2009/09/07

Cheapest & Latest DIN Standard (PDF) (36)

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm


DIN EN 975-1:2009
Sawn timber - Appearance grading of hardwoods - Part 1: Oak and beech; German version EN 975-1:2009 (Foreign Standard)
DIN EN 942:2007
Timber in joinery - General requirements; German version EN 942:2007 (FOREIGN STANDARD)
DIN EN 940:1997
Safety of woodworking machines - Combined woodworking machines (FOREIGN STANDARD)
DIN EN 860:2007
Safety of woodworking machines - One side thickness planing machines; German version EN 860:2007 (FOREIGN STANDARD)
DIN EN 859:2007
Safety of woodworking machines - Hand fed surface planing machines; German version EN 859:2007 (FOREIGN STANDARD)
DIN EN 848-3:2007
Safety of woodworking machines - One side moulding machines with rotating tools - Part 3: Numerically controlled (NC) boring and routing machines; German version EN 848-3:2007 (FOREIGN STANDARD)
DIN EN 848-2:2007
Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines; German version EN 848-2:2007 (FOREIGN STANDARD)
DIN EN 848-1:2007
Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines; German version EN 848-1:2007 (FOREIGN STANDARD)
DIN EN 847-3:2004
Tools for woodworking - Safety requirements - Part 3: Clamping devices (FOREIGN STANDARD)
DIN EN 789:2005
Timber structures - Test methods - Determination of mechanical properties of wood based panels (FOREIGN STANDARD)
DIN EN 717-3:1996
Wood-based panel products - Determination of formaldehyde release by the flask method (FOREIGN STANDARD)
DIN EN 717-2:1995
Wood-based panel products -Determination of formaldehyde release by the gas analysis method (FOREIGN STANDARD)
DIN EN 717-1:2005
Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method (FOREIGN STANDARD)
DIN EN 672:1997
Resilient floor coverings - Determination of apparent density of agglomerated cork (FOREIGN STANDARD)
DIN EN 636:2003
Plywood - Specifications (FOREIGN STANDARD)
DIN EN 635-5:1999
Plywood - Classification by surface appearance - Part 5: Methods for measuring and expressing characteristics and defects (FOREIGN STANDARD)
DIN EN 635-3:1995
Classification of plywood by surface appearance - Softwood (FOREIGN STANDARD)
DIN EN 635-2:1995
Classification of plywood by surface appearance - Hardwood (FOREIGN STANDARD)
DIN EN 635-1:1995
Classification of plywood by surface appearance - General (FOREIGN STANDARD)
DIN EN 634-2:2007
Cement-bonded particleboards - Specifications - Part 2: Requirements for OPC bonded particleboards for use in dry, humid and external conditions; German version EN 634-2:2007 (FOREIGN STANDARD)
DIN EN 634-1:1995
Cement-bonded particleboard - General requirements (FOREIGN STANDARD)
DIN EN 622-5:2006
Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF); German version EN 622-5:2006 (FOREIGN STANDARD)
DIN EN 622-4:1997
Fibreboard - Specifications - Part 4: Requirements for softboard (FOREIGN STANDARD)
DIN EN 622-2 Berichtigung 1:2006
Fibreboards - Specifications - Part 2: Requirements for hardboards - German version EN 622-2:2004, Corrigenda to DIN EN 622-2:2004-07; German version EN 622-2:2004/AC:2005 (FOREIGN STANDARD)
DIN EN 460:1994
Natural durability of solid wood - Guide to the durability requirements for wood to be used in hazard classes (FOREIGN STANDARD)
DIN EN 392:1996
Glued laminated timber - Shear test of glue lines (FOREIGN STANDARD)
DIN EN 391:2002
Glued laminated timber - Delamination test of glue lines; English version of DIN EN 391 (FOREIGN STANDARD)
DIN EN 390:1995
Glued laminated timber - Sizes and permissible deviations (FOREIGN STANDARD)
DIN EN 387:2002
Glued laminated timber - Large finger joints - Performance requirements and minimum production requirements; English version of DIN EN 387 (FOREIGN STANDARD)
DIN EN 386:2002
Glued laminated timber - Performance requirements and minimum production requirements; English version of DIN EN 386 (FOREIGN STANDARD)
DIN EN 382-2:1994
Fibreboard - Determination of surface absorption - Test method for hardboard (FOREIGN STANDARD)
