2009/09/07

Cheapest & Latest DIN Standard (PDF) (5)

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm

DIN 14097-1:2005
Firefigther training facilities - Part 1: General requirements (FOREIGN STANDARD)
DIN 14097-2:2005
Firefigther training facilities - Part 2: Gas-fuelled simulation devices (FOREIGN STANDARD)
DIN 14097-3:2005
Firefigther training facilities - Part 3: Wood-fired training facilities (FOREIGN STANDARD)
DIN 14097-4:2005
Firefigther training facilities - Part 4: Firefigther training houses (FOREIGN STANDARD)
DIN 14811:2008
Fire-fighting hoses - Non-percolating layflat delivery hoses and hose assemblies for pumps and vehicles (Foreign Standard)
DIN 18125-1:1997
Laboratory tests for determination of soil density (FOREIGN STANDARD)
DIN 18230-1:1998
Structural fire protection in industrial buildings - Determining the design fire resistance time (FOREIGN STANDARD)
DIN 18230-2:1999
Fire protection - Structural fire protection in industrial buildings - Determination of combustion factor to characterize in fire behaviour of stored materials (FOREIGN STANDARD)
DIN 19531-10:1999
Unplasticized polyvinyl chloride (PVC-U) pipes and fittings for drainage systems inside buildings - Part 10: Fire behaviour, quality control and installation (FOREIGN STANDARD)
Chlorinated polyvinyl chloride (PVC-C) pipes and fittings for hot water resistant drainage systems inside buildings - Part 10: Fire behaviour, quality control and installation (FOREIGN STANDARD)
DIN 19538-10:1999
DIN 19559-1:1983
Measurement of flow of waste water in open channels and gravity conduits; general information (FOREIGN STANDARD)
DIN 19559-2:1983
Measurement of flow of waste water in open channels and gravity conduits; venturi flumes (FOREIGN STANDARD)
Design of fixed granular-bed filters for water treatment (FOREIGN STANDARD)
DIN 19605:1995
DIN 19624:1976
Precoat Filters for Water Treatment (FOREIGN STANDARD)
DIN 19643-1:1997
Treatment and disinfection of water used in bathing facilities - General requirements (FOREIGN STANDARD)
DIN 19643-2:1997
Treatment and disinfection of water used in bathing facilities - Combined adsorption, coagulation, filtration and chlorination method (FOREIGN STANDARD)
DIN 19643-3:1997
Treatment and disinfection of water used in bathing facilities - Combined coagulation, filtration, ozonization, sorption filtration and chlorination method (FOREIGN STANDARD)
DIN 19643-4:1999
Treatment and disinfection of water used in bathing facilities - Combined coagulation, ozonization, multi-layer filtration and chlorination method (FOREIGN STANDARD)
DIN 19643-5:2000
Treatment and disinfection of water used in bathing facilities - Part 5: Combined coagulation, filtration, adsorption and chlorination method (FOREIGN STANDARD)
DIN 19645:2006
Treatment of spent filter backwash water from systems for treatment of water of swimming-pools and baths (Foreign Standard)
DIN 19683-9:1998
Soil testing in agricultural hydrology - Physical laboratory tests - Determining the water permeability of saturated core samples (FOREIGN STANDARD)
DIN 19730:1997
Extraction of trace elements in soils using ammonium nitrate solution (FOREIGN STANDARD)
DIN 19731:1998
Utilization of soil material (FOREIGN STANDARD)
DIN 19738:2004
Soil quality - Absorption availability of organic and inorganic pollutants from contaminated soil material (Foreign Standard)
DIN 1988-4:1988
Drinking water supply systems; drinking water protection and drinking water quality control (DVGW code of practice) (FOREIGN STANDARD)
DIN 1988-5:1988
Drinking water supply systems; pressure boosting and reduction (DVGW code of practice) (FOREIGN STANDARD)
DIN 1988-8:1988
Drinking water supply systems; operation (DVGW code of practice) (FOREIGN STANDARD)
DIN 1999-100:2003
Installations for separation of light liquids - Part 100: Requirements on application of installations for separation of light liquids in accordance with DIN EN 858-1 and DIN EN 858-2 (FOREIGN STANDARD)
DIN 2000:2000
Guidelines for drawing up requirements for the design, construction, operation and maintenance of public drinking water supply systems (DVGW Code of practice) (FOREIGN STANDARD)
DIN 23320-1:1998
Flameproof protective clothing for firefighters in the mining industry - Safety requirements and testing (FOREIGN STANDARD)
DIN 24420-1:1976
Lists of Spare Parts; General (FOREIGN STANDARD)
DIN 30750:2007
Mobil, non-sewer-connected toilet cabins - Standards and services provided for the employment of cabins and sanitary products (FOREIGN STANDARD)
DIN 33411-3:1986
Human physical strength; maximum static action moments applied by male operators when actuating hand-wheels (FOREIGN STANDARD)
DIN 33411-4:1987
Human physical strength; maximum static action forces (isodynes) (FOREIGN STANDARD)
Description of position, orientation and direction of movement of objects (FOREIGN STANDARD)
DIN 33417:1987
DIN 38402-1:1987
German standard methods for the examination of water, waste water and sludge; general information (group A); recording of analysis results (A 1) (FOREIGN STANDARD)
DIN 38402-13:1985
German standard methods for the examination of water, waste water and sludge; general information (group A); sampling from aquifers (A 13) (FOREIGN STANDARD)
DIN 38402-14:1986
German standard methods for the examination of water, waste water and sludge; general information (group A); sampling of untreated water and drinking water (A 14) (FOREIGN STANDARD)
DIN 38402-15:1986
German standard methods for the examination of water, waste water and sludge; general information (group A); sampling of flowing waters (A 15) (FOREIGN STANDARD)
DIN 38402-16:1987
German standard methods for the examination of water, waste water and sludge; general information (group A); sampling of sea water (A 16) (FOREIGN STANDARD)
DIN 38402-18:1991
German standard methods for the examination of water, waste water and sludge; general information (group A); sampling of water from mineral springs and spas (A 18) (FOREIGN STANDARD)
DIN 38402-20:1987
German standard methods for the examination of water, waste water and sludge; general information (group A); sampling of tidal waters (A 20) (FOREIGN STANDARD)
DIN 38402-30:1998
German standard methods for the examination of water, waste water and sludge - General information (group A) - Pretreatment, homogenization and division of non-homogeneous water samples (A 30) (FOREIGN STANDARD)
DIN 38402-41:1984
German standard methods for the examination of water, waste water and sludge; general information (group A); inter-laboratory tests; planning and organization (A 41) (FOREIGN STANDARD)
DIN 38402-45:2003
German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 45: Laboratory proficiency testing by interlaboratory comparisons (A 45) (FOREIGN STANDARD)
DIN 38402-51:1986
German standard methods for the examination of water, waste water and sludge; general information (group A); calibration of analytical methods, evaluation of analytical results and linear calibration functions used to (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN 38402-71:2002
German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 71: Procedure for verifying the equivalence of two analytical methods involving quantitative characte (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN 38404-10:1995
German standard methods for the examination of water, waste water and sludge - Physical and physicochemical parameters (group C) - Determination of calcite saturation of water (C 10) (FOREIGN STANDARD)
DIN 38404-13:1988
German standard methods for the examination of water, waste water and sludge; physical and physicochemical parameters (group C); determination of tritium (C 13) (FOREIGN STANDARD)
DIN 38404-15:1987
German standard methods for the examination of water, waste water and sludge; physical and physico-chemical parameters (group C); determination of beta activity per unit volume in drinking water, ground water, surface (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN 38404-16:1989
German standard methods for the examination of water, waste water and sludge; physical and physicochemical parameters (group C); determination of radionuclides in drinking water, ground water, surface water and waste w (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN 38404-18:1994
German standard methods for the examination of water, waste water and sludge - Physical and physicochemical parameters (group C) - Determination of radium 226 concentration in drinking water, ground water and waste water (C 18) (FOREIGN STANDARD)
DIN 38404-3:2005
German standard methods for the examination of water, waste water and sludge - Physical and physical-chemical parameters (group C) - Part 3: Determination of absorption in the range of the ultraviolet radiation, Spectr (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN 38404-4:1976
German Standard Methods for Analysing of Water, Waste Water and Sludge; Physical and Physical-chemical Parameters (Group C); Determination of Temperature (C4) (FOREIGN STANDARD)
DIN 38404-5:1984
German standard methods for examination of water, waste water and sludge; physical and physico-chemical characteristics (group C); determination of pH value (C5) (FOREIGN STANDARD)
DIN 38404-6:1984
German standard methods for the examination of water, waste water and sludge; physical and physico-chemical parameters (group C); determination of the oxidation reduction (redox) potential (C 6) (FOREIGN STANDARD)
DIN 38405-1:1985
German standard methods for the examination of water, waste water and sludge; anions (group D); determination of chloride ions (D 1) (FOREIGN STANDARD)
DIN 38405-13:1981
German Standard Methods for the Analysis of Water, Waste Water and Sludge; Anions (Group D); Determination of Cyanides (D 13) (FOREIGN STANDARD)
DIN 38405-14:1988
German standard methods for the examination of water, waste water and sludge; anions (group D); determination of cyanides in drinking water, and in groundwater and surface water with low pollution levels (D 14) (FOREIGN STANDARD)
DIN 38405-17:1981
German Standard Methods for the Analysis of Water, Waste Water and Sludge; Anions (Group D); Determination of Borate Ions (D 17) (FOREIGN STANDARD)
DIN 38405-21:1990
German standard methods for the examination of water, waste water and sludge; anions (group D); determination of dissolved silicate by spectrometry (D 21) (FOREIGN STANDARD)
DIN 38405-23:1994
German standard methods for the examination of water, waste water and sludge - Anions (group D) - Determination of selenium by atomic absorption spectrometry (AAS) (D 23) (FOREIGN STANDARD)
DIN 38405-24:1987
German standard methods for the examination of water, waste water and sludge; anions (group D); photometric determination of chromium(VI) using 1,5-diphenylcarbonohydrazide (D 24) (FOREIGN STANDARD)
DIN 38405-26:1989
German standard methods for the examination of water, waste water and sludge; anions (group D); determination of dissolved sulfide by spectrometry (D 26) (FOREIGN STANDARD)
DIN 38405-27:1992
German standard methods for the examination of water, waste water and sludge; anions (group D); determination of readily liberatet sulfide (D 27) (FOREIGN STANDARD)
DIN 38405-29:1994
German standard methods for the examination of water, waste water and sludge - Anions (group D) - Photometric determination of nitrate using sulfosalicylic acid (D 29) (modified version of ISO 7890-3:1988) (FOREIGN STANDARD)
DIN 38405-32:2000
German standard methods for the examination of water, waste water and sludge - Anions (group D) - Determination of antimony by atomic absorption spectrometry (D 32) (FOREIGN STANDARD)
DIN 38405-33:2001
German standard methods for the examination of water, waste water and sludge - Anions (group D) - Determination of iodide by photometry (D 33) (FOREIGN STANDARD)
DIN 38405-35:2004
German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 35: Determination of arsenic - Method by graphite furnace atomic absorption spectrometry (GF-AAS) (D 35) (FOREIGN STANDARD)
DIN 38405-4:1985
German standard methods for the examination of water, waste water and sludge; anions (group D); determination of fluoride (D 4) (FOREIGN STANDARD)
DIN 38405-5:1985
German standard methods for the examination of water, waste water and sludge; anions (group D); determination of sulfate ions (D 5) (FOREIGN STANDARD)
DIN 38405-7:2002
German standard methods for examination of water, waste water and sludge - Anions (group D) - Part 7: Determination of cyanides in low polluted water by ion chromatography or potentiometric titration (D 7) (FOREIGN STANDARD)
DIN 38406-11:1991
German standard methods for the examination of water, waste water and sludge; cations (group E); determination of nickel by atomic absorption spectrometry (AAS) (E 11) (FOREIGN STANDARD)
DIN 38406-13:1992
German standard methods for the examination of water, waste water and sludge; cations (group E); determination of potassium by atomic absorption spectrometry (AAS) using an air-acetylene flame (E 13) (FOREIGN STANDARD)
DIN 38406-14:1992
German standard methods for the examination of water, waste water and sludge; cations (group E); determination of sodium by atomic absorption spectrometry (ASS) using an air-acetylene flame (E 14) (FOREIGN STANDARD)
DIN 38406-16:1990
German standard methods for the examination of water, waste water and sludge; cations (group E); determination of zinc, cadmium, lead, copper, thallium, nickel, cobalt by voltammetry (E 16) (FOREIGN STANDARD)
DIN 38406-18:1990
German standard methods for the examination of water, waste water and sludge; cations (group E); determination of dissolved silver by atomic absorption spectrometry using electrothermal atomization (E 18) (FOREIGN STANDARD)
DIN 38406-2:1983
German standard methods for the examination of water, waste water and sludge; cations (group E); determination of manganese (E 2) (FOREIGN STANDARD)
DIN 38406-24:1993
German standard methods for the examination of water, waste water and sludge; cations (group E); determination of cobalt by atomic absorption spectrometry (AAS) (E 24) (FOREIGN STANDARD)
DIN 38406-26:1997
German standard methods for the examination of water, waste water and sludge - Cations (group E) - Determination of thallium by atomic absorption spectrometry (AAS) using a graphite furnace (E 26) (FOREIGN STANDARD)
DIN 38406-3:2002
German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 3: Determination of calcium and magnesium, complexometric tritation (E 3) (FOREIGN STANDARD)
DIN 38406-32:2000
German standard methods for the examination of water, waste water and sludge - Cations (group E) - Determination of iron by atomic absorption spectrometry (AAS) (E 32) (FOREIGN STANDARD)
DIN 38406-33:2000
German standard methods for the examination of water, waste water and sludge - Cations (group E) - Determination of manganese by atomic absorption spectrometry (E 33) (FOREIGN STANDARD)
DIN 38406-6:1998
German standard methods for the examination of water, waste water and sludge - Cations (group E) - Determination of lead by atomic absorption spectrometry (AAS) (E6) (FOREIGN STANDARD)
DIN 38406-7:1991
German standard methods for the examination of water, waste water and sludge; cations (group E); determination of copper by atomic absorption spectrometry (AAS) (E 7) (FOREIGN STANDARD)
DIN 38406-8:2004
German standard methods for examination of water, waste water and sludge - Cations (group E) - Part 8: Determination of zinc - Method by atomic absorption spectrometry (AAS) using an air-ethine flame (E 8) (FOREIGN STANDARD)
DIN 38407-14:1994
German standard methods for the examination of water, waste water and sludge - Substance group analysis (group F) - Determination of phenoxyalkanecarboxylic acids by gas chromatography and mass spectrometry after solid (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN 38407-16:1999
German standard methods for the examination of water, waste water and sludge - Substance group analysis (Group F) - Determination of aniline derivatives by gas chromatography (F 16) (FOREIGN STANDARD)
DIN 38407-17:1999
German standard methods for the examination of water, waste water and sludge - Substance group analysis (group F) - Part 17: Determination of selected nitroaromatics by gas chromatography (F 17) (FOREIGN STANDARD)
DIN 38407-2:1993
German standard methods for the examination of water, waste water and sludge; substance group analysis (group F); determination of low-volatility halogenated hydrocarbons by gas chromatography (F 2) (FOREIGN STANDARD)
DIN 38407-22:2001
German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 22: Determination of Glyphosate and Aminomethyl phosphic acid (AMPA) by high performance l (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN 38407-3:1998
German standard methods for the examination of water, waste water and sludge - Substance group analysis (group F) - Part 3: Determination of polychlorinated biphenyls (PCBs) by gas chromatography (F 3) (FOREIGN STANDARD)
DIN 38407-7:2000
German standard methods for the examination of water, waste water and sludge - Substance group analysis (group F) - Part 7: Determination of six polycyclic aromatic hydrocarbons (PAHs) in drinking and mineral water by (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN 38407-8:1995
German standard methods for the examination of water, waste water and sludge - Substance group analysis (group F) - Determination of six polycyclic aromatic hydrocarbons (PAHs) in water by means of high performance liq (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN 38407-9:1991
German standard methods for the examination of water, waste water and sludge; substance group analysis (group F); determination of benzene and some of its derivatives by gas chromatography (F 9) (FOREIGN STANDARD)
DIN 38408-3:1993
German standard methods for the examination of water, waste water and sludge - Gaseous components (group G) - Determination of ozone (G 3) (FOREIGN STANDARD)
DIN 38408-5:1990
German standard methods for the examination of water, waste water and sludge; gaseous components (group G); determination of chlorine dioxide (G 5) (FOREIGN STANDARD)
DIN 38409-1:1987
German standard methods for the examination of water, waste water and sludge; parameters characterizing effects and substances (group H); determination of total dry residue, filtrate dry residue and residue on ignition (H 1) (FOREIGN STANDARD)
DIN 38409-2:1987
German standard methods for the examination of water, waste water and sludge; parameters characterizing effects and substances (group H); determination of filterable matter and the residue on ignition (H 2) (FOREIGN STANDARD)
DIN 38409-20:1989
