2009/09/07

Cheapest & Latest BSI Standard (PDF) (51)

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm


BS ISO 9711-2:1990 BS ISO 9711-2:1990. Freight containers. Information related to containers on board vessels. Telex data transmission
BS ISO 9711-1:1990 BS ISO 9711-1:1990. Freight containers. Information related to containers on board vessels. Bay plan system
BS ISO TR 10233:1989 BS ISO TR 10233:1989. General purpose flat pallets for through transit of goods. Performance requirements
BS ISO 8323:1985 BS ISO 8323:1985. Freight containers. Air/surface (intermodel) general purpose containers. Specification and tests
DC95/704739 DC95/704739. Tyres, valves and tubes. List of equivalent terms. Part 1. Tyres (ISO/DIS 3877-1)
DC95/704740 DC95/704740. Tyres, valves and tubes. List of equivalent terms. Part 2. Tyre valves (ISO/DIS 3877-2)
DC95/102478 DC95/102478. BS 6911:Part 4. Specification for earth-moving machinery.Testing earth-moving machinery. Method for the evaluation of engine power output
DC95/704066 DC95/704066. Aerospace series. Heat resisting alloy FE-PA 4901. Solution treated and descaled sheet and strip. a ≤ 3 mm (prEN 2170)
DC95/704067 DC95/704067. Aerospace series. Heat resisting alloy FE-PA 2501 solution and precipitation treated forgings De ≤ 100 mm (prEN 2177)
DC95/704068 DC95/704068. Aerospace series. Heat resisting alloy FE-PA 2501 solution and precipitation treated bars and sections a or D ≤ 200 mm (prEN 2178)
DC95/704069 DC95/704069. Aerospace series. Heat resisting alloy FE-PA 4901 solution and precipitation treated bars and sections a or D ≤ 100 mm (prEN 2237)
BS EN ISO 2060:1995 BS EN ISO 2060:1995. Textiles. Yarn from packages. Determination of linear density (mass per unit length) by the skein method
BS EN 726-4:1995 BS EN 726-4:1995. Identification card systems. Telecommunications. Integrated circuit(s) cards and terminals. Application independent card related terminal requirements
BS ISO/IEC 9973:1994 BS ISO/IEC 9973:1994. Information technology. Computer graphics and image processing. Procedures for registration of graphical items
BS ISO/IEC 9805-1:1994 BS ISO/IEC 9805-1:1994. Information technology. Open systems interconnection. Protocol for the commitment, concurrency and recovery service element. Protocol specification
BS ISO/IEC 9804:1994 BS ISO/IEC 9804:1994. Information technology. Open systems interconnection. Service definition for the commitment, concurrency and recovery service element
BS ISO/IEC 9798-2:1994 BS ISO/IEC 9798-2:1994. Information technology. Security techniques. Entity authentication mechanisms. Mechanisms using symmetric encipherment algorithms
BS EN 993-6:1995, BS 1902-4.4:1995 BS EN 993-6:1995, BS 1902-4.4:1995. Methods of test for dense shaped refractory products. Determination of modulus of rupture at ambient temperature
BS EN 993-4:1995, BS 1902-3.9:1995 BS EN 993-4:1995, BS 1902-3.9:1995. Methods of test for dense shaped refractory products. Determination of permeability to gases
BS EN 993-1:1995, BS 1902-3.8:1995 BS EN 993-1:1995, BS 1902-3.8:1995. Methods of test for dense shaped refractory products. Determination of bulk density, apparent porosity and true porosity
BS G 253:1995, ISO 8668-3:1994 BS G 253:1995, ISO 8668-3:1994. Specification for type 1 terminal junction systems
PD 7002:1995 PD 7002:1995. Essential requirements for connection of terminal equipment to analogue interfaces of public switched telecommunications networks using either the earth calling, the loop calling, disconnect clearing, the loop calling, guarded clearing or the loop calling, unguarded clearing signalling method
BS 5989-1:1995, ISO 104:1994 BS 5989-1:1995, ISO 104:1994. Rolling bearings: metric thrust bearings. Specification for dimensions of thrust bearings
BS 7509:1995, IEC 61307:1994 BS 7509:1995, IEC 61307:1994. Industrial microwave heating installations. Test methods for determination of power output
BS EN 126:1995 BS EN 126:1995. Multifunctional controls for gas burning appliances
BS ISO 8371:1994 BS ISO 8371:1994. Iron ores. Determination of decrepitation index
BS ISO 2597-1:1994 BS ISO 2597-1:1994. Iron ores.Determination of total iron content. Titrimetric method after tin (II) chloride reduction
BS M 84:1995, ISO 10327:1995 BS M 84:1995, ISO 10327:1995. Air cargo equipment. Certified aircraft container for air cargo. Specification and testing
BS EN ISO 6509:1995 BS EN ISO 6509:1995. Corrosion of metals and alloys. Determination of dezincification resistance of brass
BS ISO 3619:1994 BS ISO 3619:1994. Photography. Processing chemicals. Specification for ammonium thiosulfate solution
BS ISO 6850:1994 BS ISO 6850:1994. Photography. Processing wastes. Determination of nitrate by a spectrometric method using brucine
BS EN 10215:1995 BS EN 10215:1995. Continuously hot-dip aluminium-zinc (AZ) coated steel strip and sheet. Technical delivery conditions
BS EN 549:1995 BS EN 549:1995. Specification for rubber materials for seals and diaphragms for gas appliances and gas equipment
BS 7652-2:1995, ISO 11040-2:1994 BS 7652-2:1995, ISO 11040-2:1994. Prefilled syringes. Specification for plungers and discs for dental local anaesthetic cartridges
BS 5620:1995 BS 5620:1995. Specification for 200 A 1100 V flameproof restrained and bolted plugs and sockets for use in coal mines
DC95/102083 DC95/102083. prEN 1857 Chimneys. Specification for concrete flue liners
DC94/713296 DC94/713296. Revision of BS 1692:1971 (1984) Specification for gin blocks
DC95/560754 DC95/560754. Dentistry. Preclinical evaluation of biocompatibility of medical devices used in dentistry. Test methods (ISO/DIS 7405)
DC95/703971 DC95/703971. prEN 1829. High pressure cleaners. High pressure water jet machines. Safety requirements. Machines
BS 4656-38:1995 BS 4656-38:1995. Accuracy of machine tools and methods of test. Specification for surface finish of test pieces
PD 6578:1995 PD 6578:1995. Guide to British, European and international graphical symbols, for use on equipment, for safety and fire safety, and for public information, in relation to ISO 7000 and IEC 60417
BS EN 10214:1995 BS EN 10214:1995. Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet. Technical delivery conditions
BS EN ISO 1462:1995 BS EN ISO 1462:1995. Metallic coatings. Coatings other than those anodic to the basis metal. Accelerated corrosion tests. Method for the evaluation of results
BS EN ISO 1460:1995 BS EN ISO 1460:1995. Metallic coatings. Hot dip galvanized coatings on ferrous materials. Gravimetric determination of the mass per unit area
DD ENV 1071-5:1995 DD ENV 1071-5:1995. Advanced technical ceramics. Methods of test for ceramic coatings. Determination of porosity
DD ENV 1159-3:1995 DD ENV 1159-3:1995. Advanced technical ceramics. Ceramic composites. Thermophysical properties. Determination of specific heat capacity
BS ISO/IEC 8823-1:1994 BS ISO/IEC 8823-1:1994. Information technology. Open systems interconnection. Connection-orientated presentation protocol. Connection-oriented presentation protocol. Protocol specification
BS ISO/IEC TR 10000-2:1994 BS ISO/IEC TR 10000-2:1994. Information technology. Framework and taxonomy of international standardized profiles. Principles and taxonomy for OSI profiles
BS EN 61173:1995, IEC 61173:1992 BS EN 61173:1995, IEC 61173:1992. Overvoltage protection for photovoltaic (PV) power generating systems. Guide
BS EN 60512-1:1995, IEC 60512-1:1994 BS EN 60512-1:1995, IEC 60512-1:1994. Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. General
BS ISO/IEC 10731:1994 BS ISO/IEC 10731:1994. Information technology. Open systems interconnection. Basic reference model. Conventions for the definition of OSI services
BS AU 258:1995 BS AU 258:1995. Specification for elasticated straps
BS EN 726-1:1995 BS EN 726-1:1995. Identification card systems. Telecommunications. Integrated circuit(s) cards and terminals. System overview
BS ISO/IEC 8613-1:1994 BS ISO/IEC 8613-1:1994. Information processing. Text and office systems. Office document architecture (ODA) and interchange format. Introduction and general principles
BS ISO/IEC 8613-4:1994 BS ISO/IEC 8613-4:1994. Information processing. Text and office systems. Office document architecture (ODA) and interchange format. Information technology. Open document architecture (ODA) and interchange format. Document profile
BS ISO/IEC 8613-7:1994 BS ISO/IEC 8613-7:1994. Information processing. Text and office systems. Office document architecture (ODA) and interchange format. Information technology. Open Document Architecture (ODA) and Interchange Format. Raster graphics content architectures
BS ISO/IEC 8613-6:1994 BS ISO/IEC 8613-6:1994. Information processing. Text and office systems. Office document architecture (ODA) and interchange format. Information technology. Open document architecture (ODA) and interchange format. Character content architectures
BS ISO/IEC 8613-8:1994 BS ISO/IEC 8613-8:1994. Information processing. Text and office systems. Office document architecture (ODA) and interchange format. Geometric graphics content architectures
BS ISO/IEC 8613-5:1994 BS ISO/IEC 8613-5:1994. Information processing. Text and office systems. Office document architecture (ODA) and interchange format. Information technology. Open document architecture (ODA) and interchange format. Open document interchange format
BS ISO/IEC TR 8802-1:1994 BS ISO/IEC TR 8802-1:1994. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements. Overview of local area network standards
DD ENV 1285:1995 DD ENV 1285:1995. Information processing. Techniques for using SGML. Application for European standards
BS ISO/IEC 13714:1995 BS ISO/IEC 13714:1995. Information technology. Document processing and related communication. User interface to telephone-based services. Voice messaging applications
BS EN ISO/IEC 7487-1:1995 BS EN ISO/IEC 7487-1:1995. Information technology. Data interchange on 130mm (5,25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, 1,9 tpmm (48 tpi), on both sides. ISO type 202. Dimensional, physical and magnetic characteristics
BS EN 61267:1995, IEC 61267:1994 BS EN 61267:1995, IEC 61267:1994. Radiation conditions for use in the determination of characteristics for medical diagnostic X-ray equipment
BS 4515:1995 BS 4515:1995. Specification for welding of steel pipelines on land and offshore
BS 1016-112:1995, ISO 5074:1994 BS 1016-112:1995, ISO 5074:1994. Methods for analysis and testing of coal and coke. Determination of Hardgrove grindability index of hard coal
BS 4359-4:1995 BS 4359-4:1995. Determination of the specific surface area of powders. Recommendations for methods of determination of metal surface area using gas adsorption techniques
BS 6068-2.47:1995, ISO 11083:1994 BS 6068-2.47:1995, ISO 11083:1994. Water quality. Physical, chemical and biochemical methods. Determination of chromium (VI). Spectrometric method using 1,5-diphenylcarbazide
BS 6107-2:1995, ISO 492:1994 BS 6107-2:1995, ISO 492:1994. Rolling bearings: tolerances. Specification for tolerances of radial bearings
BS EN 542:1995 BS EN 542:1995. Adhesives. Determination of density
BS ISO 4246:1994 BS ISO 4246:1994. Cinematography. Vocabulary
BS C 22:1995, ISO 9475:1994 BS C 22:1995, ISO 9475:1994. Test methods for aircraft inner tube and tubeless tyre valves. Cores and caps
BS EN 186110:1995 BS EN 186110:1995. Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type FC
BS EN 186100:1995 BS EN 186100:1995. Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Types F-SMA
BS ISO 3621:1994 BS ISO 3621:1994. Photography. Processing chemicals. Specifications for sodium tetraborate decahydrate
BS ISO/IEC 2382-27:1994 BS ISO/IEC 2382-27:1994. Information technology. Vocabulary. Office automation
DC95/121477 DC95/121477. Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics. Part 2. Melt-calendered extruded sheets (ISO/DIS 7823-2)
DC95/121340 DC95/121340. prEN 1852-5. Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP). Part 5. Fitness for purpose of the system
DC95/121339 DC95/121339. prEN 1852-3. Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP). Part 3. Fittings
DC95/121338 DC95/121338. prEN 1852-2. Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP). Part 2. Pipes (Draft BS EN 1852-2)
DC95/121582 DC95/121582. Fibre reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area (Revision ISO 10352)
DC95/121580 DC95/121580. Reinforcements. Woven fabrics. Determination of number of yarns per unit length of warp and weft (Revision of ISO 4602)
DC95/120903 DC95/120903. BS 3900. Part G9. Methods of test for paints. Part G9. Determination of water vapour transmission rate by the dish method for free films (ISO/DIS 7783-1)
DC95/202978 DC95/202978. IEC 730-2-18. Automatic electrical controls for household and similar use. Part 2. Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements (72/303/CDV)
DC95/540680 DC95/540680. Photography. Projection in indoor rooms. Part 1: Screen illumination test for still and motion picture projectors (ISO 11315-1)
DC95/540679 DC95/540679. Photography. Projection in indoor rooms. Part 2. Screen luminance test for still and video projection (ISO 11315-2)
DC95/641408 DC95/641408. ISO/IEC 9592-4/AMD 2. Information processing systems. Computer graphics. Programmer's hierarchical interactive graphics system (PHIGS). Part 4: Plus lumière und surfaces, PHIGS PLUS. Amendment 2: Enhanced control (ISO/IEC 9592-4/DAM 2)
DC95/703740 DC95/703740. prEN 1861. Refrigerating systems and heat pumps. Symbols for system flow diagrams and for piping and instrument diagrams
BS EN ISO 1924-2:1995 BS EN ISO 1924-2:1995. Paper and board. Determination of tensile properties. Constant rate of elongation method
BS 7808:1995, IEC 61251:1993 BS 7808:1995, IEC 61251:1993. Electrical insulating materials. A.C. voltage endurance evaluation. Introduction
PD 6519-1:1995, IEC 60479-1:1994 PD 6519-1:1995, IEC 60479-1:1994. Guide to effects of current on human beings and livestock. General aspects
BS ISO 11093-9:1994 BS ISO 11093-9:1994. Paper and board. Testing of cores. Determination of flat crush resistance
BS ISO 11093-5:1994 BS ISO 11093-5:1994. Paper and board. Testing of cores. Determination of characteristics of concentric rotation
BS ISO 11093-3:1994 BS ISO 11093-3:1994. Paper and board. Testing of cores. Determination of moisture content using the oven drying method
BS ISO 11093-2:1994 BS ISO 11093-2:1994. Paper and board. Testing of cores. Co-ordinating of test samples
BS ISO 11093-1:1994 BS ISO 11093-1:1994. Paper and board. Testing of cores. Sampling
BS ISO 10836:1994 BS ISO 10836:1994. Iron ores. Method of sampling and sample preparation for physical testing
BS ISO 9211-2:1994 BS ISO 9211-2:1994. Optics and optical instruments. Optical coatings. Optical properties
BS ISO 9211-1:1994 BS ISO 9211-1:1994. Optics and optical instruments. Optical coatings. Definitions
BS ISO 5725-4:1994 BS ISO 5725-4:1994. Accuracy (trueness and precision) of measurement methods and results. Basic methods for the determination of the trueness of a standard measurement method
BS ISO 4330:1994 BS ISO 4330:1994. Photography. Determination of the curl of photographic film and paper
BS ISO 3623:1994 BS ISO 3623:1994. Photography. Processing chemicals. Specifications for anhydrous potassium carbonate
BS ISO 3618:1994 BS ISO 3618:1994. Photography. Processing chemicals. Specifications for benzotriazole
BS ISO 3617:1994 BS ISO 3617:1994. Photography. Processing chemicals. Specifications for sodium hydroxide
BS EN 1465:1995 BS EN 1465:1995. Adhesives. Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
BS EN 671-1:1995 BS EN 671-1:1995. Fixed fire fighting systems. Hose systems. Hose reels with semi-rigid hose
BS EN 203-2:1995 BS EN 203-2:1995. Specification for gas heated catering equipment. Rational use of energy
BS 7803:1995, IEC 61211:1994 BS 7803:1995, IEC 61211:1994. Guide to insulators of ceramic material or glass for overhead-lines with a nominal voltage greater then 1000 V, puncture testing
BS 7510:1995, IEC 61308:1994 BS 7510:1995, IEC 61308:1994. High-frequency dielectric heating installations. Test methods for the determination of power output
BS 3868:1995 BS 3868:1995. Specification for prefabricated drainage stack units in galvanized steel
BS ISO/IEC 12087-3:1995 BS ISO/IEC 12087-3:1995. Information technology. Computer graphics and image processing. Image processing and interchange (IPI). Functional specification. Image interchange facility (IIF)
BS ISO/IEC TR 11802-1:1995 BS ISO/IEC TR 11802-1:1995. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Technical reports and guidelines. The structure and coding of Logical Link Control addresses in Local Area Networks
BS ISO/IEC TR 11802-2:1995 BS ISO/IEC TR 11802-2:1995. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Technical reports and guidelines. Standard Group MAC Addresses
BS EN ISO 7263:1995 BS EN ISO 7263:1995. Corrugating medium. Determination of the flat crush resistance after laboratory fluting
BS ISO/IEC 8802-2:1994 BS ISO/IEC 8802-2:1994. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements. Logical link control
BS ISO/IEC 10021-5:1994 BS ISO/IEC 10021-5:1994. Information technology. Message handling systems (MHS). Message store: abstract service definition
BS ISO/IEC 9638-3:1994 BS ISO/IEC 9638-3:1994. Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Language bindings. Ada
BS ISO/IEC 13210:1994 BS ISO/IEC 13210:1994. Information technology. Test methods for measuring conformance to POSIX