DIN EN 382-1:1993
Fibreboards; determination of surface absorption; part 1: test method for dry process fibreboards (FOREIGN STANDARD)
DIN EN 350-2:1994
Natural durability of solid wood - Guide to the natural durability and treatability of selected wood species of importance inope (FOREIGN STANDARD)
DIN EN 350-1:1994
Natural durability of solid wood - Guide to the principles of testing and classification of the natural durability of wood (FOREIGN STANDARD)
DIN EN 335-2:2006
Durability of wood and wood-based products - Definition of use classes - Part 2: Application to solid wood; German version EN 335-2:2006 (FOREIGN STANDARD)
DIN EN 335-1:2006
Durability of wood and wood-based products - Definition of use classes - Part 1: General; German version EN 335-1:2006 (FOREIGN STANDARD)
DIN EN 326-2 Berichtigung 1:2006
Wood-based panels - Sampling, cutting and inspection - Part 2: Quality control in the factory - German version EN 326-2:2000, Corrigenda to DIN EN 326-2:2000-10; German version EN 326-2:2000/AC:2005 (FOREIGN STANDARD)
DIN EN 326-2:2000
Wood-based panels - Sampling, cutting and inspection - Part 2: Quality control in the factory; English version of DIN EN 326-2 (FOREIGN STANDARD)
DIN EN 326-1:1994
Sampling, cutting and inspection of wood-based panel products - Sampling and cutting of test pieces and expression of test results (FOREIGN STANDARD)
DIN EN 325:1993
Wood-based panels; determination of dimensions of test pieces (FOREIGN STANDARD)
DIN EN 324-2:1993
Wood-based panels; determination of dimensions of boards; part 2: determination of squareness and edge straightness (FOREIGN STANDARD)
DIN EN 324-1:1993
Wood-based panels; determination of dimensions of boards; part 1: determination of thickness, width and length (FOREIGN STANDARD)
DIN EN 323:1993
Wood-based panels; determination of density (FOREIGN STANDARD)
DIN EN 322:1993
Wood-based panels; determination of moisture content (FOREIGN STANDARD)
DIN EN 321:2002
Wood-based panels - Determination of moisture resistance under cyclic test conditions; English version of DIN EN 321 (FOREIGN STANDARD)
DIN EN 320:1993
Fibreboards; determination of resistance to axial withdrawal of screws (FOREIGN STANDARD)
DIN EN 319:1993
Particleboards and fibreboards; determination of tensile strength perpendicular to the plane of the board (FOREIGN STANDARD)
DIN EN 318:2002
Wood-based panels - Determination of dimensional changes associated with changes in relative humidity; English version of DIN EN 318 (FOREIGN STANDARD)
DIN EN 317:1993
Particleboards and fibreboards; determination of swelling in thickness after immersion in water (FOREIGN STANDARD)
DIN EN 316:2009
Wood fibreboards - Definition, classification and symbols; German version EN 316:2009 (Foreign Standard)
DIN EN 315:2000
Plywood - Tolerances for dimensions; English version of DIN EN 315 (FOREIGN STANDARD)
DIN EN 314-2:1993
Plywood; bonding quality; part 2: requirements (FOREIGN STANDARD)
DIN EN 314-1:2005
Plywood - Bonding quality - Part 1: Test methods (FOREIGN STANDARD)
DIN EN 313-1:1996
Plywood - Classification and terminology - Classification (FOREIGN STANDARD)
DIN EN 312:2003
Particleboards - Specifications (FOREIGN STANDARD)
DIN EN 311:2002
Wood-based panels - Surface soundness - Test method (FOREIGN STANDARD)
DIN EN 310:1993
Wood-based panels; determination of modulus of elasticity in bending and of bending strength (FOREIGN STANDARD)
DIN EN 309:2005
Particleboards - Definition and classification (FOREIGN STANDARD)
DIN EN 300:2006
Oriented Strand Boards (OSB) - Definitions, classification and specifications; German version EN 300:2006 (FOREIGN STANDARD)
DIN EN 1927-3:2008
Qualitative classification of softwood round timber - Part 3: Larches and Douglas fir; German version EN 1927-3:2008 (FOREIGN STANDARD)
DIN EN 1927-2:2008
Qualitative classification of softwood round timber - Part 2: Pines; German version EN 1927-2:2008 (FOREIGN STANDARD)
DIN EN 1927-1:2008
Qualitative classification of softwood round timber - Part 1: Spruces and firs; German version EN 1927-1:2008 (FOREIGN STANDARD)