German standard methods for the examination of water, waste water and sludge; parameters characterizing effects and substances (group H); determination of substances that react with disulfine blue (H 20) (FOREIGN STANDARD)
DIN 38409-22:2001
German standard methods for the examination of water, waste water and sludge - Parameters characterizing effects and substances (group H) - Part 22: Determination of dissolved adsorbable and organically bound halogens (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN 38409-26:1989
German standard methods for the examination of water, waste water and sludge; parameters characterizing effects and substances (group H); determination of the bismut-chelating index I<(Index)BiK> (H 26) (FOREIGN STANDARD)
DIN 38409-41:1980
German Standard Methods for Examination of Water, Waste Water and Sludge; Summary Action and Material Characteristic Parameters (Group H); Determination of the Chemical Oxygen Demand (COD) in the Range over 15 mg/l (H41) (FOREIGN STANDARD)
DIN 38409-43:1981
German standard methods for the analysis of water, waste water and sludge; Summary action and material characteristic parameters (group H); Determination for the chemical oxygen demand (COD); short duration method (H 43) (FOREIGN STANDARD)
DIN 38409-44:1992
German standard methods for the examination of water, waste water and sludge; parameters characterizing effects and substances (group H); determination of the chemical oxygen demand (COD), ranging from 5 to 50 mg/l (H 44) (FOREIGN STANDARD)
DIN 38409-6:1986
German standard methods for the examination of water, waste water and sludge; summary indices of actions and substances (group H); water hardness (H 6) (FOREIGN STANDARD)
DIN 38409-7:2005
German standard methods for the examination of water, waste water and sludge - General measures of effects and substances (group H) - Part 7: Determination of acid and base capacity (H 7) (FOREIGN STANDARD)
DIN 38412-11:1982
German standard methods for the examination of water, waste water and sludge; Test methods using water organisms (group L); Determination of the effect on microcrustacea of substances contained in water (Daphnia short-time test) (L 11) (FOREIGN STANDARD)
DIN 38412-13:1983
German standard methods for the examination of water, waste water and sludge; test methods using water organisms (group L); determination of oxygen production and oxygen consumption in an aquatic environment (SPG and S (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN 38412-14:1983
German standard methods for the examination of water, waste water and sludge; test methods using water organisms (group L); determination of oxygen production by means of the light and dark bottle method under laborato (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN 38412-16:1985
German standard methods for the examination of water, waste water and sludge; test methods using water organisms (group L); determination of chlorophyll a in surface water (L 16) (FOREIGN STANDARD)
DIN 38412-26:1994
German standards methods for the examination of water, waste water and sludge - Bio-assays (group L) - Surfactant biodegradation and elimination test simulating municipal waste water treatment (L 26) (FOREIGN STANDARD)
DIN 38412-27:1992
German standard methods for the examination of water, waste water and sludge; bio-assays (group L); determination of the inhibitory effect of waste water on the oxygen consumption of Pseudomonas putida (L 27) (FOREIGN STANDARD)
DIN 38412-30:1989
German standard methods for the examiniation of water, waste water and sludge; bio-assays (group L); determining the tolerance of Daphnia to the toxicity of waste water by way of a dilution series (L 30) (FOREIGN STANDARD)
DIN 38412-31:1989
German standard methods for the examination of water, waste water and sludge; bio-assays (group L); determining the tolerance of fish to the toxicity of waste water by way of a dilution series (L 31) (FOREIGN STANDARD)
DIN 38412-33:1991
German standard methods for the examination of water, waste water and sludge; bio-assays (group L); determining the tolerance of green algae to the toxicity of waste water (Scenedesmus chlorophyll fluorescence test) by (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN 38412-37:1999
German standard methods for the examination of water, waste water and sludge - Bio-assays (group L) - Determination of the inhibitory effect of water on the growth of Photobacterium phosphoreum (cell multiplication inh (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN 38413-1:1982
German standard methods for the analysis of water, waste water and sludge; Individual components (Group P); Determination of hydrazine (P 1) (FOREIGN STANDARD)
DIN 38413-2:1988
German standard methods for the examination of water, waste water and sludge; individual constituents (group P); determination of vinyl chloride by headspace gas chromatography (P 2) (FOREIGN STANDARD)
DIN 38413-4:1986
German standard methods for the examination of water, waste water and sludge; individual constituents (group P); determination of carbon disulfide (P 4) (FOREIGN STANDARD)
DIN 38413-5:1990
German standard methods for the examination of water, waste water and sludge; individual constituents (group P); determination of ethylenediaminetetraacetic acid (EDTA) and nitrilotriacetic acid (NTA) by polarography (P 5) (FOREIGN STANDARD)
DIN 38413-8:2000
German standard methods for the examination of water, waste water and sludge - Single components (group P) - Part 8: Determination of nitrilotriacetic acid (NTA), ethylenedinitrilotetraacetic acid (EDTA) and diethylene (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN 38414-11:1987
German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); sampling of sediments (S 11) (FOREIGN STANDARD)
DIN 38414-12:1986
German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of phosphorus in sludges and sediments (S 12) (FOREIGN STANDARD)
DIN 38414-13:1992
German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); detection of salmonellae in disinfected sewage sludge (S 13) (FOREIGN STANDARD)
DIN 38414-15:1990
German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of the specific residual beta activity in sludge, sediment and suspended matter (S 15) (FOREIGN STANDARD)
DIN 38414-17:1989
German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of strippable and extractable organically bound halogens (S 17) (FOREIGN STANDARD)
DIN 38414-18:1989
German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of adsorbed organically bound halogens (AOX) (S 18) (FOREIGN STANDARD)
DIN 38414-19:1999
German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 19: Determination of the steam-volatile organic acids (S 19) (FOREIGN STANDARD)
DIN 38414-20:1996
German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Determination of six selected polychlorinated biphenyls by gas chromatography (S 20) (FOREIGN STANDARD)
DIN 38414-21:1996
German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Determination of six selected polycyclic aromatic hydrocarbons by high performance liquid chromatography ( (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN 38414-22:2000
German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 22: Freeze-drying of sludge and determination of freeze-drying residue (S 22) (FOREIGN STANDARD)
DIN 38414-23:2002
German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Determination of 15 polycyclic aromatic hydrocarbons by high performance liquid chromatography (HPLC) usin (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN 38414-24:2000
German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 24: Determination of polychlorinated dibenzodioxins (PCDDs) and polychlorinated dibenzofuranes (PCDFs) (S 24) (FOREIGN STANDARD)
DIN 38414-4:1984
German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of leachability by water (S 4) (FOREIGN STANDARD)
DIN 38414-6:1986
German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of oxygen consumption rate (S 6) (FOREIGN STANDARD)
DIN 38414-8:1985
German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of the amenability to anaerobic digestion (S 8) (FOREIGN STANDARD)
DIN 38414-9:1986
German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of the chemical oxygen demand (COD) (S 9) (FOREIGN STANDARD)
DIN 38415-1:1995
German standard methods for the examination of water, waste water and sludge - Bio-assays with microorganisms (group T) Determination of organophosphate and carbamate pesticides by the cholinesterase inhibition test (T 1) (FOREIGN STANDARD)
DIN 38415-3:1996
German standard methods for the examination of water, waste water and sludge - Bio-assays with microorganisms (group T) - Part 1: Determination of the mutagenic potential of water using the umu-test (T 3) (FOREIGN STANDARD)
DIN 38415-4:1999
German standard methods for the examination of water, waste water and sludge - Bioassays with microorganisms (group T) - Part 4: Determination of the mutagenic potential of water using the Salmonella microsome test (Ames Test) (T 4) (FOREIGN STANDARD)
DIN 38415-6:2003
German standard methods for the examination of water, waste water and sludge - Subanimal testing (group T) - Part 6: Determination of the effect of nonacute toxicity of waste water on the development of fish eggs (K 9) (FOREIGN STANDARD)
DIN 4040-100:2004
Grease separators - Part 100: Requirements on applications for separation of greases in accordance with DIN EN 1825-1 and DIN EN 1825-2 (FOREIGN STANDARD)
DIN 4102-1:1998
Fire behaviour of building materials and elements - Classification of building materials - Requirements and testing (FOREIGN STANDARD)
DIN 4102-11:1985
Fire behaviour of building materials and building components; pipe encasements, pipe bushings, service shafts and ducts, and barriers across inspection openings; terminology, requirements and testing (FOREIGN STANDARD)
DIN 4102-12:1998
Fire behaviour of building materials and elements - Fire resistance of electric cable systems required to maintain circuit integrity - Requirements and testing (FOREIGN STANDARD)
DIN 4102-13:1990
Fire behaviour of building materials and elements; fire resistant glazing; concepts, requirements and testing (FOREIGN STANDARD)
DIN 4102-14:1990
Fire behaviour of building materials and elements; determination of the burning behaviour of floor covering systems using a radiant heat source (FOREIGN STANDARD)
DIN 4102-15:1990
Fire behaviour of building materials and elements "Brandschacht" (FOREIGN STANDARD)
DIN 4102-16:1998
Fire behaviour of building materials and elements - 'Brandschacht' tests (FOREIGN STANDARD)
DIN 4102-17:1990
Fire behaviour of building materials and elements; determination of melting point of mineral fibre insulating materials; concepts, requirements and testing (FOREIGN STANDARD)
DIN 4102-2:1977
Fire Behaviour of Building Materials and Building Components; Building Components; Definitions, Requirements and Tests (FOREIGN STANDARD)
DIN 4102-3:1977
Fire Behaviour of Building Materials and Building Components; Fire Walls and Non-load-bearing External Walls; Definitions, Requirements and Tests (FOREIGN STANDARD)
DIN 4102-4:1994
Fire behaviour of building materials and elements - Overview and design of classified building materials, elements and components (FOREIGN STANDARD)
DIN 4102-5:1977
Fire Behaviour of Building Materials and Building Components; Fire Barriers, Barriers in Lift Wells and Glazings Resistant against Fire; Definitions, Requirements and Tests (FOREIGN STANDARD)
DIN 4102-6:1977
Fire Behaviour of Building Materials and Building Components; Ventilation Ducts; Definitions, Requirements and Tests (FOREIGN STANDARD)
DIN 4102-7:1998
Fire behaviour of building materials and elements - Roofing - Concepts, requirements and testing (FOREIGN STANDARD)
DIN 4102-8:2003
Fire behaviour of building materials and components - Part 8: Small scale test furnace (FOREIGN STANDARD)
DIN 4102-9:1990
Fire behaviour of building materials and elements; seals for cable penetrations; concepts, requirements and testing (FOREIGN STANDARD)
DIN 4150-2:1999
Structural vibration - Human exposure to vibration in buildings (FOREIGN STANDARD)
DIN 4918:1989
Screwed seamless casing pipes (FOREIGN STANDARD)
DIN 4942:1999
DN 50 to DN 200 screwed steel well tubing (FOREIGN STANDARD)
DIN 50050-1:1986
Testing of materials; burning behaviour of materials; small burning cabinet (FOREIGN STANDARD)
DIN 50050-2:1988
Testing the burning behaviour of materials; large burning cabinet (FOREIGN STANDARD)
DIN 50051:1977
Testing of Materials; Burning Behaviour of Materials; Burner (FOREIGN STANDARD)
Corrosion testing of drinking water distribution systems - Part 1: Determining changes to the composition of drinking water (FOREIGN STANDARD)
DIN 50931-1:1999
DIN 53438-1:1984
Testing of combustible materials; response to ignition by a small flame; general data (FOREIGN STANDARD)
DIN 53438-2:1984
Testing of combustible materials; response to ignition by a small flame; edge ignition (FOREIGN STANDARD)
DIN 53438-3:1984
Testing of combustible materials; response to ignition by a small flame; surface ignition (FOREIGN STANDARD)
DIN 54332:1975
Testing of Textiles; Determination of the Burning Behaviour of Textile Floor Coverings (FOREIGN STANDARD)
DIN 54836:1984
Testing of combustible materials; determination of ignition temperature (FOREIGN STANDARD)
Beverage dispensing systems - Accessories - Part 2: Performance requirements and test methods for apparatus for the detection of carbon dioxide (Foreign Standard)
DIN 6653-2:2004
DIN CWA 14247:2002
Water treatment membranes - Influence of materials on water intended for human consumption - Test method; English version CWA 14247:2001 (FOREIGN STANDARD)
DIN EN 1005-2:2009
Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery; German version EN 1005-2:2003+A1:2008 (Foreign Standard)
DIN EN 1005-3:2009
Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation; German version EN 1005-3:2002+A1:2008 (Foreign Standard)
DIN EN 1005-4:2009
Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery; German version EN 1005-4:2005+A1:2008 (Foreign Standard)
DIN EN 1005-5:2007
Safety of machinery - Human physical performance - Part 5: Risk assessment for repetitive handling at high frequency; German version EN 1005-5:2007 (FOREIGN STANDARD)
DIN EN 1021-2:2006
Furniture - Assessment of the ignitability of upholstered furniture - Part 2: Ignition source match flame equivalent (FOREIGN STANDARD)
DIN EN 1028-1:2008
Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements; German version EN 1028-1:2002+A1:2008 (Foreign Standard)
DIN EN 1028-1 Berichtigung 1:2009
Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements; German version EN 1028-1:2002+A1:2008, Corrigendum to DIN EN 1028-1:2008-09 (Foreign Standard)
DIN EN 1028-2:2008
Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification of general and safety requirements; German version EN 1028-2:2002+A1:2008 (FOREIGN STANDARD)
DIN EN 1028-2 Berichtigung 1:2009
Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification of general and safety requirements; German version EN 1028-2:2002+A1:2008, Corrigendum to DIN EN 1028-2:2008-06 (Foreign Standard)
DIN EN 1032:2009
Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value; German version EN 1032:2003+A1:2008 (Foreign Standard)
DIN EN 1037:2008
Safety of machinery - Prevention of unexpected start-up; German version EN 1037:1995+A1:2008 (Foreign Standard)
DIN EN 1047-1:2006
Secure storage units - Classification and methods of test for resistance to fire - Part 1: Data cabinets and diskette inserts (FOREIGN STANDARD)
DIN EN 1047-2:2000
Secure storage units - Classification and methods of tests for resistance to fire - Part 2: Data rooms and data containes; English version of DIN EN 1047-2 (FOREIGN STANDARD)
DIN EN 1063:2000
Glass in building - Security glazing - Testing and classification of resistance against bullet attack; English version of DIN EN 1063 (FOREIGN STANDARD)
DIN EN 1073-1:1998
Protective clothing against radioactive contamination - Part 1: Requirements and test methods for ventilated protective clothing against particulate radioactive contamination (FOREIGN STANDARD)
DIN EN 1073-2:2002
Protective clothing against radioactive contamination - Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination (FOREIGN STANDARD)
DIN EN 1076:1997
Pumped sorbent tubes for the determination of gases and vapours at the workplace - Requirements and test methods (includes Corrigendum AC:1997) (FOREIGN STANDARD)
DIN EN 1077:2007
Helmets for alpine skiers and swowboarders; German version EN 1077:2007 (FOREIGN STANDARD)
DIN EN 1078:2006
Helmets for pedal cyclists and for users of skateboards and roller skates (FOREIGN STANDARD)
DIN EN 1080:2006
Impact protection helmets for young children (FOREIGN STANDARD)
DIN EN 1082-1:1997
Gloves and arm guards protecting against cuts and stabs by hand knives - Part 1: Chain mail gloves and arm guards (FOREIGN STANDARD)
DIN EN 1082-2:2000
Gloves and arm guards protecting against cuts and stabs by hand knives - Part 2: Gloves and arm guards made of material other than chain mail; English version of DIN EN 1082-2 (FOREIGN STANDARD)
DIN EN 1082-3:2000
Gloves and arm guards protecting against cuts and stabs by hand knives - Part 3: Impact cut test for fabric, leather and other materials; English version DIN EN 1082-3 (FOREIGN STANDARD)
DIN EN 1088:2008
Safety of machinery - Interlocking devices associated with guards - Principles for design and selection; German version EN 1088:1995+A2:2008 (Foreign Standard)
DIN EN 1093-1:2009
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods; German version EN 1093-1:2008 (Foreign Standard)
DIN EN 1093-11:2008
Safety of machinery - Evaluation of the emission of airbone hazardous substances - Part 11: Decontamination index; German version EN 1093-11:2001+A1:2008 (Foreign Standard)
DIN EN 1093-2:2008
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant; German version EN 1093-2:2006+A1:2008 (Foreign Standard)
DIN EN 1093-2 Berichtigung 1:2009
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant; German version EN 1093-2:2006+A1:2008, Corrigendum to DIN EN 1093-2:2008-09 (Forei
DIN EN 1093-3:2008
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant; German version EN 1093-3:2006+A1:2008 (Foreign Standard)
DIN EN 1093-3 Berichtigung 1:2009
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant; German version EN 1093-3:2006+A1:2008, Corrigendum to DIN EN 1093-3:2008-09 (Forei
DIN EN 1093-4:2008
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method; German version EN 1093-4:1996+A1:2008 (Foreign Standard)
DIN EN 1093-4 Berichtigung 1:2009