BS ISO/IEC 10967-1:1994 BS ISO/IEC 10967-1:1994. Information technology. Language independent arithmetic. Integer and floating point arithmetic
BS EN 61086-3-1:1995, IEC 61086-3-1:1995 BS EN 61086-3-1:1995, IEC 61086-3-1:1995. Specification for loaded printed wire boards (conformal coatings). Coatings for loaded printed wire boards (conformal coatings). Part 3. Specifications for individual materials. Coatings for general purpose (class I) and for high reliability (class II)
BS EN 61210:1995 BS EN 61210:1995. Connecting devices. Flat quick-connect terminations for electrical copper conductors. Safety requirements
BS 6893-3.300:1995, IEC 60684-3-300:1987 BS 6893-3.300:1995, IEC 60684-3-300:1987. Flexible insulating sleeving for electrical purposes. Specification for requirements for individual types of sleeving. Glass textile fibre sleeving, braided, uncoated
BS 6893-3.209:1995, IEC 60684-3-209:1987 BS 6893-3.209:1995, IEC 60684-3-209:1987. Flexible insulating sleeving for electrical purposes. Specification for requirements for individual types of sleeving. General purpose heat-shrinkable sleeving, flame retarded polyolefin shrink ratio 2:1
BS 7815:1995, IEC 61087:1991 BS 7815:1995, IEC 61087:1991. Guide for evaluating the discharges from a charged surface
BS CECC 210000:1995 BS CECC 210000:1995. Harmonized system of quality assessment for electronic components. Requirements for technology approval schedules (TAS)
BS 7820-1:1995, ISO 10727:1995 BS 7820-1:1995, ISO 10727:1995. Analysis of tea and tea products. Tea and instant tea. Determination of caffeine content
BS ISO 10716:1994 BS ISO 10716:1994. Paper and board. Determination of alkali reserve
BS 6712-1:1995, ISO 8226-1:1994 BS 6712-1:1995, ISO 8226-1:1994. Measurement of hygroexpansivity of paper and board. Method for the measurement of hygroexpansivity up to a maximum relative humidity of 68%
BS EN 743:1995, BS 2782-11:Methods 1102A & B BS EN 743:1995, BS 2782-11:Methods 1102A & B. Plastics piping and ducting systems. Thermoplastics pipes. Determination of the longitudinal reversion
BS 5293-11:1995, ISO 4652-1:1994 BS 5293-11:1995, ISO 4652-1:1994. Sampling and testing carbon black for use in the rubber industry. Method for determination of specific surface area by nitrogen adsorption methods using single-point procedures
BS 6127-1:1995, ISO 7404-1:1994 BS 6127-1:1995, ISO 7404-1:1994. Petrographic analysis of bituminous coal and anthracite. Glossary of terms relating to the petrographic analysis of bituminuous coal and anthracite
BS 6127-3:1995, ISO 7404-3:1994 BS 6127-3:1995, ISO 7404-3:1994. Petrographic analysis of bituminous coal and anthracite. Method of determining maceral group composition of bituminous coal and anthracite
BS 6127-5:1995, ISO 7404-5:1994 BS 6127-5:1995, ISO 7404-5:1994. Petrographic analysis of bituminous coal and anthracite. Method of determining microscopically the reflectance of vitrinite
BS EN 485-2:1995 BS EN 485-2:1995. Aluminium and aluminium alloys. Sheet, strip and plate. Mechanical properties
BS EN 543:1995 BS EN 543:1995. Adhesives. Determination of apparent density of powder and granule adhesives
BS EN 827:1995 BS EN 827:1995. Adhesives. Determination of conventional solids content and constant mass solids content
BS EN 924:1995 BS EN 924:1995. Adhesives. Solvent-borne and solvent-free adhesives. Determination of flashpoint
BS EN 1464:1995 BS EN 1464:1995. Adhesives. Determination of peel resistance of high-strength adhesive bonds. Floating roller method
BS EN 2079:1995 BS EN 2079:1995. Bearings, precision ball with flange in corrosion resisting steel, for instruments and equipment. Dimensions and loads
BS EN 60891:1995 BS EN 60891:1995. Procedures for temperature and irradiance corrections to measured I-V characteristics of crystalline silicon photovoltaic devices
BS EN 168100:1995 BS EN 168100:1995. Harmonized system of quality assessment for electronic components. Sectional specification: quartz crystal units (capability approval)
BS EN ISO 3952-1:1995 BS EN ISO 3952-1:1995. Kinematic diagrams. Graphical symbols. Part 1
BS EN ISO 3952-2:1995 BS EN ISO 3952-2:1995. Kinematic diagrams. Graphical symbols. Part 2
BS EN ISO 3952-3:1995 BS EN ISO 3952-3:1995. Kinematic diagrams. Graphical symbols. Part 3
BS EN 761:1995, BS 2782-12:Method 1214D:1995 BS EN 761:1995, BS 2782-12:Method 1214D:1995. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the creep factor under dry conditions
BS EN 584-1:1995 BS EN 584-1:1995. Non-destructive testing. Industrial radiographic film. Classification of film systems for industrial radiography
BS EN 462-4:1995 BS EN 462-4:1995. Non-destructive testing. Image quality of radiographs. Experimental evaluation of image quality values and image quality tables
BS 5763-16:1995, ISO 10273:1994 BS 5763-16:1995, ISO 10273:1994. Methods for microbiological examination of food and animal feeding stuffs. Detection of presumptive pathogenic Yersinia enterocolitica
BS EN 803:1995, BS 2782-11:Method 1123J:1995 BS EN 803:1995, BS 2782-11:Method 1123J:1995. Plastics piping systems. Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping. Test method for resistance to a short-term internal pressure without end thrust
BS EN 802:1995, BS 2782-11:Method 1114F:1995 BS EN 802:1995, BS 2782-11:Method 1114F:1995. Plastics piping and ducting systems. Injection-moulded thermoplastics fittings for pressure piping systems. Test method for maximum deformation by crushing
DC95/703132 DC95/703132. Aerospace series. Rivets, solid, 100 countersunk normal head, in titanium T1-P02, anodized, metric series. (prEN 3423)
DC95/703131 DC95/703131. Aerospace series. Rivets, universal head, in titanium TI-P02, anodized, metric series. (prEN 3422)
DC95/703089 DC95/703089. Aerospace series. Space data and information transfer systems. Telecommand. Data routing service (ISO/DIS 12172)
DC95/202784 DC95/202784. EN 50049-1/prAG. Domestic and similar electronic equipment interconnection requirements:peritelevision requirements. Specification of sound levels of NICAM and D2 MAC and residual value of energy dispersal signal for satellite reception in PAL or SECAM systems
DC95/520599 DC95/520599. BS 7755 Soil Quality. Part 4. Biological methods. New Section. Determination of soil microbial B10 mass. Respiration method. (ISO/DIS 14240-1)
DC95/121352 DC95/121352. Fibre reinforced plastics. Thermosetting moulding compounds and prepregs. Determination of cure characteristics (ISO/DIS 12114)
DC95/121351 DC95/121351. Fibre reinforced plastics. Thermosetting moulding compounds and prepegs. Determination of flowability, maturation and shelf life (ISO/DIS 12115)
DC95/120801 DC95/120801. prEN 1815. Resilient floor coverings. Assessment of static electrical propensity
DC95/202510 DC95/202510. IEC Publication 1663-1. Protection of telecommunication line against lightning. Part 1. Fibre optic installations. Fibre optic installations
BS 7087-1:1995 BS 7087-1:1995. Herbs and spices ready for food use. Specification for black and white pepper (whole and ground)
BS 7087-2:1995 BS 7087-2:1995. Herbs and spices ready for food use. Specification for dried thyme (whole and ground)
BS EN 61010-2-032:1995, IEC 61010-2-032:1994 BS EN 61010-2-032:1995, IEC 61010-2-032:1994. Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for hand-held current clamps for electrical measurement and test
BS EN 60068-2-65:1995, IEC 60068-2-65:1993 BS EN 60068-2-65:1995, IEC 60068-2-65:1993. Environmental testing. Test methods. Test Fg. Vibration, acoustically induced
BS EN 60454-2:1995, IEC 60454-2:1994 BS EN 60454-2:1995, IEC 60454-2:1994. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Methods of test
BS 8220-2:1995 BS 8220-2:1995. Guide for security of buildings against crime. Offices and shops
BS F 142:1995 BS F 142:1995. Specification for hydrolysis resistant, thermoplastic polyether polyurethane elastomer-coated nylon fabric for aerospace purposes
BS EN 60068-2-66:1995, IEC 60068-2-66:1994 BS EN 60068-2-66:1995, IEC 60068-2-66:1994. Environmental testing. Test methods. Test Cx. Damp heat, steady state (unsaturated pressurized vapour)
BS EN 60704-2-1:1995 BS EN 60704-2-1:1995. Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Vacuum cleaners
BS EN 50083-6:1995 BS EN 50083-6:1995. Cabled distribution systems for television and sound signals. Optical equipment
BS EN 50083-4:1995 BS EN 50083-4:1995. Cabled distribution systems for television and sound signals. Passive coaxial wideband distribution equipment
BS EN 50083-3:1995 BS EN 50083-3:1995. Cabled distribution systems for television and sound signals. Active coaxial wideband distribution equipment
BS EN 929:1995 BS EN 929:1995. Inland navigation vessels. Push-tows. Mounting attachment for demountable signal masts
BS EN 702:1995 BS EN 702:1995. Protective clothing. Protection against heat and flame. Test method. Determination of the contact heat transmission through protective clothing or its materials
BS EN 526:1995 BS EN 526:1995. Inland navigation vessels. Gangways with a length not exceeding 8 m. Requirements, types
BS 7804-1:1995, ISO 9884-1:1994 BS 7804-1:1995, ISO 9884-1:1994. Tea sacks. Specification for a reference sack for palletized and containerized transport of tea
BS EN 608:1995 BS EN 608:1995. Agricultural and forestry machinery. Portable chain saws. Safety
BS EN ISO 9693:1995 BS EN ISO 9693:1995. Specification for dental ceramic fused to metal restorative materials
BS EN 30993-6:1995, ISO 10993-6:1994 BS EN 30993-6:1995, ISO 10993-6:1994. Biological evaluation of medical devices. Tests for local effects after implantation
BS EN 60645-1:1995, IEC 60645-1:1992 BS EN 60645-1:1995, IEC 60645-1:1992. Audiometers. Pure-tone audiometers
BS ISO/IEC 6522:1992 BS ISO/IEC 6522:1992. Information technology. Programming languages. PL/I general purpose subset
BS ISO/IEC 11730:1994 BS ISO/IEC 11730:1994. Information technology. Programming languages. Form interface management system (FIMS)
DD 219-1:1995 DD 219-1:1995. Electronic funds transfer at point of sale (EFT- POS). Conceptual framework. Guide to roles, entities and relationships
BS 493:1995 BS 493:1995. Specification for airbricks and gratings for wall ventilation
BS 6068-2.48:1995, ISO 10359-2:1994 BS 6068-2.48:1995, ISO 10359-2:1994. Water quality. Physical, chemical and biochemical methods. Determination of inorganically bound total fluoride after digestion and distillation
DC95/540500 DC95/540500. Pallets for material handling. Performance requirements (ISO/CD 8611-2). Performance requirements
DC95/540499 DC95/540499. Pallets for materials handling. Design rating and maximum working load (ISO/CD 8611-3). Design rating and maximum working load
DC95/702115 DC95/702115. Aerospace series. Circuit breakers. Test methods. General. (prEN 3841-100)
DC95/702116 DC95/702116. Aerospace series. Circuit breakers. Test methods. Visual inspection. (prEN 3841-201)
DC95/702118 DC95/702118. Aerospace series. Circuit breakers. Electrical test methods. Voltage drop. (prEN 3841-301)
DC95/702117 DC95/702117. Aerospace series. Circuit breakers. Test methods. Dimensions and masses. (prEN 3841-202)
DC95/702122 DC95/702122. Aerospace series. Circuit breakers. Electrical test methods. Short circuit performance. (prEN 3841-305)
DC95/702123 DC95/702123. Aerospace series. Circuit breakers. Electrical test methods. Service life tests (endurance) (prEN 3841-306)
DC95/702124 DC95/702124. Aerospace series. Circuit breakers. Electrical test methods. Performance with tripping system blocked. (prEN3841-307)
DC95/702125 DC95/702125. Aerospace series. Circuit breakers. Electrical test methods. Lightning test. (prEN 3841-308)
DC95/702126 DC95/702126. Aerospace series. Circuit breakers. Environmental test methods. Sand and dust. (prEN 3841-401)
DC95/120956 DC95/120956. prEN 1796-4 Plastics piping systems for water supply with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP). Part 4. Ancillary equipment
DC95/702127 DC95/702127. Aerospace series. Circuit breakers. Environmental test methods. Corrosion test (prEN 3841-402)
DC95/702128 DC95/702128. Aerospace series. Circuit breakers. Environmental test methods. Humidity test (prEN 3841-403)
DC95/702129 DC95/702129. Aerospace series. Circuit breakers. Environmental test methods. Explosion proof (prEN 3841-404)
DC95/702130 DC95/702130. Aerospace series. Circuit breakers. Fluid resistance (prEN 3841-405)
DC95/702131 DC95/702131. Aerospace series. Circuit breakers. Environmental test methods. Flammability. (prEN 3841-406)
DC95/702132 DC95/702132. Aerospace series. Circuit breakers. Mechanical test methods. Actuator button travel. (prEN 3841-501)
DC95/702133 DC95/702133. Aerospace series. Circuit breakers. Mechanical test methods. Operating force. (prEN 3841-502)
DC95/702134 DC95/702134. Aerospace series. Circuit breakers. Mechanical test methods. Strength of actuating components. (prEN 3841-503)
DC95/702135 DC95/702135. Aerospace series. Circuit breakers. Mechanical test methods. Strength of mounting. (prEN 3841-504)
DC95/702136 DC95/702136. Aerospace series. Circuit breakers. Mechanical test methods. Strength of main terminals. (prEN 3841-505)
DC95/702137 DC95/702137. Aerospace series. Circuit breakers. Mechanical test methods. Vibration performance. (prEN 3841-506)
DC95/702138 DC95/702138. Aerospace series. Circuit breakers. Mechanical test methods. Mechanical shock. (prEN 3841-507)
DC95/702139 DC95/702139. Aerospace series. Circuit breakers. Mechanical test methods. Centrifugal acceleration. (prEN 3841-508)
DC95/702140 DC95/702140. Aerospace series. Circuit breakers. Mechanical test methods. Insertion and extraction of signal contact terminals. (prEN 3841-509)
DC95/120955 DC95/120955. prEN 1796-6. Plastics piping systems for water supply with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP). Part 6. Recommended practice for installation. Part 6 : Recommended practice for installation
DC95/120954 DC95/120954. prEN 1796-5. Plastics piping systems for water supply with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP). Part 5. Fitness for the purpose of the system. Part 5 : Fitness for purpose of the system
DC95/500432 DC95/500432. Storage of cereals and pulses. Part 1. Guide to particular problems encountered in the storage of cereals and pulses (Revision of BS 6279:Part 1:1982) (ISO/DIS 6322-1)
DC95/120953 DC95/120953. prEN 1796-3. Plastics piping systems for water supply with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP). Part 3. Fittings. Part 3 : Fittings
DC95/120952 DC95/120952. prEN 1796-2. Plastics piping systems for water supply with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP). Part 2. Pipes with flexible, reduced articulation or rigid joints. Part 2 : Pipes with flexible, reduced articulation or rigid joints
DC95/500435 DC95/500435. BS 5545. Milking machine installations. Part 3. Methods for mechanical testing (revision of BS 5545:Part 3:1988) (ISO/DIS 6690)
DC95/500436 DC95/500436. BS 5545. Milking machine installations. Part 2. Specification for construction performance (revision of BS 5545:Part 2:1988) (ISO/DIS 5707)
DC95/500434 DC95/500434. BS 5545. Milking machine installations. Part 1. Glossary of terms (revision of BS 5545: Part 1:1988) (ISO/DIS 3918)
DC95/120958 DC95/120958. ISO/DIS 13955. Plastics pipes and fittings. Crushing decohesion test for polyethylene electrofusion assemblies [draft BS 2782:Part 11:Method 1151C]
BS EN 804:1995, BS 2782-11:Method 1123K:1995 BS EN 804:1995, BS 2782-11:Method 1123K:1995. Plastics piping systems. Injection-moulded socket fittings for solvent-cemented joints for pressure piping. Test method for resistance to a short-term internal hydrostatic pressure
BS EN 560:1995 BS EN 560:1995. Gas welding equipment. Hose connections for welding, cutting and allied processes
BS ISO 12206:1995 BS ISO 12206:1995. Photography. Methods for the evaluation of the effectiveness of chemical conversion of silver images against oxidation
BS ISO 3029:1995 BS ISO 3029:1995. Photography. 126 size cartridges. Dimensions of cartridge, film and backing paper
BS ISO 10602:1995 BS ISO 10602:1995. Photography. Processed silver-gelatin type black-and-white film. Specifications for stability
BS EN 441-2:1995 BS EN 441-2:1995. Refrigerated display cabinets. General mechanical and physical requirements
BS EN 763:1995, BS 2782-11:Methods 1103A & B BS EN 763:1995, BS 2782-11:Methods 1103A & B. Plastics piping and ducting systems. Injection-moulded thermoplastics fittings. Test method for visually assessing effects of heating
QMH 100:1995 QMH 100:1995. Quality management handbook. Part 1: Quality assurance, Part 2: Reliability and maintainability
BS EN ISO 9312:1995 BS EN ISO 9312:1995. Resistance welding equipment. Insulated pins for use in electrode back-ups
BS 5646:Part 4:1995, ISO 113:1994 BS 5646:Part 4:1995, ISO 113:1994. Rolling bearings. Accessories. Specification for plummer block housings
BS AU 50-4.1.1:1995, ISO 4000-2:1994 BS AU 50-4.1.1:1995, ISO 4000-2:1994. Tyres and wheels. Rim profiles and dimensions. Car rims. Specification for metric series rims
BS AU 50-4.2.1:1995, ISO 4209-2:1993 BS AU 50-4.2.1:1995, ISO 4209-2:1993. Tyres and wheels. Rim profiles and dimensions. Commercial vehicle rims. Specification for metric series rims
BS 5939:1995, ISO 5527:1995 BS 5939:1995, ISO 5527:1995. Glossary of terms for cereals and cereal products
BS 5760-15:1995, IEC 61165:1995 BS 5760-15:1995, IEC 61165:1995. Reliability of systems, equipment and components. Guide to the application of Markov techniques
BS EN 60645-3:1995, IEC 60645-3:1994 BS EN 60645-3:1995, IEC 60645-3:1994. Audiometers. Auditory test signals of short duration for audiometric and neuro-otological purposes
BS EN 61203:1995, IEC 61203:1992 BS EN 61203:1995, IEC 61203:1992. Synthetic organic esters for electrical purposes. Guide for maintenance of transformer esters in equipment
BS EN 60704-3:1995, IEC 60704-3:1992 BS EN 60704-3:1995, IEC 60704-3:1992. Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances. Procedure for determining and verifying declared noise emission values
BS EN 61285:1995, IEC 61285:1994 BS EN 61285:1995, IEC 61285:1994. Industrial-process control. Safety of analyser houses
BS 6897-5:1995, ISO 7626-5:1994 BS 6897-5:1995, ISO 7626-5:1994. Experimental determination of mechanical mobility. Measurement using impact excitation with an exciter which is not attached to the structure
BS EN 441-9:1995 BS EN 441-9:1995. Refrigerated display cabinets. Electrical energy consumption test
BS 1000[621.8]:1995 BS 1000[621.8]:1995. Universal Decimal Classification. English full edition. Machine elements. Motive power engineering. Materials handling. Fixings. Lubrication
BS 3215:1995 BS 3215:1995. Specification for reusable portable urinals
BS EN 60601-2-21:1995, BS 5724-2.121:1995,IEC 60601-2-21:1994 BS EN 60601-2-21:1995, BS 5724-2.121:1995,IEC 60601-2-21:1994. Medical electrical equipment. Particular requirements for safety. Specification for infant radiant warmers
BS EN 570:1995 BS EN 570:1995. Aluminium and aluminium alloys. Impact extrusion slugs obtained from wrought products. Specifications
BS EN 545:1995 BS EN 545:1995. Ductile iron pipes, fittings, accessories and their joints for water pipelines. Requirements and test methods
BS EN 181101:1995 BS EN 181101:1995. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fibre optic branching devices. Type: non wavelength selective transmissive star
BS EN 60601-2-27:1995, BS 5724-2.127:1995,IEC 60601-2-27:1994 BS EN 60601-2-27:1995, BS 5724-2.127:1995,IEC 60601-2-27:1994. Medical electrical equipment. Particular requirements for safety. Specification for electrocardiographic monitoring equipment
BS EN 60601-2-26:1995, BS 5724-2.126:1995,IEC 60601-2-26:1994 BS EN 60601-2-26:1995, BS 5724-2.126:1995,IEC 60601-2-26:1994. Medical electrical equipment. Particular requirements for safety. Specification for electroencephalographs
BS EN ISO 7287:1995 BS EN ISO 7287:1995. Graphical symbols for thermal cutting equipment
BS EN 181102:1995 BS EN 181102:1995. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fibre optic branching devices. Type: wavelength selective transmission star
BS AU 50-4.5.1:1995 BS AU 50-4.5.1:1995. Tyres and wheels. Rim profiles and dimensions. Industrial vehicle rims. Specification for rim profiles and dimensions for code-designated series tyres
BS M 82:1995, ISO 4170:1995 BS M 82:1995, ISO 4170:1995. Air cargo equipment. Interline pallet nets
BS M 83:1995, ISO 10254:1995 BS M 83:1995, ISO 10254:1995. Glossary for air cargo and ground equipment
BS EN ISO 11213:1995 BS EN ISO 11213:1995. Modified starch. Determination of acetyl content. Enzymatic method
BS EN 1014-1:1995 BS EN 1014-1:1995. Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis. Procedure for sampling creosote
BS EN 920:1995 BS EN 920:1995. Paper and board intended to come into contact with foodstuffs. Determination of water soluble matter
BS EN 441-7:1995 BS EN 441-7:1995. Refrigerated display cabinets. Defrosting test
BS EN 441-3:1995 BS EN 441-3:1995. Refrigerated display cabinets. Linear dimensions, areas and volumes
BS 3F 114:1995 BS 3F 114:1995. Specification for 80 g/m2 cotton madapolam fabric
BS 3F 116:1995 BS 3F 116:1995. Specification for mercerized cotton fabric
Fire Tests Fire Tests. Fire tests: buildings, products and materials
Readimetric Converter Readimetric Converter.
Conversion Chart for Height and Weight Conversion Chart for Height and Weight.
BS EN ISO 1567:1995 BS EN ISO 1567:1995. Dentistry. Denture base polymers
DC95/121249 DC95/121249. ISO/DIS 12092. Fittings, valves and other piping system components of unplasticized poly(vinyl chloride) (PVC-U) for pipes under pressure. Resistance to internal pressure. Test method
DC95/120950 DC95/120950. ISO/DIS 13480. Polyethylene pipes. Resistance to slow crack growth. Cone test method (BS 2782:Part 11:Method 1109C)
DC95/540524 DC95/540524. Cinematography. Room and surround for evaluating television display from telecine reproduction
DC95/121252 DC95/121252. ISO/DIS 4437. Plastics pipes and fittings. Buried polyethylene (PE) pipes for the supply of gaseous fuels. Metric series. Specifications
DC95/120957 DC95/120957. ISO/DIS 13957. Plastics pipes and fittings. Polyethylene tapping tees. Determination of impact resistance
BS ISO/IEC 8473-1:1994 BS ISO/IEC 8473-1:1994. Information technology. Protocol for providing the connectionless-mode network service. Protocol specification
BS EN 921:1995, BS 2782-11:Method 1127A:1995. BS EN 921:1995, BS 2782-11:Method 1127A:1995.. Plastics piping systems. Thermoplastics pipes. Determination of resistance to internal pressure at constant temperature
BS EN 60634:1995 BS EN 60634:1995. Heat test source (H.T.S.) lamps for carrying out heating tests on luminaires
BS EN 60704-2-6:1995, IEC 60704-2-6:1994 BS EN 60704-2-6:1995, IEC 60704-2-6:1994. Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances. Particular requirements. Tumble-dryers
BS EN 61119-5:1995, IEC 61119-5:1993 BS EN 61119-5:1995, IEC 61119-5:1993. Digital audio tape cassette system (DAT). DAT for professional use
BS EN 60143-2:1995, IEC 60143-2:1994 BS EN 60143-2:1995, IEC 60143-2:1994. Series capacitors for power systems. Protective equipment for series capacitor banks
BS EN ISO 3677:1995 BS EN ISO 3677:1995. Filler metal for soft soldering, brazing and braze welding. Designation
BS ISO/IEC 10165-6:1994 BS ISO/IEC 10165-6:1994. Information technology. Open systems interconnection. Structure of management information. Information technology. Open systems Interconnection. Structure of management information:Requirements and guidelines for implementation conformance statement proformas associated with OSI management
BS ISO/IEC 10164-12:1994 BS ISO/IEC 10164-12:1994. Information technology. Open systems interconnection. Systems management. Test management function
BS ISO/IEC 8211:1994 BS ISO/IEC 8211:1994. Information technology. Specification for a data descriptive file for information interchange
DC95/560469 DC95/560469. Poly-L-Lactide resins and fabricated forms for surgical implants in vitro degradation testing (ISO/DIS 13781)
DC95/121153 DC95/121153. Determination of cadmium in plastics with the method of wet decomposition (prEN 1122)
BS ISO 10093:1994 BS ISO 10093:1994. Plastics. Fire tests. Standard ignition sources
DC95/640959 DC95/640959. ISO/IEC 9592-1/AMD 3. Information processing systems. Computer graphics. Programmer's hierarchical interactive graphics system (PHIGS). Part 1. Functional description. Amendment 3. Enhanced control (ISO/IEC 9592-1/DAM 3)
DC95/120896 DC95/120896. BS EN 1862. Biotechnology. Large scale process and production. Control procedures for raw materials
DC95/121172 DC95/121172. BS EN 866-2. Biological systems for testing sterilizers. Part 2. Particular systems for use in ethylene oxide sterilizers (prEN 866-2)
DC95/500393 DC95/500393. BS 4401. Methods of test for meat and meat products. Part 10. Determination of total phosphorus content. Spectrometric method (ISO/DIS 13730)
DC95/560518 DC95/560518. Revision of BS 5724. Medical electrical equipment. Part 2. Particular requirements for safety. Section 2.27. Specification for oxygen monitors for monitoring patient breathing mixtures (ISO/DIS 7767)
DC95/560491 DC95/560491. BS EN 1820 specification for anaesthetic reservoir bags (Revision of BS 3353:1987) (prEN 1820)
DC95/560490 DC95/560490. BS EN 1819 specification for laryngoscopes for tracheal intubation (Revision of BS 6578:Part 1:1985 and Part 2:1985) (prEN 1819)
DC95/201633 DC95/201633. prEN 837-2. Pressure gauges. Part 2. Selection and installation recommendations for pressure gauges
DC95/701644 DC95/701644. Steel and steel products. Location of samples and test pieces for mechanical testing (ISO/DIS 377)
DC95/701666 DC95/701666. Aerospace series. Metallic materials. Rules for the drafting and presentation of technical specifications (prEN 4260)
DC95/702038 DC95/702038. Transportable gas cylinders. prEN 1800. Acetylene cylinders basic requirements and definitions
DC95/702037 DC95/702037. Transportable gas cylinders. prEN 1801. Filling conditions for single acetylene cylinders (including list of licensed porous masses)
DC95/500357 DC95/500357. Respiratory protective devices. Half masks without inhalation valves to protect against gases and particles or particles only. Requirements, testing, marking (prEN 1827)
DC95/540471 DC95/540471. Cinematography. Care and preservation of magnetic audio recordings for motion-pictures and television
DC95/520582 DC95/520582. BS 6068. Water quality. Part 2. Physical, chemical and biochemical methods. New section. Determination of dissolved anions by liquid chromatography of ions. Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate
DC95/560351 DC95/560351. BS EN. Non-active surgical implants. General requirements (prEN ISO/DIS 14630)
DC95/201554 DC95/201554. prEN 50123-6:1995. Railway applications. Fixed installations. DC switchgear. Part 6. DC switchgear assemblies
DC95/201553 DC95/201553. prEN 50121-5:1995. Railway applications. Electromagnetic compatibility. Part 5. Standard for emission and immunity of railway fixed power supply installations (possible new British Standard)
BS EN 413-2:1995 BS EN 413-2:1995. Masonry cement. Test methods
BS ISO 2580-1:1990 BS ISO 2580-1:1990. Plastics. Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials. Designation
BS ISO 6805:1994 BS ISO 6805:1994. Rubber hoses and hose assemblies for underground mining. Wire-reinforced hydraulic types for coal mining. Specification
BS ISO 2897-1:1990 BS ISO 2897-1:1990. Plastics. Impact-resistant polystyrene (PS-I) moulding and extrusion materials. Designation
BS EN 441-6:1995 BS EN 441-6:1995. Refrigerated display cabinets. Classification according to temperature
BS EN 441-10:1995 BS EN 441-10:1995. Refrigerated display cabinets. Test for absence of odour and taste
BS EN 499:1995 BS EN 499:1995. Welding consumables. Covered electrodes for manual metal arc welding of non alloy and fine grain steels. Classification
BS ISO 2240:1994 BS ISO 2240:1994. Photography. Colour reversal camera films. Determination of ISO speed
BS 8103-4:1995 BS 8103-4:1995. Structural design of low-rise buildings. Code of practice for suspended concrete floors for housing
BS ISO/IEC 10118-1:1994 BS ISO/IEC 10118-1:1994. Information technology.Security techniques.Hash-functions. General
BS ISO 7004:1987 BS ISO 7004:1987. Photography. Industrial radiographic film. Determination of ISO speed and average gradient when exposed to X- and γ-radiation
BS ISO 5799:1991 BS ISO 5799:1991. Photography. Direct-exposing medical and dental radiographic film/process systems. Determination of ISO speed and ISO average gradient
BS ISO/IEC 12119:1994 BS ISO/IEC 12119:1994. Information technology. Software packages. Quality requirements and testing
WD/HB10036 : 1995 WD/HB10036 : 1995. Implementing ISO 9000
BS 6333:1995, ISO 6787:1982 BS 6333:1995, ISO 6787:1982. Specification for adjustable wrenches
BS EN ISO 9013:1995 BS EN ISO 9013:1995. Welding and allied processes. Quality classification and dimensional tolerances of thermally cut (oxygen/fuel gas flame) surfaces
DD ENV 50142:1995 DD ENV 50142:1995. Electromagnetic compatibility. Basic immunity standard. Surge immunity tests
BS M 78:1995, ISO 11078:1994 BS M 78:1995, ISO 11078:1994. Aircraft de-icing/anti-icing non-Newtonian fluids, ISO type II
BS EN 60704-2-5:1995 BS EN 60704-2-5:1995. Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances. Room heaters of the storage type
BS EN 60255-6:1995 BS EN 60255-6:1995. Electrical relays. Measuring relays and protection equipment
BS EN 22553:1995 BS EN 22553:1995. Welded, brazed and soldered joints. Symbolic representation on drawings
BS EN 25184:1995 BS EN 25184:1995. Straight resistance spot welding electrodes
BS EN 60704-2-2:1995, IEC 60704-2-2:1985 BS EN 60704-2-2:1995, IEC 60704-2-2:1985. Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances. Particular requirements. Forced draught convection heaters
BS EN 61255:1995, IEC 61255:1994 BS EN 61255:1995, IEC 61255:1994. Household electric heating pads. Methods for measuring performance
BS EN 60068-1:1995, IEC 60068-1:1988 BS EN 60068-1:1995, IEC 60068-1:1988. Environmental testing. General and guidance
BS EN 60704-1:1995 BS EN 60704-1:1995. Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. General requirements
BS 7813:1995, ISO 4124:1994 BS 7813:1995, ISO 4124:1994. Guide for statistical control of dynamic liquid hydrocarbon volumetric metering systems
BS 7812:1995, ISO 4266:1994 BS 7812:1995, ISO 4266:1994. Guide for selection, specification, installation, operation and maintenance of automatic liquid level and temperature measuring instruments on petroleum storage tanks
BS 227:1995 BS 227:1995. Specification for H-section steel arches for use in mines
BS EN 228:1995 BS EN 228:1995. Specification for unleaded petrol (gasoline) for motor vehicles
BS 6399:Part 2:1995 BS 6399:Part 2:1995. Loading for buildings. Code of practice for wind loads
BS ISO/IEC 10742:1994 BS ISO/IEC 10742:1994. Information technology. Telecommunications and information exchange between systems. Elements of management information related to OSI data link layer standards
BS ISO 5418-1:1994 BS ISO 5418-1:1994. Iron ores. Determination of copper content. 2,2'-Biquinolyl spectrophotometric method
BS ISO/IEC 11572:1994 BS ISO/IEC 11572:1994. Information technology. Telecommunications and information exchange between systems. Private Integrated Services Network. Circuit mode bearer services. Inter-exchange signalling procedures and protocol
BS ISO 2596:1994 BS ISO 2596:1994. Iron ores. Determination of hygroscopic moisture in analytical samples. Gravimetric and Karl Fischer methods
BS EN 61262-6:1995, IEC 61262-6:1994 BS EN 61262-6:1995, IEC 61262-6:1994. Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment. Determination of the contrast ratio and veiling glare index
BS ISO/IEC 10118-2:1994 BS ISO/IEC 10118-2:1994. Information technology.Security techniques.Hash-functions. Hash-functions using an N-bit block cipher algorithm
DC95/402068 DC95/402068. General requirements for bodies operating assessment and certification/registration of quality [prEN 45012 (revision)]
DC95/120773 DC95/120773. Graphic technology. Specification for colour and transparency of printing ink sets. Part 1. Sheet-fed and heat web offset lithography printing (ISO/DIS 2846-1)
DC95/560365 DC95/560365. Implants for surgery. Metallic materials. Part 4. Cobalt-chromium-molybdenum casting alloy (ISO/DIS 5832-4)(Revision of draft British Standard BS 7252:Part 4)
BS EN 61262-3:1995, IEC 61262-3:1994 BS EN 61262-3:1995, IEC 61262-3:1994. Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment. Determination of the luminance distribution and luminance non-uniformity
BS 7252-11:1995, ISO 5832-11:1994 BS 7252-11:1995, ISO 5832-11:1994. Metallic materials for surgical implants. Specification for wrought titanium 6-aluminium 7-niobium alloy
BS 7275-3:1995, ISO 4392-3:1993 BS 7275-3:1995, ISO 4392-3:1993. Determination of hydraulic fluid power motor characteristics. Method at constant flow and at constant torque
BS 7530-2:1995 BS 7530-2:1995. Methods for froth flotation testing of hard coal. Evaluation of flotation characteristics
DD ENV 459-1:1995 DD ENV 459-1:1995. Building lime. Definitions, specifications and conformity criteria
BS EN 459-2:1995 BS EN 459-2:1995. Building lime. Test methods
BS EN 530:1995 BS EN 530:1995. Abrasion resistance of protective clothing material. Test methods
BS EN 724:1995 BS EN 724:1995. Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for non-active medical devices
BS EN 60601-1-3:1995, BS 5724-1.3:1995,IEC 60601-1-3:1994 BS EN 60601-1-3:1995, BS 5724-1.3:1995,IEC 60601-1-3:1994. Medical electrical equipment. General requirements for safety. Collateral standard. General requirements for radiation protection in diagnostic X-ray equipment
BS EN 61262-5:1995, IEC 61262-5:1994 BS EN 61262-5:1995, IEC 61262-5:1994. Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment. Determination of the detective quantum efficiency
BS EN 61262-2:1995, IEC 61262-2:1994 BS EN 61262-2:1995, IEC 61262-2:1994. Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment. Determination of the conversion factor
BS EN 61262-1:1995, IEC 61262-1:1994 BS EN 61262-1:1995, IEC 61262-1:1994. Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment. Determination of the entrance field size
DC95/402067 DC95/402067. General requirements for assessment and accreditation of certification/registration bodies [prEN 45010]
DC95/120766 DC95/120766. Graphic technology. Determination of rheological properties of paste inks and vehicles by the falling rod viscometer (ISO/DIS 12644)
DC95/120767 DC95/120767. Graphic technology. Process control for the manufacture of half-tone colour separations, proof and production prints (ISO/DIS 12647-2)
DC95/201482 DC95/201482. Amendment to IEC 1662. Assessment of the risk of damage due to lighting. International document 81/67/CDV.
BS EN ISO 9969:1995, BS 2782-11:Method 1114B:1995 BS EN ISO 9969:1995, BS 2782-11:Method 1114B:1995. Thermoplastics pipes. Determination of ring stiffness
BS EN ISO 9967:1995, BS 2782-11:Method 1114A:1995 BS EN ISO 9967:1995, BS 2782-11:Method 1114A:1995. Thermoplastics pipes. Determination of creep ratio
BS EN 637:1995, BS 2782-12:Method 1205A:1995 BS EN 637:1995, BS 2782-12:Method 1205A:1995. Plastics piping systems. Glass-reinforced plastics components. Determination of the amounts of constituents using the gravimetric method
BS EN 441-11:1995 BS EN 441-11:1995. Refrigerated display cabinets. Installation, maintenance and user's guide
BS ISO/IEC 10737:1994 BS ISO/IEC 10737:1994. Information technology. Telecommunications and information exchange between systems. Elements of management information related to OSI transport layer standards
BS ISO/IEC 10747:1994 BS ISO/IEC 10747:1994. Information technology. Telecommunications and information exchange between systems. Protocol for exchange of inter-domain routeing information among intermediate systems to support forwarding of ISO 8473 PDUs
BS ISO/IEC 13422:1994 BS ISO/IEC 13422:1994. Information technology. Data interchange on 90 mm flexible disk cartridges 10 MByte capacity using sector servo tracking. ISO type 304
BS EN 448:1995 BS EN 448:1995. Preinsulated bonded pipe systems for underground hot water networks. Fittings assemblies of steel service pipes, polyurethane thermal insulation and outer casing of high density polyethylene
BS ISO 4698:1994 BS ISO 4698:1994. Iron ore pellets. Determination of relative free-swelling index
BS ISO 7992:1992 BS ISO 7992:1992. Iron ores. Determination of reduction properties under load
BS 7087-23:1995 BS 7087-23:1995. Herbs and spices ready for food use. Specification for dried caraway seeds (whole and ground)
BS 7087-22:1995 BS 7087-22:1995. Herbs and spices ready for food use. Specification for dried mustard seeds (whole and ground)
BS 7087-21:1995 BS 7087-21:1995. Herbs and spices ready for food use. Specification for bay leaves (whole and ground)
BS EN ISO 3785:1995 BS EN ISO 3785:1995. Steel. Designation of test piece axes
BS EN ISO 7384:1995 BS EN ISO 7384:1995. Corrosion tests in artificial atmospheres. General requirements
BS 7755-3.6:1995, ISO 11263:1994 BS 7755-3.6:1995, ISO 11263:1994. Soil quality. Chemical methods. Determination of phosphorus. Spectrometric determination of phosphorus soluble in sodium hydrogen carbonate solution
BS 6068-5.17:1995, ISO 10229:1994 BS 6068-5.17:1995, ISO 10229:1994. Water quality. Biological methods. Determination of the prolonged toxicity of substances to freshwater fish. Method for evaluating the effects of substances on the growth rate of rainbow trout [Oncorhynchus mykiss Walbaum (Teleostei, Salmonidae)]
BS ISO 7348:1992 BS ISO 7348:1992. Glass containers. Manufacture. Vocabulary
BS ISO 8611:1991 BS ISO 8611:1991. General-purpose flat pallets for through transit of goods. Test methods
BS ISO 417:1993 BS ISO 417:1993. Photography. Determination of residual thiosulfate and other related chemicals in processed photographic materials. Methods using iodine-amylose, methylene blue and silver sulfide
BS ISO 418:1994 BS ISO 418:1994. Photography. Processing chemicals. Specifications for anhydrous sodium sulfite
BS ISO 423:1994 BS ISO 423:1994. Photography. Processing chemicals. Specification for hydroquinone
BS ISO/IEC 2022:1994 BS ISO/IEC 2022:1994. Information technology. Character code structure and extension techniques
BS ISO 3299:1994 BS ISO 3299:1994. Photography. Processing chemicals. Specifications for 1-phenyl-3-pyrazolidinone
BS ISO 422:1994 BS ISO 422:1994. Photography. Processing chemicals. Specifications for p-methylaminophenol sulfate
BS ISO 3627:1994 BS ISO 3627:1994. Photography. Processing chemicals. Specifications for anhydrous sodium metabisulfite
BS ISO 11313:1994 BS ISO 11313:1994. Photography. Disposable cassettes containing photocomposition film and paper. Dimensions and related requirements
BS EN 253:1995 BS EN 253:1995. Preinsulated bonded pipe systems for underground hot water networks. Pipe assembly of steel service pipes, polyurethane thermal insulation and outer casing of high density polyethylene
BS ISO 10636:1994 BS ISO 10636:1994. Photography. Processing chemicals. Specification for anhydrous sodium thiosulfate and sodium thiosulfate pentahydrate
BS ISO/IEC 11430:1995 BS ISO/IEC 11430:1995. Information technology. Programming languages. Generic package of elementary functions for ADA
BS EN 440:1995 BS EN 440:1995. Welding consumables. Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification
BS EN ISO 105-D01:1995, ISO 105-D01:1993 BS EN ISO 105-D01:1995, ISO 105-D01:1993. Textiles. Tests for colour fastness. Colour fastness to dry cleaning
BS EN ISO 4543:1995 BS EN ISO 4543:1995. Metallic and other non-organic coatings. General rules for corrosion tests applicable for storage conditions
DC95/200825 DC95/200825. Ceramic and glass insulating materials. Part 3. Specifications for individual materials (15C/510/CDV) (revision of IEC 672-3)
DC95/520507 DC95/520507. BS ISO 14060 'Guide for the inclustion of environmental aspects in product standards'
DC95/120402 DC95/120402. BS 3900:Part E17. Methods of test for paints. Determination of resistance to abrasion. Rotating rubber wheel method (ISO/DIS 7784-2)
DC95/120403 DC95/120403. BS 3900:Part E18. Methods of test for paints. Determination of resistance to abrasion. Reciprocating test panel method (ISO 7784-3)
BS EN ISO 105-P01:1995, ISO 105-P01:1993 BS EN ISO 105-P01:1995, ISO 105-P01:1993. Textiles. Tests for colour fastness. Colour fastness to dry heat (excluding pressing)
BS ISO 6:1993 BS ISO 6:1993. Photography. Black-and-white pictorial still camera negative film/process systems. Determination of ISO speed
BS EN 843-1:1995 BS EN 843-1:1995. Advanced technical ceramics. Monolithic ceramics. Mechanical properties at room temperature. Determination of flexural strength
BS 7508:1995, ISO 11342:1994 BS 7508:1995, ISO 11342:1994. Mechanical vibration. Methods and criteria for the mechanical balancing of flexible rotors
BS 7519:1995, ISO 3719:1994 BS 7519:1995, ISO 3719:1994. Mechanical vibration. Symbols for balancing and associated instrumentation
BS EN 196-2:1995 BS EN 196-2:1995. Methods of testing cement. Chemical analysis of cement
BS EN 196-1:1995 BS EN 196-1:1995. Methods of testing cement. Determination of strength
BS ISO 10844:1994 BS ISO 10844:1994. Acoustics. Specification of test tracks for the purpose of measuring noise emitted by road vehicles
BS EN 196-3:1995 BS EN 196-3:1995. Methods of testing cement. Determination of setting time and soundness
BS EN 196-5:1995 BS EN 196-5:1995. Methods of testing cement. Pozzolanicity test for pozzolanic cements
BS 7500:1995 BS 7500:1995. Specification for marking of recycled paper board
BS 903-1:1995 BS 903-1:1995. Physical testing of rubber. Guide to the selection and use of methods of test for rubber
BS 4727-3:Group 08:1995, IEC 60050-801:1994 BS 4727-3:Group 08:1995, IEC 60050-801:1994. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to telecommunications and electronics. Acoustics and electroacoustics
DC95/701796 DC95/701796. Cavitation pitting evaluation in pelton turbines (impulse turbines) (Draft supplement IEC 609 (1978)/SUP 1)
DC95/120628 DC95/120628. Rubber. Determination of metal content by atomic absorption spectrometry. Part 3. Determination of copper content (ISO/DIS 6101-3)
BS ISO 11431:1993 BS ISO 11431:1993. Building construction. Sealants. Determination of adhesion/cohesion properties after exposure to artificial light through glass
BS ISO 11600:1993 BS ISO 11600:1993. Building construction. Sealants. Classification and requirements
BS EN 441-4:1995 BS EN 441-4:1995. Refrigerated display cabinets. General test conditions
BS EN 441-8:1995 BS EN 441-8:1995. Refrigerated display cabinets. Water vapour condensation test
BS AU 223a:1995 BS AU 223a:1995. Specification for vehicle support stands for cars and light vans
BS 7801:1995 BS 7801:1995. Code of practice for safe working on escalators and passenger conveyors in use
BS 7795:1995 BS 7795:1995. Specification for bolts, screws and studs with a pre-applied micro-encapsulated chemical adhesive feature incorporated into the thread
DC95/640634 DC95/640634. ISO/IEC IS 11770-2. Information technology. Security techniques. Key management. Part 2. Mechanisms using symmetric techniques (ISO/IEC DIS 11770-2)
DC95/201003 DC95/201003. CISPR 12, 4th Edition. Limits and methods of measurement of radio disturbance characteristics of vehicles, motorboats and spark-ignited engine-drive devices CIS/D/119/CD (possible new British Standard)
DC95/700260 DC95/700260. prEN 1268-1. Safety devices for the protection against excessive pressure. Part 1. Safety valves. (draft new European standard)
DC95/701764 DC95/701764. Road vehicles. Ignition systems. Part 1. Vocabulary {revision of first edition (ISO 6518-1:1980)] (ISO/DIS 6518-1)
DC95/701765 DC95/701765. Road vehicles. Spark-plugs. Terminals (ISO/DIS 14508)
DC95/100461 DC95/100461. prEN ISO 10472-3. Safety requirements for industrial laundry machinery. Part 3: Washing tunnellines including component machines (ISO/DIS 10472-3:1994)
DC95/100457 DC95/100457. prEN ISO 10472-5. Safety requirements for industrial laundry machinery. Part 5: Flatwork ironers, feeders and folders (ISO/DIS 10472-5:1994)
BS 7000-10:1995 BS 7000-10:1995. Design management systems. Glossary of terms used in design management
BS 6404-8.9:1995, IEC 60404-8-9:1994 BS 6404-8.9:1995, IEC 60404-8-9:1994. Magnetic materials. Individual materials. Standard specification for sintered soft magnetic materials
BS 6004:1995 BS 6004:1995. Specification for PVC-insulated cables (non-armoured) for electric power and lighting
BS EN ISO 9391:1995, BS 6068-5.15:1995 BS EN ISO 9391:1995, BS 6068-5.15:1995. Water quality. Sampling in deep water for macro-invertebrates. Guidance on the use of colonization, qualitative and quantitative samplers
BS EN ISO 6941:1995, ISO 6941:1984 BS EN ISO 6941:1995, ISO 6941:1984. Textile fabrics. Burning behaviour. Measurement of flame spread properties of vertically oriented specimens
BS EN ISO 6940:1995 BS EN ISO 6940:1995. Textile fabrics. Burning behaviour. Determination of ease of ignition of vertically oriented specimens
BS ISO 12048:1994 BS ISO 12048:1994. Packaging. Complete, filled transport packages. Compression and stacking tests using a compression tester
BS M 81:1995, ISO 6968:1994 BS M 81:1995, ISO 6968:1994. Air cargo equipment. Wide body aircraft lower deck container/pallet loader. Functional requirements
BS 7504:1995, ISO 6164:1994 BS 7504:1995, ISO 6164:1994. Hydraulic fluid power. Four-screw, one-piece square flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar)
BS EN 132401:1995 BS EN 132401:1995. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed capacitors for electromagnetic interference suppression and connection to supply mains. Assessment level D
DC95/700055 DC95/700055. Diesel engines. End-mounting flanges for fuel injection pumps (ISO/DIS 7299)
DC95/700031 DC95/700031. Safety of machinery. Pressure sensitive protective devices. Part 1. General principles for the design and testing of pressure sensing mats and pressure sensing floors (prEN 1760-1)
DC94/110608 DC94/110608. BS 3900. Part E14. Methods of test for paints. Determination of mar resistance using a curved stylus (ISO/DIS 12137-1)
DC94/110609 DC94/110609. BS 3900. Part E15. Methods of test for paints. Determination of mar resistance using a pointed scratch stylus (ISO/DIS 12137-2)
DC94/508363 DC94/508363. Medical devices for dentistry. Instruments (identical with prEN 1639)
DC94/216784 DC94/216784. Guidance on the development of lists of maximum allowable temperatures for polymeric compounds under normal operating conditions (15B/158/CD)
DC94/508350 DC94/508350. Intraocular lenses. Part 4. Specification for labelling and information. (ISO/DIS 11979:Part 4). Part 4: Labelling and information
DC94/508456 DC94/508456. Mesh type eye and face protectors for industrial and non-industrial use against mechanical hazards and/or heat. (prEN 1731)
DC95/120231 DC95/120231. BS 3156 Analysis of fuel gases. Part 11. Methods for non-manufactured gases. Section 11.1. Hydrocarbons and inert gases. Subsection 11.1.X. Guide for traceability in analysis of natural gas. (ISO/DIS 14111) (a new British Standard)
DC95/700308 DC95/700308. Aluminium and aluminium alloys. Foil. Part 4. Special property requirements (prEN 546-4)
DC94/216814 DC94/216814. IEC 819-2. Specification for non-cellulosic papers for electrical purposes. Part 2. Methods of test. (15C(Secretariat)334) Part 3. Specification for individual materials. Sheets 4 to 7 (15C(Secretariat)308). Methods of test
DC95/560036 DC95/560036. BS EN 1782. Tracheal tubes and connectors. (Revision of BS 3487:Part 1:1989, Part 2:1993, Part 3:1986 and Part 5:1986, and of BS 6546:1984
DC95/200267 DC95/200267. Vented nickel-cadmium rechargeable single cells (prEN 60623:1994) [possible new British standard]
DC95/120334 DC95/120334. (BS 7164:Section 30.1). Rubber. Determination of metal content by atomic absorption spectrometry. Part 4. Determination of manganese content (ISO/DIS 6101-4)
DC95/120333 DC95/120333. (BS 7164:Section 26.1). Rubber. Determination of metal content by atomic absorption spectrometry. Part 2. Determination of lead content (ISO/DIS 6101-2)
DC95/700128 DC95/700128. Woodruff keyseat cutters. Dimensions. (ISO/DIS 12197)
DC95/700507 DC95/700507. Cranes. Graphical symbols. Part 2. Mobile cranes (ISO/DIS 7296-2)
DC95/700508 DC95/700508. Cranes. General principles for safety signs and hazard pictorials (ISO/DIS 13200)
DC95/700810 DC95/700810. Zinc and zinc alloys. Alloys for foundry purposes. Ingot and liquid (prEN 1774)
DC94/111112 DC94/111112. Classification of the quality designation of natural gas. (ISO/DIS 13686) (A new British Standard)
DC94/109919 DC94/109919. Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Part 3. Design considerations. (ISO/DIS 12944-3)
DC94/508378 DC94/508378. Evaluation and routine testing in medical imaging departments. Part 3-2. Acceptance tests. Imaging performance of mammographic X-Ray equipment. (BS 7725 Section 3.2, 62B(Secretariat)219)
DC95/700788 DC95/700788. Magnesium and magnesium alloys. Magnesium and magnesium alloy anodes, ingots and castings. Designation system (prEN 1754)
DC95/700787 DC95/700787. Magnesium and magnesium alloys. Magnesium alloys ingots and castings. General (prEN 1753)
DC95/700786 DC95/700786. Aluminium and aluminium alloys. Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castings. Part 3. Writing rules for chemical composition (prEN 1780-3)
DC94/110899 DC94/110899. Adhesives. Tack measurement for pressure sensitive adhesives. Determination of loop tack (prEN 1719)
DC94/110900 DC94/110900. Adhesives. Tack measurement for pressure sensitive adhesives. Determination of rolling ball tack (prEN 1721)
DC94/110901 DC94/110901. Adhesive. Determination of dispersability (prEN 1720)
DC94/216280 DC94/216280. Revision of IEC publication 50(31) (1959) as International Electrotechical Vocabulary Chapter 821. Signalling and security apparatus for railways. Sections 1 to 10 (possible new British standard)
DC94/714926 DC94/714926. Reciprocating internal combustion engines. Measurement of exhaust emission. Part 5. Test fuels.
DC95/120255 DC95/120255. Methods of testing dense shaped refractory products. Part 9. Determination of creep in compression (prEN 993-9)
DC95/560016 DC95/560016. British Standard for sterile single-use double-ended injection needles for dental cartridge syringes (identical with ISO/DIS 7885)
DC95/500047 DC95/500047. Coriander (Coriandrum Sativum L.), whole or ground (powdered). Specification (ISO/DIS 2255)
BS 6548-5:1995, IEC 60706-5:1994 BS 6548-5:1995, IEC 60706-5:1994. Maintainability of equipment. Guide to diagnostic testing
BS EN 572-7:1995 BS EN 572-7:1995. Glass in building. Basic soda lime silicate glass products. Wired or unwired channel shaped glass
BS EN 572-6:1995 BS EN 572-6:1995. Glass in building. Basic soda lime silicate glass products. Wired patterned glass
BS EN 572-5:1995 BS EN 572-5:1995. Glass in building. Basic soda lime silicate glass products. Patterned glass
BS EN 572-4:1995 BS EN 572-4:1995. Glass in building. Basic soda lime silicate glass products. Drawn sheet glass
BS EN 572-3:1995 BS EN 572-3:1995. Glass in building. Basic soda lime silicate glass products. Polished wired glass
BS EN 572-2:1995 BS EN 572-2:1995. Glass in building. Basic soda lime silicate glass products. Float glass
BS EN 572-1:1995 BS EN 572-1:1995. Glass in building. Basic soda lime silicate glass products. Definitions and general physical and mechanical properties
BS 7796:1995, ISO 6162:1994 BS 7796:1995, ISO 6162:1994. Specification for hydraulic fluid power. Four-screw split-flange connections for use at pressures of 2,5 MPa to 40 MPa (25 bar to 400 bar). Type 1 metric series and type 11 inch series
DC95/700130 DC95/700130. Model acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump. Turbines (IEC/CD 4/111/CDV)
DC95/500152 DC95/500152. BS 5202. Methods for chemical analysis of tobacco and tobacco products. New Part. Determination of water content of tobacco. Karl Fisher method (ISO/DIS 6488)
DC95/120566 DC95/120566. Rubber, raw synthetic. Determination of anti-degradants by high-pressure liquid chromatography (HPLC) ISO/DIS 11089
DC95/120577 DC95/120577. Rubber or plastics-coated fabrics. Measurement of gas permeability (ISO/DIS 7229)
DC95/120578 DC95/120578. Rubber or plastics-coated fabrics. Determination of resistance to ozone cracking under static conditions (ISO/DIS 3011)
DC95/700962 DC95/700962. Functional requirements for gas metering systems for natural gas. Design, materials, construction, reliability, calibration, operation and maintenance (prEN 1776)
DC94/110947 DC94/110947. Draft prEN 1739. Determination for shear strength for in-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
DC94/110946 DC94/110946. Draft prEN 1737. Determination of shear strength of welded joints of reinforcement mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
DC94/110945 DC94/110945. Draft prEN 1742. Determination of shear strength between different layers of multilayer components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
DC94/110944 DC94/110944. Draft prEN 1738. Determination of steel stresses in unloaded reinforced components made of autoclaved aerated concrete
DC94/110942 DC94/110942. Draft prEN 1741. Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
DC95/540096 DC95/540096. Cinematography. Image produced by camera aperture type W on 16 mm motion-picture film. Positions and dimensions (ISO/CD 5768)
DC95/520063 DC95/520063. ISO/DIS 7875-1. Water quality. Determination of surfactants. Part 1. Determination of anionic surfactants by measurement of the methylene blue index (MBAS) [Revision of first edition ISO 7875-1:1984]
DC94/715395 DC94/715395. Hacksaw blades. Part 1. Dimensions for hand blades. Part 2. Dimensions for machine blades (ISO/DIS 2336-1 & -2)
DC94/408922 DC94/408922. Sampling plans for audit sampling (ISO/CD 13447)
94/215768DC 94/215768DC. IEC 34. Rotating electrical machines. Part 18. Functional evaluation of insulation systems. Section 34. Test procedures for form-wound windings. Thermomechanical cycle endurance evaluation [Document 2J/41/CD]. Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermomechanical cycle endurance evaluation
DC94/109918 DC94/109918. BS xxxx:Part 2. Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Part 2 Classification of environments (ISO/DIS 12944-2)
DC94/109917 DC94/109917. BS xxxx:Part 1. Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Part 1. General introduction. (ISO/DIS 12944-1)
BS EN 2829:1995 BS EN 2829:1995. Adhesion test for metallic coatings by shot peening
BS 7780:Part 4:1995 BS 7780:Part 4:1995. Specification for rotary shaft lip type seals. Performance test procedures
BS IEC 1008-2-2:1990 BS IEC 1008-2-2:1990. Specification for residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCCBs). Applicability of the general rules to RCCBs functionally dependent on line voltage
BS IEC 1009-2-2:1991 BS IEC 1009-2-2:1991. Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs). Applicablity of the general rules to RCBOs. Applicability of the general rules to RCBOs functionally dependent on line voltage
BS EN 147101:1995 BS EN 147101:1995. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: relay sockets of assessed quality
BS EN 120008:1995 BS EN 120008:1995. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: light emitting diodes and infrared emitting diodes for fibre optic system or sub-system
BS EN 60068-2-63:1995, IEC 60068-2-63:1991 BS EN 60068-2-63:1995, IEC 60068-2-63:1991. Environmental testing. Test methods. Test Eq: Impact, spring hammer
BS EN 690:1995 BS EN 690:1995. Agricultural machinery. Manure spreaders. Safety
BS 7087-20:1995 BS 7087-20:1995. Herbs and spices ready for food use. Specification for dried parsley (cut, rubbed and ground)
BS EN ISO 9455-3:1995 BS EN ISO 9455-3:1995. Soft soldering fluxes. Test methods. Determination of acid value, potentiometric and visual titration methods
BS ISO/IEC 10165-5:1994 BS ISO/IEC 10165-5:1994. Information technology. Open systems interconnection. Structure of management information. Generic management information
BS 6912:Part 15:1995, ISO 2867:1994 BS 6912:Part 15:1995, ISO 2867:1994. Safety of earth-moving machinery. Specification for access systems
BS 2945:1995 BS 2945:1995. Specification for axes and hatchets
BS EN 61086-1:1995, IEC 61086-1:1992 BS EN 61086-1:1995, IEC 61086-1:1992. Specification for loaded printed wire boards (conformal coatings). Definitions, classification and general requirements
BS EN 60454-1:1995, IEC 60454-1:1992 BS EN 60454-1:1995, IEC 60454-1:1992. Specifications for pressure-sensitive adhesive tapes for electrical purposes. General requirements
BS ISO 424:1994 BS ISO 424:1994. Photography. Processing chemicals. Specification for anhydrous sodium carbonate and sodium carbonate monohydrate
BS ISO 3624:1994 BS ISO 3624:1994. Photography. Processing chemicals. Specifications for potassium ferricyanide
BS 1919-2:1995 BS 1919-2:1995. Hacksaw blades. Specification for cutting performance
BS EN ISO 4257:1995 BS EN ISO 4257:1995. Liquefied petroleum gases. Method of sampling
BS 7770:1995 BS 7770:1995. Guide to the preparation of climatic data and its application to building and civil engineering
BS EN 556:1995 BS EN 556:1995. Sterilization of medical devices. Requirements for terminally-sterilized devices to be labelled 'Sterile'
BS EN 140000:1995 BS EN 140000:1995. Harmonized system of quality assessment for electronic components. Generic specification: fixed resistors
BS ISO 420:1994 BS ISO 420:1994. Photography. Processing chemicals. Specifications for potassium bromide
BS ISO TR 13928:1994 BS ISO TR 13928:1994. Application guide for ISO 10755, ISO 10756, ISO 10757, ISO 10758 and ISO 10759
BS ISO/IEC 10739-1:1994 BS ISO/IEC 10739-1:1994. Information technology. Open Systems Interconnection. Test suite structure and test purposes
BS ISO/IEC 12087-2:1994 BS ISO/IEC 12087-2:1994. Information technology. Computer graphics and image processing. Image processing and interchange (IPI). Functional specification. Programmer's imaging kernel system application program interface
94/409229DC 94/409229DC. Optics and optical instruments. Lasers and laser-related equipment. Test method for absorptance of optical laser components (ISO/DIS 11551)
94/507739DC 94/507739DC. General safety requirements and test methods for domestic storage furniture (prEN 1727)
94/714299DC 94/714299DC. Non-destructive examination of welds. Ultrasonic examination. Characterisation of imperfections in welds (prEN 1713)
DC94/507741 DC94/507741. Domestic furniture. Beds and mattresses. Safety requirements and test methods. (prEN 1725)
DC94/506594 DC94/506594. BS EN 1632-3. Cleanroom technology. Biocontamination control. Part 3. Methods of analyzing and measuring biocontamination of surfaces in zones at risk
DC94/506593 DC94/506593. BS EN 1632-1. Cleanroom technology. Biocontamination control. Part 1. Basic principles and determination of critical control points in zones at risk (prEN 1632-1)
BS EN 60601-2-32:1995, BS 5724-2.32:1995,IEC 60601-2-32:1994 BS EN 60601-2-32:1995, BS 5724-2.32:1995,IEC 60601-2-32:1994. Medical electrical equipment. Particular requirements for safety. Specification for associated equipment of X-ray equipment
BS EN 61000-4-1:1995, IEC 61000-4-1:1992 BS EN 61000-4-1:1995, IEC 61000-4-1:1992. Electromagnetic compatibility (EMC). Testing and measurement techniques. Overview of immunity tests. Basic EMC publication
DC94/216448 DC94/216448. IEC 1629-2. Specification for aramid pressboard for electrical purposes. Part 2. Methods of test
DC94/409347 DC94/409347. Draft for packaging. Dimensional coordination. Part 1. Principles (prEN 1732-1)
DC94/109920 DC94/109920. Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Part 4. Types of surface and surface preparation (ISO/DIS 12944-4)
DC94/109921 DC94/109921. Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Part 6. Laboratory performance testing methods (ISO/DIS 12944-6)
BS ISO/IEC 8802-6:1994 BS ISO/IEC 8802-6:1994. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements. Distributed Queue Dual Bus (DQDB) access method and physical layer specifications
DC94/508290 DC94/508290. Medical Electrical Equipment. Section 2.11. Specification for safety requirements for gamma beam therapy equipment (Revision of BS 5724. Section 2.11:1989 and Supplements 1 (1989) and 2 (1993) (IEC/DIS 601-2-11)
94/713477DC 94/713477DC. Aluminium and aluminium alloys. Castings. Chemical composition and mechanical properties (prEN 1706)
DC94/713529 DC94/713529. Structural steel equal and unequal leg angles. Part 1. Dimensions (prEN 10056-1)
BS 6057-3.7:1995, ISO 705:1994 BS 6057-3.7:1995, ISO 705:1994. Rubber latices. Methods of test. Determination of density of natural rubber latices
BS 7518:1995, IEC 61017-2:1994 BS 7518:1995, IEC 61017-2:1994. Radiation protection instrumentation. Portable, transportable or installed equipment to measure x or gamma radiation for environmental monitoring. Integrating assemblies
BS 7404-1.4:1995, IEC 60870-1-4:1994 BS 7404-1.4:1995, IEC 60870-1-4:1994. Telecontrol equipment and systems. General considerations. Guide for basic aspects of telecontrol data transmission and organization of standards BS 7404:Part 5 and BS 7404:Part 6
PD 6575-2:1995, IEC 60865-2:1994 PD 6575-2:1995, IEC 60865-2:1994. Short-circuit currents. Calculation of effects. Examples of calculation
DD ENV 843-4:1995 DD ENV 843-4:1995. Advanced technical ceramics. Monolithic ceramics. Mechanical properties at room temperatures. Vickers, Knoop and Rockwell superficial hardness tests
BS 5750:Part 4:1994 BS 5750:Part 4:1994. Quality systems. Guide to the use of BS EN ISO 9001 'Model for quality assurance in design, development, production, installation and servicing (Formerly BS 5750:Part 1)', BS EN ISO 9002 'Model for quality assurance in production, installation and servicing (Formerly BS 5750:Part 2)' and BS EN ISO 9003 'Model for quality assurance in final inspection and test (Formerly BS 5750:Part 3)'
DC94/506595 DC94/506595. BS EN 1633-1. Cleanroom technology. Particulate contamination. Part 1. Classification of cleanrooms and clean air controlled spaces by airborne particulate content(prEN 1633-1). Classification of airborne particulate cleanliness for clean rooms and clean zones
BS ISO 9358:1994 BS ISO 9358:1994. Optics and optical instruments. Veiling glare of image forming systems. Definitions and methods of measurement
BS ISO 8590:1994 BS ISO 8590:1994. Cinematography. Audio records on 70 mm motion picture release prints with magnetic stripes. Recorded characteristic
BS ISO 25:1994 BS ISO 25:1994. Cinematography. Camera usage of 16 mm motion picture film specification
BS EN ISO 1942-5:1995 BS EN ISO 1942-5:1995. Dental vocabulary. Terms associated with testing
BS EN 61086-2:1995, IEC 61086-2:1992 BS EN 61086-2:1995, IEC 61086-2:1992. Specification for loaded printed wire boards (conformal coatings). Methods of test
BS EN 181000:1995 BS EN 181000:1995. Harmonized system of quality assessment for electronic components. Generic specification. Fibre optic branching devices
BS ISO 9211-3:1994 BS ISO 9211-3:1994. Optics and optical instruments. Optical coatings. Environmental durability
BS ISO 9336-1:1994 BS ISO 9336-1:1994. Optics and optical instruments. Application. Optical transfer function. Interchangeable lenses for 35 mm still cameras
BS ISO 9336-2:1994 BS ISO 9336-2:1994. Optics and optical instruments. Application. Optical transfer function. Lenses for office copiers
BS ISO 9336-3:1994 BS ISO 9336-3:1994. Optics and optical instruments. Application. Optical transfer function. Telescopes
BS ISO 10109-6:1994 BS ISO 10109-6:1994. Optics and optical instruments. Environmental requirements. Test requirements for medical optical devices
BS 7755-3.5:1995, ISO 1464:1994 BS 7755-3.5:1995, ISO 1464:1994. Soil quality. Chemical methods. Pretreatment of samples for physico-chemical analyses
BS 7515:1995, IEC 61263:1994 BS 7515:1995, IEC 61263:1994. Radiation protection instrumentation. Portable potential alpha energy meter for rapid measurements in mines
BS 7507:1995, ISO 10334:1994 BS 7507:1995, ISO 10334:1994. Specification for malleable wires for use as sutures and other surgical applications
BS 5752-14:1995, ISO 11294:1994 BS 5752-14:1995, ISO 11294:1994. Methods of test for coffee and coffee products. Roasted ground coffee. Determination of moisture content (loss in mass at 103°C (routine method)
94/209173DC 94/209173DC. Low mounted way guidance systems. Part 1. Electrical systems
BS 5752-13:1995, ISO 11817:1994 BS 5752-13:1995, ISO 11817:1994. Methods of test for coffee and coffee products. Roasted ground coffee. Determination of moisture content. Karl Fischer method (reference method)
BS ISO 10109-8:1994 BS ISO 10109-8:1994. Optics and optical instruments. Environmental requirements. Test requirements for extreme conditions of use
BS ISO 10109-1:1994 BS ISO 10109-1:1994. Optics and optical instruments. Environmental requirements. General information, definitions, climatic zones and their parameters
BS 7755-4.1.1:1995, ISO 11266:1995 BS 7755-4.1.1:1995, ISO 11266:1995. Soil quality. Biological methods. Biodegradability. Guidance on laboratory testing for biodegradation of organic chemicals in soil under aerobic conditions
DC94/408909 DC94/408909. British Standard guide on statistical process control systems. Part 1. Guideline for implementation of statistical process control (ISO/CD 11462-1)
DC94/109421 DC94/109421. BS EN 1631-1. Cleanroom technology. Basic aspects. Part 1. Terminology (prEN 1631-1)
94/714027DC 94/714027DC. Food processing machinery. Vegetable cutting machines. Safety and hygiene requirements (prEN 1678)
DC94/506731 DC94/506731. BS EN 1659. In vitro diagnostic systems. Culture media for microbiology. Terminology
DC94/506730 DC94/506730. BS EN 1658. In vitro diagnostic systems. Requirements for marking of in vitro diagnostic instruments
BS EN ISO 1886:1995, BS 2782-10:Method 1007:1995 BS EN ISO 1886:1995, BS 2782-10:Method 1007:1995. Reinforcement fibres. Sampling plans applicable to received batches
BS ISO 9022-15:1994 BS ISO 9022-15:1994. Optics and optical instruments. Environmental test methods. Combined random vibration wide band: reproducibility, medium, in dry heat or cold
BS ISO 9022-16:1994 BS ISO 9022-16:1994. Optics and optical instruments. Environmental test methods. Combined bounce or steady-state acceleration, in dry heat or cold
BS ISO 9022-17:1994 BS ISO 9022-17:1994. Optics and optical instruments. Environmental test methods. Combined contamination, solar radiation
BS ISO 9022-18:1994 BS ISO 9022-18:1994. Optics and optical instruments. Environmental test methods. Combined damp heat and low internal pressure
BS ISO 9022-19:1994 BS ISO 9022-19:1994. Optics and optical instruments. Environmental test methods. Temperature cycles combined with sinusoidal or random vibration
PD 7003:1995 PD 7003:1995. Essential requirements for terminal equipment intended for connection to analogue interfaces of the PSTN using direct dialling in
BS EN 61223-2-6:1995, BS 7725-2.6:1995,IEC 61223-2-6:1994 BS EN 61223-2-6:1995, BS 7725-2.6:1995,IEC 61223-2-6:1994. Evaluation and routine testing in medical imaging departments. Constancy tests. Method for X-ray equipment for computed tomography
DC94/507522 DC94/507522. Specification for pen injectors for medical use (ISO/DIS 11608). Part 1: Requirements and test methods
DC94/506975 DC94/506975. prEN 1650. Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of fungicidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas. Test method and requirements
DC94/506771 DC94/506771. BS EN 1441. Medical devices. Risk analysis (draft prEN 1441)
DC94/712748 DC94/712748. Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgings. Part 3: Reference blocks (prEN 4050-3)
DC94/713051 DC94/713051. Reciprocating internal combustion engines. Safety. Part 1:Compression ignition engines (prEN 1679-1)
DC94/307750 DC94/307750. prEN 1187-2. External fire exposure to roofs. Part 2. Method of test simulating exposure to burning brands, with wind and supplementary radiant heat
94/647576DC 94/647576DC. ISO/IEC DIS 13522-1. Information technology. Coding of multimedia and hypermedia information. Part 1. MHEG objects representation. Base notation (ASN.1) (ISO/IEC 13522-1)
DC94/342154 DC94/342154. Fibre reinforced plastic composite. Determination of flexural properties (prEN 34125) (ISO/DIS 14125)
BS EN 591:1995 BS EN 591:1995. Specification for user manuals for in vitro diagnostic instruments for professional use
BS EN 573-2:1995 BS EN 573-2:1995. Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical symbol based designation system
BS 3680-2A:1995, ISO 9555-1:1994 BS 3680-2A:1995, ISO 9555-1:1994. Measurement of liquid flow in open channels. Dilution methods. General
BS EN 488:1995 BS EN 488:1995. Preinsulated bonded pipe systems for underground hot water networks. Steel valve assembly of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
BS EN 61223-2-5:1995, BS 7725-2.5:1995,IEC 61223-2-5:1994 BS EN 61223-2-5:1995, BS 7725-2.5:1995,IEC 61223-2-5:1994. Evaluation and routine testing in medical imaging departments. Constancy tests. Method for image display devices
BS EN 61223-2-4:1995, BS 7725-2.4:1995,IEC 61223-2-4:1994 BS EN 61223-2-4:1995, BS 7725-2.4:1995,IEC 61223-2-4:1994. Evaluation and routine testing in medical imaging departments. Constancy tests. Method for hard copy cameras
BS 7791:1995, ISO 10448:1994 BS 7791:1995, ISO 10448:1994. Agricultural tractors. Hydraulic pressure for implements
BS 115:1995 BS 115:1995. Specification for metallic resistance materials for electrical purposes
BS ISO 9022-9:1994 BS ISO 9022-9:1994. Optics and optical instruments. Environmental test methods. Solar radiation
BS ISO 9022-10:1994 BS ISO 9022-10:1994. Optics and optical instruments. Environmental test methods. Combined sinusoidal vibration, dry heat or cold
BS ISO 9022-11:1994 BS ISO 9022-11:1994. Optics and optical instruments. Environmental test methods. Mould growth
BS ISO 9022-12:1994 BS ISO 9022-12:1994. Optics and optical instruments. Environmental test methods. Contamination
BS ISO 9022-13:1994 BS ISO 9022-13:1994. Optics and optical instruments. Environmental test methods. Combines shock, bump or free-fall, dry heat or cold
BS ISO 9022-14:1994 BS ISO 9022-14:1994. Optics and optical instruments. Environmental test methods. Dew, hoarfrost, ice
BS EN 116204:1995 BS EN 116204:1995. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Electromechanical all-or-nothing sealed relays for aggressive industrial application
BS EN 116203:1995 BS EN 116203:1995. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Electromechanical all-or-nothing relays for enhanced industrial application
BS EN 61293:1995, IEC 61293:1994 BS EN 61293:1995, IEC 61293:1994. Marking of electrical equipment with ratings related to electrical supply. Safety requirements
DD ENV 1402-1:1995 DD ENV 1402-1:1995. Unshaped refractory products. Introduction and definitions
BS ISO/IEC 9545:1994 BS ISO/IEC 9545:1994. Information technology. Open Systems Interconnection. Application Layer structure
BS 7516:1995, IEC 61304:1994 BS 7516:1995, IEC 61304:1994. Nuclear instrumentation. Liquid-scintillation counting systems. Performance verification
BS 7517:1995, IEC 61227:1993 BS 7517:1995, IEC 61227:1993. Nuclear power plants. Control rooms. Operator controls
BS ISO 9772:1994 BS ISO 9772:1994. Cellular plastics. Determination of horizontal burning characteristics of small specimens subjected to a small flame
BS G 256:1995, ISO 8668-6:1994 BS G 256:1995, ISO 8668-6:1994. Specification for type 4 terminal junction systems
BS M 79:1995, ISO 11241:1994 BS M 79:1995, ISO 11241:1994. Specification for aircraft engine transport devices
PD 7006:1995 PD 7006:1995. Essential requirements for terminal equipment intended for connection to digital interfaces of the PSTN using channel associated signalling
EP 200:1997 EP 200:1997. BSI Electronic Book. Quality Management Systems
BS ISO 9022-8:1994 BS ISO 9022-8:1994. Optics and optical instruments. Environmental test methods. High pressure, low pressure, immersion
BS ISO 9022-6:1994 BS ISO 9022-6:1994. Optics and optical instruments. Environmental test methods. Dust
BS ISO 9022-5:1994 BS ISO 9022-5:1994. Optics and optical instruments. Environmental test methods. Combined cold, low air pressure
BS ISO 9022-4:1994 BS ISO 9022-4:1994. Optics and optical instruments. Environmental test methods. Salt mist
BS ISO 9022-3:1994 BS ISO 9022-3:1994. Optics and optical instruments. Environmental test methods. Mechanical stress
BS ISO 9022-2:1994 BS ISO 9022-2:1994. Optics and optical instruments. Environmental test methods. Cold, heat, humidity
BS ISO 9022-1:1994 BS ISO 9022-1:1994. Optics and optical instruments. Environmental test methods. Definitions, extent of testing
BS 5760-10.2:1995, IEC 60605-2:1994 BS 5760-10.2:1995, IEC 60605-2:1994. Reliability of systems, equipment and components. Guide to reliability testing. Design of test cycles
BS 5293-21:1995, ISO/TR 12245:1994 BS 5293-21:1995, ISO/TR 12245:1994. Sampling and testing carbon black for use in the rubber industry. Classification system for carbon blacks used in rubber products
DC94/214037 DC94/214037. Specification for aramid pressboard for electrical puposes. Part 1. Definitions, designations and general requirements (15C(Secretariat)463) (possible new British Standard)
DC94/214036 DC94/214036. Specification for corrugated pressboard and presspaper for electrical purposes. Part 1. Definitions, designations and general requirements (15C(Secretariat)462) (possible new British Standard)
BS 5293-13:1995, ISO 5435:1994 BS 5293-13:1995, ISO 5435:1994. Sampling and testing carbon black for use in the rubber industry. Method for determination of tinting strength
BS 4317-31:1995, ISO 11052:1994 BS 4317-31:1995, ISO 11052:1994. Methods of test for cereals and pulses. Determination of yellow pigment content in durum wheat flour and semolina
BS 7755-3.2:1995, ISO 10390:1994 BS 7755-3.2:1995, ISO 10390:1994. Soil quality. Chemical methods. Determination of pH
BS 7789:1995 BS 7789:1995. Guide to design of measurement laboratories
BS EN 288-5:1995 BS EN 288-5:1995. Specification and approval of welding procedures for metallic materials. Approval by using approved welding consumables for arc welding
BS EN 288-6:1995 BS EN 288-6:1995. Specification and approval of welding procedures for metallic materials. Approval related to previous experience
BS EN 665:1995 BS EN 665:1995. Resilient floor coverings. Determination of exudation of plasticizers
BS EN 666:1995 BS EN 666:1995. Resilient floor coverings. Determination of gelling
BS EN 822:1995 BS EN 822:1995. Thermal insulating products for building applications. Determination of length and width
BS EN 1152:1995 BS EN 1152:1995. Tractors and machinery for agriculture and forestry. Guards for power take-off (PTO) drive shafts. Wear and strength tests
DC94/400680 DC94/400680. Life cycle assessment. General principles and practices (ISO/CD 14040)
DC94/213417 DC94/213417. prEN 50198-2. Plugs and socket-outlets 16A - 250 V A.C. for household and similar purposes. Part 2. Conversion adaptors. General requirements
94/712602 DC 94/712602 DC. ISO/DIS 11947. Technical drawings. Views, cuts and sections. Part 3. Representation of areas on cuts and sections
94/712601DC 94/712601DC. ISO/DIS 11947. Technical drawings. Views, cuts and sections. Part 2. Cuts and sections. Part 40 Basic conventions for cuts and sections
94/712600DC 94/712600DC. ISO/DIS 11947. Technical drawings. Views, cuts and sections. Part 1. Views. Part 30: Basic conventions for views
DC94/506729 DC94/506729. ISO/DIS 11715. Opthalmic optics. Digital data record for data carriers for the processing of spectacle lenses
DC94/400700 DC94/400700. BS ISO 14021. Environmental labelling. Environmental claims. Terms and definitions (ISO/CD 14021)
BS EN ISO 9887:1995, BS 6068-5.14:1995 BS EN ISO 9887:1995, BS 6068-5.14:1995. Water quality. Evaluation of the aerobic biodegradability of organic compounds in an aqueous medium. Semi-continuous activated sludge method (SCAS)
BS EN 29367-2:1995, ISO 9367-2:1994 BS EN 29367-2:1995, ISO 9367-2:1994. Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships. General requirements. Semi-trailers
BS EN 661:1995 BS EN 661:1995. Resilient floor coverings. Determination of the spreading of water
BS EN 663:1995 BS EN 663:1995. Resilient floor coverings. Determination of conventional pattern depths
BS EN 662:1995 BS EN 662:1995. Resilient floor coverings. Determination of curling on exposure to moisture
BS EN 664:1995 BS EN 664:1995. Resilient floor coverings. Determination of volatile loss
94/308674DC 94/308674DC. Optics and optical instruments. Preparation of drawings for optical elements and systems. Material imperfections. Inhomogeneity and striae (ISO/DIS 10110-4)
94/308673DC 94/308673DC. Optics and optical instruments. Preparation of drawings for optical elements and systems. Laser irradiation damage threshold (ISO/DIS 10110-13)
94/711304DC 94/711304DC. Welding consumables. Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels. Classification (prEN 1668)
DC94/307730 DC94/307730. Respiratory protective devices. Full face masks. Requirements, testing, marking (prEN 136)
BS 903-A2:1995, ISO 37:1994 BS 903-A2:1995, ISO 37:1994. Physical testing of rubber. Method for determination of tensile stress-strain properties
BS 903-A3:1995, ISO 34-1:1994 BS 903-A3:1995, ISO 34-1:1994. Physical testing of rubber. Method for determination of tear strength (trouser, angle and crescent test pieces)
BS 903-A12:1995, ISO 36:1993 BS 903-A12:1995, ISO 36:1993. Physical testing of rubber. Method for determination of the adhesion strength to textile fabric
BS 903-A36:1995, ISO 4661-1:1993 BS 903-A36:1995, ISO 4661-1:1993. Physical testing of rubber. Method for preparation of samples and test pieces
BS 903-A44:1995, ISO 1431-2:1994 BS 903-A44:1995, ISO 1431-2:1994. Physical testing of rubber. Method of determination of resistance to ozone cracking (dynamic strain test)
BS 3900:Part D5:1995, ISO 2813:1994 BS 3900:Part D5:1995, ISO 2813:1994. Methods of test for paints. Optical tests on paint films. Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85°
BS 3900-J4:1995, ISO 8130-8:1994 BS 3900-J4:1995, ISO 8130-8:1994. Methods of test for paints. Determination of the storage stability of coating powders
BS EN ISO/IEC 9945-2:1995 BS EN ISO/IEC 9945-2:1995. Information technology. Portable operating system interface (POSIX). Shell and utilities
94/710284DC 94/710284DC. Welding consumables. Covered electrodes for manual metal arc welding of stainless and heat resisting steels. Classification (prEN 1600)
94/710283DC 94/710283DC. Welding consumables. Covered electrodes for manual metal arc welding of creep-resisting steels. Classification (prEN 1599)
DC94/506466 DC94/506466. Methods of test for common properties for catheters other than intravascular catheters (prEN 1618)
DC94/211572 DC94/211572. Revision of European Standard EN 50082-1:1992. Electromagnetic compatibility. Generic immunity standard. Part 1. Residential, commercial and light industry (prEN 50082-1:1994) (possible revision of BS EN 50082-1:1992)
BS EN ISO 7721-2:1995 BS EN ISO 7721-2:1995. Countersunk flat head screws. Penetration depth of cross recesses
BS ISO 10759:1994 BS ISO 10759:1994. Graphic technology. Prepress digital data exchange. Monochrome image data on magnetic tape
BS ISO 10758:1994 BS ISO 10758:1994. Graphic technology. Prepress digital data exchange. Online transfer from electronic prepress systems to colour hardcopy devices
BS ISO 10756:1994 BS ISO 10756:1994. Graphic technology. Prepress digital data exchange. Colour line art data on magnetic tape
BS EN 598:1995 BS EN 598:1995. Ductile iron pipes, fittings, accessories and their joints for sewerage applications. Requirements and test methods
BS EN 573-3:1995 BS EN 573-3:1995. Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition
DC94/505715 DC94/505715. Medical gas pipeline systems. Part 2. Anaesthetic gas scavenging disposal systems. Basic requirements (prEN 737-2)
DC94/710139 DC94/710139. prEN 1626. Cryogenic vessels. Valves for cryogenic service
DC94/505933 DC94/505933. Revision of BS 7174. Sterile intravascular catheters and ancillary devices for single use. Part 3. Specification for central venous catheters (ISO/DIS 10555-3)
DC94/710710 DC94/710710. Aerospace series. Aluminium alloy Al-P7050-T7451. Plate 6 mm < a ≤ 160 mm (prEN 3982)
94/308675DC 94/308675DC. Draft for optics and optical instruments. Preparation of drawings for optical elements and systems. Aspheric surfaces (ISO/DIS 10110-12)
BS 8298:1994 BS 8298:1994. Code of practice for design and installation of natural stone cladding and lining
BS EN 573-4:1995 BS EN 573-4:1995. Aluminium and aluminium alloys. Chemical composition and form of wrought products. Forms of products
94/341782DC 94/341782DC. Textile floor coverings. Determination of electrical resistance (ISO/DIS 10965 and possible British Standard)
BS EN ISO 7887:1995 BS EN ISO 7887:1995. Water quality. Examination and determination of colour
BS EN 489:1995 BS EN 489:1995. Preinsulated bonded pipe systems for underground hot water networks. Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
BS EN 1135:1995 BS EN 1135:1995. Fruit and vegetable juices. Method for determination of ash
BS EN 1133:1995 BS EN 1133:1995. Method for determination of formol number of fruit and vegetable juices
BS EN 602:1995 BS EN 602:1995. Aluminium and aluminium alloys. Wrought products. Chemical composition of semi products used for the fabrication of articles for use in contact with food
BS EN 601:1995 BS EN 601:1995. Aluminium and aluminium alloys. Castings. Chemical composition of castings for use in contact with food
BS 7790:Part 1:1995, ISO 11784:1994 BS 7790:Part 1:1995, ISO 11784:1994. Animal electronic identification. Specification for code structure for farm animals
BS EN 50018:1995 BS EN 50018:1995. Electrical apparatus for potentially explosive atmospheres. Flameproof enclosures 'd'
BS M 80:1995, ISO 6967:1994 BS M 80:1995, ISO 6967:1994. Air cargo equipment. Wide body aircraft main deck container/pallet loader. Functional requirements
BS 4401-11:1995, ISO 3496:1994 BS 4401-11:1995, ISO 3496:1994. Methods of test for meat and meat products. Determination of hydroxyproline content
BS EN 60995:1995, IEC 60995:1991 BS EN 60995:1995, IEC 60995:1991. Determination of the prototype performance from model acceptance tests of hydraulic machines with the consideration of scale effects
BS EN 824:1995 BS EN 824:1995. Thermal insulating products for building applications. Determination of squareness
BS EN 823:1995 BS EN 823:1995. Thermal insulating products for building applications. Determination of thickness
BS EN 825:1995 BS EN 825:1995. Thermal insulating products for building applications. Determination of flatness
BS EN 463:1995 BS EN 463:1995. Protective clothing. Protection against liquid chemicals. Test method. Determination of resistance to penetration by a jet of liquid (jet test)
BS 7776:1995 BS 7776:1995. Glossary of torque terminology for threaded fasteners
BS 5993:1994 BS 5993:1994. Specification for cricket balls
BS 6912-14:1995, ISO 3471:1994 BS 6912-14:1995, ISO 3471:1994. Safety of earth-moving machinery. Specification for laboratory tests and performance requirements of roll-over protective structures
BS 7792:1995, ISO 10630:1994 BS 7792:1995, ISO 10630:1994. Specification for industrial plate screens
BS EN 60641-3-2:1995, IEC 60641-3-2:1992 BS EN 60641-3-2:1995, IEC 60641-3-2:1992. Specification for pressboard and presspaper for electrical purposes. Specifications for individual materials. Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3, P.6.1 and P.7.1
BS EN 378-1:1995 BS EN 378-1:1995. Specification for refrigerating systems and heat pumps. Safety and environmental requirements. Basic requirements
BS EN ISO 2009:1995 BS EN ISO 2009:1995. Slotted countersunk flat head screws (common head style). Product grade A
BS EN 585:1995 BS EN 585:1995. Gas welding equipment. Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 200 bar
BS CECC 00114-2:1995 BS CECC 00114-2:1995. Rule of procedure 14. Quality assessment procedures. Qualification approval of electronic components
BS ISO/IEC TR 10171:1994 BS ISO/IEC TR 10171:1994. Information technology. Telecommunications and information exchange between systems. List of standard data link layer protocols that utilize High-Level Data Link Control (HDLC) classes of procedures and list of standardized XID format identifiers and private parameter set identification values
PD 7004:1995 PD 7004:1995. Essential requirements for terminal equipment intended for connection to digital interfaces of the PSTN using Digital Access Signalling System No.2 (DASS 2)
PD 7027:1995 PD 7027:1995. Essential requirements for terminal equipment intended for connection to digital leased circuits of the public telecommunications network using a CCITT Recommendation X.21bis interface
BS EN 122200:1995 BS EN 122200:1995. Harmonized system of quality assessment for electronic components. Sectional specification. Radio frequency coaxial connectors. Series TNC
BS EN 61157:1995, IEC 61157:1992 BS EN 61157:1995, IEC 61157:1992. Requirements for the declaration of the acoustic output of medical diagnostic ultrasonic equipment
BS EN 1136:1995 BS EN 1136:1995. Method for determination of phosphorus content of fruit and vegetable juices: spectrometric method
BS EN ISO 1483:1995 BS EN ISO 1483:1995. Slotted raised countersunk (oval) head tapping screws (common head style)
BS EN 1137:1995 BS EN 1137:1995. Method for determination of citric acid (citrate) content of fruit and vegetable juices: NADH spectrometric method
BS EN 1131:1995 BS EN 1131:1995. Method for determination of the relative density of fruit and vegetable juices
BS EN 1132:1995 BS EN 1132:1995. Method determination of the pH-value of fruit and vegetable juices
BS 5502-31:1995 BS 5502-31:1995. Buildings and structures for agriculture. Guide to the storage and handling of waste
BS 7463-6:1995, ISO 9184-6:1994 BS 7463-6:1995, ISO 9184-6:1994. Fibre furnish analysis of paper, board and pulps. Determination of fibre coarseness
BS 8303-2:1994 BS 8303-2:1994. Installation of domestic heating and cooking appliances burning solid mineral fuels. Installation of domestic heating and cooking appliances buring solid mineral fuels. Specification for installing and commissioning on site
BS 8303-3:1994 BS 8303-3:1994. Installation of domestic heating and cooking appliances burning solid mineral fuels. Recommendations for design and on site installation
BS 8303-1:1994 BS 8303-1:1994. Installation of domestic heating and cooking appliances burning solid mineral fuels. Installation of domestic heating and cooking appliances burning solid mineral fuels. Specification for the design of installations
BS 4747-2:1995, ISO 801-2:1994 BS 4747-2:1995, ISO 801-2:1994. Methods for determination of saleable mass, in lots, of pulp. Pulps (such as flash-dried pulps) baled in slabs
BS EN 71-6:1995, BS 5665-6:1995 BS EN 71-6:1995, BS 5665-6:1995. Safety of toys. Graphical symbols for age warning labelling
BS 7463-7:1995, ISO 9184-7:1994 BS 7463-7:1995, ISO 9184-7:1994. Fibre furnish analysis of paper, board and pulps. Determination of weight factors
BS 7788:1995 BS 7788:1995. Specification for formatting and exchanging EFT-POS messages between a single acceptor and acquirer
BS 7779:1994 BS 7779:1994. Specification for semi-transparent priming stains (stain basecoats) for joinery
BS 6180:1995 BS 6180:1995. Code of practice for barriers in and about buildings
PD 6576:1995, CR 1100:1993 PD 6576:1995, CR 1100:1993. Memorandum on health and safety standardization in support of 'New Approach' Directives. Application in the field of machinery
BS EN ISO 7049:1995 BS EN ISO 7049:1995. Cross recessed pan head tapping screws
BS EN 1141:1995 BS EN 1141:1995. Method for determination of proline content in fruit and vegetable juices: spectrometric method
BS EN ISO 4757:1995 BS EN ISO 4757:1995. Cross recesses for screws
BS 3680-6:1995 BS 3680-6:1995. Measurement of liquid flow in open channels. Guide to measurement of flow in tidal channels
BS EN 1134:1994 BS EN 1134:1994. Method for determination of sodium, potassium, calcium and magnesium contents of fruit and vegetable juices by atomic absorption spectrometry
BS EN ISO 7051:1995 BS EN ISO 7051:1995. Specification for cross-recessed raised countersunk (oval) head tapping screws
BS EN 61010-2-031:1995, IEC 61010-2-031:1993 BS EN 61010-2-031:1995, IEC 61010-2-031:1993. Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for hand-held probe assemblies for electrical measurement and test
BS EN 147100:1995 BS EN 147100:1995. Harmonized system of quality assessment for electronic components. Sectional specification: relay sockets of assessed quality
BS EN ISO 1741:1995 BS EN ISO 1741:1995. Dextrose. Determination of loss in mass on drying. Vacuum oven method
BS EN 147000:1995 BS EN 147000:1995. Harmonized system of quality assessment for electronic components. Generic specification. Sockets for use with electrical relays of assessed quality
BS EN 764:1995 BS EN 764:1995. Pressure equipment. Terminology and symbols. Pressure, temperature, volume
DD 221:1995, CR 1472:1994 DD 221:1995, CR 1472:1994. General guidance for the marking of gas appliances
BS EN 61237-1:1994, IEC 61237-1:1994 BS EN 61237-1:1994, IEC 61237-1:1994. Broadcast video tape recorders. Methods of measurement. Mechanical measurements
BS EN 20105-A03:1995, ISO 105-A03:1993 BS EN 20105-A03:1995, ISO 105-A03:1993. Textiles. Tests for colour fastness. Grey scale for assessing staining
BS EN 590:1995 BS EN 590:1995. Specification for automotive diesel fuel
BS EN 1138:1995 BS EN 1138:1995. Method for enzymatic determination of L-malic acid (L-malate) content of fruit and vegetable juices. NADH spectrometric method
BS EN ISO 2010:1995 BS EN ISO 2010:1995. Countersunk slotted raised head screws (common head style). Product grade A
BS EN 20105-A02:1995, ISO 105-A02:1993 BS EN 20105-A02:1995, ISO 105-A02:1993. Textiles. Tests for colour fastness. Grey scale for assessing change in colour
BS EN 10028-4:1995 BS EN 10028-4:1995. Specification for flat products made of steels for pressure purposes. Nickel alloy steels with specified low temperature properties
BS 8212:1995 BS 8212:1995. Code of practice for dry lining and partitioning using gypsum plasterboard
BS 4088-3:1995 BS 4088-3:1995. Carpet cleaning products. Specification for spray extraction machine formulations used in liquid form
BS 4088-4:1995 BS 4088-4:1995. Carpet cleaning products. Specification for impregnated powder formulations
BS 4088-1.3:1995 BS 4088-1.3:1995. Carpet cleaning products. Methods of sampling and test. General methods for impregnated powder formulations
BS 4088-1.2:1995 BS 4088-1.2:1995. Carpet cleaning products. Methods of sampling and test. Determination of cleaning performance of formulations designed for use with spray extraction machines
BS EN 1185:1995 BS EN 1185:1995. Starches and derived products. Determination of sulfur dioxide content. Acidimetric method
BS EN 1142:1995 BS EN 1142:1995. Method for determination of sulfate content of fruit and vegetable juices
BS EN 1140:1995 BS EN 1140:1995. Method for determination of D-glucose and D-fructose content of fruit and vegetable juices. NADPH spectrometric method
BS EN 1139:1995 BS EN 1139:1995. Method for determination of D-isocitric acid content of fruit and vegetable juices. NADPH spectrometric method
BS EN 592:1995 BS EN 592:1995. Specification for user manuals for in vitro diagnostic instruments for home use
BS 8297:1995 BS 8297:1995. Code of practice for design and installation of non-loadbearing precast concrete cladding
BS EN ISO 7047:1995 BS EN ISO 7047:1995. Countersunk raised head screws (common head style) with type H or type Z cross recess. Product grade A
BS EN 50083-5:1994 BS EN 50083-5:1994. Cabled distribution systems for television and sound signals. Headend equipment
BS 1016-109:1995, ISO 1953:1994 BS 1016-109:1995, ISO 1953:1994. Methods for analysis and testing of coal and coke. Size analysis of coal
BS EN ISO 7046-2:1995 BS EN ISO 7046-2:1995. Countersunk flat head screws (common head style) with type H or type Z cross recess. Product grade A. Steel of property class 8.8, stainless steel and non-ferrous metals
BS EN 573-1:1995 BS EN 573-1:1995. Aluminium and aluminium alloys. Chemical composition and form of wrought products. Numerical designation system
DD 218:1995 DD 218:1995. Testing aggregates. Method for determination of alkali-silica reactivity. Concrete prism method
BS EN ISO 1478:1995 BS EN ISO 1478:1995. Tapping screw threads
BS ISO/IEC 11571:1994 BS ISO/IEC 11571:1994. Information technology. Telecommunications and information exchange between systems. Numbering and sub-addressing in private integrated services networks
BS 6767-1:1992 BS 6767-1:1992. Transportable accommodation units. Recommendations for design and construction
PD 6541:1995, CENELEC Report R064-002:1994 PD 6541:1995, CENELEC Report R064-002:1994. Guide to selection and erection of electrical equipment. Wiring systems. Limitation of temperature rises of connecting interfaces
PD 6542:1994, CR 1350:1993 PD 6542:1994, CR 1350:1993. Investigation of syntaxes for existing interchange formats to be used in healthcare
DD 220:1994, ISO/TR 11046:1994 DD 220:1994, ISO/TR 11046:1994. Soil quality. Determination of mineral oil content. Method by infrared spectrometry and gas chromatographic method
PD 6574:1994, CR 1404:1994 PD 6574:1994, CR 1404:1994. Determination of emissions from appliances burning gaseous fuels during type-testing
PD 6573:1994, IEC TR 60513:1994 PD 6573:1994, IEC TR 60513:1994. Fundamental aspects of safety standards for medical electrical equipment
PD 7639-2:1994, IEC 60909-2:1992 PD 7639-2:1994, IEC 60909-2:1992. Short-circuit current calculation in three-phase a.c. systems. Data for electrical equipment for short-circuit current calculations in accordance with BS 7639
PD 7639-1:1994, IEC 60909-1:1991 PD 7639-1:1994, IEC 60909-1:1991. Short-circuit current calculation in three-phase a.c. systems. Factors for the calculation of short-circuit currents in three-phase a.c. systems according to BS 7639
PD 6540:1994, ISO TR 11175:1993 PD 6540:1994, ISO TR 11175:1993. Dental implants. Guidelines for developing dental implants
DD ENV 60349-2:1994, IEC 60349-2:1993 DD ENV 60349-2:1994, IEC 60349-2:1993. Railway applications. Rotating electrical machines for rail and road vehicles. Electronic convertor-fed alternating current motors
BS 2011-5.2:1992, IEC 60068-5-2:1990 BS 2011-5.2:1992, IEC 60068-5-2:1990. Environmental testing. Guide to drafting of test methods. Terms and definitions
BS EN 27027:1994, BS 6068-2.13:1994,ISO 7027:1990 BS EN 27027:1994, BS 6068-2.13:1994,ISO 7027:1990. Water quality. Determination of turbidity
BS EN 903:1994, BS 6068-2.23:1994 BS EN 903:1994, BS 6068-2.23:1994. Water quality. Determination of anionic surfactants by measurement of the methylene blue index MBAS
BS EN 22286:1994, BS 3424:Part 1:1994,ISO 2286:1986 BS EN 22286:1994, BS 3424:Part 1:1994,ISO 2286:1986. Methods for the determination of length and width of a roll, net mass and mean mass per unit area of a piece, cut, roll or sample and the determination of thickness for coated fabrics
BS EN 29646-3:1994, ISO/IEC 9646-3:1992 BS EN 29646-3:1994, ISO/IEC 9646-3:1992. Information technology. Open Systems Interconnection. Conformance testing methodology and framework. The Tree and Tabular Combined Notation (TTCN)
BS 3546-2:1993 BS 3546-2:1993. Coated fabrics for use in the manufacture of water penetration resistant clothing. Specification for non-water vapour permeable coated fabrics
PD 6535:1993, IEC 61140:1992 PD 6535:1993, IEC 61140:1992. Guide to common aspects of installation and equipment for protection against electric shock
DD ENV 25349:1993, ISO 5349:1986 DD ENV 25349:1993, ISO 5349:1986. Mechanical vibration. Guidelines for the measurement and the assessment of human exposure to hand-transmitted vibration
BS EN 50072:1992, BS 5724-2.29:1992 BS EN 50072:1992, BS 5724-2.29:1992. Medical electrical equipment. Particular requirements for safety. Specification for peritoneal dialysis equipment
PD 6536:1992, IEC 61201:1992 PD 6536:1992, IEC 61201:1992. Extra-low voltage (ELV). Limit values
DD 212:1992, ISO/TR 6627:1992 DD 212:1992, ISO/TR 6627:1992. Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Specification for expander/segment oil control rings
BS EN 61078:1994, BS 5760-9:1992,IEC 61078:1991 BS EN 61078:1994, BS 5760-9:1992,IEC 61078:1991. Reliability of systems, equipment and components. Guide to the block diagram technique
BS EN 60870-5-2:1994, IEC 60870-5-2:1992 BS EN 60870-5-2:1994, IEC 60870-5-2:1992. Telecontrol equipment and systems. Transmission protocols. Link transmission procedures
BS EN 27787-3:1994, ISO 7787-3:1991 BS EN 27787-3:1994, ISO 7787-3:1991. Specification for dental rotary instruments. Cutters. Carbide laboratory cutters for milling machines
BS EN 30139-1:1994, BS 7589-1:1992,ISO 10139-1:1991 BS EN 30139-1:1994, BS 7589-1:1992,ISO 10139-1:1991. Dentistry. Resilient lining materials for removable dentures. Specification for short-term materials
BS EN 24823:1994, ISO 4823:1992 BS EN 24823:1994, ISO 4823:1992. Dental elastic impression material. Specification for elastomeric impression materials
BS F 141:1992 BS F 141:1992. Specification for closely woven cotton fabrics (L28 and L34) for aerospace purposes
BS ISO/IEC 9636-1:1991 BS ISO/IEC 9636-1:1991. Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Functional specification. Overview, profiles, and conformance
PD 6532-4:1992, ISO Guide 35:1989 PD 6532-4:1992, ISO Guide 35:1989. Reference materials. Guide to the contents of certificates of reference materials. Guide to general and statistical principles for the certification of reference materials
PD 6532-3:1992, ISO Guide 33:1989 PD 6532-3:1992, ISO Guide 33:1989. Reference materials. Guide to the contents of certificates of reference materials. Guide to the uses of certified reference materials
PD 6532-2:1992, ISO Guide 31:1981 PD 6532-2:1992, ISO Guide 31:1981. Reference materials. Guide to the contents of certificates of reference materials. Guide to the contents of certificates of reference materials
DD 209:1992, ISO/TR 6624-2:1988 DD 209:1992, ISO/TR 6624-2:1988. Piston rings up to 200 mm diameter for reciprocating internal combustion engines: specification for half keystone rings
DD ENV 22605-3:1992, ISO 2605-3:1985 DD ENV 22605-3:1992, ISO 2605-3:1985. Steel products for pressure purposes. Derivation and verification of elevated temperature properties. An alternative procedure for deriving the elevated temperature yield or proof stress properties when data are limited
DD ENV 22605-2:1992, ISO 2605-2:1976 DD ENV 22605-2:1992, ISO 2605-2:1976. Steel products for pressure purposes. Derivation and verification of elevated temperature properties. Proof stress of austenitic steel products
DD ENV 22605-1:1992, ISO 2605-1:1976 DD ENV 22605-1:1992, ISO 2605-1:1976. Steel products for pressure purposes. Derivation and verification of elevated temperature properties. Yield or proof stress of carbon and low alloy steel products
BS EN 60835-3-1:1994, BS 7573-3.1:1992,IEC 60835-3-1:1990 BS EN 60835-3-1:1994, BS 7573-3.1:1992,IEC 60835-3-1:1990. Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on satellite earth stations. General
BS EN 21512:1994, BS 3900-A1:1992,ISO 1512:1991 BS EN 21512:1994, BS 3900-A1:1992,ISO 1512:1991. Methods of test for paints. Sampling
BS 3408:1992 BS 3408:1992. Specification for tarpaulins
BS EN 27785-2:1994, ISO 7785-2:1991 BS EN 27785-2:1994, ISO 7785-2:1991. Specification for dental handpieces. Dental handpieces and accessories. Dental handpieces. Specification for straight and geared angle handpieces
BS EN 60601-2-2:1993 BS EN 60601-2-2:1993. Medical electrical equipment. Particular requirements for safety. Specification for high frequency surgical equipment
BS QC 300900:1991, IEC 60384-7:1991 BS QC 300900:1991, IEC 60384-7:1991. Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification: fixed polystyrene film dielectric metal foil d.c. capacitors
BS ISO/IEC 9541-2:1991 BS ISO/IEC 9541-2:1991. Information technology. Font information interchange. Interchange format
BS EN 100015-1:1992 BS EN 100015-1:1992. Basic specification. Protection of electrostatic sensitive devices. Harmonized system of quality assessment for electronic components. Basic specification: protection of electrostatic sensitive devices. General requirements
BS 3254-2:1991 BS 3254-2:1991. Seat belt assemblies for road vehicles. Specification for restraining devices for children
BS EN 25667-2:1993, BS 6068-6.2:1991,ISO 5667-2:1991 BS EN 25667-2:1993, BS 6068-6.2:1991,ISO 5667-2:1991. Water quality. Sampling. Guidance on sampling techniques
BS EN 60721-3-2:1993, IEC 60721-3-2:1985 BS EN 60721-3-2:1993, IEC 60721-3-2:1985. Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Transportation
BS EN 60721-3-1:1993, IEC 60721-3-1:1987 BS EN 60721-3-1:1993, IEC 60721-3-1:1987. Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Storage
BS EN 61083-1:1993 BS EN 61083-1:1993. Digital recorders for measurements in high-voltage impulse tests. Requirements for digital recorders
BS EN ISO 7046-1:1994 BS EN ISO 7046-1:1994. Countersunk flat head screws (common head style) with type H or type Z cross recess. Product grade A. Countersunk flat head screws (common head style) with type H or type Z cross recess. Product grade A. Steel property class 4.8
BS EN ISO 9004-1:1994 BS EN ISO 9004-1:1994. Quality management and quality assurance standards. Guidelines
BS EN ISO 9000-1:1994 BS EN ISO 9000-1:1994. Quality management and quality assurance standards. Guidelines for selection and use
QC 001005:1994 QC 001005:1994. Register of firms, products and services approved under the IECQ system, including ISO 9000
BS EN 12:1994, BS 2000-402:1994 BS EN 12:1994, BS 2000-402:1994. Methods of test for petroleum and its products. Petroleum products. Determination of Reid vapour pressure. Wet method
DD ENV 1007-3:1994 DD ENV 1007-3:1994. Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Determination of filament diameter
DD ENV 1007-1:1994 DD ENV 1007-1:1994. Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Determination of size content
BS 1000M-2:1993 BS 1000M-2:1993. Universal Decimal Classification. International Medium Edition. English text. Edition 2. Alphabetical subject index
DD ENV 1159-2:1994 DD ENV 1159-2:1994. Advanced technical ceramics. Ceramic composites. Thermophysical properties. Determination of thermal diffusivity
DD ENV 1159-1:1994 DD ENV 1159-1:1994. Advanced technical ceramics. Ceramic composites. Thermophysical properties. Determination of thermal expansion
BS EN 60865-1:1994, IEC 60865-1:1993 BS EN 60865-1:1994, IEC 60865-1:1993. Short-circuit currents. Calculation of effects. Definitions and calculation methods
DD ENV 820-2:1994 DD ENV 820-2:1994. Advanced technical ceramics. Methods of testing monolithic ceramics. Thermo-mechanical properties. Determination of self-loaded deformation
BS 1000M-1:1993 BS 1000M-1:1993. Universal Decimal Classification. International Medium Edition. English text. Edition 2. Systematic tables
DD ENV 623-4:1994 DD ENV 623-4:1994. Advanced technical ceramics. Monolithic ceramics. General and textural properties. Determination of surface roughness
PD 6583:1993, ISO TR 10271:1993 PD 6583:1993, ISO TR 10271:1993. Dentistry. Information on methods available for the determination of tarnish and corrosion of metals and alloys
DD ENV 658-5:1993 DD ENV 658-5:1993. Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of shear strength by short span bend test (three point)
DD ENV 658-4:1993 DD ENV 658-4:1993. Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of shear strength by compression loading of notched specimens
BS 5126-4:1993 BS 5126-4:1993. Mining type flameproof supply and control units for use on systems up to 1100 V. Specification for air-cooled transformers to power drilling machines
DD ENV 658-2:1993 DD ENV 658-2:1993. Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of compressive strength
PD 6582:1993, CENELEC R110-002:1993 PD 6582:1993, CENELEC R110-002:1993. Electromagnetic compatibility (EMC). Guide to generic EMC standards
DD 214:1993, ECISS/IC 10:1992 DD 214:1993, ECISS/IC 10:1992. Designation system for steel: additional symbols for steel names (ECISS Information Circular 10)
DD ENV 28041:1993, ISO 8041:1990 DD ENV 28041:1993, ISO 8041:1990. Human response to vibration. Measuring instrumentation
PD 6538:1993, ISO Vision 2000:1993 PD 6538:1993, ISO Vision 2000:1993. Vision 2000. A strategy for international standards' implementation in the quality arena during the 1990s
BS EN 60835-2-10:1993, BS 7573-2.10:1993,IEC 60835-2-10:1992 BS EN 60835-2-10:1993, BS 7573-2.10:1993,IEC 60835-2-10:1992. Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on terrestrial radio-relay systems. Overall system performance
BS EN 29241-2:1993, ISO 9241-2:1992 BS EN 29241-2:1993, ISO 9241-2:1992. Ergonomic requirements for office work with visual display terminals (VDTs). Guidance on task requirements
BS EN 29241-1:1993, ISO 9241-1:1992 BS EN 29241-1:1993, ISO 9241-1:1992. Ergonomic requirements for office work with visual display terminals (VDTs). General introduction
BS EN 100114-1/Issue 1:1994 BS EN 100114-1/Issue 1:1994. CECC Quality assessment procedure for electronic components. Rule of procedure 14. Quality assessment procedures. Approval of manufacturers and other organizations
BS EN 27785-1:1994, ISO 7785-1:1992 BS EN 27785-1:1994, ISO 7785-1:1992. Specification for dental handpieces. Dental handpieces and accessories. Handpieces. Specification for high-speed air-turbine handpieces
BS EN 26461-1:1993, BS 6068-4.8:1993,ISO 6461-1:1986 BS EN 26461-1:1993, BS 6068-4.8:1993,ISO 6461-1:1986. Water quality. Detection and enumeration of the spores of sulfite-reducing anaerobes (Clostridia). Method by enrichment in a liquid medium
BS 3156-11.4.4:1994, ISO 6326-4:1994 BS 3156-11.4.4:1994, ISO 6326-4:1994. Analysis of fuel gases. Methods for non-manufactured gases. Determination of sulfur compounds in natural gas. Hydrogen sulfide, carbonyl sulfide, and sulfur-containing odorants by gas chromatography using a flame photometric detector
BS EN 539-1:1994 BS EN 539-1:1994. Clay roofing tiles for discontinuous laying. Determination of physical characteristics. Impermeability test
BS EN 538:1994 BS EN 538:1994. Clay roofing tiles for discontinuous laying. Flexural strength test
BS EN 501:1994 BS EN 501:1994. Roofing products from metal sheet. Specifications for fully supported roofing products of zinc sheet
BS 3156-11.4.2:1994, ISO 6326-2:1981 BS 3156-11.4.2:1994, ISO 6326-2:1981. Analysis of fuel gases. Methods for non-manufactured gases. Determination of sulfur compounds in natural gas. Odoriferous sulfur compounds by gas chromatography using an electrochemical detector
BS 3156-11.4.1:1994, ISO 6326-1:1989 BS 3156-11.4.1:1994, ISO 6326-1:1989. Analysis of fuel gases. Methods for non-manufactured gases. Determination of sulfur compounds in natural gas. Introduction
BS EN ISO 1580:1994 BS EN ISO 1580:1994. Slotted pan head screws. Product grade A
BS EN 186005:1994 BS EN 186005:1994. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Connector for optical fibres and cables. Environmental category V
BS EN 186004:1994 BS EN 186004:1994. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Connector for optical fibres and cables. Environmental category IV
BS EN 186003:1994 BS EN 186003:1994. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Connector for optical fibres and cables. Environmental category III
BS EN 186002:1994 BS EN 186002:1994. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Connector for optical fibres and cables. Environmental category II
BS EN 186001:1994 BS EN 186001:1994. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Connectors for optical fibres and cables. Environmental category I
BS 7781:1994 BS 7781:1994. Procedure for type testing of small biological domestic wastewater treatment plants
BS EN 561:1995 BS EN 561:1995. Gas welding equipment. Quick-action couplings with shut-off valves for welding, cutting and allied processes
BS EN 511:1994 BS EN 511:1994. Specification for protective gloves against cold
BS EN 729-4:1995 BS EN 729-4:1995. Quality requirements for welding. Fusion welding of metallic materials. Elementary quality requirements
BS EN 729-3:1995 BS EN 729-3:1995. Quality requirements for welding. Fusion welding of metallic materials. Standard quality requirements
BS EN 729-2:1995 BS EN 729-2:1995. Quality requirements for welding. Fusion welding of metallic materials. Comprehensive quality requirements
BS EN 729-1:1995 BS EN 729-1:1995. Quality requirements for welding. Fusion welding of metallic materials. Guidelines for selection and use
BS EN ISO 7050:1995 BS EN ISO 7050:1995. Specification for cross-recessed countersunk (flat) head tapping screws (common head style)
BS EN ISO 7045:1995 BS EN ISO 7045:1995. Pan head screws with type H or type Z cross recess. Product grade A
BS EN ISO 1482:1995 BS EN ISO 1482:1995. Specification for slotted countersunk (flat) head tapping screws (common head style)
BS EN ISO 1481:1995 BS EN ISO 1481:1995. Specification for slotted pan-head tapping screws
BS EN ISO 1479:1995 BS EN ISO 1479:1995. Specification for hexagon-head tapping screws
BS EN 657:1994 BS EN 657:1994. Thermal spraying. Terminology, classification
BS EN 286-4:1995 BS EN 286-4:1995. Simple unfired pressure vessels designed to contain air or nitrogen. Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock
BS EN 286-3:1995 BS EN 286-3:1995. Simple unfired pressure vessels designed to contain air or nitrogen. Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock
BS 7773:1995 BS 7773:1995. Code of practice for cleaning and preparation of metal surfaces


Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm

No comments:

Post a Comment