DIN EN 1910:2000
Wood and parquet flooring and wood panelling and cladding - Determination of dimensional stability; English version of DIN EN 1910 (FOREIGN STANDARD)
DIN EN 1870-9:2000
Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading; English version of DIN EN 1870-9 (FOREIGN STANDARD)
DIN EN 1870-7:2002
Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading; English version of DIN EN 1870-7 (FOREIGN STANDARD)
DIN EN 1870-6:2002
Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches with manual loading and/or unloading (FOREIGN STANDARD)
DIN EN 1870-5:2002
Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up-cutting cross-cut sawing machines (FOREIGN STANDARD)
DIN EN 1870-4:2002
Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading; English version of DIN EN 1870-4 (FOREIGN STANDARD)
DIN EN 1870-17:2007
Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (manual radial arm saws); German version EN 1870-17:2007 (FOREIGN STANDARD)
DIN EN 1870-16:2005
Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V-cutting (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 1870-15:2005
Safety of woodworking machines - Circular sawing machines - Part 15: Multiblade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading (FOREIGN STANDARD)
DIN EN 1870-14:2008
Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines; German version EN 1870-14:2007 (FOREIGN STANDARD)
DIN EN 1870-13:2008
Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines; German version EN 1870-13:2007 (FOREIGN STANDARD)
DIN EN 1870-12:2004
Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross cut-sawing machines (FOREIGN STANDARD)
DIN EN 1870-11 Berichtigung 1:2007
Safety of woodworking machines - Circular sawing machines - Part 11: Semi-automatic and automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws); German version EN 1870-11:2003, Corrigenda to (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 1870-11:2003
Safety of woodworking machines - Circular sawing machines - Part 11: Semi-automatic and automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws) (FOREIGN STANDARD)
DIN EN 1870-10:2004
Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines (FOREIGN STANDARD)
DIN EN 1870-1:2009
Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws; German version EN 1870-1:2007+A1:2009 (Foreign Standard)
DIN EN 1807:1999
Safety of wood working machines - Band sawing machines (FOREIGN STANDARD)
DIN EN 1611-1:2002
Sawn timber - Appearance grading of softwood - Part 1: European spruces, firs, pines, Douglas firs and larches (includes Amendment A1:2002) (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 1534:2000
Wood and parquet flooring - Determination of resistance to indentation (Brinell) - Test method; English version of DIN EN 1534 (FOREIGN STANDARD)
DIN EN 1533:2000
Wood and parquet flooring - Determination of bending properties - Test methods; English version of DIN EN 1533 (FOREIGN STANDARD)
DIN EN 15197:2007
Wood-based panels - Flaxboards - Specifications; German version EN 15197:2007 (FOREIGN STANDARD)
DIN EN 15146:2007
Solid softwood panelling and cladding - Machined profiles without tongue and groove; German version EN 15146:2006 (FOREIGN STANDARD)
DIN EN 14951:2006
Solid hardwood panelling and cladding - Machined profiles elements; German version EN 14951:2006 (FOREIGN STANDARD)
DIN EN 14915 Berichtigung 1:2007
Solid wood panelling and cladding - Characteristics, evaluation of conformity and marking; German version EN 14915:2006, Corrigenda to DIN EN 14915:2006-11; German version EN 14915:2006/AC:2007 (FOREIGN STANDARD)
DIN EN 14915:2006
Solid wood panelling and cladding - Characteristics, evaluation of conformity and marking; German version EN 14915:2006 (FOREIGN STANDARD)
DIN EN 14762:2006
Wood flooring - Sampling procedures for evaluation of conformity; German version EN 14762:2006 (FOREIGN STANDARD)
DIN EN 14761:2008
Wood flooring - Solid wood parquet - Vertical finger, wide finger and module brick; German version EN 14761:2006+A1:2008 (Foreign Standard)