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method; German version EN 1093-4:1996+A1:2008, Corrigendum to DIN EN 1093-4:2008-09 (Foreign Standard)
DIN EN 1093-6:2008
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet; German version EN 1093-6:1998+A1:2008 (Foreign Standard)
DIN EN 1093-7:2008
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet; German version EN 1093-7:1998+A1:2008 (Foreign Standard)
DIN EN 1093-8:2008
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Pollutant concentration parameter, test bench method; German version EN 1093-8:1998+A1:2008 (Foreign Standard)
DIN EN 1093-9:2008
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Pollutant concentration parameter, room method; German version EN 1093-9:1998+A1:2008 (Foreign Standard)
Deck safety harness and safety line for use on recreational craft - Safety requirements and test methods (FOREIGN STANDARD)
DIN EN 1095:1998
DIN EN 1101:2005
Textiles and textile products - Burning behaviour - Curtains and drapes - Detailed procedure to determine the ignitability of vertically oriented specimens (small flame) (FOREIGN STANDARD)
Burning behaviour of curtains and drapes - Detailed method of determining the flame spread of vertically oriented specimens (FOREIGN STANDARD)
DIN EN 1102:1996
DIN EN 1103:2006
Textiles - Fabrics for apparel - Detailed procedure to determine the burning behaviour (FOREIGN STANDARD)
DIN EN 1127-1:2008
Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology; German version EN 1127-1:2007 (FOREIGN STANDARD)
DIN EN 1127-2:2008
Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining; German version EN 1127-2:2002 + A1:2008 (FOREIGN STANDARD)
DIN EN 1143-1:2006
Secure storage units - Requirements, classification and methods of test for resistance to burglary - Part 1: Safes, ATM safes, strongroom doors and strongrooms (FOREIGN STANDARD)
DIN EN 1143-2:2002
Secure storage units - Requirements, classification and methods of tests for resistance to burglary - Part 2: Deposit systems (FOREIGN STANDARD)
DIN EN 1146:2005
Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape - Requirements, testing, marking (FOREIGN STANDARD)
DIN EN 1147:2000
Portable ladders for fire service use; English version of DIN EN 1147 (FOREIGN STANDARD)
DIN EN 1149-1:2006
Protective clothing - Electrostatic properties - Part 1: Test method for measurement of surface resistivity; German version EN 1149-1:2006 (FOREIGN STANDARD)
DIN EN 1149-2:1997
Electrostatic properties of protective clothing - Part 2: Test method for measurement of the electrical resistance through a material (vertical resistance) (FOREIGN STANDARD)
DIN EN 1149-3:2004
Protective clothing - Electrostatic properties - Part 3: Test methods for measurement of charge decay (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 1150:1999
Protective clothing - Visibility clothing for non-professional use - Test methods and requirements (FOREIGN STANDARD)
DIN EN 12021:1999
Respiratory protective devices - Compressed air for breathing apparatus (FOREIGN STANDARD)
DIN EN 12065:1998
Installations and equipment for liquefied natural gas - Testing of foam concentrates designed for generation of medium and high expansion foam and of extinguishing powders used on liquefied natural gas fires (FOREIGN STANDARD)
DIN EN 12083:1998
Respiratory protective devices - Filters with breathing hoses (non-mask mounted) - Particle filters, gas filters and combined filters - Requirements, testing, marking (FOREIGN STANDARD)
DIN EN 12094-1:2003
Fixed firefighting systems - Components for gas extinguishing systems - Part 1: Requirements and test methods for electrical automatic control and delay devices (FOREIGN STANDARD)
DIN EN 12094-10:2003
Fixed firefighting systems - Components for gas extinguishing systems - Part 10: Requirements and test methods for pressure gauges and pressure switches (FOREIGN STANDARD)
DIN EN 12094-11:2003
Fixed firefighting systems - Components for gas extinguishing systems - Part 11: Requirements and test methods for mechanical weighing devices (FOREIGN STANDARD)
DIN EN 12094-12:2003
Fixed firefighting systems - Components for gas extinguishing systems - Part 12: Requirements and test methods for pneumatic alarm devices (FOREIGN STANDARD)
DIN EN 12094-13:2001
Fixed firefighting systems - Components for gas extinguishing systems - Part 13: Requirements and test methods for check valves and non-return valves; English version of DIN EN 12094-13 (FOREIGN STANDARD)
DIN EN 12094-16:2003
Fixed firefighting systems - Components for gas extinguishing systems - Part 16: Requirements and test methods for odorizing devices for CO<(Index)2> low pressure systems (FOREIGN STANDARD)
DIN EN 12094-2:2003
Fixed firefighting systems - Components for gas extinguishing systems - Part 2: Requirements and test methods for non-electrical automatic control and delay devices (FOREIGN STANDARD)
DIN EN 12094-3:2003
Fixed firefighting systems - Components for gas extinguishing systems - Part 3: Requirements and test methods for manual triggering and stop devices (FOREIGN STANDARD)
DIN EN 12094-4:2004
Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators (FOREIGN STANDARD)
DIN EN 12094-5:2006
Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators; German version EN 12094-5:2006 (FOREIGN STANDARD)
DIN EN 12094-6:2006
Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices; German version EN 12094-6:2006 (FOREIGN STANDARD)
DIN EN 12094-8:2006
Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors; German version EN 12094-8:2006 (FOREIGN STANDARD)
DIN EN 12094-9:2003
Fixed firefighting systems - Components for gas extinguishing systems - Part 9: Requirements and test methods for special fire detectors (FOREIGN STANDARD)
DIN EN 12096:1997
Mechanical vibration - Declaration and verification of vibration emission values (FOREIGN STANDARD)
DIN EN 12101-1:2006
Smoke and heat control systems - Part 1: Specification for smoke barriers; German version EN 12101-1:2005 + A1:2006 (FOREIGN STANDARD)
DIN EN 12101-10:2006
Smoke and heat control systems - Part 10: Power supplies (FOREIGN STANDARD)
DIN EN 12101-2:2003
Smoke and heat control systems - Part 2: Specification for natural smoke and heat exhaust ventilators (FOREIGN STANDARD)
DIN EN 12101-3:2002
Smoke and heat control systems - Part 3: Specification for powered smoke and heat exhaust ventilators (FOREIGN STANDARD)
DIN EN 12101-3 Berichtigung 1:2006
Smoke and heat control systems - Part 3: Specification for powered smoke and heat exhaust ventilators; German version EN 12101-3:2002, Corrigenda to DIN EN 12101-3:2002-06; German version EN 12101-3:2002/AC:2005 (FOREIGN STANDARD)
DIN EN 12101-6:2005
Smoke and heat control systems - Part 6: Specification for pressure differential systems, Kits (FOREIGN STANDARD)
Characterization of sludge - Determination of pH-value (FOREIGN STANDARD)
DIN EN 12176:1998
DIN EN 12198-1:2008
Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles; German version EN 12198-1:2000+A1:2008 (Foreign Standard)
DIN EN 12198-2:2008
Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure; German version EN 12198-2:2002+A1:2008 (Foreign Standard)
DIN EN 12198-3:2008
Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening; German version EN 12198-3:2002+A1:2008 (Foreign Standard)
DIN EN 12254 Berichtigung 1:2009
Screens for laser working places - Safety requirements and testing; German version EN 12254:1998+A2:2008, Corrigendum to DIN EN 12254:2008-04 (Foreign Standard)
DIN EN 12255-1:2002
Wastewater treatment plants - Part 1: General construction principles; English version of DIN EN 12255-1 (FOREIGN STANDARD)
DIN EN 12255-10:2001
Wastewater treatment plants - Part 10: Safety principles; English version of DIN EN 12255-10 (FOREIGN STANDARD)
DIN EN 12255-11:2001
Wastewater treatment plants - Part 11: General data required; English version of DIN EN 12255-11 (FOREIGN STANDARD)
DIN EN 12255-12:2003
Wastewater treatment plants - Part 12: Control and automation (FOREIGN STANDARD)
DIN EN 12255-13:2003
Wastewater treatment plants - Part 13: Chemical treatment; Treatment of wastewater by precipitation/flocculation (FOREIGN STANDARD)
DIN EN 12255-14:2004
Wastewater treatment plants - Part 14: Disinfection (FOREIGN STANDARD)
DIN EN 12255-15:2004
Wastewater treatment plants - Part 15: Measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants (FOREIGN STANDARD)
DIN EN 12255-16:2005
Wastewater treatment plants - Part 16: Physical (mechanical) filtration (FOREIGN STANDARD)
DIN EN 12255-3:2001
Wastewater treatment plants - Part 3: Preliminary treatment (includes corrigendum AC:2000); English version of DIN EN 12255-3:2000 + AC:2000 (FOREIGN STANDARD)
DIN EN 12255-4:2002
Wastewater treatment plants - Part 4: Primary settlement; English version of DIN EN 12255-4 (FOREIGN STANDARD)
DIN EN 12255-5:1999
Wastewater treatment plants - Part 5: Lagooning processes (FOREIGN STANDARD)
DIN EN 12255-6:2002
Wastewater treatment plants - Part 6: Activated sludge process; English version of DIN EN 12255-6 (FOREIGN STANDARD)
DIN EN 12255-7:2002
Wastewater treatment plants - Part 7: Biological fixed-film reactors; English version of DIN EN 12255-7 (FOREIGN STANDARD)
DIN EN 12255-8:2001
Wastewater treatment plants - Part 8: Sludge treatment and storage; English version of DIN EN 12255-8 (FOREIGN STANDARD)
DIN EN 12255-9:2002
Wastewater treatment plants - Part 9: Odour control and ventilation; English version of DIN EN 12255-9 (FOREIGN STANDARD)
DIN EN 12259-1:2006
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 1: Sprinklers (FOREIGN STANDARD)
DIN EN 12259-2/A2:2006
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies (FOREIGN STANDARD)
DIN EN 12259-3/A2:2006
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 3: Dry alarm valve assemblies (FOREIGN STANDARD)
DIN EN 12259-3:2001
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 3: Dry alarm valve assemblies (includes Amendment A1:2001); English version of DIN EN 12259-3:2000 + A1:2001 (FOREIGN STANDARD)
DIN EN 12259-4:2001
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 4: Water motor alarms (includes Amendment A1:2001); English version of DIN EN 12259-4:2000 + A1:2001 (FOREIGN STANDARD)
DIN EN 12259-5:2002
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 5: Water flow detectors (FOREIGN STANDARD)
DIN EN 12260:2003
Water quality - Determination of nitrogen - Determination of bound nitrogen (TN<(Index)b>), following oxidation to nitrogen oxides (FOREIGN STANDARD)
DIN EN 12285-1:2003
Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids (FOREIGN STANDARD)
DIN EN 12285-2:2005
Workshop fabricated steel tanks - Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids (FOREIGN STANDARD)
DIN EN 1231:1997
Workplace atmospheres - Short term detector tube measurement systems - Requirements and test methods (FOREIGN STANDARD)
DIN EN 1232:1997
Workplace atmospheres - Pumps for personal sampling of chemical agents - Requirements and test methods (FOREIGN STANDARD)
Determination of chromium content of water by atomic absorption spectrometry (FOREIGN STANDARD)
DIN EN 1233:1996
DIN EN 12338:1998
Water quality - Determination of mercury - Enrichment methods by amalgamation (FOREIGN STANDARD)
Air quality - Determination of the PM10 fraction of suspended particulate matter - Reference method and field test procedure to demonstrate reference equivalence of measurement methods (FOREIGN STANDARD)
DIN EN 12341:1999
DIN EN 12416-1:2007
Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods for components; German version EN 12416-1:2001+A2:2007 (FOREIGN STANDARD)
DIN EN 12416-2:2007
Fixed firefighting systems - Powder systems - Part 2: Design, construction and maintenance; German version EN 12416-2:2001+A1:2007 (FOREIGN STANDARD)
Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solids ratio of 2 l/kg for materials with high solids content and (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 12457-1:2003
Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 2: One-stage batch test at a liquid to solids ratio of 10 l/kg for materials with a particle size below (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 12457-2:2003
Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 3: Two-stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solids c (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 12457-3:2003
Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 4: One-stage batch test at a liquid to solids ratio of 10 l/kg for materials with particle size below 10 (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 12457-4:2003
DIN EN 12477:2005
Protective gloves for welders (FOREIGN STANDARD)
DIN EN 12492:2003
Mountaineering equipment - Helmets for mountaineers - Safety requirements and test methods (includes Amendment A1:2002) (FOREIGN STANDARD)
Characterization of waste - Analysis of eluates - Determination of pH, As, Ba, Cd, CI<(hoch)->, Co, Cr, Cr(VI), Cu, Mo, Ni, NO<(Index)2><(hoch)->, Pb, total S, SO<(Index)4>2<(hoch)->, V and Zn (FOREIGN STANDARD)
DIN EN 12506:2003
DIN EN 12561-1:1999
Railway applications - Tank wagons - Part: 1: Marking of tank wagons for the carriage of dangerous goods (FOREIGN STANDARD)
DIN EN 12561-2:2003
Railway applications - Tank wagons - Part 2: Bottom emptying devices for liquid products including vapour return (FOREIGN STANDARD)
DIN EN 12561-3:2003
Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure (FOREIGN STANDARD)
DIN EN 12561-4:2003
Railway applications - Tank wagons - Part 4: Top devices for top emptying and filling of liquid products (FOREIGN STANDARD)
DIN EN 12561-5:2003
Railway applications - Tank wagons - Part 5: Top devices for bottom emptying and top filling of liquid products (FOREIGN STANDARD)
DIN EN 12561-6:2003
Railway applications - Tank wagons - Part 6: Manholes (FOREIGN STANDARD)
DIN EN 12566-3:2005
Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants (FOREIGN STANDARD)
DIN EN 12566-4:2008
Small wastewater treatment systems for up to 50 PT - Part 4: Septic tanks assembled in situ from prefabricated kits; German version EN 12566-4:2007 (FOREIGN STANDARD)
DIN EN 12568:1998
Foot and leg protectors - Requirements and test methods for toecaps and metal penetration resistant inserts (FOREIGN STANDARD)
DIN EN 12574-1:2006
Stationary waste containers - Part 1: Containers with a capacity up to 10 000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting device - Dimensions and design; German version EN 12574-1:2006 (FOREIGN STANDARD)
DIN EN 12574-2:2006
Stationary waste containers - Part 2: Performance requirements and test methods (FOREIGN STANDARD)
DIN EN 12574-3:2006
Stationary waste containers - Part 3: Safety and health requirements (FOREIGN STANDARD)
DIN EN 12613:2001
Plastics warning devices with visual characteristics for underground cables and pipelines; English version of DIN EN 12613 (FOREIGN STANDARD)
Determination of the mass concentration of total gaseous organic carbon at low concentrations in flue gases - Continuous flame ionisation detector method (FOREIGN STANDARD)
DIN EN 12619:1999
DIN EN 1263-1:2002
Safety nets - Part 1: Safety requirements, test methods (FOREIGN STANDARD)
DIN EN 1263-2:2002
Safety nets - Part 2: Safety requirements for the positioning limits (FOREIGN STANDARD)
DIN EN 12673:1999
Water quality - Gas chromatographic determination of some selected chlorophenols in water (FOREIGN STANDARD)
Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone, family B, type A (FOREIGN STANDARD)
DIN EN 12729:2003
DIN EN 12753:2005
Termical cleaning systems for exhaust gas from surface treatment equipment - Safety requirements (FOREIGN STANDARD)
DIN EN 12816:2001
Transportable refillable steel and aluminium LPG cylinders - Disposal; English version of DIN EN 12816 (FOREIGN STANDARD)
DIN EN 12841:2006
Personal fall protection equipment - Rope access systems - Rope adjustment devices; German version EN 12841:2006 (FOREIGN STANDARD)
DIN EN 12873-1:2004
Influence of materials on water intended for human consumption - Influence due to migration - Part 1: Test method for non-metallic and non-cementitious factory made products (FOREIGN STANDARD)
DIN EN 12873-2:2005
Influence of materials on water intended for human consumption - Influence due to migration - Part 2: Test method for non-metallic and non-cementitious site-applied materials (FOREIGN STANDARD)
DIN EN 12873-3:2006
Influence of materials on water intended for human consumption - Influence due to migration - Part 3: Test method for ion exchange and adsorbent resins; German version EN 12873-3:2006 (FOREIGN STANDARD)
DIN EN 12873-4:2006
Influence of materials on water intended for human consumption - Influence due to migration - Part 4: Test method for water treatment membranes; German version EN 12873-4:2006 (FOREIGN STANDARD)
Characterization of sludges - Determination of the loss on ignition of dry mass; English version of DIN EN 12879 (FOREIGN STANDARD)
DIN EN 12879:2001
Characterization of sludges - Determination of dry residue and water content; English version of DIN EN 12880 (FOREIGN STANDARD)
DIN EN 12880:2001
Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests; English version EN 12881-1:2005/prA1:2007 (FOREIGN STANDARD)
DIN EN 12881-1/A1:2008
Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests (FOREIGN STANDARD)
DIN EN 12881-1:2006
Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test; English version EN 12881-2:2005/prA1:2007 (FOREIGN STANDARD)
DIN EN 12881-2/A1:2008
Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test (FOREIGN STANDARD)
DIN EN 12881-2:2005
Conveyor belts for general purpose use - Electrical and flammability safety requirements; English version of DIN EN 12882 (FOREIGN STANDARD)
DIN EN 12882:2002
Determination of parathion, parathion-methyl and some other organophosphorus compounds in water by dichloromethane extraction and gas chromatographic analyses (FOREIGN STANDARD)
DIN EN 12918:1999
DIN EN 12919:1999
Workplace atmospheres - Pumps for the sampling of chemical agents with a volume flow rate of over 5 l/min - Requirements and test methods (FOREIGN STANDARD)
Characterization of waste - Methodology for the determination of the leaching behaviour of waste under specified conditions; German version EN 12920:2006+A1:2008 (Foreign Standard)
DIN EN 12920:2008
DIN EN 12940:2004
Footwear manufacturing wastes - Waste classification and management (FOREIGN STANDARD)
DIN EN 12941:2009
Respiratory protective devices - Powered filtering devices incorporating a helmet or a hood - Requirements, testing, marking; German version EN 12941:1998+A1:2003+A2:2008 (Foreign Standard)
DIN EN 12942:2009
