FOREIGN STANDARD)
DIN 45657:2005
DIN 45645-2:1997
Determining noise rating levels from measured data - Part 2: Occupational noise (FOREIGN STANDARD)
DIN 45645-1:1996
Determining noise rating levels from measured data - Part 1: Environmental noise (FOREIGN STANDARD)
Measurement and assessment of aircraft noise; determination of rating level of aircraft noise exposure (FOREIGN STANDARD)
DIN 45643-3:1984
Measurement and assessment of aircraft noise; aircraft noise monitoring systems within the meaning of article 19a of the Luftverkehrsgesetz (Civil Aviation Law) (FOREIGN STANDARD)
DIN 45643-2:1984
Measurement and assessment of aircraft noise; quantities and parameters (FOREIGN STANDARD)
DIN 45643-1:1984
Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; outboard motors (FOREIGN STANDARD)
DIN 45635-57:1986
Measurement of noise emitted by machines; airborne noise emission; enveloping surface method and in-duct method; fan-assisted warm air generators, fan-assisted air heaters and fan units of air handling devices (FOREIGN STANDARD)
DIN 45635-56:1986
Measurement of noise emitted by machines; airborne noise measurement, enveloping surface method; valves (FOREIGN STANDARD)
DIN 45635-50:1987
Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; chimneys (FOREIGN STANDARD)
DIN 45635-47:1985
Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; cooling towers (FOREIGN STANDARD)
DIN 45635-46:1985
Measurement of airborne noise emitted by machines; enveloping surface method; continuous handling equipment (FOREIGN STANDARD)
DIN 45635-45:1988
Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; hydraulic assemblies (test report specimen form) (FOREIGN STANDARD)
DIN 45635-41 Beiblatt 1:1986
Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; hydraulic assemblies (FOREIGN STANDARD)
DIN 45635-41:1986
Measurement of noise emitted by machines; airborne noise emission; enveloping surface method, reverberation room method and in-duct method; fans (FOREIGN STANDARD)
DIN 45635-38:1986
Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; heat pump units with electrically driven compressors (FOREIGN STANDARD)
DIN 45635-35:1986
Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; flares (FOREIGN STANDARD)
DIN 45635-22:1985
Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Woodworking machines; Special specifications for two-side and multi-side planing and milling machine (FOREIGN STANDARD)
DIN 45635-1656:1982
Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Woodworking machines; Special specifications for final trimming machines and edge lipping and banding machines (FOREIGN STANDARD)
DIN 45635-1655:1982
Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Woodworking machines; Special specifications for multistage edge lipping and banding machines (FOREIGN STANDARD)
DIN 45635-1654:1982
Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Woodworking machines; Special specifications for double end shaping machines (FOREIGN STANDARD)
DIN 45635-1653:1982
Measurements of Airborne Noise Emitted by Machines; Enveloping Surface Method; Metal Processing Machine Tools; Special Stipulations for Universal Presses (FOREIGN STANDARD)
DIN 45635-1603:1978
Measurement of Airborne Noise Emitted by Machines; Enveloping Surface Method; Metal Processing Machine Tools; Special Stipulations for Drop Forging Hammers (FOREIGN STANDARD)
DIN 45635-1602:1978
Measurement of Airborne Noise Emitted by Machines; Enveloping Surface Method; Metal Processing Machine, Tools Special, Stipulations for Lathes (FOREIGN STANDARD)
DIN 45635-1601:1978
Measurement of Airborne Noise Emitted by Machines; Enveloping Surface Method, Machine Tools (FOREIGN STANDARD)
DIN 45635-16:1978
Measurement of airborne noise emitted by machines; enveloping surface method; turbogenerator sets for use in thermal power stations (FOREIGN STANDARD)
DIN 45635-15:1987
Noise Measurement on Machines; Airborne Noise Measurement, Enveloping Surface Method, Air-cooled Heat Exchangers (Air Coolers) (FOREIGN STANDARD)
DIN 45635-14:1980
Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Electrical switchgear and control gear (FOREIGN STANDARD)
DIN 45635-12:1978
Measurement of noise emitted by machines; airborne noise emission, enveloping surface method; internal combustion engines (FOREIGN STANDARD)