DIN EN 14755:2006
Extruded particleboards - Specifications (FOREIGN STANDARD)
DIN EN 14519:2006
Solid softwood panelling and cladding - Machined profiles with tongue and groove (FOREIGN STANDARD)
DIN EN 14374:2005
Timber structures - Structural laminated veneer lumber - Requirements (FOREIGN STANDARD)
DIN EN 14358:2007
Timber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample; German version EN 14358:2006 (FOREIGN STANDARD)
DIN EN 14354:2005
Wood-based panels - Wood veneer floor covering (FOREIGN STANDARD)
DIN EN 14342:2008
Wood flooring - Characteristics, evaluation of conformity and marking; German version EN 14342:2005+A1:2008 (Foreign Standard)
DIN EN 14323:2004
Wood-based panels - Melamine faced boards for interior uses - Test methods (FOREIGN STANDARD)
DIN EN 14322:2004
Wood-based panels - Melamine faced boards for interior uses - Definitons, requirements and classification (FOREIGN STANDARD)
DIN EN 14298:2005
Sawn timber - Assessment of drying quality (FOREIGN STANDARD)
DIN EN 14279:2009
Laminated Veneer Lumber (LVL) - Definitions, classification and specifications; German version EN 14279:2004+A1:2009 (Foreign Standard)
DIN EN 14251:2004
Structural round timber - Test methods (FOREIGN STANDARD)
DIN EN 14221:2007
Timber and wood-based materials in internal windows, internal door leaves and internal doorframes - Requirements and specifications; German version EN 14221:2006 (FOREIGN STANDARD)
DIN EN 14220:2007
Timber and wood-based materials in external windows, external door leaves and external doorframes - Requirements and specifications; German version EN 14220:2006 (FOREIGN STANDARD)
DIN EN 14081-4:2009
Timber structures - Strength graded structural timber with rectangular cross section - Part 4: Machine grading - Grading machine settings for machine controlled systems; German version EN 14081-4:2005+A4:2008 (Foreign Standard)
DIN EN 14081-3:2006
Timber structures - Strength graded structural timber with rectangular cross section - Part 3: Machine grading; additional requirements for factory production control (FOREIGN STANDARD)
DIN EN 14081-2:2006
Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine grading; additional requirements for initial type testing (FOREIGN STANDARD)
DIN EN 14081-1:2006
Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements (FOREIGN STANDARD)
DIN EN 14080:2005
Timber structures - Glued laminated timber - Requirements (FOREIGN STANDARD)
DIN EN 13990:2004
Wood flooring - Solid softwood floor boards (FOREIGN STANDARD)
DIN EN 13986:2005
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking (FOREIGN STANDARD)
DIN EN 13879:2002
Wood-based panels - Determination of edgewise bending properties (FOREIGN STANDARD)
DIN EN 13810-1:2003
Wood-based panels - Floating floors - Part 1: Performance specifications and requirements (FOREIGN STANDARD)
DIN EN 13696:2009
Wood flooring - Test methods to determine elasticity and resistance to wear and impact resistance; German version EN 13696:2008 (Foreign Standard)
DIN EN 13647:2003
Wood and parquet flooring and wood panelling and cladding - Determination of geometrical characteristics (FOREIGN STANDARD)
DIN EN 13629 Berichtigung 1:2007
Wood flooring - Solid pre-assembled hardwood board; German version EN 13629:2002, Corrigenda to DIN EN 13629:2003-06; German version EN 13629:2002/AC:2007 (FOREIGN STANDARD)
DIN EN 13629:2003
Wood flooring - Solid pre-assembled hardwood board (FOREIGN STANDARD)
DIN EN 13489:2003
Wood flooring - Multi-layer parquet elements (FOREIGN STANDARD)
DIN EN 13488:2003
Wood flooring - Mosaic parquet elements (FOREIGN STANDARD)
DIN EN 13442:2003
Wood and parquet flooring and wood panelling and cladding - Determination of the resistance to chemical agents (FOREIGN STANDARD)
DIN EN 13354:2009
Solid wood panels (SWP) - Bonding quality - Test method; German version EN 13354:2008 (Foreign Standard)
DIN EN 13353:2009
Solid wood panels (SWP) - Requirements; German version EN 13353:2008 (Foreign Standard)