Respiratory protective devices - Power assisted filtering devices incorporating full face masks, half masks or quarter masks - Requirements, testing, marking; German version EN 12942:1998+A1:2002+A2:2008 (Foreign Standard)
DIN EN 12952-12:2003
Water-tube boilers and auxiliary installations - Part 12: Requirements for boiler feedwater and boiler water quality (FOREIGN STANDARD)
DIN EN 12953-10:2003
Shell boilers - Part 10: Requirements for boiler feedwater and boiler water quality (FOREIGN STANDARD)
DIN EN 12972:2007
Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks; German version EN 12972:2007 (FOREIGN STANDARD)
DIN EN 1300:2004
Secure storage units - Classification for high security locks according to their resistance to unauthorized opening (FOREIGN STANDARD)
DIN EN 13034:2005
Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB[6] equipment) (FOREIGN STANDARD)
DIN EN 13052-1:2001
Influence of organic materials on water intended for human consumption - Organic materials; Determination of colour and turbidity of water in piping systems - Part 1: Test method; English version of DIN EN 13052-1 (FOREIGN STANDARD)
DIN EN 13059:2002
Safety of industrial trucks - Test methods for measuring vibration (FOREIGN STANDARD)
DIN EN 13061:2002
Protective clothing - Shin guards for association football players - Requirements and test methods; English version of DIN EN 13061 (FOREIGN STANDARD)
DIN EN 13071-1:2008
Stationary waste containers up to 5000 l, top lifted and bottom emptied - Part 1: General requirements; German version EN 13071-1:2008 (Foreign Standard)
DIN EN 13071-2:2008
Stationary waste containers up to 5000 l, top lifted and bottom emptied - Part 2: Additional requirements for underground or partly underground systems; German version EN 13071-2:2008 (Foreign Standard)
Devices to prevent pollution by backflow of potable water - Air gap with non-circular overflow (unrestricted) - Family A, Type B; German version EN 13077:2008 (Foreign Standard)
DIN EN 13077:2008
Devices to prevent pollution by backflow of potable water - Air gap with submerged feed incorporating air inlet plus overflow - Family A, type C (FOREIGN STANDARD)
DIN EN 13078:2004
Devices to prevent pollution by backflow of potable water - Air gap with injector - Family A; Type D (FOREIGN STANDARD)
DIN EN 13079:2003
DIN EN 13081:2009
Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler; German version EN 13081:2008 (Foreign Standard)
DIN EN 13082:2009
Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve; German version EN 13082:2008 (Foreign Standard)
DIN EN 13083:2009
Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading; German version EN 13083:2008 (Foreign Standard)
DIN EN 13087-1:2000
Protective helmets - Test methods - Part 1: Conditions and conditioning; English version of DIN EN 13087-1 (FOREIGN STANDARD)
DIN EN 13087-10:2001
Protective helmets - Test methods - Part 10: Resistance to radiant heat; English version of DIN EN 13087-10 (FOREIGN STANDARD)
DIN EN 13087-2:2000
Protective helmets - Test methods - Part 2: Shock absorption; English version of DIN EN 13087-2 (FOREIGN STANDARD)
DIN EN 13087-3:2000
Protective helmets - Test methods - Part 3: Resistance to penetration; English version of DIN EN 13087-3 (FOREIGN STANDARD)
DIN EN 13087-4:2001
Protective helmets - Test methods - Part 4: Retention system effectiveness; English version of DIN EN 13087-4 (FOREIGN STANDARD)
DIN EN 13087-5:2000
Protective helmets - Test methods - Part 5: Retention system strength; English version of DIN EN 13087-5 (FOREIGN STANDARD)
DIN EN 13087-6:2000
Protective helmets - Test methods - Part 6: Field of vision; English version of DIN EN 13087-6 (FOREIGN STANDARD)
DIN EN 13087-7:2000
Protective helmets - Test methods - Part 7: Flame resistance; English version of DIN EN 13087-7 (FOREIGN STANDARD)
DIN EN 13087-8:2005
Protective helmets - Test methods - Part 8: Electrical properties (FOREIGN STANDARD)
DIN EN 13094:2009
Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction; German version EN 13094:2008+AC:2008 (Foreign Standard)
DIN EN 13123-1:2001
Windows, doors and shutters - Explosion resistance; Requirements and classification - Part 1: Shock tube; English version of DIN EN 13123-1 (FOREIGN STANDARD)
DIN EN 13123-2:2004
Windows, doors, and shutters - Explosion resistance - Requirements and classification - Part 2: Range test (FOREIGN STANDARD)
DIN EN 13124-1:2001
Windows, doors and shutters - Explosion resistance; Test method - Part 1: Shock tube; English version of DIN EN 13124-1 (FOREIGN STANDARD)
DIN EN 13124-2:2004
Windows, doors and shutters - Explosion resistance - Test method - Part 2: Range test (FOREIGN STANDARD)
Characterization of waste - Determination of total organic carbon (TOC) in waste, sludges and sediments; English version of DIN EN 13137 (FOREIGN STANDARD)
DIN EN 13137:2001
Buoyant aids for swimming instruction - Part 1: Safety requirements and test methods for buoyant aids to be worn; German version EN 13138-1:2008 (Foreign Standard)
DIN EN 13138-1:2009
Buoyant aids for swimming instruction - Part 2: Safety requirements and test methods for buoyant aids to be held; German version EN 13138-2:2007 (FOREIGN STANDARD)
DIN EN 13138-2:2008
Buoyant aids for swimming instruction - Part 3: Safety requirements and test methods for swim seats to be worn; German version EN 13138-3:2007 (FOREIGN STANDARD)
DIN EN 13138-3:2008
DIN EN 13158:2000
Protective jackets, body and shoulder protectors for horse riders - Requirements and test methods; English version of DIN EN 13158 (FOREIGN STANDARD)
DIN EN 1317-2:2006
Road restraint systems - Part 2: Performance classes, impact test acceptance criteria and test methods for safety barriers; German version EN 1317-2:1998 + A1:2006 (FOREIGN STANDARD)
DIN EN 1317-3:2000
Road restraint systems - Part 3: Performance classes, impact test acceptance criteria and test methods for crash cushions; English version of DIN EN 1317-3 (FOREIGN STANDARD)
DIN EN 1317-5:2008
Road restraint systems - Part 5: Product requirements and evaluation of conformity for vehicle restraint systems; German version EN 1317-5:2007+A1:2008 (Foreign Standard)
DIN EN 13178:2000
Personal eye protection - Eye protectors for snowmobile users; English version of DIN EN 13178 (FOREIGN STANDARD)
DIN EN 13205:2002
Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations (FOREIGN STANDARD)
Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury; English version of DIN EN 13211 (FOREIGN STANDARD)
DIN EN 13211:2001
Air quality - Stationary source emissions - Manual methode of determination of the concentration of total mercury; Corrigenda to DIN EN 13211:2001-06 (FOREIGN STANDARD)
DIN EN 13211 Berichtigung 1:2005
DIN EN 13238:2001
Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates; English version of DIN EN 13238 (FOREIGN STANDARD)
DIN EN 13274-1:2001
Respiratory protective devices - Methods of test - Part 1: Determination of inward leakage and total inward leakage; English version of DIN EN 13274-1 (FOREIGN STANDARD)
DIN EN 13274-2:2001
Respiratory protective devices - Methods of test - Part 2: Practical performance tests; English version of DIN EN 13274-2 (FOREIGN STANDARD)
DIN EN 13274-3:2002
Respiratory protective devices - Methods of test - Part 3: Determination of breathing resistance; English version of DIN EN 13274-3 (FOREIGN STANDARD)
DIN EN 13274-4:2001
Respiratory protective devices - Methods of test - Part 4: Flame test; English version of DIN EN 13274-4 (FOREIGN STANDARD)
DIN EN 13274-5:2001
Respiratory protective devices - Methods of test - Part 5: Climatic conditions; English version of DIN EN 13274-5 (FOREIGN STANDARD)
DIN EN 13274-6:2002
Respiratory protective devices - Methods of test - Part 6: Determination of carbon dioxide content of the inhalation air; English version of DIN EN 13274-6 (FOREIGN STANDARD)
DIN EN 13274-8:2003
Respiratory protective devices - Methods of test - Part 8: Determination of dolomite dust clogging (FOREIGN STANDARD)
DIN EN 13277-1:2001
Protective equipment for martial arts - Part 1: General requirements and test methods; English version of DIN EN 13277-1 (FOREIGN STANDARD)
DIN EN 13277-2:2001
Protective equipment for martial arts - Part 2: Additional requirements and test methods for instep protectors, shin protectors and forearm protectors; English version of DIN EN 13277-2 (FOREIGN STANDARD)
DIN EN 13277-3:2007
Protective equipment for martial arts - Part 3: Additional requirements and test methods for trunk protectors; German version EN 13277-3:2000+A1:2007 (FOREIGN STANDARD)
DIN EN 13277-4:2007
Protective equipment for martial arts - Part 4: Additional requirements and test methods for head protectors; German version EN 13277-4:2001+A1:2007 (FOREIGN STANDARD)
DIN EN 13277-5:2002
Protective equipment for martial arts - Part 5: Additional requirements and test methods for genital protectors and abdominal protectors; English version of DIN EN 13277-5 (FOREIGN STANDARD)
DIN EN 13277-6:2003
Protective equipment for martial arts - Part 6: Additional requirements and test methods for breast protectors for females (FOREIGN STANDARD)
DIN EN 13284-1:2002
Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method (FOREIGN STANDARD)
DIN EN 13284-2:2004
Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems (FOREIGN STANDARD)
DIN EN 133:2002
Respiratory protective devices - Classification; English version of DIN EN 133 (FOREIGN STANDARD)
DIN EN 13308:2003
Tanks for transport of dangerous goods - Service equipment for tanks - Non-pressure balanced footvalve (FOREIGN STANDARD)
DIN EN 13314:2003
Tanks for transport of dangerous goods - Service equipment for tanks - Fill hole cover (FOREIGN STANDARD)
DIN EN 13315:2002
Tanks for transport of dangerous goods - Service equipment for tanks - Gravity discharge coupler (FOREIGN STANDARD)
DIN EN 13316:2003
Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve (FOREIGN STANDARD)
DIN EN 13317:2007
Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly; German version EN 13317:2002+A1:2006 (FOREIGN STANDARD)
Characterization of sludges - Determination of Kjeldahl nitrogen; English version of DIN EN 13342 (FOREIGN STANDARD)
DIN EN 13342:2001
Characterization of sludges - Determination of trace elements and phosphorus - Aqua regia extraction methods; English version of DIN EN 13346 (FOREIGN STANDARD)
DIN EN 13346:2001
DIN EN 13356:2001
Visibility accessories for non-professional use - Test methods and requirements; English version of DIN EN 13356 (FOREIGN STANDARD)
Characterization of waste - Analysis of eluates - Determination of Ammonium, AOX, conductivity, Hg, phenol index, TOC, CN<(hoch)-> easily liberatable, F<(hoch)-> (FOREIGN STANDARD)
DIN EN 13370:2003
DIN EN 13374:2004
Temporary edge protection systems - Product specification, test methods (FOREIGN STANDARD)
DIN EN 13432:2000
Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging; English version of DIN EN 13432 (FOREIGN STANDARD)
DIN EN 13432 Berichtigung 2:2007
Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging; German version EN 13432:2000, Corrigenda to DIN EN 1 (TITLE TRUNCATED) (FOREIGN STANDARD)
Devices to prevent pollution by backflow of potable water - Mechanical disconnector, direct actuated - Family G, type A; German version EN 13433:2006 (FOREIGN STANDARD)
DIN EN 13433:2006
Devices to prevent pollution by backflow of potable water - Mechanical disconnector, hydraulic actuated - Family G, type B; German version EN 13434:2006 (FOREIGN STANDARD)
DIN EN 13434:2006
DIN EN 13437:2004
Packaging and material recycling - Criteria for recycling methods - Description of recycling processes and flow chart (FOREIGN STANDARD)
DIN EN 13439:2004
Packaging - Rate of energy recovery - Definition and method of calculation (FOREIGN STANDARD)
DIN EN 13440:2004
Packaging - Rate of recycling - Definition and method of calculation (FOREIGN STANDARD)
DIN EN 13443-1:2007
Water conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80 ?m to 150 ?m - Requirements for performances, safety and testing; German version EN 13443-1:2002+A1:2007 (FOREIGN STANDARD)
DIN EN 13443-2:2007
Water conditioning equipment inside buildings - Mechanical filters - Part 2: Particle rating 1 ?m to less than 80 ?m - Requirements for performance, safety and testing; German version EN 13443-2:2005+A1:2007 (FOREIGN STANDARD)
DIN EN 13444-1:2003
Electrically propelled road vehicles - Measurement of emissions of hybrid vehicles - Part 1: Thermic electrical hybrid vehicles (FOREIGN STANDARD)
DIN EN 13463-1:2002
Non-electrical equipment for potentially explosive atmospheres - Part 1: Basic method and requirements (FOREIGN STANDARD)
DIN EN 13463-2:2005
Non-electrical equipment for use in potentially explosive atmospheres - Part 2: Protection by flow restricting enclosure 'fr' (FOREIGN STANDARD)
DIN EN 13463-3:2005
Non-electrical equipment for use in potentially explosive atmospheres - Part 3: Protection by flameproof enclosure "d" (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 13463-5:2004
Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety "c" (FOREIGN STANDARD)
DIN EN 13463-6:2005
Non-electrical equipment for use in potentially explosive atmospheres - Part 6: Protection by control of ignition source "b" (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 13463-8:2004
Non-electrical equipment for potentially explosive atmospheres - Part 8: Protection by liquid immersion 'k' (FOREIGN STANDARD)
DIN EN 13478:2008
Safety of machinery - Fire prevention and protection; German version EN 13478:2001+A1:2008 (Foreign Standard)
DIN EN 13484:2002
Helmets for users of luges (FOREIGN STANDARD)
DIN EN 13490:2009
Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration; German version EN 13490:2001+A1:2008 (Foreign Standard)
DIN EN 13501-1:2007
Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests; German version EN 13501-1:2007 (FOREIGN STANDARD)
DIN EN 13501-2:2008
Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services; German version EN 13501-2:2007 (FOREIGN STANDARD)
DIN EN 13501-3:2006
Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers (FOREIGN STANDARD)
DIN EN 13501-4:2007
Fire classification of construction products and building elements - Part 4: Classification using data from fire resistance tests on components of smoke control systems; German version EN 13501-4:2007 (FOREIGN STANDARD)
DIN EN 13501-5:2006
Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests (FOREIGN STANDARD)
DIN EN 13501-5 Berichtigung 2:2009
Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests; German version EN 13501-5:2005, Corrigendum to DIN EN 13501-5:2006-03; German version EN 13501-5:2005/AC:200
DIN EN 13526:2002
Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon in flue gases from solvent using processes - Continuous flame ionisation detector method; English version of DIN EN 13526 (FOREIGN STANDARD)
Ambient air quality - Diffuse samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 1: General requirements (FOREIGN STANDARD)
DIN EN 13528-1:2002
Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 2: Specific requirements and test methods (FOREIGN STANDARD)
DIN EN 13528-2:2002
Ambient air quality - Diffuse samplers for the determination of concentrations of gases and vapours - Part 3: Guide to selection, use and maintenance (FOREIGN STANDARD)
DIN EN 13528-3:2004
DIN EN 13541:2001
Glass in building - Security glazing - Testing and classification of resistance against explosion pressure; English version of DIN EN 13541 (FOREIGN STANDARD)
DIN EN 13546:2007
Protective clothing - Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players - Requirements and test methods; German version EN 13546:2002+A1:2007 (FOREIGN STANDARD)
DIN EN 13565-1:2008
Fixed firefighting systems - Foam systems - Part 1: Requirements and test methods for components; German version EN 13565-1:2003+A1:2007 (FOREIGN STANDARD)
DIN EN 13567:2007
Protective clothing - Hand, arm, chest, abdomen, leg, genital and face protectors for fencers - Requirements and test methods; German version EN 13567:2002+A1:2007 (FOREIGN STANDARD)
Chemical attack on concrete - Determination of aggressive carbon dioxide content in water; German version EN 13577:2007 (FOREIGN STANDARD)
DIN EN 13577:2007
DIN EN 13593:2003
Packaging - Paper sacks for household waste collection - Types, requirements and test methods (FOREIGN STANDARD)
DIN EN 13594:2002
Protective gloves for professional motorcycle riders - Requirements and test methods (FOREIGN STANDARD)
DIN EN 13595-1:2002
Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 1: General requirements (FOREIGN STANDARD)
DIN EN 13595-2:2002
Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 2: Test method for determination of impact abrasion resistance (FOREIGN STANDARD)
DIN EN 13595-3:2002
Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 3: Test method for determination of burst strength (FOREIGN STANDARD)
DIN EN 13595-4:2002
Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 4: Test method for determination of impact cut resistance (FOREIGN STANDARD)
DIN EN 136:1998
Respiratory protective devices - Full-face masks - Requirements, testing and marking (FOREIGN STANDARD)
DIN EN 1363-1:1999
Fire resistance tests - Part 1: General requirements (FOREIGN STANDARD)
DIN EN 1363-2:1999
Fire resistance tests - Part 2: Alternative and additional procedures (FOREIGN STANDARD)
DIN EN 13634:2002
Protective footwear for professional motorcycle riders - Requirements and test methods (FOREIGN STANDARD)
DIN EN 1364-1:1999
Fire resistance tests for non-loadbearing elements - Part 1: Walls (FOREIGN STANDARD)
DIN EN 1364-2:1999
Fire resistance tests for non-loadbearing elements - Part 2: Ceilings (FOREIGN STANDARD)
DIN EN 1364-3:2006
Fire resistance tests for non-loadbearing elements - Part 3: Curtain walling - Full configuration (complete assembly); German version EN 1364-3:2006 (FOREIGN STANDARD)
DIN EN 1364-4:2007
Fire resistance tests for non-loadbearing elements - Part 4: Curtain walling - Part configuration; German version EN 1364-4:2007 (FOREIGN STANDARD)
Cryogenic vessels - Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices for cryogenic service (FOREIGN STANDARD)
DIN EN 13648-2:2002
DIN EN 13649:2002
Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Activated carbon and solvent desorption method; English version of DIN EN 13649 (FOREIGN STANDARD)
DIN EN 1365-1:1999
Fire resistance tests for loadbearing elements - Part 1: Walls (FOREIGN STANDARD)
DIN EN 1365-2:2000
Fire resistance tests for leadbearing elementess - Part 2: Floors and roofs; English version of DIN EN 1365-2 (FOREIGN STANDARD)
DIN EN 1365-3:2000
Fire resistance tests for loadbearing elements - Part 3: Beams; English version of DIN EN 1365-3 (FOREIGN STANDARD)