DIN 45635-11:1987
Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; basic method, divided into 3 grades of accuracy (FOREIGN STANDARD)
DIN 45635-1:1984
Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Test report (test record) form for enveloping surface method (FOREIGN STANDARD)
DIN 45635 Beiblatt 1:1979
Line scales and pointers for indicating electrical measuring instruments; scale graduation and numbering (FOREIGN STANDARD)
DIN 43802-4:1991
Line scales and pointers for indicating electrical measuring instruments; designs and dimensions (FOREIGN STANDARD)
DIN 43802-3:1991
Line scales and pointers for indicating electrical measuring instruments; general requirements (FOREIGN STANDARD)
DIN 43802-2:1991
Electrical measuring instruments; spiral springs; dimensions (FOREIGN STANDARD)
DIN 43801-1:1976
DIN 43790:1991
Basic principles for the design of line scales and pointers (FOREIGN STANDARD)
Measurement and control; electrical temperature sensors; fast response thermometers (FOREIGN STANDARD)
DIN 43771:1989
Measurement and control; electrical temperature sensors; thermometers not fitted with protecting tubes (FOREIGN STANDARD)
DIN 43769:1986
Measurement and control; electrical temperature sensors; welded-stem thermometers (FOREIGN STANDARD)
DIN 43767:1986
Measurement and control; electrical temperature sensors; threaded-stem thermometers with G 1 mounting thread (FOREIGN STANDARD)
DIN 43766:1986
Measurement and control; electrical temperature sensors; threaded-stem thermometers with G 1/2 mounting thread (FOREIGN STANDARD)
DIN 43765:1986
Measurement and control; electrical temperature sensors; straight thermometers with interchangeable sensor units (FOREIGN STANDARD)
DIN 43764:1986
Measurement and control; electrical temperature sensors; sensor units for resistance thermometers (FOREIGN STANDARD)
DIN 43762:1986
Measurement and control; electrical temperature sensors; Sensor units for thermocouple thermometers (FOREIGN STANDARD)
DIN 43735:1986
Measurement and control; electrical temperature sensors; thermocouples for thermocouple thermometers (FOREIGN STANDARD)
DIN 43732:1986
Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Plug Gauges (FOREIGN STANDARD)
DIN 40431-2:1972
Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Ring Gauges (FOREIGN STANDARD)
DIN 40431-1:1970
DIN 32937:2006
Control of inspection, measuring and test equipment - Plan, manage and use of inspection, measuring and test equipments (FOREIGN STANDARD)
Optoelectronic measurement of form, profile and distances (FOREIGN STANDARD)
DIN 32877:2000
Preferred Numbers and Series of Preferred Numbers; Introduction (FOREIGN STANDARD)
DIN 323-2:1974
Preferred Numbers and Series of Preferred Numbers; Basic Values, Calculated Values, Rounded Values (FOREIGN STANDARD)
DIN 323-1:1974
Radii on workpieces and their representation in technical drawings (FOREIGN STANDARD)
DIN 250:2002
NOT GO screw ring gauges for ISO metric screw threads with nominal diameters from 50 mm to 200 mm for use in precision engineering (FOREIGN STANDARD)
DIN 2299-2:1995
Geometrical product specifications (GPS) - "GO" screw ring gauges for ISO metric screw threads - Part 2: Nominal diameter over 50 mm up to 200 mm, precision mechanics (Foreign Standard)
DIN 2285-2:2008
Geometrical product specifications (GPS) - "GO" screw ring gauges for ISO metric screw threads - Part 1: Nominal diameter from 1 mm up to 200 mm, general purpose (Foreign Standard)
DIN 2285-1:2008
Geometrical product specifications (GPS) - NOT GO screw gauging members for workshop plug gauges and check plugs for ISO metric screw threads with nominal diameters over 40 mm up to 250 mm in precision engineering (FOREIGN STANDARD)
DIN 2284-3:2001
Geometrical product specifications (GPS) - NOT GO screw gauging members for workshop plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters over 40 mm up to 200 mm (FOREIGN STANDARD)
DIN 2284-2:2001
NOT GO screw gauging members for workshop plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters from 1 mm to 40 mm (FOREIGN STANDARD)
DIN 2284-1:2000