DIN EN 13307-1:2007
Timber blanks and semi-finished profiles for non-structural uses - Part 1: Requirements; German version EN 13307-1:2006 (FOREIGN STANDARD)
DIN EN 1328:1996
Cement-bonded particleboard - Determination of frost resistance (FOREIGN STANDARD)
DIN EN 13228 Berichtigung 1:2007
Wood flooring - Solid wood overlay flooring elements including blocks with an interlocking system; German version EN 13228:2002, Corrigenda to DIN EN 13228:2003-06; German version EN 13228:2002/AC:2007 (FOREIGN STANDARD)
DIN EN 13228:2003
Wood flooring - Solid wood overlay flooring elements including blocks with an interlocking system (FOREIGN STANDARD)
DIN EN 13227 Berichtigung 1:2007
Wood flooring - Solid lamparquet products; German version EN 13227:2002, Corrigenda to DIN EN 13227:2003-06; German version EN 13227:2002/AC:2007 (FOREIGN STANDARD)
DIN EN 13227:2003
Wood flooring - Solid lamparquet products (FOREIGN STANDARD)
DIN EN 13226:2003
Wood flooring - Solid parquet element with grooves and/or tongues (FOREIGN STANDARD)
DIN EN 13183-3:2005
Moisture content of a piece of sawn timber - Part 3: Estimation by capacitance method (FOREIGN STANDARD)
DIN EN 13183-2:2002
Moisture content of a piece of sawn timber - Part 2: Estimation by electrical resistance method (FOREIGN STANDARD)
DIN EN 13183-1:2002
Moisture content of a piece of sawn timber - Part 1: Determination by oven dry method (FOREIGN STANDARD)
DIN EN 1316-3:1997
Hardwood round timber - Qualitative classification - Part 3: Ash and maples (FOREIGN STANDARD)
DIN EN 1316-2:1997
Hardwood round timber - Qualitative classification - Part 2: Poplar (FOREIGN STANDARD)
DIN EN 1316-1:1997
Hardwood round timber - Qualitative classification - Part 1: Oak and beech (FOREIGN STANDARD)
DIN EN 1315-2:1997
Dimensional classification of timber - Part 2: Softwood round timber (FOREIGN STANDARD)
DIN EN 1315-1:1997
Dimensional classification of timber - Part 1: Hardwood round timber (FOREIGN STANDARD)
DIN EN 13145:2001
Railway applications - Track - Wood sleepers and bearers; English version of DIN EN 13145 (FOREIGN STANDARD)
DIN EN 1313-2:1999
Round and sawn timber - Permitted deviations and preferred sizes - Part 2: Hardwood sawn timber (FOREIGN STANDARD)
DIN EN 1313-1:1999
Round and sawn timber - Permitted deviations and preferred sizes - Part 1: Softwood sawn timber (includes Amendment A1:1999) (FOREIGN STANDARD)
DIN EN 1312:1997
Round and sawn timber - Determination of the batch volume of sawn timber (FOREIGN STANDARD)
DIN EN 1311:1997
Round and sawn timber - Method of measurement of biological degradation (FOREIGN STANDARD)
DIN EN 1310:1997
Round and sawn timber - Method of measurement of features (FOREIGN STANDARD)
DIN EN 1309-2:2006
Round and sawn timber - Method of measurement of dimensions - Part 2: Round timber - Requirements for measurement and volume calculation rules; German version EN 1309-2:2006 (FOREIGN STANDARD)
DIN EN 1309-1:1997
Round and sawn timber - Method of measurement of dimensions - Part 1: Sawn timber (FOREIGN STANDARD)
DIN EN 13085:2001
Wallcoverings - Specifications for cork rolls; English version of DIN EN 13085 (FOREIGN STANDARD)
DIN EN 13017-2:2001
Solid wood panels - Classification by surface appearance - Part 2: Hardwood; English version of DIN EN 13017-2 (FOREIGN STANDARD)
DIN EN 13017-1:2001
Solid wood panels - Classification by surface appearance - Part 1: Softwood; English version of DIN EN 13017-1 (FOREIGN STANDARD)
DIN EN 12871:2001
Wood-based panels - Performance specifications and requirements for loadbearing boards for use in floors, walls and roofs; English version of DIN EN 12871 (FOREIGN STANDARD)
DIN EN 12781:2001
Wallcoverings - Specification for cork panels;English version of DIN EN 12781 (FOREIGN STANDARD)
DIN EN 12779:2005
Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety related performances and safety requirements (FOREIGN STANDARD)
DIN EN 12750:2002
Safety of woodworking machines - Four-sided moulding machines; English version of DIN EN 12750 (FOREIGN STANDARD)
DIN EN 12369-3:2009