DIN EN 1365-4:1999
Fire resistance tests for loadbearing elements - Part 4: Columns (FOREIGN STANDARD)
DIN EN 1365-5:2005
Fire resistance tests for loadbearing elements - Part 5: Balconies and walkways (FOREIGN STANDARD)
DIN EN 1365-6:2005
Fire resistance tests for loadbearing elements - Part 6: Stairs (FOREIGN STANDARD)
DIN EN 1366-1:1999
Fire resistance tests for service installations - Part 1: Ducts (FOREIGN STANDARD)
DIN EN 1366-2:1999
Fire resistance tests for service installations - Part 2: Fire dampers (FOREIGN STANDARD)
DIN EN 1366-4:2006
Fire resistance tests for service installations - Part 4: Linear joint seals; German version EN 1366-4:2006 (FOREIGN STANDARD)
DIN EN 1366-5:2003
Fire resistance tests for service installations - Part 5: Service ducts and shafts (FOREIGN STANDARD)
DIN EN 1366-6:2005
Fire resistance tests for service installations - Part 6: Raised access and hollow core floors (FOREIGN STANDARD)
DIN EN 1366-7:2004
Fire resistance tests for service installations - Part 7: Conveyor systems and their closures (FOREIGN STANDARD)
DIN EN 1366-8:2004
Fire resistance tests for service installations - Part 8: Smoke extraction ducts (FOREIGN STANDARD)
DIN EN 1366-9:2008
Fire resistance tests for service installations - Part 9: Single compartment smoke extraction ducts; German version EN 1366-9:2008 (FOREIGN STANDARD)
Determination of the maximum explosion pressure and the maximum pressure rise of gases and vapours - Part 1: Determination of the maximum explosion pressure (FOREIGN STANDARD)
DIN EN 13673-1:2003
DIN EN 137:2007
Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with full face mask - Requirements, testing, marking; German version EN 137:2006 (FOREIGN STANDARD)
Air quality - Determination of odour concentration by dynamic olfactometry (FOREIGN STANDARD)
DIN EN 13725:2003
Air quality - Determination of odour concentration by dynamic olfactometry; German version EN 13725:2003, Corrigenda to DIN EN 13725:2003-07; German version EN 13725:2003/AC:2006 (FOREIGN STANDARD)
DIN EN 13725 Berichtigung 1:2006
DIN EN 13772:2003
Textiles and textile products - Burning behaviour of curtains and drapes - Measurement of flame spread of vertically oriented specimens with large ignition source (FOREIGN STANDARD)
DIN EN 13773:2003
Textiles and textile products - Burning behaviour of curtains and drapes - Classification scheme (FOREIGN STANDARD)
DIN EN 13781:2002
Protective helmets for drivers and passengers of snowmobiles and bobsleighs (FOREIGN STANDARD)
DIN EN 13794:2003
Respiratory protective devices - Self-contained closed-circuit breathing apparatus for escape - Requirements, testing, marking (FOREIGN STANDARD)
DIN EN 138:1994
Respiratory protective devices - Fresh air hose breathing apparatus for use with full mask, half mask or mouthpiece assembly - Requirements, testing and marking (FOREIGN STANDARD)
DIN EN 13819-1:2003
Hearing protectors - Testing - Part 1: Physical test methods (FOREIGN STANDARD)
DIN EN 13819-2:2003
Hearing protectors - Testing - Part 2: Acoustic test methods (FOREIGN STANDARD)
DIN EN 13821:2003
Potentially explosive atmospheres - Explosion prevention and protection - Determination of minimum ignition energy of dust/air mixtures (FOREIGN STANDARD)
DIN EN 13823:2002
Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item (FOREIGN STANDARD)
DIN EN 13832-1:2006
Footwear protecting against chemicals - Part 1: Terminology and test methods; German version EN 13832-1:2006 (FOREIGN STANDARD)
DIN EN 13832-2:2006
Footwear protecting against chemicals - Part 2: Requirements for footwear resistant to chemicals under laboratory conditions; German version EN 13832-2:2006 (FOREIGN STANDARD)
DIN EN 13832-3:2006
Footwear protecting against chemicals - Part 3: Requirements for footwear highly resistant to chemicals under laboratory conditions; German version EN 13832-3:2006 (FOREIGN STANDARD)
DIN EN 1384/A1:2002
Helmets for equestrian activities; Amendment A1; English version of DIN EN 1384:1996/A1:2001 (FOREIGN STANDARD)
DIN EN 1384:1996
Helmets for equestrian activities (FOREIGN STANDARD)
DIN EN 1385:2005
Helmets for canoeing and whitewater sports (includes amendment A1:2005) (FOREIGN STANDARD)
DIN EN 13861:2003
Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery (FOREIGN STANDARD)
DIN EN 13890:2003
Workplace atmospheres - Procedures for measuring metals and metalloids in airborne particles - Requirements and test methods (FOREIGN STANDARD)
DIN EN 13911:2004
Protective clothing for firefighters - Requirements and test methods for fire hoods for firefighters (FOREIGN STANDARD)
Aluminium and aluminium alloys - Scrap - Part 1: General requirements, sampling and tests (FOREIGN STANDARD)
DIN EN 13920-1:2003
Aluminium and aluminium alloys - Scrap - Part 10: Scrap consisting of used aluminium beverage cans (FOREIGN STANDARD)
DIN EN 13920-10:2003
Aluminium and aluminium alloys - Scrap - Part 11: Scrap from aluminium-copper radiators (FOREIGN STANDARD)
DIN EN 13920-11:2003
Aluminium and aluminium alloys - Scrap - Part 12: Turnings consisting of one single alloy (FOREIGN STANDARD)
DIN EN 13920-12:2003
Aluminium and aluminium alloys - Scrap - Part 13: Mixed turnings consisting of two or more alloys (FOREIGN STANDARD)
DIN EN 13920-13:2003
Aluminium and aluminium alloys - Scrap - Part 14: Scrap from post-consumer aluminium packagings (FOREIGN STANDARD)
DIN EN 13920-14:2003
Aluminium and aluminium alloys - Scrap - Part 15: Decoated aluminium scrap from post-consumer aluminium packagings (FOREIGN STANDARD)
DIN EN 13920-15:2003
Aluminium and aluminium alloys - Scrap - Part 16: Scrap consisting of skimmings, drosses, spills and metallics (FOREIGN STANDARD)
DIN EN 13920-16:2003
Aluminium and aluminium alloys - Scrap - Part 2: Unalloyed aluminium scrap (FOREIGN STANDARD)
DIN EN 13920-2:2003
Aluminium and aluminium alloys - Scrap - Part 3: Wire and cable scrap (FOREIGN STANDARD)
DIN EN 13920-3:2003
Aluminium and aluminium alloys - Scrap - Part 4: Scrap consisting of one single wrought alloy (FOREIGN STANDARD)
DIN EN 13920-4:2003
Aluminium and aluminium alloys - Scrap - Part 5: Scrap consisting of two or more wrought alloys of the same series (FOREIGN STANDARD)
DIN EN 13920-5:2003
Aluminium and aluminium alloys - Scrap - Part 7: Scrap consisting of castings (FOREIGN STANDARD)
DIN EN 13920-7:2003
Aluminium and aluminium alloys - Scrap - Part 8: Scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes (FOREIGN STANDARD)
DIN EN 13920-8:2003
Aluminium and aluminium alloys - Scrap - Part 9: Scrap from aluminium separation processes of non-ferrous shredded materials (FOREIGN STANDARD)
DIN EN 13920-9:2003
DIN EN 13921:2007
Personal protective equipment - Ergonomic principles; German version EN 13921:2007 (FOREIGN STANDARD)
DIN EN 13922:2003
Tanks for transport of dangerous goods - Service equipment for tanks - Overfill prevention systems for liquid fuels (FOREIGN STANDARD)
DIN EN 13946:2003
Water quality - Guidance standard for the routine sampling and pretreatment of benthic diatoms from rivers (FOREIGN STANDARD)
DIN EN 13949:2003
Respiratory equipment - Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen - Requirements, testing, marking (FOREIGN STANDARD)
DIN EN 1399:1998
Resilient floor coverings - Determination of resistance to stubbed and burning cigarettes (FOREIGN STANDARD)
DIN EN 140:1998
Respiratory protective devices - Half masks and quarter masks - Requirements, testing, marking (FOREIGN STANDARD)
DIN EN 14011:2003
Water quality - Sampling of fish with electricity (FOREIGN STANDARD)
DIN EN 14021:2004
Stone shields for off-road motorcycling suited to protect riders against stones and debris - Requirements and test methods (FOREIGN STANDARD)
DIN EN 14025:2008
Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and Construction; German version EN 14025:2008 (FOREIGN STANDARD)
DIN EN 14031:2003
Workplace atmospheres - Determination of airborne endotoxins (FOREIGN STANDARD)
Determination of explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure p<(Index)max> of dust clouds (FOREIGN STANDARD)
DIN EN 14034-1:2004
Determination of explosion characteristics of dust clouds - Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt)<(Index)max> of dust clouds; German version EN 14034-2:2006 (FOREIGN STANDARD)
DIN EN 14034-2:2006
Determination of explosion characteristics of dust clouds - Part 3: Determination of the lower explosion limit LEL of dust clouds; German version EN 14034-3:2006 (FOREIGN STANDARD)
DIN EN 14034-3:2006
Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds (FOREIGN STANDARD)
DIN EN 14034-4:2004
Characterization of waste - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography; (FOREIGN STANDARD)
DIN EN 14039:2005
DIN EN 14042:2003
Workplace atmospheres - Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents (FOREIGN STANDARD)
DIN EN 14043:2006
High rise aerial appliances for fire service use - Turntable ladders with combined movements - Safety and performance requirements and test methods (FOREIGN STANDARD)
DIN EN 14043 Berichtigung 1:2007
High rise aerial appliances for fire service use - Turntable ladders with combined movements - Safety and performance requirements and test methods; German version EN 14043:2005, Corrigenda to DIN EN 14043:2006-01; Ger (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 14044:2006
High rise aerial appliances for fire service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods (FOREIGN STANDARD)
DIN EN 14044 Berichtigung 1:2007
High rise aerial appliances for fire service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods; German version EN 14044:2005, Corrigenda to DIN EN 14044:2006-01; G (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 14045:2003
Packaging - Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions (FOREIGN STANDARD)
DIN EN 14046:2003
Evaluation of the ultimate aerobic biodegradability and disintegration of packaging materials under controlled composting conditions - Method by analysis of released carbon dioxide (FOREIGN STANDARD)
DIN EN 14052:2006
High performance industrial helmets (FOREIGN STANDARD)
DIN EN 14058:2004
Protective clothing - Garments for protection against cool environments (FOREIGN STANDARD)
DIN EN 14095:2004
Water conditioning equipment inside buildings - Electrolytic treatment systems with aluminium anodes - Requirements for performance and safety, testing (FOREIGN STANDARD)
DIN EN 14115:2002
Textiles - Burning behaviour of materials for marquees, large tents and related products - Ease of ignition; English version of DIN EN 14115 (FOREIGN STANDARD)
DIN EN 14116:2009
Tanks for transport of dangerous goods - Digital interface for the product recognition device; German version EN 14116:2007+A1:2008 (Foreign Standard)
DIN EN 14120:2007
Protective clothing - Wrist, palm, knee and elbow protectors for users of roller sports equipment - Requirements and test methods; German version EN 14120:2003+A1:2007 (FOREIGN STANDARD)
DIN EN 14126:2004
Protective clothing - Performance requirements and test methods for protective clothing against infective agents (FOREIGN STANDARD)
Coverings - Determination of fire protection ability (FOREIGN STANDARD)
DIN EN 14135:2004
DIN EN 14143:2003
Respiratory equipment - Self-contained re-breathing diving apparatus (FOREIGN STANDARD)
DIN EN 14181:2004
Stationary source emissions - Quality assurance of automated measuring systems (FOREIGN STANDARD)
DIN EN 14184:2004
Water quality - Guidance standard for the surveying of aquatic macrophytes in running waters (FOREIGN STANDARD)
Cold applied joint sealants - Part 7: Test method for the determination of the resistance to flame (FOREIGN STANDARD)
DIN EN 14187-7:2003
DIN EN 142:2002
Respiratory protective devices - Mouthpiece assemblies - Requirements, testing, marking (FOREIGN STANDARD)
Determination of odour and flavour assessment of water in piping systems - Part 1: Test method (FOREIGN STANDARD)
DIN EN 1420-1:1999
DIN EN 14207:2003
Water quality - Determination of epichlorohydrin (FOREIGN STANDARD)
Ambient air quality - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence (FOREIGN STANDARD)
DIN EN 14211:2005
Ambient air quality - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence (FOREIGN STANDARD)
DIN EN 14212:2005
DIN EN 14243:2004
Post-consumer tyre - Materials and applications; English version prEN 14243:2004 (FOREIGN STANDARD)
DIN EN 14246:2006
Gypsum elements for suspended ceilings - Definitions, requirements and test methods; German version EN 14246:2006 (FOREIGN STANDARD)
DIN EN 14253:2008
Mechanical vibration - Measurement and calculation of occupational exposure to whole-body vibration with reference to health - Practical guidance; German version EN 14253:2003+A1:2007 (FOREIGN STANDARD)
DIN EN 143:2007
Respiratory protective devices - Particle filters - Requirements, testing, marking; German version EN 143:2000 + AC:2005 + A1:2006 (FOREIGN STANDARD)
DIN EN 14325:2004
Protective clothing against chemicals - Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages (FOREIGN STANDARD)
DIN EN 14326:2004
Leather - Physical and mechanical tests - Determination of resistance to horizontal spread of flame (FOREIGN STANDARD)
DIN EN 14328:2005
Protective clothing - Gloves and armguards protecting against cuts by powered knives - Requirements and test methods (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 14339:2005
Underground fire hydrants (FOREIGN STANDARD)
Characterization of waste - Determination of hydrocarbon content by gravimetry (FOREIGN STANDARD)
DIN EN 14345:2004
Characterization of waste - Calculation of dry matter by determination of dry residue or water content; German version EN 14346:2006 (FOREIGN STANDARD)
DIN EN 14346:2007
DIN EN 14360:2004
Protective clothing against rain - Test method for ready made garments - Impact from above with high energy droplets (FOREIGN STANDARD)
DIN EN 14373:2006
Explosion suppression systems (FOREIGN STANDARD)
DIN EN 14383-1:2006
Prevention of crime - Urban planning and building design - Part 1: Definition of specific terms; Trilingual version EN 14383-1:2006 (FOREIGN STANDARD)
DIN EN 14384:2005
Pillar fire hydrants (FOREIGN STANDARD)
DIN EN 14385:2004
Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V (FOREIGN STANDARD)
DIN EN 14387:2008
Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking; German version EN 14387:2004+A1:2008 (FOREIGN STANDARD)
DIN EN 14390:2007
Fire test - Large-scale room reference test for surface products; German version EN 14390:2007 (FOREIGN STANDARD)
DIN EN 14395-1:2005
Influence of organic materials on water intended for human consumption - Organoleptic assessment of water in storage systems - Part 1: Test method (FOREIGN STANDARD)
DIN EN 14404:2005
Personal protective equipment - Knee protectors for work in the kneeling position (FOREIGN STANDARD)
DIN EN 14407:2004
Water quality - Guidance standard for the identification, enumeration and interpretation of benthic diatom samples from running waters (FOREIGN STANDARD)
DIN EN 14412:2004
Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance (FOREIGN STANDARD)
DIN EN 144-2:1999
Respiratory protective devices - Gas cylinder valves - Part 2: Outlet connections (FOREIGN STANDARD)
DIN EN 144-3:2003
Respiratory protective devices - Gas cylinder valves - Part 3: Outlet connections for diving gases Nitrox and oxygen (FOREIGN STANDARD)
DIN EN 14432:2006
Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Product discharge and air inlet valves; German version EN 14432:2006 (FOREIGN STANDARD)
DIN EN 14433:2006
Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Foot valves; German version EN 14433:2006 (FOREIGN STANDARD)
DIN EN 14435:2004
Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only - Requirements, testing, marking (FOREIGN STANDARD)
DIN EN 14450:2005
Secure storage units - Requirements, classification and methods of test for resistance to burglary - Secure safe cabinets (FOREIGN STANDARD)
Devices to prevent pollution by backflow of potable water - In-line anti-vacuum valves DN 8 to DN 80 - Family D, type A (FOREIGN STANDARD)
DIN EN 14451:2005
Devices to prevent pollution by backflow of potable water - Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20 - Family D, type B (FOREIGN STANDARD)
DIN EN 14452:2005
Devices to prevent pollution by backflow of potable water - Pipe interrupter with permanent atmospheric vent DN 10 to DN 20 - Family D, type C (FOREIGN STANDARD)
DIN EN 14453:2005
Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 - Family H; type A (FOREIGN STANDARD)
DIN EN 14454:2005
Devices to prevent pollution by backflow of potable water - Pressurised air inlet valves DN 15 to DN 50 - Family L, type A and type B (FOREIGN STANDARD)
DIN EN 14455:2005
DIN EN 14458:2004
Personal eye-equipment - Faceshields and visors for use with firefighters' and high performance industrial safety helmets used by firefighters, ambulance and emergency services (FOREIGN STANDARD)
DIN EN 14460:2007
Explosion resistant equipment; German version EN 14460:2006 (FOREIGN STANDARD)
DIN EN 14466:2008
Fire-fighting pumps - Portable pumps - Safety and performance requirements, tests; German version EN 14466:2005+A1:2008 (Foreign Standard)
DIN EN 14466 Berichtigung 1:2009
Fire-fighting pumps - Portable pumps - Safety and performance requirements, tests; German version EN 14466:2005+A1:2008, Corrigendum to DIN EN 14466:2008-09 (Foreign Standard)
DIN EN 14470-1:2004
Fire safety storage cabinets - Part 1: Safety storage cabinets for flammable liquids (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 14470-2:2006
Fire safety storage cabinets - Part 2: Safety cabinets for pressurised gas cylinders; German version EN 14470-2:2006 (FOREIGN STANDARD)
DIN EN 14491:2007
Dust explosion venting protective systems; German version EN 14491:2006 (FOREIGN STANDARD)
DIN EN 14491 Berichtigung 1:2009
Dust explosion venting protective systems; German version EN 14491:2006, Corrigendum to DIN EN 14491:2007-08; German version EN 14491:2006/AC:2008 (Foreign Standard)
DIN EN 145:2000
Self-contained closed-circuit breathing apparatus, compressed oxygen or compressed oxygen/nitrogen type - Requirements, testing, marking (includes Amendment A1:2000); English version of DIN EN 145:1997 + A1:2000 (FOREIGN STANDARD)
Devices to prevent pollution by backflow of potable water - Automatic diverter - Family H, type C (FOREIGN STANDARD)
DIN EN 14506:2005
DIN EN 14512:2006
Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Hinged manhole covers and neckrings with pivoting bolts; German version EN 14512:2006 (FOREIGN STANDARD)
DIN EN 14513:2005
Transportable gas cylinders - Bursting disc pressure relief devices (excluding acetylene gas cylinders) (FOREIGN STANDARD)