Geometrical product specifications (GPS) - NOT GO workshop screw plug gauges and check plug for ISO metric screw threads with nominal diameters over 40 mm up to 250 mm, for use in precision engineering (FOREIGN STANDARD)
DIN 2283-3:2001
Geometrical product specifications (GPS) - NOT GO workshop screw plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with diameters over 40 mm up to 200 mm (FOREIGN STANDARD)
DIN 2283-2:2001
Geometrical product specifications (GPS) - NOT GO workhop screw plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters from 1 mm up to 40 mm (FOREIGN STANDARD)
DIN 2283-1:2001
Geometrical product specifications (GPS) - GO screw gauging members for workshop plug gauges and check plugs for ISO metric screw threads with nominal diameters over 40 mm up to 250 mm, for use in precision engineering (FOREIGN STANDARD)
DIN 2282-3:2001
Geometrical product specifications (GPS) - GO screw gauging members for workshop plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters over 40 mm up to 200 mm (FOREIGN STANDARD)
DIN 2282-2:2001
GO screw gauging members for workshop plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters from 1 mm to 40 mm (FOREIGN STANDARD)
DIN 2282-1:2000
Geometrical product specifications (GPS) - GO workshop screw plug gauges and check plugs for ISO metric screw threads with nominal diameters over 40 mm up to 250 mm, for use in precision engineering (FOREIGN STANDARD)
DIN 2281-3:2001
Geometrical product specifications (GPS) - GO workshop screw plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters over 40 mm up to 200 mm (FOREIGN STANDARD)
DIN 2281-2:2001
Geometrical product specifications (GPS) - GO workshop screw plug gauges, check and setting plugs for general purpose ISO metric screw threads with nominal diameters from 1 mm up to 40 mm (FOREIGN STANDARD)
DIN 2281-1:2001
Geometrical product specifications (GPS) - GO and NOT GO screw plug gauges for general purpose ISO metric screw threads with nominal diameters from 1 mm up to 40 mm (FOREIGN STANDARD)
DIN 2280:2001
Geometrical product specifications (GPS) - Gauges for internal and external ISO metric screw threads - Overview of types, marking and application (FOREIGN STANDARD)
DIN 2279:2001
Dirt Grooves on Screw Thread Gauges for Screw Threads with ISO Metric Profile (FOREIGN STANDARD)
DIN 2278:1967
Inclination measuring systems; electronic inclination measuring systems; types and requirements (FOREIGN STANDARD)
DIN 2276-2:1986
Inclination measuring systems; cylindrical spirit level vials; dimensions and requirements (FOREIGN STANDARD)
DIN 2276-1:1986
Feeler Gauges (FOREIGN STANDARD)
DIN 2275:1977
Inspection vee blocks; designs, requirements (FOREIGN STANDARD)
DIN 2274:1981
Sine bars (FOREIGN STANDARD)
DIN 2273:1979
Inspection equipment used in dimensional metrology; requirements; auxiliary measuring devices (FOREIGN STANDARD)
DIN 2272-1:1985
Pneumatic Length Measurement (Air Gauging); General Information and Examples of Application (FOREIGN STANDARD)
DIN 2271-4:1977
Verification of geometrical parameters - Pneumatic length measurement (air gauging) - Part 3: Characteristics of instruments working in the high pressure range; requirements, testing (FOREIGN STANDARD)
DIN 2271-3:2000
Pneumatic Length Measurement (Air Gauging); Design Features of Instruments Working in the High Pressure Range (FOREIGN STANDARD)
DIN 2271-2:1976
Pneumatic Length Measurement (Air Gauging); Principles, Methods (FOREIGN STANDARD)
DIN 2271-1:1976
Lever gauges (FOREIGN STANDARD)
DIN 2270:1985
NOT GO ring gauges with nominal diameters from 1 mm to 315 mm, for use in precision engineering (FOREIGN STANDARD)
DIN 2254-2:1995
General purpose NOT GO ring gauges with nominal diameters from 1 mm to 315 mm (FOREIGN STANDARD)
DIN 2254-1:1995
Geometrical product specifications (GPS) - GO ring gauges and setting ring gauges - Part 2: From 1 mm up to 315 mm nominal diameter for precision mechanics (Foreign Standard)
DIN 2250-2:2008
Geometrical product specifications (GPS) - GO ring gauges and setting ring gauges - Part 1: From 1 mm up to 315 mm nominal diameter (Foreign Standard)
DIN 2250-1:2008
NOT GO gauging members with nominal diameters from 1 mm to 40 mm (FOREIGN STANDARD)
DIN 2249-1:2000
GO gauging members with nominal diameters from 1 mm to 40 mm (FOREIGN STANDARD)
DIN 2248-1:2000