Wood-based panels - Characteristic values for structural design - Part 3: Solid-wood panels; German version EN 12369-3:2008 (Foreign Standard)
DIN EN 12369-2:2004
Wood-based panels - Characteristic values for structural design - Part 2: Plywood (FOREIGN STANDARD)
DIN EN 12369-1:2001
Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboard and fibreboard; English version of DIN EN 12369-1 (FOREIGN STANDARD)
DIN EN 1218-5 Berichtigung 1:2007
Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or fed by chain; German version EN 1218-5:2004, Corrigenda to DIN EN 1218-5:2004-12; German ver (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 1218-5:2004
Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or fed by chain (FOREIGN STANDARD)
DIN EN 1218-4 Berichtigung 1:2007
Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s); German version EN 1218-4:2004, Corrigenda to DIN EN 1218-4:2004-12; German version EN 1218-4:2004/AC:2006 (FOREIGN STANDARD)
DIN EN 1218-4:2004
Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s) (FOREIGN STANDARD)
DIN EN 1218-4/A1:2006
Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s); German version EN 1218-4:2004/A1:2005 (FOREIGN STANDARD)
DIN EN 1218-3:2002
Safety of woodworking machines - Tenoning machines - Part 3: Hand-fed tenoning machines with sliding table for cutting structural timbers; English version of DIN EN 1218-3 (FOREIGN STANDARD)
DIN EN 1218-2 Berichtigung 1:2007
Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains; German version EN 1218-2:2004, Corrigenda to DIN EN 1218-2:2004-11; German version EN 1218-2:2004/AC:2006 (FOREIGN STANDARD)
DIN EN 1218-2:2004
Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains (FOREIGN STANDARD)
DIN EN 1218-1:1999
Safety of wood working machines - Tenoning machines - Part 1: Single-end tenoning machines with sliding table (FOREIGN STANDARD)
DIN EN 12105:1998
Resilient floor coverings - Determination of moisture content of agglomerated composition cork (FOREIGN STANDARD)
DIN EN 12104:2000
Resilient floor coverings - Cork floor tiles - Specification; English version of DIN EN 12104 (FOREIGN STANDARD)
DIN EN 12103:1999
Resilient floor coverings - Agglomerated cork underlays - Specification (FOREIGN STANDARD)
DIN EN 120:1992
Wood-based panels; determination of formaldehyde content; extraction method called perforator method (FOREIGN STANDARD)
DIN EN 1194:1999
Timber structures - Glued laminated timber - Strength classes and determination of characteristic values (FOREIGN STANDARD)
DIN EN 1128:1995
Cemend-bonded particleboard - Determination of hard body impact resistance (FOREIGN STANDARD)
DIN EN 1087-1:1995
Particleboard - Determination of moisture resistance - Boil test (FOREIGN STANDARD)
DIN EN 1072:1995
Plywood - Description of bending properties of structural plywood (FOREIGN STANDARD)
DIN EN 1058:1996
Wood-based panel products - Determination of characteristic values of mechanical properties and density (FOREIGN STANDARD)
DIN 8809:1975
Circular Saw Blades of Tool Steel for Woodworking (FOREIGN STANDARD)
DIN 68762:1982
Chipboard for special purposes in building construction; concepts, requirements, testing (FOREIGN STANDARD)
DIN 68140-1:1998
Finger joints in wood - Finger-jointed structural timber (softwood) (FOREIGN STANDARD)
DIN 68140:1971
Wood Finger-jointing (FOREIGN STANDARD)
DIN 52367:2002
Determining the shear strength of particleboard parallel to the plane (FOREIGN STANDARD)
DIN 52189-1:1981
Testing of wood; Impact bending test; Determination of impact bending strength (FOREIGN STANDARD)
DIN 5134-4:1975
Saw Blades for Woodworking; Technical Conditions of Delivery for Circular Saw Blades of Tool Steel (FOREIGN STANDARD)
DIN 5134-1:1975
Saw Blades for Woodworking; Technical Conditions of Delivery for Bandsaw Blades (FOREIGN STANDARD)
DIN 4074-2:1958
Building Timber for Wood Building Components; Quality Conditions for Building Logs (Softwood) (FOREIGN STANDARD)


Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm

No comments:

Post a Comment