Determination of the auto ignition temperature of gases and vapours (FOREIGN STANDARD)
DIN EN 14522:2005
DIN EN 14529:2006
Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only (FOREIGN STANDARD)
DIN EN 14530:2004
Workplace atmospheres - Determination of diesel particulate matter - General requirements (FOREIGN STANDARD)
DIN EN 14533:2003
Textiles and textile products - Burning behaviour of bedding items - Classification scheme (FOREIGN STANDARD)
DIN EN 14540:2007
Fire-fighting hoses - Non-percolating layflat hoses for fixed systems; German version EN 14540:2004 + A1:2007 (FOREIGN STANDARD)
DIN EN 14572:2005
High Performance Helmets for Equestrian Activities (FOREIGN STANDARD) (FOREIGN STANDARD)
Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods; German version EN 14582:2007 (FOREIGN STANDARD)
DIN EN 14582:2007
DIN EN 14583:2004
Workplace atmospheres - Volumetric bioaerosol sampling devices - Requirements and test methods (FOREIGN STANDARD)
DIN EN 14591-1:2004
Explosion prevention and protection in underground mines - Protective systems - Part 1: 2-bar-explosion proof ventilation structure (FOREIGN STANDARD)
DIN EN 14591-2:2007
Explosion prevention and protection in underground mines - Protective systems - Part 2: Passive water trough barriers; German version EN 14591-2:2007 (FOREIGN STANDARD)
DIN EN 14591-4:2007
Explosion prevention and protection in underground mines - Protective systems - Part 4: Automatic extinguishing systems for road headers; German version EN 14591-4:2007 (FOREIGN STANDARD)
DIN EN 14593-1:2005
Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Part 1: Apparatus with a full face mask - Requirements, testing, marking (FOREIGN STANDARD)
DIN EN 14593-2:2005
Respiratory protective devices - Compressed air line breathing with demand valve - Part 2: Apparatus with a half mask at positive pressure - Requirements, testing, marking (FOREIGN STANDARD)
DIN EN 14594:2005
Respiratory protective devices - Continuous flow compressed air line breathing apparatus - Requirements, testing, marking (FOREIGN STANDARD)
DIN EN 14595:2005
Tanks for transport of dangerous goods - Service equipment for tanks - Pressure and vacuum breather vent (FOREIGN STANDARD)
DIN EN 14596:2005
Tanks for transport of dangerous goods - Service equipment for tanks - Emergency pressure relief valve (FOREIGN STANDARD)
DIN EN 14604:2009
Smoke alarm devices; German version EN 14604:2005 (Foreign Standard)
DIN EN 14605:2005
Protective clothing against liquid chemicals - Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 14614:2005
Water quality - Guidance standard for assessing the hydromorphological features of rivers (FOREIGN STANDARD)
Devices to prevent pollution by backflow of potable water - Air gap with circular overflow (restricted) - Family A, type F (FOREIGN STANDARD)
DIN EN 14622:2005
Devices to prevent pollution by backflow of potable water - Air gaps with minimum circular overflow (verified by test or measurement) - Family A, type G (FOREIGN STANDARD)
DIN EN 14623:2005
Ambient air quality - Standard method for the measurement of the concentration of ozone by ultraviolet photometry (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 14625:2005
Ambient air quality - Standard method for the measurement of the concentration of carbon monoxide by nondispersive infrared spectroscopy (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 14626:2005
DIN EN 14652:2007
Water conditioning equipment inside buildings - Membrane separation devices - Requirements for performance, safety and testing; German version EN 14652:2005+A1:2007 (FOREIGN STANDARD)
Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography (FOREIGN STANDARD)
DIN EN 14662-1:2005
Ambient air quality - Standard method for measurement of benzene concentrations - Part 2: Pumped sampling followed by solvent desorption and gas chromatography (FOREIGN STANDARD)
DIN EN 14662-2:2005
Ambient air quality - Standard method for measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography (FOREIGN STANDARD)
DIN EN 14662-3:2005
Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography (FOREIGN STANDARD)
DIN EN 14662-4:2005
Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography (FOREIGN STANDARD)
DIN EN 14662-5:2005
Characterization of sludges - Pre-treatment for the determination of extractable ammonia using 2 mol/l potassium chloride; German version EN 14671:2006 (FOREIGN STANDARD)
DIN EN 14671:2006
Characterization of sludges - Determination of total phosphorus (FOREIGN STANDARD)
DIN EN 14672:2005
Characterisation of sludges - Filtration properties - Part 1: Capillary suction time (CST); German version EN 14701-1:2006 (FOREIGN STANDARD)
DIN EN 14701-1:2006
Characterization of sludges - Filtration properties - Part 2: Determination of the specific resistance to filtration; German version EN 14701-2:2006 (FOREIGN STANDARD)
DIN EN 14701-2:2006
Characterization of sludges - Filtration properties - Part 3: Determination of the compressibility; German version EN 14701-3:2006 (FOREIGN STANDARD)
DIN EN 14701-3:2006
Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index); German version EN 14702-1:2006 (FOREIGN STANDARD)
DIN EN 14702-1:2006
Characterisation of sludges - Settling properties - Part 2: Determination of thickenability; German version EN 14702-2:2006 (FOREIGN STANDARD)
DIN EN 14702-2:2006
DIN EN 14710-1:2008
Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1: Classification, general and safety requirements; German version EN 14710-1:2005+A1:2008 (Foreign Standard)
DIN EN 14710-1 Berichtigung 1:2009
Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1: Classification, general and safety requirements; German version EN 14710-1:2005+A1:2008, Corrigendum to DIN EN 14710-1:2008-09 (Foreign Standard)
DIN EN 14710-2:2008
Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 2: Verification of general and safety requirements; German version EN 14710-2:2005+A1:2008 (FOREIGN STANDARD)
DIN EN 14710-2 Berichtigung 1:2009
Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 2: Verification of general and safety requirements; German version EN 14710-2:2005+A1:2008, Corrigendum to DIN EN 14710-2:2008-06 (Foreign Standard)
DIN EN 14717:2005
Welding and allied processes - Environmental check list (FOREIGN STANDARD)
DIN EN 14718:2006
Influence of organic materials on water intended for human consumption - Determination of the chlorine demand - Test method; German version EN 14718:2006 (FOREIGN STANDARD)
Characterization of waste - Preparation of waste samples for ecotoxicity tests (FOREIGN STANDARD)
DIN EN 14735:2005
Characterization of waste - Preparation of waste samples for ecotoxicity tests; German version EN 14735:2005, Corrigenda to DIN EN 14735:2005-11; German version EN 14735:2005/AC:2006 (FOREIGN STANDARD)
DIN EN 14735 Berichtigung 1:2006
DIN EN 14750-1:2006
Railway applications - Air conditioning for urban and suburban rolling stock - Part 1: Comfort parameters; German version EN 14750-1:2006 (FOREIGN STANDARD)
Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours; German version EN 14756:2006 (FOREIGN STANDARD)
DIN EN 14756:2007
DIN EN 14757:2005
Water quality - Sampling of fish with multi-mesh gillnets (FOREIGN STANDARD)
DIN EN 14786:2007
Protective clothing - Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions - Atomizer test; German version EN 14786:2006 (FOREIGN STANDARD)
DIN EN 14789:2006
Stationary source emissions - Determination of volume concentration of oxygen (O<(Index)2>) - Reference method - Paramagnetism (FOREIGN STANDARD)
DIN EN 14790:2006
Stationary source emissions - Determination of the water vapour in ducts (FOREIGN STANDARD)
DIN EN 14791:2006
Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method (FOREIGN STANDARD)
DIN EN 14792:2006
Stationary source emissions - Determination of mass concentration of nitrogen oxides (NO<(Index)x>) - Reference method: Chemiluminescence (FOREIGN STANDARD)
DIN EN 14797:2007
Explosion venting devices; German version EN 14797:2006 (FOREIGN STANDARD)
DIN EN 14803:2006
Identification and/or determination of the quantity of waste; German version EN 14803:2006 (FOREIGN STANDARD)
DIN EN 14806:2005
Packaging - Preliminary evaluation of the disintegration of packaging materials under simulated composting conditions in a laboratory scale test (FOREIGN STANDARD)
DIN EN 148-1:1999
Respiratory protective devices - Threads for facepieces - Part 1: Standard thread connection (FOREIGN STANDARD)
DIN EN 14812:2007
Water conditioning equipment inside buildings - Chemical dosing systems - Pre-set dosing systems - Requirements for performance, safety and testing; German version EN 14812:2005+A1:2007 (FOREIGN STANDARD)
DIN EN 148-2:1999
Respiratory protective devices - Threads for facepieces - Part 2: Centre thread connection (FOREIGN STANDARD)
DIN EN 148-3:1999
Respiratory protective devices - Threads for facepieces - Part 3: Thread connection M 45 x 3 (FOREIGN STANDARD)
DIN EN 1483:2007
Water quality - Determination of mercury - Method using atomic absorption spectrometry; German version EN 1483:2007 (FOREIGN STANDARD)
DIN EN 1484:1997
Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC) in water (FOREIGN STANDARD)
Aerosol containers - Aerosol foam flammability test (FOREIGN STANDARD)
DIN EN 14851:2006
Aerosol containers - Determination of the ignition distance of the spray jet (FOREIGN STANDARD)
DIN EN 14852:2006
Aerosol containers - Enclosed space ignition test (FOREIGN STANDARD)
DIN EN 14853:2006
DIN EN 1486:2008
Protective clothing for fire-fighters - Test methods and requirements for reflective clothing for specialised fire-fighting; German version EN 1486:2007 (FOREIGN STANDARD)
DIN EN 14878:2007
Textiles - Burning behaviour of children's nightwear - Specification; German version EN 14878:2007 (FOREIGN STANDARD)
Air quality - Stationary source emissions - Determination of total mercury: Automated measuring systems (FOREIGN STANDARD)
DIN EN 14884:2006
DIN EN 14897:2007
Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing; German version EN 14897:2006+A1:2007 (FOREIGN STANDARD)
DIN EN 14898:2007
Water conditioning equipment inside buildings - Active media filters - Requirements for performance, safety and testing; German version EN 14898:2006+A1:2007 (FOREIGN STANDARD)
Characterization of waste - Sampling of waste materials - Framework for the preparation and application of a sampling plan (FOREIGN STANDARD)
DIN EN 14899:2006
DIN EN 149:2001
Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking; English version of DIN EN 149:2001 (FOREIGN STANDARD)
Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter (FOREIGN STANDARD)
DIN EN 14902:2005
Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter; German version EN 14902:2005, Corrigenda to DIN EN 14902:2005-10; German version EN 14902:2005/AC:2006 (Foreign Standard)
DIN EN 14902 Berichtigung 1:2007
Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter (FOREIGN STANDARD)
DIN EN 14907:2005
DIN EN 14944-1:2006
Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of factory made cementitious products on organoleptic parameters; German version EN 14944-1:2006 (FOREIGN STANDARD)
DIN EN 14944-3:2009
Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementitious products; German version EN 14944-3:2007 (Foreign Standard)
DIN EN 1496:2007
Personal fall protection equipment - Rescue lifting devices; German version EN 1496:2006 (FOREIGN STANDARD)
DIN EN 14962:2006
Water quality - Guidance on the scope and selection of fish sampling methods; German version EN 14962:2006 (FOREIGN STANDARD)
DIN EN 14968:2006
Semantics for groundwater data interchange; German version EN 14968:2006 (FOREIGN STANDARD)
DIN EN 1497:2007
Personal fall protection equipment - Rescue harnesses; German version EN 1497:2007 (FOREIGN STANDARD)
Conveyor belts for use in underground installations - Electrical and flammability safety requirements; English version EN 14973:2006/prA1:2007 (FOREIGN STANDARD)
DIN EN 14973/A1:2008
Conveyor belts for use in underground installations - Electrical and flammability safety requirements; German version EN 14973:2006 (FOREIGN STANDARD)
DIN EN 14973:2006
DIN EN 1498:2007
Personal fall protection equipment - Rescue loops; German version EN 1498:2006 (FOREIGN STANDARD)
DIN EN 14987:2007
Plastics - Evaluation of disposability in waste water treatment plants - Test scheme for final acceptance and specifications; German version EN 14987:2006 (FOREIGN STANDARD)
DIN EN 14994:2007
Gas explosion venting protective systems; German version EN 14994:2007 (FOREIGN STANDARD)
DIN EN 14995:2007
Plastics - Evaluation of compostability - Test scheme and specifications; German version EN 14995:2006 (FOREIGN STANDARD)
DIN EN 14996:2006
Water quality - Guidance on assuring the quality of biological and ecological assessments in the aquatic environment; German version EN 14996:2006 (FOREIGN STANDARD)
Characterization of waste - Preparation of test portions from the laboratory sample; German version EN 15002:2006 (FOREIGN STANDARD)
DIN EN 15002:2006
DIN EN 15004-1:2008
Fixed firefighting systems - Gas extinguishing systems - Part 1: Design, installation and maintenance (ISO 14520-1:2006, modified); German version EN 15004-1:2008 (Foreign Standard)
DIN EN 15004-10:2008
Fixed firefighting systems - Gas extinguishing systems - Part 10: Physical properties and system design of gas extinguishing systems for IG-541 extinguishant (ISO 14520-15:2005, modified); German version EN 15004-10:2008 (Foreign Standard)
DIN EN 15004-2:2008
Fixed firefighting systems - Gas extinguishing systems - Part 2: Physical properties and system design of gas extinguishing systems for FK-5-1-12 extinguishant (ISO 14520-5:2006, modified); German version EN 15004-2:2008 (Foreign Standard)
DIN EN 15004-3:2008
Fixed firefighting systems - Gas extinguishing systems - Part 3: Physical properties and system design of gas extinguishing systems for HCFC Blend A extinguishant (ISO 14520-6:2006, modified); German version EN 15004-3:2008 (Foreign Standard)
DIN EN 15004-4:2008
Fixed firefighting systems - Gas extinguishing systems - Part 4: Physical properties and system design of gas extinguishing systems for HFC 125 extinguishant (ISO 14520-8:2006, modified); German version EN 15004-4:2008 (Foreign Standard)
DIN EN 15004-5:2008
Fixed firefighting systems - Gas extinguishing systems - Part 5: Physical properties and system design of gas extinguishing systems for HFC 227ea extinguishant (ISO 14520-9:2006, modified); German version EN 15004-5:2008 (Foreign Standard)
DIN EN 15004-6:2008
Fixed firefighting systems - Gas extinguishing systems - Part 6: Physical properties and system design of gas extinguishing systems for HFC 23 extinguishant (ISO 14520-10:2005, modified); German version EN 15004-6:2008 (Foreign Standard)
DIN EN 15004-7:2008
Fixed firefighting systems - Gas extinguishing systems - Part 7: Physical properties and system design of gas extinguishing systems for IG-01 extinguishant (ISO 14520-12:2005, modified); German version EN 15004-7:2008 (Foreign Standard)
DIN EN 15004-8:2008
Fixed firefighting systems - Gas extinguishing systems - Part 8: Physical properties and system design of gas extinguishing systems for IG-100 extinguishant (ISO 14520-13:2005, modified); German version EN 15004-8:2008 (Foreign Standard)
DIN EN 15004-9:2008
Fixed firefighting systems - Gas extinguishing systems - Part 9: Physical properties and system design of gas extinguishing systems for IG-55 extinguishant (ISO 14520-14:2005, modified); German version EN 15004-9:2008 (Foreign Standard)
DIN EN 15051:2006
Workplace atmospheres - Measurement of the dustiness of bulk materials - Requirements and reference test methods; German version EN 15051:2006 (FOREIGN STANDARD)
DIN EN 15058:2006
Stationary source emissions - Determination of the mass concentration of carbon monoxide (CO) - Reference method: Non-dispersive infrared spectrometry; German version EN 15058:2006 (FOREIGN STANDARD)
DIN EN 15090:2006
Footwear for firefighters; German version EN 15090:2006 (FOREIGN STANDARD)
DIN EN 15110:2006
Water quality - Guidance standard for the sampling of zooplankton from standing waters; German version EN 15110:2006 (FOREIGN STANDARD)
Container shells for mobile waste containers with a capacity up to 1700 l - Performance requirements and test methods; German version EN 15132:2006 (FOREIGN STANDARD)
DIN EN 15132:2006
Characterization of waste - Determination of loss on ignition in waste, sludge and sediments; German version EN 15169:2007 (FOREIGN STANDARD)
DIN EN 15169:2007
DIN EN 15182-1:2007
Hand-held branchpipes for fire service use - Part 1: Common requirements; German version EN 15182-1:2007 (FOREIGN STANDARD)
DIN EN 15182-2:2007
Hand-held branchpipes for fire service use - Part 2: Combination branchpipes PN 16; German version EN 15182-2:2007 (FOREIGN STANDARD)
DIN EN 15182-3:2007
Hand-held branchpipes for fire service use - Part 3: Smooth bore jet and/or one fixed spray jet angle branchpipes PN 16; German version EN 15182-3:2007 (FOREIGN STANDARD)
DIN EN 15182-4:2007
Hand-held branchpipes for fire service use - Part 4: High pressure branchpipes PN 40; German version EN 15182-4:2007 (FOREIGN STANDARD)
Characterisation of waste and soil - Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection; German version EN 15192:2006 (FOREIGN STANDARD)
DIN EN 15192:2007
DIN EN 15196:2006
Water quality - Guidance on sampling and processing of the pupal exuviae of Chironomidae (Order Diptera) for ecological assessment; German version EN 15196:2006 (FOREIGN STANDARD)
DIN EN 15204:2006
Water quality - Guidance standard on the enumeration of phytoplankton using inverted microscopy (Uterm”hl technique); German version EN 15204:2006 (FOREIGN STANDARD)
Characterization of waste - Determination of total dissolved solids (TDS) in water and eluates; German version EN 15216:2007 (FOREIGN STANDARD)
DIN EN 15216:2008
DIN EN 15219:2008
Water conditioning equipment inside buildings - Nitrate removal devices - Requirements for performance, safety and testing; German version EN 15219:2006+A1:2007 (FOREIGN STANDARD)
DIN EN 1522:1999
Windows, doors, shutters and blinds - Bullet resistance - Requirements and classification (FOREIGN STANDARD)
DIN EN 1523:1999
Windows, doors, shutters and blinds - Bullet resistance - Test method (FOREIGN STANDARD)
DIN EN 15254-4:2008
Extended application of results from fire resistance tests - Non-loadbearing walls - Part 4: Glazed constructions; German version EN 15254-4:2008 (Foreign Standard)
Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report; German version EN 15259:2007 (FOREIGN STANDARD)
DIN EN 15259:2008
Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources; German version EN 15267-3:2007 (FOREIGN STANDARD)
DIN EN 15267-3:2008
DIN EN 15282:2007
Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges; German version EN 15282:2007 (FOREIGN STANDARD)
Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by using capillary gas chromatography with electron capture or mass spectrometric detection; German version EN 15308:2008 (FOREIGN STANDARD)
DIN EN 15308:2008
Characterization of waste and soil - Determination of elemental composition by X-ray fluorescence; German version EN 15309:2007 (FOREIGN STANDARD)
DIN EN 15309:2007
DIN EN 15342:2008
Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates; German version EN 15342:2007 (FOREIGN STANDARD)
DIN EN 15343:2008
Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content; German version EN 15343:2007 (FOREIGN STANDARD)
DIN EN 15344:2008
Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates; German version EN 15344:2007 (FOREIGN STANDARD)
DIN EN 15345:2008
Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates; German version EN 15345:2007 (FOREIGN STANDARD)
DIN EN 15346:2008
Plastics - Recycled Plastics - Characterisation of poly(vinyl chloride) (PVC) recyclates; German version EN 15346:2007 (FOREIGN STANDARD)
DIN EN 15347:2008
Plastics - Recycled Plastics - Characterisation of plastics wastes; German version EN 15347:2007 (FOREIGN STANDARD)
DIN EN 15348:2008
Plastics - Recycled Plastics - Characterisation of poly(ethylene terephthalate) (PET) recyclates; German version EN 15348:2007 (FOREIGN STANDARD)
DIN EN 15423:2008
Ventilation for buildings - Fire precautions for air distribution systems in buildings; German version EN 15423:2008 (Foreign Standard)
DIN EN 15460:2008
Water quality - Guidance standard for the surveying of macrophytes in lakes; German version EN 15460:2007 (FOREIGN STANDARD)
Ambient air quality - Atmospheric measurements near ground with FTIR spectroscopy; German version EN 15483:2008 (Foreign Standard)
DIN EN 15483:2009
DIN EN 15507:2009
Packaging - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades; German version EN 15507:2008 (Foreign Standard)
Characterization of waste - Determination of polycyclic aromatic hydrocarbons (PAH) in waste using gas chromatography mass spectrometry (GC/MS); German version EN 15527:2008 (Foreign Standard)
DIN EN 15527:2008
Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air; German version EN 15549:2008 (FOREIGN STANDARD)
DIN EN 15549:2008
DIN EN 15613:2009
Knee and elbow protectors for indoor sports - Safety requirements and test methods; German version EN 15613:2008 (Foreign Standard)
DIN EN 15614:2007
Protective clothing for firefighters - Laboratory test methods and perfomance requirements for wildland clothing; German version EN 15614:2007 (FOREIGN STANDARD)
DIN EN 1568-1:2008
Fire extinguishing media - Foam concentrates - Part 1: Specification for medium expansion foam concentrates for surface application to water-immiscible liquids; German version EN 1568-1:2008 (FOREIGN STANDARD)
DIN EN 1568-2:2008
Fire extinguishing media - Foam concentrates - Part 2: Specification for high expansion foam concentrates for surface application to water-immiscible liquids; German version EN 1568-2:2008 (FOREIGN STANDARD)
DIN EN 1568-3:2008
Fire extinguishing media - Foam concentrates - Part 3: Specification for low expansion foam concentrates for surface application to water-immiscible liquids; German version EN 1568-3:2008 (FOREIGN STANDARD)
DIN EN 1568-4:2008
Fire extinguishing media - Foam concentrates - Part 4: Specification for low expansion foam concentrates for surface application to water-miscible liquids; German version EN 1568-4:2008 (FOREIGN STANDARD)
DIN EN 1598:2002
Health and safety in welding and allied processes - Transparent welding curtains, strips and screens for arc welding processes (includes Amendment A1:2001); English version of DIN EN 1598:1997 + A1:2001 (FOREIGN STANDARD)
DIN EN 1621-1:1998
Motorcyclists' protective clothing against mechanical impact - Part 1: Requirements and test methods for impact protectors (FOREIGN STANDARD)
DIN EN 1621-2:2003
Motorcyclists' protective clothing against mechanical impact - Part 2: Motorcyclists' back protectors; Requirements and test methods (FOREIGN STANDARD)
DIN EN 1622:2006
Water quality - Determination of the threshold odour number (TON) and threshold flavour number (TFN); German version EN 1622:2006 (FOREIGN STANDARD)
Burning behaviour of industrial and technical textiles - Procedure to determine the flame spread of vertically oriented specimens (FOREIGN STANDARD)
DIN EN 1624:1999
Burning behaviour of industrial and technical textiles - Procedure to determine the ignitability of vertically oriented specimens (FOREIGN STANDARD)
DIN EN 1625:1999
DIN EN 1634-1:2009
Fire resistance and smoke control tests for door, shutter and openable window assemblies and elements of building hardware - Part 1: Fire resistance tests for doors, shutters and openable windows; German version EN 1634-1:2008 (Foreign Standard)
DIN EN 1634-2:2009
Fire resistance and smoke control tests for door, shutter and openable window assemblies and elements of building hardware - Part 2: Fire resistance characterisation test for elements of building hardware; German version EN 1634-2:2008 (Foreign Standard)
DIN EN 166:2002
Personal eye protection - Specifications; English version of DIN EN 166 (FOREIGN STANDARD)
DIN EN 167:2002
Personal eye protection - Optical test methods; English version of DIN EN 167 (FOREIGN STANDARD)
DIN EN 168:2002
Personal eye protection - Non-optical test methods; English version of DIN EN 168 (FOREIGN STANDARD)
DIN EN 169:2003
Personal eye protection - Filters for welding and related techniques - Transmittance requirements and recommended use (FOREIGN STANDARD)
DIN EN 170:2003
Personal eye protection - Ultraviolet filters - Transmittance requirements and recommended use (FOREIGN STANDARD)
DIN EN 171:2002
Personal eye protection - Infrared filters - Transmittance requirements and recommended use (FOREIGN STANDARD)
DIN EN 1717:2001
Protection against pollution of potable water installations and general requirements of devices to prevent pollution by backflow - (DVGW Code of practice); English version of DIN EN 1717 (FOREIGN STANDARD)
DIN EN 1731:2007
Personal eye protection - Mesh eye and face protectors; German version EN 1731:2006 (FOREIGN STANDARD)
DIN EN 174:2001
Personal eye-protection - Ski goggles for downhill skiing; English version of DIN EN 174 (FOREIGN STANDARD)
DIN EN 1746:1998
Safety of machinery - Guidance for the drafting of the noise clauses of safety standards (FOREIGN STANDARD)
DIN EN 175:1997
Personal protection - Equipment for eye and face protection during welding and allied processes (FOREIGN STANDARD)
DIN EN 1760-1:1997
Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for the design and testing of pressure-sensitive mats and pressure-sensitive floors (FOREIGN STANDARD)
DIN EN 1760-2:2001
Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars; English version of DIN EN 1760-2 (FOREIGN STANDARD)
DIN EN 1760-3:2004
Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices (FOREIGN STANDARD)
DIN EN 1760-3 Berichtigung 1:2006
Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices; German version EN 1760-3:2004, Corrigenda to DIN EN 1760-3:2004-10; Germa
DIN EN 1777:2005
Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing (FOREIGN STANDARD)
DIN EN 1825-1:2004
Grease separators - Part 1: Principles of design, performance and testing, marking and quality control (FOREIGN STANDARD)
DIN EN 1825-2:2002
Grease separators - Part 2: Selection of nominal size, installation, operation and maintenance; English version of DIN EN 1825-2 (FOREIGN STANDARD)
DIN EN 1827:1999
Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking (FOREIGN STANDARD)
DIN EN 1834-1:2000
Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmosph (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 1834-2:2000
Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptible (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 1834-3:2000
Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres; Engl (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 1837:1999
Safety of machinery - Integral lighting of machines (FOREIGN STANDARD)
Determination of explosion limits of gases and vapours (FOREIGN STANDARD)
DIN EN 1839:2004
DIN EN 1846-2/A1:2005
Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance (FOREIGN STANDARD)
DIN EN 1846-2/A2:2006
Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance; German version EN 1846-2:2001/A2:2006 (FOREIGN STANDARD)
DIN EN 1846-2:2002
Firefighting and rescue service vehicles - Part 2: Common requirements; Safety and performance; English version of DIN EN 1846-2 (FOREIGN STANDARD)
DIN EN 1846-3:2008
Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performance; German version EN 1846-3:2002+A1:2008 (Foreign Standard)
DIN EN 1866:2006
Mobile fire extinguishers (FOREIGN STANDARD)
DIN EN 1866-1:2007
Mobile fire extinguishers - Part 1: Characteristics, performance and test methods; German version EN 1866-1:2007 (FOREIGN STANDARD)
DIN EN 1869:2001
Fire blankets; English version of DIN EN 1869 (FOREIGN STANDARD)
DIN EN 1891:1998
Personal protective equipment for prevention of falls from a height - Low stretch kernmantel ropes (FOREIGN STANDARD)
DIN EN 1899-1:1998
Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 1: Dilution and seeding method with allylthiourea acid addition (ISO 5815:1989, modified) (FOREIGN STANDARD)
DIN EN 1899-2:1998
Water quality - Determination of biochemical oxygen demand after n days (BOD<(Index)n>) - Part 2: Method for undiluted samples (ISO 5815:1989, modified) (FOREIGN STANDARD)
DIN EN 1911-1:1998
Stationary source emissions - Manual method of determination of HCl - Part 1: Sampling of gases (FOREIGN STANDARD)
DIN EN 1911-2:1998
Stationary source emissions - Manual method of determination of HCl - Part 2: Gaseous compounds absorption (FOREIGN STANDARD)
DIN EN 1911-3:1998
Stationary source emissions - Manual method of determination of HCl - Part 3: Absorption solutions analysis and calculation (FOREIGN STANDARD)
DIN EN 1938:1998
Personal eye protection - Goggles for motorcycle and moped users (FOREIGN STANDARD)
DIN EN 1947:2007
Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles; German version EN 1947:2002 + A1:2007 (FOREIGN STANDARD)
DIN EN 1948-1:2006
Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs; German version EN 1948-1:2006 (FOREIGN STANDARD)
DIN EN 1948-2:2006
Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 2: Extraction and clean-up of PCDDs/PCDFs (FOREIGN STANDARD)
DIN EN 1948-3:2006
Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 3: Identification and quantification of PCDDs/PCDFs; German version EN 1948-3:2006 (FOREIGN STANDARD)
DIN EN 1987-3:2000
Electrically propelled road vehicles - Specific requirements for safety - Part 3: Protection of users against electrical hazards; English version of DIN EN 1987-3 (FOREIGN STANDARD)
DIN EN 1991-1-2:2003
Eurocode 1 - Actions on structures - Part 1-2: General actions; Actions on structures exposed to fire (FOREIGN STANDARD)
DIN EN 1992-1-2:2006
Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design; German version EN 1992-1-2:2004 (FOREIGN STANDARD)
DIN EN 1992-1-2 Berichtigung 1:2009
Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design; German version EN 1992-1-2:2004, Corrigendum to DIN EN 1992-1-2:2006-10; German version EN 1992-1-2:2004/AC:2008 (Foreign Standard)
DIN EN 1993-1-2:2006
Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design; German version EN 1993-1-2:2005 + AC:2005 (FOREIGN STANDARD)
DIN EN 1994-1-2:2006
Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design; German version EN 1994-1-2:2005 (FOREIGN STANDARD)
DIN EN 1994-1-2 Berichtigung 1:2008
Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design; German version EN 1994-1-2:2005, Corrigendum to DIN EN 1994-1-2:2006-11; German version EN 1994-1-2:2005/AC:2008 (Foreign Standard)
DIN EN 1995-1-2:2006
Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design; German version EN 1995-1-2:2004 + AC:2006 (FOREIGN STANDARD)
DIN EN 1996-1-2:2006
Eurocode 6: Design of masonry structures - Part 1-2: General rules - Structural fire design; German version EN 1996-1-2:2005 (FOREIGN STANDARD)
DIN EN 1999-1-2:2007
Eurocode 9: Design of aluminium structures - Part 1-2: Structural fire design; German version EN 1999-1-2:2007 (FOREIGN STANDARD)
Classification of fires (FOREIGN STANDARD)
DIN EN 2:2005
DIN EN 250:2006
Respiratory equipment - Open-circuit self-contained compressed air diving apparatus - Requirements, testing, marking; German version EN 250:2000 + A1:2006 (FOREIGN STANDARD)
DIN EN 25663:1993
Water quality; determination of Kjeldahl nitrogen; method after mineralization with selenium (ISO 5663:1984) (FOREIGN STANDARD)
DIN EN 25813:1993
Water quality; determination of dissolved oxygen; iodometric method (ISO 5813:1983) (FOREIGN STANDARD)
DIN EN 25814:1992
Water quality; determination of dissolved oxygen by the electrochemical probe method (ISO 5814:1990) (FOREIGN STANDARD)
DIN EN 25923:1994
Fire protection; fire extinguishing media; carbon dioxide (ISO 5923:1989) (FOREIGN STANDARD)
DIN EN 26184-1:1991
Explosion protection systems; part 1: determination of explosion indices of combustible dust in air (ISO 6184-1:1985) (FOREIGN STANDARD)
DIN EN 26184-2:1991
Explosion protection systems; part 2: determination of explosion indices of combustible gases in air (ISO 6184-2:1985) (FOREIGN STANDARD)
DIN EN 26184-3:1991
Explosion protection systems; part 3: determination of explosion indices of fuel/air mixtures other than dust/air and gas/air mixtures (ISO 6184-3:1985) (FOREIGN STANDARD)
DIN EN 26184-4:1991
Explosion protection systems; part 4 : determination of efficacy of explosion suppression systems (ISO 6184-4:1985) (FOREIGN STANDARD)
DIN EN 26595:1993
Water quality; determination of total arsenic; silver diethyldithiocarbamate spectrophotometric method (ISO 6595:1982) (FOREIGN STANDARD)
DIN EN 26777:1993
Water quality; determination of nitrite; molecular absorption spectrometric method (ISO 6777:1984) (FOREIGN STANDARD)
DIN EN 269:1994
Respiratory protective devices - Powered fresh air hose breathing apparatus incorporating a hood - Requirements, testing and marking (FOREIGN STANDARD)
DIN EN 27243:1993
Hot environments; estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature) (ISO 7243:1989) (FOREIGN STANDARD)
DIN EN 27828:1994
Methods of biological sampling of water - Guidance on handnet sampling of aquatic benthic macro-invertebrates (ISO 7828:1985) (FOREIGN STANDARD)
DIN EN 27888:1993
Water quality; determination of electrical conductivity (ISO 7888:1985) (FOREIGN STANDARD)
Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of smoke density and gas components in the smoke of materials; test equipment, apparatus and media (FOREIGN STANDARD)
DIN EN 2824:1995
Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of smoke density (FOREIGN STANDARD)
DIN EN 2825:1995
Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of gas components in the smoke (FOREIGN STANDARD)
DIN EN 2826:1995
Design and use of quantitative samplers for benthic macro-invertebrates on stony substrata in shallow freshwaters (ISO 8265:1988) (FOREIGN STANDARD)
DIN EN 28265:1994
DIN EN 28662-1:1993
Hand-held portable power tools; measurement of vibrations at the handle; part 1: general (ISO 8662-1:1988) (FOREIGN STANDARD)
DIN EN 29241-2:1993
Ergonomic requirements for office work with visual display terminals (VDTs); part 2: guidance on task requirements (ISO 9241-2:1992) (FOREIGN STANDARD)
DIN EN 29241-3:1993
Ergonomic requirements for office work with visual display terminals (VDTs); part 3: visual display requirements (ISO 9241-3:1992) (FOREIGN STANDARD)
DIN EN 3 Beiblatt 2:2001
Interpretation document of EN 3 - Portable fire extinguishers (FOREIGN STANDARD)
DIN EN 340:2004
Protective clothing - General requirements (FOREIGN STANDARD)
DIN EN 341:1993
Personal protective equipment against falls from a height; descender devices (FOREIGN STANDARD)
DIN EN 342:2004
Protective clothing - Ensembles and garments for protection against cold (FOREIGN STANDARD)
DIN EN 342 Berichtigung 1:2008
Protective clothing - Ensembles and garments for protection against cold; German version EN 342:2004, Corrigendum to DIN EN 342:2004-09; German version EN 342:2004/AC:2008 (Foreign Standard)
Aerospace series - Cable, electrical, aircraft use - Test methods - Part 407: Flammability; German and English version EN 3475-407:2005 (FOREIGN STANDARD)
DIN EN 3475-407:2006
DIN EN 348:1992
Protective clothing; test method; determination of behaviour of materials on impact of small splashes of molten metal (FOREIGN STANDARD)
DIN EN 349:2008
Safety of machinery - Minimum gaps to avoid crushing of parts of the human body; German version EN 349:1993+A1:2008 (Foreign Standard)
DIN EN 349 Berichtigung 1:2009
Safety of machinery - Minimum gaps to avoid crushing of parts of the human body; German version EN 349:1993+A1:2008, Corrigendum to DIN EN 349:2008-09 (Foreign Standard)
DIN EN 352-4:2006
Hearing protectors - Safety requirements and testing - Part 4: Level-dependent ear-muffs (FOREIGN STANDARD)
DIN EN 352-5:2006
Hearing protectors - Safety requirements and testing - Part 5: Active noise reduction ear-muffs (FOREIGN STANDARD)
DIN EN 352-6:2003
Hearing protectors - Safety requirements and testing - Part 6: Ear-muffs with electrical audio input (FOREIGN STANDARD)
DIN EN 352-7:2003
Hearing protectors - Safety requirements and testing - Part 7: Level-dependent ear-plugs (FOREIGN STANDARD)
DIN EN 352-8:2008
Hearing protectors - Safety requirements and testing - Part 8: Entertainment audio ear-muffs; German version EN 352-8:2008 (FOREIGN STANDARD)
DIN EN 353-1:2002
Personal protective equipment against falls from a height - Part 1: Guided type fall arresters including a rigid anchor line (FOREIGN STANDARD)
DIN EN 353-2:2002
Personal protective equipment against falls from a height - Part 2: Guided type fall arresters including a flexible anchor line (FOREIGN STANDARD)
DIN EN 354:2002
Personal protective equipment against falls from a height - Lanyards (FOREIGN STANDARD)
DIN EN 355:2002
Personal protective equipment against falls from a height - Energy absorbers (FOREIGN STANDARD)
DIN EN 356:2000
Glass in building - Security glazing - Testing and classification of resistance against manual attack; English version of DIN EN 356 (FOREIGN STANDARD)
DIN EN 357:2005
Glass in building - Fire resistant glazed elements with transparent or translucent glass products - Classification of fire resistance (FOREIGN STANDARD)
DIN EN 358:2000
Personal protective equipment for work positioning and prevention of falls from a height - Belts for work positioning and restraint and work positioning alnyards; English version of DIN EN 358 (FOREIGN STANDARD)
DIN EN 360:2002
Personal protective equipment against falls from a height - Retractable type fall arresters (FOREIGN STANDARD)
DIN EN 361:2002
Personal protective equipment against falls from a height - Full body harnesses (FOREIGN STANDARD)
DIN EN 362:2008
Personal protective equipment against falls from a height - Connectors; German version EN 362:2004 (Foreign Standard)
DIN EN 363:2008
Personal fall protection equipment - Personal fall protection systems; German version EN 363:2008 (FOREIGN STANDARD)
DIN EN 364:1993
Personal protective equipment against falls from a height; test methods (FOREIGN STANDARD)
DIN EN 365:2004
Personal protective equipment against falls from a height - General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging (FOREIGN STANDARD)
DIN EN 365 Berichtigung 1:2007
Personal protective equipment against falls from a height - General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging; German version EN 365:2004, Corrigenda to DIN (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 367:1992
Protective clothing; protection against heat and flames; test method: determining of the heat transmission on exposure to flame (FOREIGN STANDARD)
DIN EN 3-7:2007
Portable fire extinguishers - Part 7: Characteristics, performance requirements and test methods; German version EN 3-7:2004+A1:2007 (FOREIGN STANDARD)
DIN EN 374-3 Berichtigung 1:2006
Protective gloves against chemicals and micro-organisms - Part 3: Determination of resistance to permeation by chemicals; German version EN 374-3:2003, Corrigendum to DIN EN 374-3:2003-12; German version EN 374-3:2003/AC:2006 (FOREIGN STANDARD)
DIN EN 379:2003
Personal eye protection - Automatic welding filters (FOREIGN STANDARD)
DIN EN 3-8:2007
Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 ba (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 381-1:1993
Protective clothing for users of hand held chain saws; part 1: test rig for testing resistance to cutting by a chain saw (FOREIGN STANDARD)
DIN EN 381-10:2003
Protective clothing for users of hand-held chainsaws - Part 10: Test method for upper body protectors (FOREIGN STANDARD)
DIN EN 381-11:2003
Protective clothing for users of hand-held chainsaws - Part 11: Requirements for upper body protectors (FOREIGN STANDARD)
DIN EN 381-2:1995
Protective clothing for users of hand-held chain saws - Test methods for leg protectors (FOREIGN STANDARD)
DIN EN 381-3:1996
Protective clothing for users of hand-held chain saws - Test methods for footwear (FOREIGN STANDARD)
DIN EN 381-4:1999
Protective clothing for users of hand-held chain saws - Part 4: Test methods for chain saw protective gloves (FOREIGN STANDARD)
DIN EN 381-5:1995
Protective clothing for users of hand-held chain saws - Requirements for leg protectors (FOREIGN STANDARD)
DIN EN 381-7:1999
Protective clothing for users of hand-held chain saws - Part 7: Requirements for chain saw protective gloves (FOREIGN STANDARD)
DIN EN 381-8:1997
Protective clothing for users of hand-held chain saws - Part 8: Test methods for chain saw protective gaiters (FOREIGN STANDARD)
DIN EN 381-9:1997
Protective clothing for users of hand-held chain saws - Part 9: Requirements for chain saw protective gaiters (FOREIGN STANDARD)
Aerospace series - Flammability of non-metallic materials - Part 1: Small burner test, vertical; determination of the vertical flame propagation (FOREIGN STANDARD)
DIN EN 3844-1:1995
Aerospace series - Flammability of non-metallic materials - Part 2: Small burner test, horizontal; determination of the horizontal flame propagation (FOREIGN STANDARD)
DIN EN 3844-2:1995
Aerospace series - Flammability of non-metallic materials - Part 3: Small burner test, 45?; determination of the resistance of material to flame and glow propagation and to flame penetration (FOREIGN STANDARD)
DIN EN 3844-3:1995
DIN EN 3-9:2007
Portable fire extinguishers - Part 9: Additional requirements to EN 3-7 for pressure resistance of CO2 extinguishers; German version EN 3-9:2006 (FOREIGN STANDARD)
DIN EN 397:2000
Industrial safety helmets (includes Amendment A1:2000); English version of DIN EN 397:1995 + A1:2000 (FOREIGN STANDARD)
DIN EN 402:2003
Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape - Requirements, testing, marking (FOREIGN STANDARD)
DIN EN 403:2004
Respiratory protective devices for self-rescue - Filtering devices with hood for escape from fire - Requirements, testing, marking (FOREIGN STANDARD)
DIN EN 404:2005
Respiratory protective devices for self-rescue - Filter self-rescuer from carbon monoxide with mouthpiece assembly (FOREIGN STANDARD)
DIN EN 405:2002
Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking; English version of DIN EN 405 (FOREIGN STANDARD)
Aerospace series - Cable ties for harnesses - Test methods - Part 302: Flammability; German and English version EN 4057-302:2006 (FOREIGN STANDARD)
DIN EN 4057-302:2008
DIN EN 407:2004
Protective gloves against thermal risks (heat and/or fire) (FOREIGN STANDARD)
DIN EN 421:1994
Protective gloves against ionizing radiation and radioactive contamination (FOREIGN STANDARD)
DIN EN 443:2008
Helmets for fire fighting in buildings and other structures; German version EN 443:2008 (FOREIGN STANDARD)
DIN EN 45510-4-1:1999
Guide to procurement of power station equipment - Part 4-1: Boiler auxiliaries - Equipment for reduction of dust emissions (FOREIGN STANDARD)
DIN EN 45510-4-10:1999
Guide for procurement of power station equipment - Part 4-10: Boiler auxiliaries - Flue gas denitrification (De-NO<(Index)x>) plant (FOREIGN STANDARD)
DIN EN 45510-4-6:1999
Guide to procurement of power station equipment - Part 4-6: Boiler auxiliaries - Flue gas desulphurization (DeSO<(Index)x>) plant (FOREIGN STANDARD)
DIN EN 458:2005
Hearing protectors - Recommendations for selection, use, care and maintenance - Guidance document (FOREIGN STANDARD)
DIN EN 464:1994
Protective clothing for use against liquid and gaseous chemicals, including aerosols and solid particles - Determination of leak tightness of gastight suits (Internal pressure test) (FOREIGN STANDARD)
Aerospace series - Handheld fire extinguishers with synthesis gases, for aircraft use - Technical specification and qualification conditions; German and English version prEN 4649:2008 (Foreign Standard)
DIN EN 4649:2008
DIN EN 469:2007
Protective clothing for firefighters - Performance requirements for protective clothing for firefighting; German version EN 469:2005 + A1:2006 + AC:2006 (FOREIGN STANDARD)
DIN EN 481:1993
Workplaces atmospheres; size fraction definitions for measurement of airborne particles (FOREIGN STANDARD)
DIN EN 482:2006
Workplace atmospheres - General requirements for the performance of procedures for the measurement of chemical agents; German version EN 482:2006 (FOREIGN STANDARD)
DIN EN 510:1993
Specifications for protective clothing for use where there is a risk of entanglement with moving parts (FOREIGN STANDARD)
DIN EN 511:2006
Protective gloves against cold; German version EN 511:2006 (FOREIGN STANDARD)
DIN EN 529:2006
Respiratory protective devices - Recommendations for selection, use, care and maintenance - Guidance document (FOREIGN STANDARD)
Abrasion resistance of protective clothing material - Test methods (FOREIGN STANDARD)
DIN EN 530:1995
DIN EN 54-1:1996
Fire detection and fire alarm systems - Part 1: Introduction (FOREIGN STANDARD)
DIN EN 54-10/A1:2006
Fire detection and fire alarm systems - Part 10: Flame detectors - Point detectors (FOREIGN STANDARD)
DIN EN 54-10:2002
Fire detection and fire alarm systems - Part 10: Flame detectors; Point detectors; English version of DIN EN 54-10 (FOREIGN STANDARD)
DIN EN 54-11/A1:2006
Fire detection and fire alarm systems - Part 11: Manual call points (FOREIGN STANDARD)
DIN EN 54-11:2001
Fire detection and fire alarm systems - Part 11: Manual call points; English version of DIN EN 54-11 (FOREIGN STANDARD)
DIN EN 54-12:2003
Fire detection and fire alarm systems - Part 12: Smoke detectors; Line detectors using an optical light beam (FOREIGN STANDARD)
DIN EN 54-13:2005
Fire detection and fire alarm systems - Part 13: Compatibility assessment of system components (FOREIGN STANDARD)
DIN EN 54-16:2008
Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment; German version EN 54-16:2008 (FOREIGN STANDARD)
DIN EN 54-17:2006
Fire detection and fire alarm systems - Part 17: Short-circuit isolators (FOREIGN STANDARD)
DIN EN 54-18:2006
Fire detection and fire alarm systems - Part 18: Input/output devices (FOREIGN STANDARD)
DIN EN 54-18 Berichtigung 1:2007
Fire detection and fire alarm systems - Part 18: Input/output devices; German version EN 54-18:2005, Corrigenda to DIN EN 54-18:2006-03; German version EN 54-18:2005/AC:2007 (FOREIGN STANDARD)
DIN EN 54-2/A1:2007
Fire detection and fire alarm systems - Part 2: Control and indicating equipment; German version EN 54-2:1997/A1:2006 (FOREIGN STANDARD)
DIN EN 54-2:1997
Fire detection and fire alarm systems - Part 2: Control and indicating equipment (FOREIGN STANDARD)
DIN EN 54-20:2009
Fire detection and fire alarm systems - Part 20: Aspirating smoke detectors; German version EN 54-20:2006+AC:2008 (Foreign Standard)
DIN EN 54-21:2006
Fire detection and fire alarm systems - Part 21: Alarm transmission and fault warning routing equipment; German version EN 54-21:2006 (FOREIGN STANDARD)
DIN EN 54-24:2008
Fire detection and fire alarm systems - Part 24: Components of voice alarm systems - Loudspeakers; German version EN 54-24:2008 (FOREIGN STANDARD)
DIN EN 54-25:2009
Fire detection and fire alarm systems - Part 25: Components using radio links; German version EN 54-25:2008 (Foreign Standard)
DIN EN 54-3:2006
Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders; German version EN 54-3:2001 + A1:2002 + A2:2006 (FOREIGN STANDARD)
DIN EN 54-4/A1:2003
Fire detection and fire alarm systems - Part 4: Power supply equipment; Amendment A1 (FOREIGN STANDARD)
DIN EN 54-4/A2:2007
Fire detection and fire alarm systems - Part 4: Power supply equipment; German version EN 54-4:1997/A2:2006 (FOREIGN STANDARD)
DIN EN 54-4:1997
Fire detection and fire alarm systems - Part 4: Power supply equipment (FOREIGN STANDARD)
DIN EN 54-5/A1:2002
Fire detection and fire alarm systems - Part 5: Heat detectors; Point detectors; Amendment A1 (FOREIGN STANDARD)
DIN EN 54-5:2001
Fire detection and fire alarm systems - Part 5: Heat detectors; Point detectors; English version of DIN EN 54-5 (FOREIGN STANDARD)
DIN EN 54-7:2006
Fire detection and fire alarm systems - Part 7: Smoke detectors - Point detectors using scattered light, transmitted light or ionization; German version EN 54-7:2000 + A1:2002 + A2:2006 (FOREIGN STANDARD)
DIN EN 547-1:2009
Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery; German version EN 547-1:1996+A1:2008 (Foreign Standard)
DIN EN 547-2:2009
Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings; German version EN 547-2:1996+A1:2008 (Foreign Standard)
DIN EN 547-3:2009
Safety of machinery - Human body measurements - Part 3: Anthropometric data; German version EN 547-3:1996+A1:2008 (Foreign Standard)
DIN EN 574:2008
Safety of machinery - Two-hand control devices - Functional aspects - Principles for design; German version EN 574:1996+A1:2008 (Foreign Standard)
Assessment of the ignitability of mattresses and upholstered bed bases - Ignition source: Smouldering cigarette (FOREIGN STANDARD)
DIN EN 597-1:1995
Assessment of the ignitability of mattresses and upholstered bed bases - Ignition source: Match flame equivalent (FOREIGN STANDARD)
DIN EN 597-2:1995
Aerospace series - Electrical cables, installation, protection sleeves; test methods - Part 304: Flammability (FOREIGN STANDARD)
DIN EN 6059-304:1998
DIN EN 60645-6:2008
Electroacoustics - Audiometric equipment - Part 6: Instruments for the measurement of otoacoustic emissions (IEC 29/635/CDV:2007); German version prEN 60645-6:2007 (FOREIGN STANDARD)
DIN EN 614-1:2006
Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles; German version EN 614-1:2006 (FOREIGN STANDARD)
DIN EN 614-2:2008
Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks; German version EN 614-2:2000+A1:2008 (Foreign Standard)
DIN EN 626-1:2008
Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers; German version EN 626-1:1994+A1:2008 (Foreign Standard)
DIN EN 626-1 Berichtigung 1:2009
Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers; German version EN 626-1:1994+A1:2008, Corrigendum to DIN EN 626-1:2008-09 (Foreign Stand
DIN EN 626-2:2008
Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures; German version EN 626-2:1996+A1:2008 (Foreign Standard)
DIN EN 626-2 Berichtigung 1:2009
Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures; German version EN 626-2:1996+A1:2008, Corrigendum to DIN EN 626-2:2008-09 (Foreign Standard)
DIN EN 659:2008
Protective gloves for firefighters; German version EN 659:2003+A1:2008 (FOREIGN STANDARD)
DIN EN 671-1:2001
Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose; English version of DIN EN 671-1 (FOREIGN STANDARD)
Corrigendum to DIN EN 671-1:2001-08 (EN 671-1:2001/AC:2002) (FOREIGN STANDARD)
DIN EN 671-1 Berichtigung 1:2002
DIN EN 671-2/A1:2004
Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose (FOREIGN STANDARD)
DIN EN 671-2:2001
Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose; English version of DIN EN 671-2 (FOREIGN STANDARD)
DIN EN 671-3:2000
Fixed firefighting systems - Hose systems - Part 3: Maintenance of hose reels with semi-rigid hose and hose systems with lay-flat hose (includes Corrigendum AC:2000); English version of DIN EN 671-3:2000 + AC:2000 (FOREIGN STANDARD)
DIN EN 689:1995
Workplace atmospheres - Guidance for the assessment of exposure by inhalation to chemical agents for comparison with limit values and measurement strategy (FOREIGN STANDARD)
DIN EN 694:2007
Fire-fighting hoses - Semi-rigid hoses for fixed systems; German version EN 694:2001 + AC:2002 + AC:2003 + A1:2007 (FOREIGN STANDARD)
DIN EN 702:1995
Protective clothing for use against heat and flame - Determination of the contact heat transmission through protective clothing or its materials (FOREIGN STANDARD)
DIN EN 71-2:2007
Safety of toys - Part 2: Flammability; German version EN 71-2:2006 + A1:2007 (FOREIGN STANDARD)
DIN EN 795/A1:2001
Protection against falls from a height - Anchor devices - Requirements and testing; English version of DIN EN 795:1996/A1:2000 (FOREIGN STANDARD)
DIN EN 795:1996
Protection against falls from a height - Anchor devices - Requirements and testing (FOREIGN STANDARD)
DIN EN 812:2002
Industrial bump caps (includes Amendment A1:2001); English version of DIN EN 812:1997+A1:2001 (FOREIGN STANDARD)
DIN EN 81-28:2003
Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 28: Remote alarms on passenger and goods passenger lifts (FOREIGN STANDARD)
DIN EN 813:2008
Personal fall protection equipment - Sit harnesses; German version EN 813:2008 (Foreign Standard)
DIN EN 81-58:2003
Safety rules for the construction and installation of lifts - Examination and tests - Part 58: Landing doors fire resistance test (FOREIGN STANDARD)
DIN EN 81-73:2005
Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 73: Behaviour of lifts in the event of fire (FOREIGN STANDARD)
DIN EN 838:1995
Workplace atmospheres - Diffusive samplers for the determination of gases and vapours - Requirements and test methods (FOREIGN STANDARD)
DIN EN 840-6:2008
Mobile waste containers - Part 6: Safety and health requirements; German version EN 840-6:2004+A1:2008 (Foreign Standard)
DIN EN 842:2009
Safety of machinery - Visual danger signals - General requirements, design and testing; German version EN 842:1996+A1:2008 (Foreign Standard)
DIN EN 858-2:2003
Separator systems for light liquids (e.g. oil and petrol) - Part 2: Selection of nominal size, installation, operation and maintenance (FOREIGN STANDARD)
DIN EN 863:1995
Mechanical properties of protective clothing - Determination of puncture resistance (FOREIGN STANDARD)
DIN EN 872:2005
Water quality - Determination of suspended solids - Method by filtration through glass fibre filters (FOREIGN STANDARD)
DIN EN 894-1:2009
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators; German version EN 894-1:1997+A1:2008 (Foreign Standard)
DIN EN 894-2:2009
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays; German version EN 894-2:1997+A1:2008 (Foreign Standard)
DIN EN 894-3:2009
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators; German version EN 894-3:2000+A1:2008 (Foreign Standard)
Determination of anionic surfactants in water by measurement of the methylene blue active substances (MBAS) by measurement of the methylene blue active substances (MBAS) index (ISO 7875-1:1984, modified) (FOREIGN STANDARD)
DIN EN 903:1994
DIN EN 943-1:2002
Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 1: Performance requirements for ventilated and non-ventilated 'gas-tight' (Type 1) and 'non-gas-tight' (Typ (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 943-2:2002
Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 2: Performance requirements for gas-tight (Type 1) chemical protective suits for emergency teams (ET); Engl (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 953:1997
Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards (FOREIGN STANDARD)
DIN EN 960:2006
Headforms for use in the testing of protective helmets; German version EN 960:2006 (FOREIGN STANDARD)
DIN EN 966:2006
Helmets for airborne sports; German version EN 966:1996 + A1:2000 + A2:2006 (FOREIGN STANDARD)
DIN EN 981:2009
Safety of machinery - System of auditory and visual danger and information signals; German version EN 981:1996+A1:2008 (Foreign Standard)
DIN EN 999:2008
Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body; German version EN 999:1998+A1:2008 (Foreign Standard)
DIN V 38407-11:1995
German standard methods for the examination of water, waste water and sludge - Substance group analysis (group F) - Determination of selected organic pesticides by automated multiple development (AMD) (F 11) (FOREIGN STANDARD)
DIN-Fachbericht CEN/TR 12566-2:2007
Small wastewater treatment systems for up to 50 PT - Part 2: Soil infiltration systems; German version CEN/TR 12566-2:2005 (FOREIGN STANDARD)
Characterization of sludges - Good practice for sludge drying (FOREIGN STANDARD)
DIN-Fachbericht CEN/TR 15473:2007




Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm

No comments:

Post a Comment