Geometrical Product Specification (GPS) - Gauge handles for gauging members for use in precision engineering (FOREIGN STANDARD)
DIN 2240-3:2001
Geometrical product specification (GPS) - Gauge handles for gauging members over 40 mm nominal diameter: Handles, fixing screws and locking prongs (FOREIGN STANDARD)
DIN 2240-2:2001
Geometrical Product Specification (GPS) - Gauge handles for gauging members up to 40 mm nominal diameter with 1:50 taper shank (FOREIGN STANDARD)
DIN 2240-1:2001
DIN 18041:2004
Acoustical quality in small to medium-sized rooms (FOREIGN STANDARD)
Industrial liquid-in-glass thermometers with round or V-shaped cade; requirements and testing (FOREIGN STANDARD)
DIN 16195:1991
Industrial 135? angle stem liquid-in-glass thermometers with V-shaped case, of nominal size 200; dimensions and nominal ranges (FOREIGN STANDARD)
DIN 16191:1991
Industrial 90? angle stem liquid-in-glass thermometers with V-shaped case, of nominal size 200; dimensions and nominal ranges (FOREIGN STANDARD)
DIN 16190:1991
Industrial straight stem liquid-in-glass thermometers with V-shaped case, of nominal size 200; dimensions and nominal ranges (FOREIGN STANDARD)
DIN 16189:1991
Industrial 90? angle stem liquid-in-glass thermometers with V-shaped case, of nominal size 150; dimensions and nominal ranges (FOREIGN STANDARD)
DIN 16186:1991
Industrial straight stem liquid-in-glass thermometers with V-shaped case, of nominal size 150; dimensions and nominal ranges (FOREIGN STANDARD)
DIN 16185:1991
Industrial 90? angle stem liquid-in-glass thermometers with V-shaped case, of nominal size 110; dimensions and nominal ranges (FOREIGN STANDARD)
DIN 16182:1991
Industrial straight stem liquid-in-glass thermometers with V-shaped case, of nominal size 110; dimensions and nominal ranges (FOREIGN STANDARD)
DIN 16181:1991
Industrial 135 ? angle stem liquid-in-glass thermometers with round case, of nominal size 250; dimensions and nominal ranges (FOREIGN STANDARD)
DIN 16176:1991
Industrial 90? angle stem liquid-in-glass thermometers with round case, of nominal size 250; dimensions and nominal ranges (FOREIGN STANDARD)
DIN 16175:1991
Industrial straight stem liquid-in glass thermometer with round case, of nominal size 250; dimensions and nominal ranges (FOREIGN STANDARD)
DIN 16174:1991
Industrial 90? angle stem liquid-in-glass thermometers with round case, of nominal size 160; dimensions and nominal ranges (FOREIGN STANDARD)
DIN 16168:1991
Industrial straight stem liquid-in-glass thermometers with round case, of nominal size 160; dimensions anf nominal ranges (FOREIGN STANDARD)
DIN 16167:1991
DIN 16085:1995
Control pressure gauges (FOREIGN STANDARD)
Metric taper external and mating internal parallel screw thread - Gauges and gauging (FOREIGN STANDARD)
DIN 158-2:1997
DIN 1319-3:1996
Basic concepts in metrology - Evaluating measurements of a single measurand and expression of uncertainty (FOREIGN STANDARD)
Standard Tuning; Tuning Frequency for Organs (FOREIGN STANDARD)
DIN 1317-3:1962
Standard Tuning; Tuning-fork (FOREIGN STANDARD)
DIN 1317-2:1959
Standard Tuning; Standard Musical Pitch (FOREIGN STANDARD)
DIN 1317-1:1957
Mass, as weighed value, force, weight force, weight, load; concepts (FOREIGN STANDARD)
DIN 1305:1988
Electrical laboratory equipment; adjustable liquid-in-glass contact thermometers and control devices; general and safety requirements, testing (FOREIGN STANDARD)
DIN 12878:1980
ISO metric trapezoidal screw threads; gauging of external and internal threads; gauge dimensions and design features (FOREIGN STANDARD)
DIN 103-9:1985
Any question, send the mail to findstandards@tom.com directly
http://www.findstandards.info
http://www.findstandards.info/Standards/DIN%20Standards.htm
http://www.findstandards.info/Standards/BSI%20Standards.htm
http://www.findstandards.info/Standards/ASTM%20Standards.htm
http://www.findstandards.info/Standards/ISO%20Standards.htm
http://www.findstandards.info/Standards/SAE%20Standards.htm
http://www.findstandards.info/Standards/JIS%20Standards.htm
http://www.findstandards.info/Standards/NFPA%20Standards.htm
http://www.findstandards.info/Standards/IEEE%20Standards.htm
http://www.findstandards.info/Standards/API%20Standards.htm
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment