2009/09/07

Cheapest & Latest BSI Standard (PDF) (22)

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm


BS 4873:2004 BS 4873:2004. Aluminium alloy windows
BS EN 12094-2:2003 BS EN 12094-2:2003. Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for non-electrical automatic control and delay devices
BS EN 12259-5:2002 BS EN 12259-5:2002. Fixed firefighting systems. Components for sprinkler and water spray systems. Water flow detectors
ISO17633 : 2004 EDTN1 ISO17633 : 2004 EDTN1. ISO17633 : 2004 Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels -- Classification
PD IEC TR 61282-3:2002 PD IEC TR 61282-3:2002. Fibre optic communication system design guides. Calculation of polarization mode dispersion
BS ISO 13003:2003 BS ISO 13003:2003. Fibre-reinforced plastics. Determination of fatigue properties under cyclic loading conditions
BS EN 61029-2-4:2003 BS EN 61029-2-4:2003. Safety of transportable motor-operated tools. Particular requirements for bench grinders
ISO7010 : 2003 EDTN 1 ISO7010 : 2003 EDTN 1. ISO3864-2 : 2003 Safety colours and safety signs. Part 2: Safety signs in workplaces and public areas - Overview of standardized safety signs
BS X 37:2004 BS X 37:2004. Intumescent paint for aerospace purposes. Specification
ISO6182-11 : 2003 EDTN1 ISO6182-11 : 2003 EDTN1. ISO6182-11 : 2003 Fire protection - Automatic sprinkler systems. Part 11: Requirements and test methods for pipe hangers
BS EN 12400:2002 BS EN 12400:2002. Windows and pedestrian doors. Mechanical durability. Requirements and classification
BS EN 13920-16:2003 BS EN 13920-16:2003. Aluminium and aluminium alloys. Scrap. Scrap consisting of skimmings, drosses, spills and metallics
BS EN 13920-15:2003 BS EN 13920-15:2003. Aluminium and aluminium alloys. Scrap. Decoated aluminium scrap from post-consumer aluminium packagings
BS EN 13920-14:2003 BS EN 13920-14:2003. Aluminium and aluminium alloys. Scrap. Scrap from post-consumer aluminium packagings
BS EN 13920-13:2003 BS EN 13920-13:2003. Aluminium and aluminium alloys. Scrap. Mixed turnings consisting of two or more alloys
BS EN 13920-12:2003 BS EN 13920-12:2003. Aluminium and aluminium alloys. Scrap. Turnings consisting of one single alloy
BS EN 13920-11:2003 BS EN 13920-11:2003. Aluminium and aluminium alloys. Scrap. Scrap consisting of aluminium-copper radiators
BS EN 13920-10:2003 BS EN 13920-10:2003. Aluminium and aluminium alloys. Scrap. Scrap consisting of used aluminium beverage cans
BS EN 13920-9:2003 BS EN 13920-9:2003. Aluminium and aluminium alloys. Scrap. Scrap from aluminium separation processes of non-ferrous shredded materials
BS EN 13920-7:2003 BS EN 13920-7:2003. Aluminium and aluminium alloys. Scrap. Scrap consisting of castings
BS EN 13920-6:2003 BS EN 13920-6:2003. Aluminium and aluminium alloys. Scrap. Scrap consisting of two or more wrought alloys
BS EN 13920-5:2003 BS EN 13920-5:2003. Aluminium and aluminium alloys. Scrap. Scrap consisting of two or more wrought alloys of the same series
BS EN 13920-4:2003 BS EN 13920-4:2003. Aluminium and aluminium alloys. Scrap. Scrap consisting of one single wrought alloy
BS EN 13920-3:2003 BS EN 13920-3:2003. Aluminium and aluminium alloys. Scrap. Wire and cable scrap
BS EN 13920-2:2003 BS EN 13920-2:2003. Aluminium and aluminium alloys. Scrap. Unalloyed aluminium scrap
BS EN 13195-1:2002 BS EN 13195-1:2002. Aluminium and aluminium alloys. Wrought and cast products for marine applications (shipbuilding, marine and offshore). Specifications
BS EN 13298:2003 BS EN 13298:2003. Railway applications. Suspension components. Helical suspension springs, steel
BS EN 13260:2003 BS EN 13260:2003. Railway applications. Wheelsets and bogies. Wheelsets. Products requirements
BS EN 12561-6:2002 BS EN 12561-6:2002. Railway applications. Tank wagons. Manholes
BS EN 12561-5:2002 BS EN 12561-5:2002. Railway applications. Tank wagons. Top devices for bottom emptying and top filling of liquid products
BS EN 12561-4:2002 BS EN 12561-4:2002. Railway applications. Tank wagons. Top devices for top emptying and filling of liquid products
BS EN 12561-3:2002 BS EN 12561-3:2002. Railway applications. Tank wagons. Bottom filling and emptying devices for gases liquefied under pressure
BS EN 12561-2:2002 BS EN 12561-2:2002. Railway applications. Tank wagons. Bottom emptying devices for liquid products including vapour return
BS EN 13129-1:2002 BS EN 13129-1:2002. Railway applications. Air conditioning for main line rolling stock. Comfort parameters
BS EN ISO 13900:2002 BS EN ISO 13900:2002. Steel. Determination of boron content. Curcumin spectrophotometric method after distillation
BS EN ISO 10714:2002 BS EN ISO 10714:2002. Steel and iron. Determination of phosphorus content. Phosphovanadomolybdate spectrophotometric method
ISO17893 : 2004 EDTN.1 ISO17893 : 2004 EDTN.1. ISO17893 : 2004 Steel wire ropes - Vocabulary, designation and classifications
ISO4344 : 2004 EDTN2 ISO4344 : 2004 EDTN2. ISO 4344 Steel wire ropes for lifts - Minimum requirements
ISO2408 : 2004 EDTN.3 ISO2408 : 2004 EDTN.3. ISO 2408 Steel wire ropes for general purposes - Minimum requirements
WD/ISO4898 : 2004 EDTN2 WD/ISO4898 : 2004 EDTN2. ISO4898 : 2004 Rigid cellular plastics - Thermal insulation products for buildings - Specifications
ISO18175 : 2004 EDTN.1 ISO18175 : 2004 EDTN.1. ISO18175 : 2004 Non-destructive testing - Evaluating performance characteristics of ultraonic pulse-echo testing systems without the use of electronic measurement instruments
BS 4F 68:2002 BS 4F 68:2002. Controlled storage of vulcanized rubbers for use in aerospace applications
BS EN 60684-3-403 to 405:2002 BS EN 60684-3-403 to 405:2002. Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Glass textile sleeving with acrylic based coating. Glass textile sleeving with acrylic coating.
WD/ISO11607 : 2003 EDTN 2 WD/ISO11607 : 2003 EDTN 2. ISO11607 : 2003 Packaging for terminally sterilized medical devices
BS 7870-7.2:2003 BS 7870-7.2:2003. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for power cables having rated voltages of 3.8/6.6 kV and 6.35/11 kV with special fire performance for use in power stations. Single-core and 3-core cables with halogen-free materials and with aluminium or steel wire armouring
ISO8871-2 : 2003 EDTN 1 ISO8871-2 : 2003 EDTN 1. ISO8871-2 : 2003 Elastomeric parts for containers for parenterals and for devices for pharmaceutical use. Part 2: Test for identification and characterization
DD CEN/TS 14405:2004 DD CEN/TS 14405:2004. Characterization of waste. Leaching behaviour tests. Up-flow percolation test (under specified conditions)
DD CEN ISO/TS 17573:2003 DD CEN ISO/TS 17573:2003. Road transport and traffic telematics. Electronic fee collection (EFC). System architecture for vehicle related transport services
BS EN 61965:2001 BS EN 61965:2001. Mechanical safety of cathode ray tubes
ISO1996-1 : 2003 EDTN 2 ISO1996-1 : 2003 EDTN 2. ISO1996-1 : 2003 Acoustics- Description, measurement and assessment of environmental noise-. Part 1: Basic quantities and assessment procedures
BS EN 60252-2:2003 BS EN 60252-2:2003. A.C. motor capacitors. Motor start capacitors
ISO4091 : 2003 EDTN 3 ISO4091 : 2003 EDTN 3. ISO4091 : 2003 Road vehicles-Connectors for electrical connections between towing vehicles and trailers-Test methods and general performance requirements
ISO15732 : 2003 EDTN 1 ISO15732 : 2003 EDTN 1. ISO15732 : 2003 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness at room temperature by single edge precracked beam (SEPB) method
BS EN ISO 16091:2002 BS EN ISO 16091:2002. Space systems. Integrated logistic support
ISO4716 : 2002 EDTN 2 ISO4716 : 2002 EDTN 2. ISO4716 : 2002 Oil of vetiver [Vetiveria zizanioides (L.) Nash]
ISO9842 : 2003 EDTN 2 ISO9842 : 2003 EDTN 2. ISO9842 :2003 Oil of rose (Rosa damascena P. Miller)
ISO15765-1 : 2004 EDTN.1 ISO15765-1 : 2004 EDTN.1. ISO15765-1 : 2004 Road vehicles - Diagnostics on Controller Area Networks (CAN) -. Part 1: General information
ISO/IEC15045-1 : 2004 EDTN 1 ISO/IEC15045-1 : 2004 EDTN 1. ISO/IEC15045 : 2004 Information technology - Home Electronic System (HES). Part 1: A Residential gateway model for Home Electronic System
ISO15764 : 2004 EDTN 1 ISO15764 : 2004 EDTN 1 . ISO15764 : 2004 Road vehicles - Extended data link security
BS EN 13794:2002 BS EN 13794:2002. Respiratory protective devices. Self-contained closed-circuit breathing apparatus for escape. Requirements, testing, marking
04/19972953 DC 04/19972953 DC. BS IEC 60050-612. International Electrotechnical Vocabulary. Part 612. Electric power system. Generation
ISO4106 : 2004 EDTN3 ISO4106 : 2004 EDTN3. ISO4106 : 2004 Motorcycles - Engine test code - Net power
PD IEC/TR 61400-24:2002 PD IEC/TR 61400-24:2002. Wind turbine generator systems. Lightning protection
BS EN 61400-21:2002 BS EN 61400-21:2002. Wind turbine generator systems. Measurement and assessment of power quality characteristics of grid connected wind turbines
BS 7971-7:2003 BS 7971-7:2003. Protective clothing and equipment for use in violent situations and in training. Slash resistant gloves. Requirements and test methods
BS 7971-8:2003 BS 7971-8:2003. Protective clothing and equipment for use in violent situations and in training. Blunt trauma torso, shoulder, abdomen and genital protectors. Requirements and test methods
BS 7971-4:2002 BS 7971-4:2002. Protective clothing and equipment for use in violent situations and in training. Limb protectors. Requirements and test methods
ISO3732 : 2003 EDTN 4 ISO3732 : 2003 EDTN 4. ISO3732 : 2003 Road vehicles - Electrical connections between towing and towed vehicles with 12V systems - 7 pole connector type 12 S (supplementary)
ISO3731 : 2003 EDTN 4 ISO3731 : 2003 EDTN 4. ISO3731 : 2003 Road vehicles - Connectors for the elctrical connection of towing and towed vehicles - 7 pole connector type 24 S (supplementary)for vehicles with 24 V nominal supply voltage
ISO16794 : 2003 EDTN 1 ISO16794 : 2003 EDTN 1. ISO16794 : 2003 Nuclear energy- Nuclear fuel technology- Determination of carbon compounds in uranium hexafluoride
ISO10303-518 : 2002 EDTN 1 ISO10303-518 : 2002 EDTN 1. ISO10303-518 : 2002 Industrial automation systems and integration- Product data representation and exchange. Part 518 : Application Interpreted Construct: Mechanical design shaded representation
ISO7638-2 : 2003 EDTN 2 ISO7638-2 : 2003 EDTN 2. ISO7638-2 : 2003 Road vehicles- Electrical connectors for braking systems-. Connectors for 12 V nominal supply voltage
ISO7638-1 : 2003 EDTN 2 ISO7638-1 : 2003 EDTN 2. ISO7638-1 : 2003 Road vehicles- Electrical connectors for braking systems-. Connectors for 24 V nominal supply voltage
ISO1185 : 2003 EDTN 3 ISO1185 : 2003 EDTN 3. ISO1185 : 2003 Road vehicles - Connectors for the electrical connection of towing and towed vahicles - 7-pole connectors type 24 N (normal) for vehicles with 24 V nominal supply voltage
BS EN 61747-6:2004 BS EN 61747-6:2004. Liquid crystal and solid-state display devices. Measuring methods for liquid crystal modules. Transmissive type
ISO14594 : 2003 EDTN 1 ISO14594 : 2003 EDTN 1. ISO14594 : 2003 Electron probe microanalysis- Instrumental specification
BS EN 13920-1:2003 BS EN 13920-1:2003. Aluminium and aluminium alloys. Scrap. General requirements, sampling and tests
ISO7452 : 2002 EDTN.2 ISO7452 : 2002 EDTN.2. ISO7452 : 2002 Hot-Rolled structural steel plates - Tolerances on dimensions and shape
ISO17637 : 2003 EDTN 1 ISO17637 : 2003 EDTN 1. ISO17637 : 2003 Non-destructive examination of fusion welds- Visual examination of fusion-welded joints
ISO4720 : 2002 EDTN 2 ISO4720 : 2002 EDTN 2. ISO4720 : 2002 Essential oils - Nomenclature
ISO16133 : 2004 EDTN.1 ISO16133 : 2004 EDTN.1. ISO16133 : 2004 Soil quality – Guidance on the establishment and maintenance of monitoring programmes
BS EN 13595-4:2002 BS EN 13595-4:2002. Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits. Test methods for the determination of impact cut resistance
BS EN 13595-3:2002 BS EN 13595-3:2002. Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits. Test method for determination of burst strength
BS EN 13595-2:2002 BS EN 13595-2:2002. Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits. Test method for determination of impact abrasion resistance
BS EN ISO 8318:2002 BS EN ISO 8318:2002. Packaging. Complete, filled transport packages and unit loads. Sinusoidal vibration tests using a variable frequency
BS EN ISO 2873:2002 BS EN ISO 2873:2002. Packaging. Complete, filled transport packages and unit loads. Low pressure test
BS EN ISO 2875:2002 BS EN ISO 2875:2002. Packaging. Complete, filled transport packages and unit loads. Water-spray test
BS EN ISO 2247:2002 BS EN ISO 2247:2002. Packaging. Complete, filled transport packages and unit loads. Vibration tests at fixed low frequency
BS EN ISO 2244:2002 BS EN ISO 2244:2002. Packaging. Complete, filled transport packages and unit loads. Horizontal impact tests
BS EN ISO 2234:2002 BS EN ISO 2234:2002. Packaging. Complete, filled transport packages and unit loads. Stacking tests using a static load
WD/ISO10993-12 : 2002 EDTN 2 WD/ISO10993-12 : 2002 EDTN 2. ISO10993-12 : 2002 Biological evaluation of medical devices. Part 12: Sample preparation and reference materials
BS EN 60746-1:2003 BS EN 60746-1:2003. Expression of performance of electrochemical analyzers. General
BS EN 60216-3:2002 BS EN 60216-3:2002. Electrical insulating materials. Thermal endurance properties. Instructions for calculating thermal endurance characteristics
BS 598-112:2004 BS 598-112:2004. Sampling and examination of bituminous mixtures for roads and other paved areas. Method for the use of road surface hardness probe
BS 8424:2004 BS 8424:2004. Building hardware. Pull handles. Requirements and test methods
BS 6400-1:2002 BS 6400-1:2002. Specification for installation of domestic-sized gas meters maximum rated capacity not exceeding 6 m3/h (2nd and 3rd family gases). Low pressure (2nd family gases)
ISO12076 : 2002 EDTN 1 (R08) ISO12076 : 2002 EDTN 1 (R08). ISO12076 : 2002 Steel wire ropes- Determination of actual modulus of elasticity
ISO/TR15599 : 2002 EDTN 1 ISO/TR15599 : 2002 EDTN 1. ISO15599 : 2002 Dentistry- Digital codification of dental laboratroy procedures
BS EN 50151:2003 BS EN 50151:2003. Railway applications. Fixed installations. Electric traction. Special requirements for composite insulators
BS EN 62011-1:2002 BS EN 62011-1:2002. Insulating materials. Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes. Definitions, designations and general requirements
BS EN 61280-2-8:2003 BS EN 61280-2-8:2003. Fibre optic communication subsystem basic test procedures. Test procedures for digital systems. Determination of low BER using Q-factor measurements
BS ISO/IEC 15476-2:2002 BS ISO/IEC 15476-2:2002. Information technology. CDIF semantic metamodel. Common
BS 7971-3:2002 BS 7971-3:2002. Protective clothing and equipment for use in violent situations and in training. Personal defence shields. Requirements and test methods
ISO17492 : 2003 EDTN 1 ISO17492 : 2003 EDTN 1. ISO17492 : 2003 Clothing for protection against heat and flame- Determination of heat transmission on exposure to both flame and radiant heat
WD/ISO/TS16071 : 2003 EDTN 1 WD/ISO/TS16071 : 2003 EDTN 1. ISO/TS16071 : 2003 Ergonomics of human-system interaction Guidance on accessibility for human-computer interfaces
BS EN 60749-5:2003 BS EN 60749-5:2003. Semiconductor devices. Mechanical and climatic test methods. Steady-state temperature humidity bias life test
02/564997 DC 02/564997 DC. BS ISO 16265. Water quality. Determination of MBAS index. Method by flow analysis (CFA and FIA)
BS EN 60603-7-1:2002 BS EN 60603-7-1:2002. Connectors for frequencies below 3 MHz for use with printed boards. Detail specification for 8-way, shielded free and fixed connectors with common mating features, with assessed quality
BS EN 60684-3-209:2003 BS EN 60684-3-209:2003. Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Heat-shrinkable polyolefin sleeving, general purpose, flame retarded, shrink ratio 2:1. Part 3: Heat-shrinkable polyolefin sleeving, general purpose, flame retarded,shrink ratio 2:1
WD/ISO16630 : 2003 EDTN 1 WD/ISO16630 : 2003 EDTN 1. ISO16630 : 2003 Metallic materials- Method of hole expanding test
BS EN ISO 14539:2001 BS EN ISO 14539:2001. Manipulating industrial robots. Object handling with grasp-type grippers. Vocabulary and presentation of characteristics
WD/ISO11193-1 : 2002 EDTN 1 WD/ISO11193-1 : 2002 EDTN 1. ISO11193-1 : 2002 Single-use medical examination gloves. Part 1: Specification for gloves made from rubber latex or rubber solution
BS EN 13201-4:2003 BS EN 13201-4:2003. Road lighting. Methods of measuring lighting performance
BS EN 13201-2:2003 BS EN 13201-2:2003. Road lighting. Performance requirements
ISO6182-1 : 2004 EDTN2 ISO6182-1 : 2004 EDTN2. ISO 6182-1 Fire protection - Automatic sprinkler systems. Part 1: Requirements and test methods for sprinklers
DD ISO/TS 16628:2003 DD ISO/TS 16628:2003. Tracheobronchial tubes. Recommendations for size designation and labelling
ISO11992-1 : 2003 EDTN 2 ISO11992-1 : 2003 EDTN 2. ISO11992-1 : 2003 Road vehicles- Interchange of digital information on electrical connections between towing and towed vehicles. Part 1: Physical and data-link layers
WD/ISO6597 : 2002 EDTN 3 WD/ISO6597 : 2002 EDTN 3. ISO6597 : 2002 Road vehicles- Hydraulic braking systems- Measurement of braking performance
ISO16845 : 2004 EDTN.1 ISO16845 : 2004 EDTN.1. ISO16845 : 2004 Road vehicles - Controller area network (CAN) - Conformance test plan
ISO14132-4 : 2002 EDTN 1 ISO14132-4 : 2002 EDTN 1. ISO14132-4 : 2002 Optics and optical instruments- Vocabulary for telescopic systems. Part 4: Terms for astronomical telescopes and alphabetic index of terms in ISO 14132
ISO14132-3 : 2002 EDTN 1 ISO14132-3 : 2002 EDTN 1. ISO14132-3 : 2002 Optics and optical instruments- Vocabulary for telescopic systems. Part 3: Terms for telescopic sights
ISO14132-2 : 2002 EDTN 1 ISO14132-2 : 2002 EDTN 1. ISO14132-2 : 2002 Optics and optical instruments- Vocabulary for telescopic systems. Part 2: Terms for binoculars, monoculars and spotting scopes
BS EN 61952:2003
BS EN 12258-3:2003 BS EN 12258-3:2003. Aluminium and aluminium alloys. Terms and definitions. Scrap
ISO15782-1 : 2003 EDTN 1 ISO15782-1 : 2003 EDTN 1. ISO15782-1 : 2003 Certficate Management for Financial services. Part 1: Public Key Certificates
BS EN 13538-3:2002 BS EN 13538-3:2002. Determination of dimensional characteristics of sleeping bags. Volume under load and easiness of packing
BS EN 13538-2:2002 BS EN 13538-2:2002. Determination of dimensional characteristics of sleeping bags. Thickness and elastic recovery
03/106720 DC 03/106720 DC. BS EN 14676. Leather. Chemical tests. Determination of volatile matter
BS EN 13540:2002 BS EN 13540:2002. Leather. Physical and mechanical tests. Determination of heat resistance of patent leather
ISO3475 : 2002 EDTN 2 ISO3475 : 2002 EDTN 2. ISO3475 : 2002 Oil of aniseed (Anysum Pimpinella)
ISO8901 : 2003 EDTN 2 ISO8901 : 2003 EDTN 2. ISO8901 : 2003 Oil of bitter orange petitgrain (Citrus aurantium Linnaeus ssp. aurantium)
ISO8686-2 : 2004 (R08) EDTN1 ISO8686-2 : 2004 (R08) EDTN1 . ISO8686-2 Cranes - Design principles for loads and load combinations -. Mobile cranes
ISO/IEC14496-5 AMD1(12/02)CD-ROM ISO/IEC14496-5 AMD1(12/02)CD-ROM. ISO/IEC14496-5 : 2001 Information technology- Coding of audio visual objects. Part 5: Reference software. Amendment1: Reference software extensions
BS EN 61968-1:2004 BS EN 61968-1:2004. Application integration at electric utilities. System interfaces for distribution management. Interface architecture and general requirements
PD IEC TR 61850-1:2003 PD IEC TR 61850-1:2003. Communication networks and systems in substations. Introduction and overview. Part 1: Introduction and overview
BS EN 50216-7:2002 BS EN 50216-7:2002. Power transformers and reactor fittings. Electric pumps for transformer oil
PD ISO/IEC TR 15446:2004 PD ISO/IEC TR 15446:2004. Information technology. Security techniques. Guide for the production of protection profiles and security targets
PD IEC TR 62059-21:2002 PD IEC TR 62059-21:2002. Electricity metering equipment. Dependability. Collection of meter dependability data from the field
BS EN 60122-3:2001 BS EN 60122-3:2001. Quartz crystal units of assessed quality. Standard outlines and lead connections
ISO14329 : 2003 (edtn1) HEADER ISO14329 : 2003 (edtn1) HEADER. ISO14329 : 2003 Welding - Destructive testing of welds - Failure types and geometric measurements for resistance spot, seam, and projection welds
BS EN 13274-7:2002 BS EN 13274-7:2002. Respiratory protective devices. Methods of test. Determination of particle filter penetration
BS EN 61823:2003 BS EN 61823:2003. Electrical installations for lighting and beaconing of aerodromes. AGL series transformers
03/310514 DC 03/310514 DC. EN 4400-4. Aerospace series. Aluminium and aluminium and magnesium alloys. Techinical specification. Part 4. Aluminium and aluminium alloy tube
BS EN 62041:2003 BS EN 62041:2003. Power transformers, power supply units, reactors and similar products. EMC requirements
BS EN 61982-2:2002 BS EN 61982-2:2002. Secondary batteries for the propulsion of electric road vehicles. Dynamic discharge performance test and dynamic endurance test
ISO14341 : 2002 EDTN 1 ISO14341 : 2002 EDTN 1. ISO14341 : 2002 Welding consumables- Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification
ISO14174 : 2004 EDTN1 ISO14174 : 2004 EDTN1. ISO14174 : 2004 Welding consumables -- Fluxes for submerged arc welding -- Classification
ISO14171 : 2002 EDTN 1 ISO14171 : 2002 EDTN 1. ISO14171 : 2002 Welding consumables- Wire electrodes and wire-flux combinations for submerged arc welding of non alloy and fine grain steels - Classification
DD 7995:2003 DD 7995:2003. Specification for temporary access platforms. Performance and design requirements, and test methods
ISO3523 : 2002 EDTN 2 ISO3523 : 2002 EDTN 2. ISO3523 : 2002 Oil of Cananga [Cananga odorata (Lamarck) Hook.f.et Thomson, forma macrophylla]
BS EN 61029-2-8:2003 BS EN 61029-2-8:2003. Safety of transportable motor-operated tools. Particular requirements for single spindle vertical moulders
BS EN 61029-2-5:2002 BS EN 61029-2-5:2002. Safety of transportable motor-operated tools. Particular requirements for band saws
BS ISO 16329:2003 BS ISO 16329:2003. Ships and marine technology. Heading control systems for high-speed craft
ISO3760 : 2002 EDTN 2 ISO3760 : 2002 EDTN 2. ISO3760 : 2002 Oil of celery seed (Apium graveolens L.)
ISO3757 : 2002 EDTN 2 ISO3757 : 2002 EDTN 2. ISO3757 : 2002 Oil of patchouli (Pogostemon cablin (Blanco) Benth.)
ISO16143-1 : 2004 EDTN.1 ISO16143-1 : 2004 EDTN.1. ISO16143-1 : 2004 Stainless steels for general purposes. Part 1: Flat products
ISO3809 : 2004 EDTN 3 ISO3809 : 2004 EDTN 3 . ISO3809 : 2004 Oil of lime, Mexico [Citrus aurantiifolia (Christmann) Swingle] obtained by mechanical means
ISO3524 : 2003 EDTN 2 ISO3524 : 2003 EDTN 2. ISO3524 : 2003 Oil of cinnamon leaf
ISO16391 : 2002 EDTN 1 ISO16391 : 2002 EDTN 1. ISO16391 : 2002 Aids for ostomy and incontinence- Irrigation sets- Requirements and test methods
BS EN 61821:2003 BS EN 61821:2003. Electrical installation for lighting and beaconing of aerodromes. Maintenance of aeronautical ground lighting constant current series circuits
BS EN 61822:2003 BS EN 61822:2003. Electrical installations for lighting and beaconing of aerodromes. Constant current regulators
DD IEC/PAS 60044-5:2002 DD IEC/PAS 60044-5:2002. Instrument transformers. Capacitor voltage transformers
ISO11119-3 : 2002 EDTN 1 ISO11119-3 : 2002 EDTN 1. ISO11119-3 : 2002 Gas cylinders of composite material - Specification and test methods. Fully-wrapped fibre reinforced composite gas cylinders with non-metallic and non-load sharing metal liners
BS EN 61076-4-108:2002 BS EN 61076-4-108:2002. Connectors for electronic equipment. Printed board connectors with assessed quality. Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1
ISO/IEC7816-11 : 2004 EDTN.1 ISO/IEC7816-11 : 2004 EDTN.1. ISO/IEC7816-11 : 2004 Identification cards - Integrated circuit cards. Part 11: Personal verification through biometric methods
BS ISO 6621-2:2003 BS ISO 6621-2:2003. Internal combustion engines. Piston rings. Inspection measuring principles
BS ISO 6622-2:2003 BS ISO 6622-2:2003. Internal combustion engines. Piston rings. Rectangular rings made of steel
BS ISO 6624-4:2003 BS ISO 6624-4:2003. Internal combustion engines. Piston rings. Half keystone rings made of steel
BS ISO 6624-2:2003 BS ISO 6624-2:2003. Internal combustion engines. Piston rings. Half keystone rings made of cast iron
BS EN 50274:2002 BS EN 50274:2002. Low-voltage switchgear and controlgear assemblies. Protection against electric shock. Protection against unintentional direct contact with hazardous live parts
BS ISO 15829:2004 BS ISO 15829:2004. Road vehicles. Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation
BS CECC 96601:2002 BS CECC 96601:2002. Blank detail specification. Slide switches
BS EN 196-9:2003 BS EN 196-9:2003. Methods of testing cement. Heat of hydration. Semi-adiabatic method
BS EN 196-8:2003 BS EN 196-8:2003. Methods of testing cement. Heat of hydration. Solution method
BS ISO 2303:2003 BS ISO 2303:2003. Isoprene rubber (IR). Non-oil-extended, solution-polymerized types. Evaluation procedure
BS EN 13538-1:2002 BS EN 13538-1:2002. Determination of dimensional characteristics of sleeping bags. Internal dimensions
ISO13602-1 : 2002 EDTN 1 ISO13602-1 : 2002 EDTN 1. ISO13602 : 2002 Technical energy systems- Methods for analysis. Part1 : General
BS EN 12845:2003 BS EN 12845:2003. Fixed firefighting systems. Automatic sprinkler systems. Design, installation and maintenance
BS 7894:2003 BS 7894:2003. MV impregnated paper insulated distribution cables of rated voltages of 3.8/6.6 kV to 19/33 kV
WD/ISO/IEC15444-4 : 2002 EDTN 1 WD/ISO/IEC15444-4 : 2002 EDTN 1. ISO/IEC15444-4 : 2002 Information technology- JPEG 2000 image coding system. Part 4: Conformance testing
ISO8458-3 : 2002 EDTN.2 ISO8458-3 : 2002 EDTN.2. ISO8458-3 : 2002 Steel wire for mechanical springs. Part 3: Oil hardened and tempered wire
ISO8458-2 : 2002 EDTN 2 ISO8458-2 : 2002 EDTN 2. ISO8458-2 : 2002 Specification for steel wire for mechanical springs. Part 2: Patented cold drawn unalloyed steel wire
BS EN 60335-2-99:2003 BS EN 60335-2-99:2003. Specification for safety of household and similar electrical appliances. Particular requirements for commercial electric hoods
BS EN 61603-6:2002 BS EN 61603-6:2002. Transmission of audio and/or video and related signals using infra-red radiation. Video and audio-visual signals
DC03/100280 DC03/100280. Draft British Standard Draft BSIEC62008 Performance characteristics and calibration methods for digital data acquisition systems and relevant software
ISO11799 : 2003 EDTN 1 ISO11799 : 2003 EDTN 1. ISO11799 : 2003 Information and documentation - Storage requirements for archive and library materials
ISO8458-1 : 2002 EDTN 2 ISO8458-1 : 2002 EDTN 2. ISO8458-1 : 2002 Specification for steel wire for mechanical springs. Part 1: General requirements
PD CR R210-010:2002 PD CR R210-010:2002. Electromagnetic compatibility. Emission measurements in fully anechoic chambers
ISO15531-1 : 2004 EDTN.1 ISO15531-1 : 2004 EDTN.1. ISO15531-1 : 2004 Industrial automation systems and integration - Industrial manufacturing management data. Part 1: General overview
ISO15174 : 2002 EDTN 1 ISO15174 : 2002 EDTN 1. ISO15174 : 2002 Microbial contaminants- Determination of total milk-clotting activity
ISO15800 : 2003 EDTN 1 ISO15800 : 2003 EDTN 1. ISO15800 : 2003 Soil quality - Characterization of soil with respect to human exposure
BS EN 50144-2-13:2002 BS EN 50144-2-13:2002. Safety of hand-held electric motor operated tools. Particular requirements for chain saws
WD/ISO7396-1 : 2002 EDTN 1 WD/ISO7396-1 : 2002 EDTN 1. ISO7396-1 : 2002 Medical gas pipeline systems. Part 1: Pipelines for compressed medical gases and vacuum
ISO14960 : 2004 EDTN1 ISO14960 : 2004 EDTN1 . ISO14960 : 2004 Tubeless tyres - Valves and components - Test Methods
BS EN 50243:2002 BS EN 50243:2002. Outdoor bushings for 24 kV and 36 kV and for 5 kA and 8 kA, for liquid filled transformers
BS 7533-8:2003 BS 7533-8:2003. Pavements constructed with clay, natural stone or concrete pavers. Guide for the structural design of lightly trafficked pavements of precast concrete flags and natural stone flags
BS EN 60052:2002 BS EN 60052:2002. Voltage measurement by means of standard air gaps
BS EN 61534-1:2003 BS EN 61534-1:2003. Powertrack systems. General requirements
ISO15384 : 2003 EDTN 1 ISO15384 : 2003 EDTN 1. ISO15384 : 2003 Protective clothing for fire fighters- Laboratory test methods and performance requirements for wildland firefighting
BS EN 388:2003 BS EN 388:2003. Protective gloves against mechanical risks
BS EN 12332-2:2002 BS EN 12332-2:2002. Rubber- or plastics-coated fabrics. Determination of bursting strength. Hydraulic method
BS EN 13809:2003 BS EN 13809:2003. Tourism services. Travel agencies and tour operators. Terminology
DD ENV 14383-2:2003 DD ENV 14383-2:2003. Prevention of crime. Urban planning and design. Urban planning
WD/ISO15194 : 2002 EDTN 1 WD/ISO15194 : 2002 EDTN 1. ISO15194 : 2002 In vitro diagnostic systems - Measurement of quantities in samples of biological origin - Description of reference materials
WD/ISO15193 : 2002 EDTN.1 WD/ISO15193 : 2002 EDTN.1. ISO15193 : 2002 In vitro diagnostic systems - Measurement of quantities in samples of biological origin - Presentation of reference measurement procedures
BS EN 60454-3-19:2003 BS EN 60454-3-19:2003. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials. Tapes made from various backing materials with pressure-sensitive adhesive on both sides. Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on both sides
BS EN 60454-3-18:2003 BS EN 60454-3-18:2003. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials
BS EN 50238:2003 BS EN 50238:2003. Railway applications. Compatibility between rolling stock and train detection systems
ISO10196 : 2003 EDTN 2 ISO10196 : 2003 EDTN 2. ISO10196 : 2003 Document imaging applications- Recommendations for the creation of original documents
BS EN 12094-1:2003 BS EN 12094-1:2003. Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for electrical automatic control and delay devices
BS EN 12405:2002 BS EN 12405:2002. Gas meters. Gas-volume electronic conversion devices
ISO11393-4 : 2003 EDTN 1 ISO11393-4 : 2003 EDTN 1. ISO11393-4 : 2003 Protective clothing for users of hand-held chain saws. Part 4: Test methods and performance requirements for chain-saw protective gloves
04/19985115 DC 04/19985115 DC. BS ISO 15172. Road vehicles. Wheels. Nut seat strength tests
BS EN 61000-2-12:2003 BS EN 61000-2-12:2003. Electromagnetic compatibility (EMC). Environment. Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems
BS 903-0:2003 BS 903-0:2003. Physical testing of rubber. General
WD/ISO7718 : 2003 EDTN 2 WD/ISO7718 : 2003 EDTN 2. ISO7718 : 2003 Aircraft- Main deck passenger doors- Interface requirements for connection with passenger-boarding bridge or transfer vehicle
ISO15685 : 2004 EDTN.1 ISO15685 : 2004 EDTN.1. ISO15685 : 2004 Soil quality - Determination of potential nitrification and inhibitiob of nitrification - Rapid test by ammonium oxide
BS EN 13537:2002 BS EN 13537:2002. Requirements for sleeping bags
04/19985587 DC 04/19985587 DC. BS EN 894-4. Safety of machinery. Ergonomics requirements for the design of displays and control actuators. Part 4. Location and arrangement of displays and control actuators
WD/ISO9445 : 2002 EDTN 2 WD/ISO9445 : 2002 EDTN 2. ISO9445 : 2002 Continuously cold-rolled stainless steel narrow strip, wide strip, plate/shee and cut lengths- Tolerances on dimensions and form
WD/ISO9444 : 2002 EDTN 2 WD/ISO9444 : 2002 EDTN 2. ISO9444 : 2002 Hot rolled wide strip and sheet of stainless steel- Tolerances on dimensions and form
ISO6182-7 : 2004 EDTN.1 ISO6182-7 : 2004 EDTN.1. ISO6182-7 : 2004 Fire protection - Automatic sprinkler systems. Part 7: Requirements and test methods for early suppression fast response (ESFR) sprinklers
ISO13584-24 : 2003 EDTN 1 ISO13584-24 : 2003 EDTN 1. ISO13584-24 : 2003 EDTN 1 Industrial automation systems - Parts Library. Part 24 : Logical model of supplier library
ISO12710 : 2002 EDTN 1 ISO12710 : 2002 EDTN 1. ISO12710 : 2002 Non-destructive testing- Ultrasonic inspection- Evaluating electronic characteristics of ultrasonic test instruments
ISO13641-2 : 2003 EDTN 1 ISO13641-2 : 2003 EDTN 1. ISO13641-2 : 2003 Water quality- Determination of inhibition of activity of anaerobic bacteria. Part 2: Test at low biomass concentrations
ISO13625 : 2002 EDTN 1 ISO13625 : 2002 EDTN 1. ISO13625 : 2002 Petroleum & Natural Gas industries- Drilling & Production Equipment- Desing,Rating & Testing of Marine Drilling Riser Couplings
ISO13626 : 2003 EDTN 1 ISO13626 : 2003 EDTN 1. ISO13626 : 2003 Petroleum and natural gas industries - Drilling and production equipment - Drilling and well servicing structures - Specification
WD/ISO14607 : 2002 EDTN 1 WD/ISO14607 : 2002 EDTN 1. ISO14607 : 2002 Implants for surgery- Mammary implants
ISO/TS12104 : 2003 EDTN1 ISO/TS12104 : 2003 EDTN1. ISO/TS12104 : 2003 Road vehicles - Shift pattern of mechanical gearboxes with power-assisted gear change
WD/ISO/TS14167 : 2003 EDTN 1 WD/ISO/TS14167 : 2003 EDTN 1. ISO/TS14167 : 2003 Gas analysis- General quality assurance aspects in the use and preparation of reference gas mixtures- Guidelines
04/19987805 DC 04/19987805 DC. BS ISO 14505-1. Ergonomics of the thermal environment. Evaluation of thermal environment in vehicles. Part 1. Principles and methods for assessment of thermal stress
BS EN 61192-2:2003 BS EN 61192-2:2003. Workmanship requirements for soldered electronic assemblies. Surface-mount assemblies
BS EN 13594:2002 BS EN 13594:2002. Protective gloves for professional motorcycle riders. Requirements and test methods
WD/ISO3601-1 : 2002 EDTN 3 WD/ISO3601-1 : 2002 EDTN 3. ISO3601-1 : 2002 Fluid systems- Sealing devices- O-rings. Part 1: Inside diameters, cross-sections tolerances and size identification code
ISO14256-1 : 2003 EDTN 1 ISO14256-1 : 2003 EDTN 1. ISO14256-1 : 2003 Soil quality- Determination of nitrate, nitrite and ammonium in field moist soils by extraction with potassium chloride solution. Part 1: Manual method
BS 6656:2002 BS 6656:2002. Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation. Guide
ISO128-1 : 2003 EDTN 1 ISO128-1 : 2003 EDTN 1. ISO128-1 : 2003 Technical drawings- General principles of presentation-. Part 1: Basic conventions- Lines
ISO13897 : 2003 (R08) EDTN 1 ISO13897 : 2003 (R08) EDTN 1. ISO13897 : 2003 Dental amalgam capsules
PD IEC TR 62248:2002 PD IEC TR 62248:2002. Approaches to conformance and certification testing for design automation standards
ISO13520 : 2002 EDTN 1 ISO13520 : 2002 EDTN 1. ISO13520 : 2002 Standard practice for the estimation of ferrite content in austenitic stainless steel castings
ISO2173 : 2003 EDTN 2 ISO2173 : 2003 EDTN 2. ISO2173 : 2003 Fruit and vegetable products - Determination of soluble solids content -Refractometric method
BS EN 527-2:2002 BS EN 527-2:2002. Office furniture. Work tables and desks. Mechanical safety requirements
BS EN 61029-2-9:2002 BS EN 61029-2-9:2002. Safety of transportable motor-operated tools. Particular requirements for mitre saws
BS 7870-7.1:2003 BS 7870-7.1:2003. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for power cables having rated voltages of 3.8/6.6 kV and 6.35/11 kV with special fire performance for use in power stations. Single core and 3-core cables with halogenated materials and with aluminium or steel wire armouring
03/108782 DC 03/108782 DC. EN ISO 1942. Dental vocabulary
ISO13559 : 2002 EDTN.1 ISO13559 : 2002 EDTN.1. ISO13559 : 2002 Butter, fermented milks and fresh cheese - Enumeration of contaminating microorganisms - Colony count technique at 30C
BS EN 13830:2003 BS EN 13830:2003. Curtain walling. Product standard
BS EN 13595-1:2002 BS EN 13595-1:2002. Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits. General requirements
BS EN 1008:2002 BS EN 1008:2002. Mixing water for concrete. Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
BS EN 13698-1:2003 BS EN 13698-1:2003. Pallet production specification. Construction specification for 800 mm x 1200 mm flat wooden pallets
BS EN 61192-1:2003 BS EN 61192-1:2003. Workmanship requirements for soldered electronic assemblies. General
ISO2560 : 2002 EDTN.2 ISO2560 : 2002 EDTN.2. ISO2560 : 2002 Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification
WD/ISO13958 : 2002 EDTN 1 WD/ISO13958 : 2002 EDTN 1. ISO13958 : 2002 Concentrates for haemodialysis or haemodiafiltration
WD/ISO13959 : 2002 EDTN 1 WD/ISO13959 : 2002 EDTN 1. ISO13959 : 2002 Water for haemodialysis and related therapies
ISO13960 : 2003 EDTN1 ISO13960 : 2003 EDTN1. ISO13960 : 2003 Cardiovascular implants and artificial organs- Plasmafilters
WD/ISO4952 : 2003 EDTN 2 WD/ISO4952 : 2003 EDTN 2. ISO4952 : 2003 Structural steels with improved atmospheric corrosion resistance
ISO2928 : 2003 EDTN 3 (R08) ISO2928 : 2003 EDTN 3 (R08). ISO2928 : 2003 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase) and natural gas up to 25 bar (2,5 MPa)- Specification
02/105261 DC 02/105261 DC. BS EN 1337-8. Structural bearings. Guided bearings and restrained bearings
BS EN 13789:2002 BS EN 13789:2002. Industrial valves. Cast iron globe valves
ISO7358 : 2002 EDTN 1 ISO7358 : 2002 EDTN 1. ISO7358 : 2002 Oils of bergamot, lemon, citron and lime, fully or partially reduced in bergaptene Determination of bergaptene content by high performance liquid chromatography
ISO8898 : 2003 EDTN 1 ISO8898 : 2003 EDTN 1. ISO8898 : 2003 Oil of mandarin petitgrain (Citrus reticulata Blanco)
ISO10972-3 : 2003 EDTN 1 ISO10972-3 : 2003 EDTN 1. ISO10972-3 : 2003 Cranes- Requirements for mechanisms. Part 3: Tower cranes
ISO11835 : 2002 EDTN 2 ISO11835 : 2002 EDTN 2. ISO11835 : 2002 Road vehicles- Motor vehicles with antilock braking systems- Measurement of braking performance
ISO10303-204 : 2002 EDTN 1 ISO10303-204 : 2002 EDTN 1. ISO10303-204 : 2002 Industrial automation systems and integration- Product data representation and exchange. Part 204: Application protocol- Mechanical design using boundary representation
ISO501 : 2003 EDTN 3 ISO501 : 2003 EDTN 3. ISO501 : 2003 Coal - Determination of the crucible swelling number
ISO115 : 2003 EDTN 1 ISO115 : 2003 EDTN 1. ISO115 : 2003 Unalloyed aluminium ingots for remelting- classification and composition
ISO15763 : 2002 EDTN 1 ISO15763 : 2002 EDTN 1. ISO15763 : 2002 Road vehicles - Alarm systems for buses and commercial vehicles of maximum authorized total mass greater than 3,5 t
BS EN 60335-2-103:2003 BS EN 60335-2-103:2003. Specification for safety of household and similar electrical appliances. Particular requirements for drives for gates, doors and windows. Particular requirements for drives for gates, doors and windows
DD 257-3:2003 DD 257-3:2003. Methods of analysis of wood preservatives and treated timber. Quantitative analysis of permethrin in solutions of wood preservatives in organic solvents
DD 257-5:2003 DD 257-5:2003. Methods of analysis of wood preservatives and treated timber. Determination of carboxylic acid type in zinc and copper carboxylate preservative solutions by gas chromatography
ISO10382 : 2002 EDTN 1 ISO10382 : 2002 EDTN 1. ISO10382 : 2002 Soil quality- Gas chromatographic determination of the contents of polychlorinated biphenyls (PCB) and organochloro pesticides (OCP)
ISO10464 : 2004 EDTN1 ISO10464 : 2004 EDTN1. ISO10464 : 2004 Gas cyclinders - Refillable welded steel cylinders for liquefied prtroleum gas (LPG) - Periodic inspection and testing
ISO8820-3 : 2002 EDTN 2 ISO8820-3 : 2002 EDTN 2. ISO8820-3 : 2002 Road vehicles- Fuse-links-. Part 3: Fuse-links with tabs (blade type)
ISO5692-1 : 2004 EDTN.1 (R08) ISO5692-1 : 2004 EDTN.1 (R08). ISO5692-1 : 2004 Agricultural vehicles - mechanical connections on towed vehicles-. Part 1: Dimensions for hitch-rings
BSISO/IEC15948 : 2004 (CD-ROM) BSISO/IEC15948 : 2004 (CD-ROM). BSISO/IEC15948 : 2004 Information technology - Computer Graphics and image processing - Portable Network Graphics (PNG) : Functional Specification
ISO9455-17 : 2002 EDTN 1 ISO9455-17 : 2002 EDTN 1. ISO9455-17 : 2002 Soft soldering fluxes- Test methods. Part 17 : Surface insulation resistance, comb test and electrochemical migration test of flux residues
ISO/IEC10589 : 2002 EDTN 2 ISO/IEC10589 : 2002 EDTN 2. ISO/IEC10589 : 2002 Information technology - Telecommunications and information exchange between systems - Intermediate system to Intermediate system intra-domain routeing information exchange protocol for use in conjunction with the protocol for providing the connectionless-mode Network Service (ISO/IEC 8473) - Second Edition
ISO/IECISP12062-6 : 2003 EDTN 1 ISO/IECISP12062-6 : 2003 EDTN 1. ISO/IECISP12062-6 : 2003 Information technology - International Standardized Profiles AMH2n - Message Handling Systems - Interpersonal Messaging. Part 6: AMH26- IPM requirements for Enhanced MS94 Access (P7)
ISO/IECISP12062-5 : 2003 EDTN 3 ISO/IECISP12062-5 : 2003 EDTN 3. ISO/IECISP12062-5 : 2003 Information technology - International Standardized Profiles AMH2n - Message Handling Systems - Interpersonal Messaging. Part 5: AMH24 - IPM requirements for enhanced MS access (P7)
ISO/IECISP12062-4 : 2003 EDTN 3 ISO/IECISP12062-4 : 2003 EDTN 3. ISO/IECISP12062-4 : 2003 Information technology - International Standardized Profiles AMH2n - Message Handling Systems - Interpersonal Messaging. Part 4: AMH23 and AMH25- IPM requirements for MTS access (P3) & MTS 94 Access (P3)
ISO/IECISP12062-3 : 2003 EDTN 3 ISO/IECISP12062-3 : 2003 EDTN 3. ISO/IECISP12062-3 : 2003 Information technology - International Standardized Profiles AMH2n - Message Handling Systems - Interpersonal Messaging. Part 3: AMH22- IPM requirements for message transfer (P1)
ISO/IECISP12062-2 : 2003 EDTN 3 ISO/IECISP12062-2 : 2003 EDTN 3. ISO/IECISP12062-2 : 2003 Information technology - International Standardized Profiles AMH2n - Message Handling Systems - Interpersonal Messaging. Part 2: AMH21- IPM content
ISO/IECISP12062-1 : 2003 EDTN 3 ISO/IECISP12062-1 : 2003 EDTN 3. ISO/IECISP12062-1 : 2003 Information technology- International Standardized Profiles AMH2n - Message Handling Systems- Interpersonal Messaging . Part 1: IPM MHS service support
BS 6203:2003 BS 6203:2003. Guide to fire characteristics and fire performance of expanded polystyrene materials (EPS and XPS) used in building applications
ISO4306-3 : 2003 (3RD EDTN) HEADER ISO4306-3 : 2003 (3RD EDTN) HEADER. ISO4306-3 : 2003 Cranes - Vocabulary. Tower cranes
ISO10691 : 2004 EDTN1 ISO10691 : 2004 EDTN1. ISO10691 : 2004 Gas cylinders - Refillable welded steel cylinders for liquefied petroleum gas (LPG) - Procedures for checking before, during and after filling
BS 644:2003 BS 644:2003. Timber windows. Factory assembled windows of various types. Specification
ISO/TR15801 : 2004 EDTN.1 ISO/TR15801 : 2004 EDTN.1. Electronic imaging - Information stored electronically - Recommendations for trustworthiness and reliability
BS 6375-1:2004 BS 6375-1:2004. Performance of windows and doors. Classification for weathertightness and guidance on selection and specification
ISO10426-2 : 2003 EDTN 1 ISO10426-2 : 2003 EDTN 1. ISO10426-2 : 2003 Petroleum and natural gas industries - Cements and materials for well cementing-. Part 2 : Testing of well cements
WD/ISOTS13571 : 2002 EDTN 1 WD/ISOTS13571 : 2002 EDTN 1. ISO/TS13571 : 2002 Fire hazard analysis- Life threat components of fire
BS EN 50144-2-16:2003 BS EN 50144-2-16:2003. Safety of hand-held electric motor operated tools. Particular requirements for tackers
BS EN 61922:2002 BS EN 61922:2002. High-frequency induction heating installations. Test methods for the determination of power output of the generator
BS 7923:2004 BS 7923:2004. Electric cables. Internal gas-pressure cables and accessories for alternating voltages up to and including 275 kV (Um = 300 kV). Requirements and test methods
ISO14132-1 : 2002 EDTN 1 ISO14132-1 : 2002 EDTN 1. ISO14132-1 : 2002 Optics and optical instruments- Vocabulary for telescopic systems. Part 1: General terms
BS 7977-1:2002 BS 7977-1:2002. Specification for safety and rational use of energy of domestic gas appliances. Radiant/convectors
ISO12106 : 2003 EDTN 1 ISO12106 : 2003 EDTN 1. ISO12106 : 2003 Metallic materials- Fatigue testing. Strain control axial fatigue method
ISO12135 : 2002 EDTN 1 ISO12135 : 2002 EDTN 1. ISO12135 : 2002 Metallic materials Unified method of test for the determination of quasistatic fracture toughness
ISO11228-1 : 2003 EDTN 1 ISO11228-1 : 2003 EDTN 1. ISO11228-1 : 2003 Ergonomics- Manual handling. Part 1: Lifting and carrying
BS 7922:2004 BS 7922:2004. Electric cables. Fluid-filled, paper- and PPL-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV (Um = 420 kV). Requirements and test methods
BS 8220-3:2004 BS 8220-3:2004. Guide for security of buildings against crime. Storage, industrial and distribution premises
BS G 257-3:2004 BS G 257-3:2004. Design of electromagnetic hazard protection of civil aircraft. Guide to clearance and testing
BS EN 12284:2003 BS EN 12284:2003. Refrigerating systems and heat pumps. Valves. Requirements, testing and marking
ISO12243 : 2003 (R08) EDTN 1 ISO12243 : 2003 (R08) EDTN 1. ISO12243 : 2003 Medical gloves made from natural rubber latex - Determination of water-extractable protein using the modified Lowry method
ISO10576-1 : 2003 EDTN 1 ISO10576-1 : 2003 EDTN 1. ISO10576-1 : 2003 Statistical methods- Guidelines for the evaluation of conformity with specified requirements. Part 1: General principles
ISO10381-4 : 2003 EDTN 1 ISO10381-4 : 2003 EDTN 1. ISO10381-4 : 2003 Soil quality- Sampling. Part 4: Guidance on the procedure for the investigation of natural and cultivated sites
ISO16797 : 2004 EDTN.1 ISO16797 : 2004 EDTN.1. ISO16797 : 2004 Nuclear energy - Soxhlet-mode chemical durability test - Application to vitrified matrixes for high-level radioactive waste
ISO6962 : 2004 EDTN2 ISO6962 : 2004 EDTN2. ISO6962 : 2004 Nuclear energy -- Standard method for testing the long-term alpha irradiation stability of matrices for solidification of high-level radioactive waste
BS ISO 5530-4:2002 BS ISO 5530-4:2002. Wheat flour (Triticum aestivum L.). Physical characteristics of doughs. Determination of rheological properties using an alveograph
ISO12795 : 2004 EDTN1 ISO12795 : 2004 EDTN1. ISO12795 : 2004 Nuclear fuel technology - Uranium dioxide powder and pellets - Determination of uranium and oxygen/uranium ratio by gravimetric method with impurity correction
BS EN 12280-2:2002 BS EN 12280-2:2002. Rubber- or plastics-coated fabrics. Accelerated ageing tests. Physical ageing: effect of light or weathering
BS EN 12280-3:2002 BS EN 12280-3:2002. Rubber- or plastics-coated fabrics. Accelerated ageing tests. Environmental ageing
BS EN 13579:2002 BS EN 13579:2002. Products and systems for the protection and repair of concrete structures. Test methods. Drying test for hydrophobic impregnation
BS EN 13581:2002 BS EN 13581:2002. Products and systems for the protection and repair of concrete structures. Test methods. Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress
BS EN 13578:2003 BS EN 13578:2003. Products and systems for the protection and repair of concrete structures. Test method. Compatibility on wet concrete
BS EN 13580:2002 BS EN 13580:2002. Products and systems for the protection and repair of concrete structures. Test methods. Water absorption and resistance to alkali for hydrophobic impregnations
BS EN 61076-3-103:2004 BS EN 61076-3-103:2004. Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Rectangular connectors. Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC)
BS ISO 6550-3:2002 BS ISO 6550-3:2002. Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. M10 glow-plugs
ISO12800 : 2003 (EDTN1) HEADER ISO12800 : 2003 (EDTN1) HEADER. ISO12800 : 2003 Nuclear energy - Fuel technology - Guide to the measurement of the specific
BS EN 60893-2:2004 BS EN 60893-2:2004. Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Methods of test
BS EN 50324-1:2002 BS EN 50324-1:2002. Piezoelectric properties of ceramic materials and components. Terms and definitions
BS ISO 16458:2004 BS ISO 16458:2004. Space systems. Unmanned spacecraft transportation. General requirements
BS ISO 14711:2003 BS ISO 14711:2003. Space systems. Unmanned mission operations concepts. Guidelines for defining and assessing concept products
BS ISO 14619:2003 BS ISO 14619:2003. Space systems. Space experiments. General requirements
BS ISO 14950:2004 BS ISO 14950:2004. Space systems. Unmanned spacecraft operability
BS EN 50324-2:2002 BS EN 50324-2:2002. Piezoelectric properties of ceramic materials and components. Methods of measurement. Low power
BS EN 50305:2002 BS EN 50305:2002. Railway applications. Railway rolling stock cables having special fire performance. Test methods
BS EN 60793-1-32:2003 BS EN 60793-1-32:2003. Optical fibres. Measurement methods and test procedures. Coating strippability
BS EN 13558:2003 BS EN 13558:2003. Specifications for impact modified extruded acrylic sheets for shower trays for domestic purposes
BS EN ISO 16330:2003 BS EN ISO 16330:2003. Reciprocating positive displacement pumps and pump units. Technical requirements
BS EN 13559:2003 BS EN 13559:2003. Specifications for impact modified coextruded ABS/Acrylic sheets for baths and shower trays for domestic purposes
BS EN 61290-10-1:2003 BS EN 61290-10-1:2003. Optical amplifiers. Test methods. Multichannel parameters. Pulse method using an optical switch and optical spectrum analyzer
BS 8451:2004 BS 8451:2004. Rubber hoses for gas welding, cutting and allied processes. High kink-resistant heavy duty welding hose (type H). Specification
BS EN 50326:2002 BS EN 50326:2002. Conductors for overhead lines. Characteristics of greases
BS EN ISO 13849-2:2003 BS EN ISO 13849-2:2003. Safety of machinery. Safety-related parts of control systems. Validation
BS EN 14103:2003 BS EN 14103:2003. Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of ester and linolenic acid methyl ester contents
BS EN 61000-2-2:2002 BS EN 61000-2-2:2002. Electromagnetic compatibility (EMC). Environment. Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
BS ISO 7004:2002 BS ISO 7004:2002. Photography. Industrial radiographic films. Determination of ISO speed, ISO average gradient and ISO gradients G2 and G4 when exposed to X- and gamma-radiation
BS ISO 17900:2002 BS ISO 17900:2002. Agricultural trailers. Balanced and semi-mounted trailers. Determination of payload, vertical static load and axle load
BS EN 13687-1:2002 BS EN 13687-1:2002. Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility. Freeze-thaw cycling with de-icing salt immersion
BS EN 13687-2:2002 BS EN 13687-2:2002. Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility. Thunder-shower cycling (thermal shock)
BS EN 13687-3:2002 BS EN 13687-3:2002. Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility. Thermal cycling without de-icing salt impact
BS EN 13442:2002 BS EN 13442:2002. Wood and parquet flooring and wood panelling and cladding. Determination of the resistance to chemical agents
BS EN 13647:2002 BS EN 13647:2002. Wood and parquet flooring and wood panelling and cladding. Determination of geometrical characteristics
BS EN 1097-10:2002 BS EN 1097-10:2002. Tests for mechanical and physical properties of aggregates. Determination of water suction height
BS EN 61512-2:2002 BS EN 61512-2:2002. Batch control. Data structures and guidelines for languages
BS EN 13624:2003 BS EN 13624:2003. Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of fungicidal activity of chemical disinfectants for instruments used in the medical area. Test method and requirements (phase 2, step 1)
BS EN 13610:2002 BS EN 13610:2002. Chemical disinfectants. Quantitative suspension test for the evaluation of virucidal activity against bacteriophages of chemical disinfectants used in food and industrial areas. Test method and requirements (phase 2, step 1)
BS ISO 11338-2:2003 BS ISO 11338-2:2003. Stationary source emissions. Determination of gas and particle-phase polycyclic aromatic hydrocarbons. Sample preparation, clean-up and determination
BS EN 13657:2002 BS EN 13657:2002. Characterization of waste. Digestion for subsequent determination of aqua regia soluble portion of elements
BS EN 13656:2002 BS EN 13656:2002. Characterization of waste. Microwave assisted digestion with hydrofluoric (HF), nitric (HNO3), and hydrochloric (HCl) acid mixture for subsequent determination of elements
BS EN 13138-2:2002 BS EN 13138-2:2002. Buoyant aids for swimming instruction. Safety requirements and test methods for buoyant aids to be held
BS EN 12385-5:2002 BS EN 12385-5:2002. Steel wire ropes. Safety. Stranded ropes for lifts
BS EN 12385-6:2004 BS EN 12385-6:2004. Steel wire ropes. Safety. Stranded ropes for mine shafts
BS EN 12385-7:2002 BS EN 12385-7:2002. Steel wire ropes. Safety. Locked coil ropes for mine shafts
BS EN 12385-8:2002 BS EN 12385-8:2002. Steel wire ropes. Safety. Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons
BS EN 12385-9:2002 BS EN 12385-9:2002. Steel wire ropes. Safety. Locked coil carrying ropes for cableway installations designed to carry persons
BS ISO 1837:2003 BS ISO 1837:2003. Lifting hooks. Nomenclature
04/30008013 DC 04/30008013 DC. BS ISO 3266. Eyebolts grade 4 for general lifting purposes
BS ISO 10425:2003 BS ISO 10425:2003. Steel wire ropes for the petroleum and natural gas industries. Minimum requirements and terms of acceptance
BS ISO 17339:2002 BS ISO 17339:2002. Ships and marine technology. Sea anchors for survival craft and rescue boats
BS ISO 10727:2002 BS ISO 10727:2002. Tea and instant tea in solid form. Determination of caffeine content. Method using high-performance liquid chromatography
BS 8409:2002 BS 8409:2002. Soft indoor play areas. Code of practice
BS EN 61076-2-102:2002 BS EN 61076-2-102:2002. Connectors for electronic equipment. Circular connectors. Circular connectors with assessed quality. Detail specification for plugs and jacks for external low voltage power supply
BS EN 60770-2:2003 BS EN 60770-2:2003. Transmitters for use in industrial-process control systems. Methods for inspection and routine testing
BS EN 61967-5:2003 BS EN 61967-5:2003. Integrated circuits. Measurement of electromagnetic emissions, 150 kHz to 1 GHz. Measurement of conducted emissions. Workbench Faraday Cage method
BS EN 61290-10-2:2003 BS EN 61290-10-2:2003. Optical amplifiers. Test methods. Multichannel parameters. Pulse method using a gated optical spectrum analyzer
BS EN ISO 4027:2003 BS EN ISO 4027:2003. Hexagon socket set screws with cone point
BS EN 50311:2003 BS EN 50311:2003. Railway applications. Rolling stock. D.C. supplied electronic ballasts for lighting fluorescent lamps
BS EN 61290-5-3:2002 BS EN 61290-5-3:2002. Optical fibre amplifiers. Basic specification. Test methods for reflectance parameters. Reflectance tolerance using an electrical spectrum analyser
ISO/TR16060 : 2003 EDTN 1 ISO/TR16060 : 2003 EDTN 1. ISO/TR16060 : 2003 Destructive tests on welds in metallic materials - Etchants for macroscopic and microscopic examination
BS EN 50201:2001 BS EN 50201:2001. Interfaces for DVB-IRD
BS EN 13683:2003 BS EN 13683:2003. Garden equipment. Integrally powered shredders/chippers. Safety
BS EN 13677-1:2003 BS EN 13677-1:2003. Reinforced thermoplastic moulding compounds. Specification for GMT. Designation
ISO16586 : 2003 EDTN 1 ISO16586 : 2003 EDTN 1. ISO16586 : 2003 Soil quality- Determination of soil water content as a volume fraction on basis of known bulk dry density Gravimetric method
BS EN 13677-2:2003 BS EN 13677-2:2003. Reinforced thermoplastic moulding compounds. Specification for GMT. Methods of test and general requirements
BS ISO/IEC 15288:2002 BS ISO/IEC 15288:2002. Systems engineering. System life cycle processes
BS EN 13677-3:2003 BS EN 13677-3:2003. Reinforced thermoplastic moulding compounds. Specification for GMT. Specific requirements
BS ISO 11318:2002 BS ISO 11318:2002. Cardiac defibrillators. Connector assembly DF-1 for implantable defibrillators. Dimensions and test requirements
PD ISO/IEC TR 9126-2:2003 PD ISO/IEC TR 9126-2:2003. Software engineering. Product quality. External metrics
PD ISO/IEC TR 9126-3:2003 PD ISO/IEC TR 9126-3:2003. Software engineering. Product quality. Internal metrics
BS EN 352-1:2002 BS EN 352-1:2002. Hearing protectors. Safety requirements and testing. Ear-muffs
BS EN 352-2:2002 BS EN 352-2:2002. Hearing protectors. Safety requirements and testing. Ear-plugs
BS EN 352-3:2002 BS EN 352-3:2002. Hearing protectors. Safety requirements and testing. Ear-muffs attached to an industrial safety helmet
BS EN 352-6:2002 BS EN 352-6:2002. Hearing protectors. Safety requirements and testing. Ear-muffs with electrical audio input
BS EN 352-7:2002 BS EN 352-7:2002. Hearing protectors. Safety requirements and testing. Level-dependent ear-plugs
BS EN 13819-1:2002 BS EN 13819-1:2002. Hearing protectors. Testing. Physical test methods
BS EN 13819-2:2002 BS EN 13819-2:2002. Hearing protectors. Testing. Acoustic test methods
ISO11992-2 : 2003 EDTN 2 ISO11992-2 : 2003 EDTN 2. ISO11992-2 : 2003 Road vehicles- Interchange of digital information on electrical connections between towing and towed vehicles. Part 2: Application layer for brakes and running gear.
ISO11992-3 : 2003 EDTN 2 ISO11992-3 : 2003 EDTN 2. ISO11992-3 : 2003 Road vehicles- Interchange of digital information on electrical connections between towing and towed vehicles. Part 3: Application layer for equipment other than brakes and running gear
BS EN 54-12:2002 BS EN 54-12:2002. Fire detection and fire alarm systems. Smoke detectors. Line detectors using an optical light beam
BS EN 50343:2003 BS EN 50343:2003. Railway applications. Rolling stock. Rules for installation of cabling
BS EN 10226-1:2004 BS EN 10226-1:2004. Pipe threads where pressure tight joints are made on the threads. Taper external threads and parallel internal threads. Dimensions, tolerances and designation
BS EN 12952-15:2003 BS EN 12952-15:2003. Water-tube boilers and auxiliary installations. Acceptance tests
BS EN 12953-11:2003 BS EN 12953-11:2003. Shell boilers. Acceptance tests
BS EN 60454-3-16:2003 BS EN 60454-3-16:2003. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials. Polyester film/glass filament combinations with pressure-sensitive adhesive. Sheet 16: Polyester film/glass filament combinations with pressure-sensitive adhesive
BS EN 573-3:2003 BS EN 573-3:2003. Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition
BS EN 573-4:2004 BS EN 573-4:2004. Aluminium and aluminium alloys. Chemical composition and form of wrought products. Forms of products
BS EN 485-3:2003 BS EN 485-3:2003. Aluminium and aluminium alloys. Sheet, strip and plate. Tolerances on dimensions and form for hot-rolled products
BS EN 1780-1:2002 BS EN 1780-1:2002. Aluminium and aluminium alloys. Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castings. Numerical designation system
BS EN 1780-2:2002 BS EN 1780-2:2002. Aluminium and aluminium alloys. Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castings. Chemical symbol based designation system
BS EN 1780-3:2002 BS EN 1780-3:2002. Aluminium and aluminium alloys. Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castings. Writing rules for chemical composition
BS EN 60893-1:2004 BS EN 60893-1:2004. Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Definitions, designations and general requirements
BS EN 60893-3-1:2004 BS EN 60893-3-1:2004. Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for types of industrial rigid laminated sheets
BS EN 60893-3-3:2004 BS EN 60893-3-3:2004. Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on melamine resins
BS EN 60893-3-4:2004 BS EN 60893-3-4:2004. Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on phenolic resins
BS EN 60893-3-5:2004 BS EN 60893-3-5:2004. Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on polyester resins
BS EN 60893-3-6:2004 BS EN 60893-3-6:2004. Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on silicone resins
BS EN 60893-3-7:2004 BS EN 60893-3-7:2004. Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on polymide resins
BS EN ISO 15607:2003 BS EN ISO 15607:2003. Specification and qualification of welding procedures for metallic materials. General rules
BS 5446-2:2003 BS 5446-2:2003. Fire detection and fire alarm devices for dwellings. Specification for heat alarms
BS 5839-9:2003 BS 5839-9:2003. Fire detection and alarm systems for buildings. Code of practice for the design, installation, commissioning and maintenance of emergency voice communication systems
BS 6266:2002 BS 6266:2002. Code of practice for fire protection for electronic equipment installations
BS ISO 17604:2003 BS ISO 17604:2003. Microbiology of food and animal feeding stuffs. Carcass sampling for microbiological analysis
BS EN 13705:2004 BS EN 13705:2004. Welding of thermoplastics. Machines and equipment for hot gas welding (including extrusion welding)
BS EN 13711:2002 BS EN 13711:2002. Inland navigation vessels. Winches for ship operation. Safety requirements
BS EN 13687-4:2002 BS EN 13687-4:2002. Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility. Dry thermal cycling
BS EN 13687-5:2002 BS EN 13687-5:2002. Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility. Resistance to temperature shock
BS ISO 14621-2:2003 BS ISO 14621-2:2003. Space systems. Electrical, electronic and electromechanical (EEE) parts. Control programme requirements
BS EN 13453-2:2004 BS EN 13453-2:2004. Bunk beds and high beds for non-domestic use. Test methods
BS EN 13706-1:2002 BS EN 13706-1:2002. Reinforced plastics composites. Specifications for pultruded profiles. Designation
BS ISO 15213:2003 BS ISO 15213:2003. Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of sulfite-reducing bacteria growing under anaerobic conditions
BS ISO 14997:2003 BS ISO 14997:2003. Optics and optical instruments. Test methods for surface imperfections of optical elements
BS ISO/IEC 19500-2:2003 BS ISO/IEC 19500-2:2003. Information technology. Open distributed processing. General Inter-ORB Protocol (GIOP)/Internet Inter-ORB Protocol (IIOP)
PD IEC TR 61000-5-6:2002 PD IEC TR 61000-5-6:2002. Electromagnetic compatibility (EMC). Installation and mitigation guidelines. Mitigation of external EM influences
BS EN 13503-6:2002 BS EN 13503-6:2002. Ophthalmic implants. Intraocular lenses. Shelf-life and transport stability
BS EN 379:2003 BS EN 379:2003. Personal eye-protection. Automatic welding filters
BS ISO 12003-2:2002 BS ISO 12003-2:2002. Agricultural and forestry tractors. Narrow-track wheeled tractors. Rear-mounted roll-over protective structures
BS ISO 12003-1:2002 BS ISO 12003-1:2002. Agricultural and forestry tractors. Narrow-track wheeled tractors. Front-mounted roll-over protective structures
DD 252:2002 DD 252:2002. Components for residential sprinkler systems. Specification and test methods for residential sprinklers
BS ISO 17531:2002 BS ISO 17531:2002. Photography. Processing chemicals. Specifications for 4-(N-ethyl-N-2- methanesulfonylaminoethyl)-2-methylphenylenediamine sesquisulfate monohydrate
BS EN 50336:2002 BS EN 50336:2002. Bushings for transformers and reactor cable boxes not exceeding 36 kV
BS EN 60793-1-45:2003 BS EN 60793-1-45:2003. Optical fibres. Measurement methods and test procedures. Mode field diameter
BS ISO 15635:2001 BS ISO 15635:2001. Coated abrasives. Flap discs
BS EN 13706-2:2002 BS EN 13706-2:2002. Reinforced plastics composites. Specifications for pultruded profiles. Method of test and general requirements
BS ISO 16057:2002 BS ISO 16057:2002. Coated abrasives. Vulcanized fibre discs
BS EN 13706-3:2002 BS EN 13706-3:2002. Reinforced plastics composites. Specifications for pultruded profiles. Specific requirements
BS EN ISO 5667-19:2004, BS 6068-6.19:2004 BS EN ISO 5667-19:2004, BS 6068-6.19:2004. Water quality. Sampling. Guidance on sampling in marine sediments
BS EN ISO 17994:2004, BS 6068-4.19:2004 BS EN ISO 17994:2004, BS 6068-4.19:2004. Water quality. Criteria for establishing equivalence between microbiological methods
BS EN 13727:2003 BS EN 13727:2003. Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants for instruments used in the medical area. Test method and requirements (Phase 2/Step 1)
BS EN 13718-1:2002 BS EN 13718-1:2002. Air, water and difficult terrain ambulances. Medical devices interface requirements for the continuity of patient care
BS EN 13718-2:2002 BS EN 13718-2:2002. Air, water and difficult terrain ambulances. Operational and technical requirements for the continuity of patient care
BS EN 14148:2003 BS EN 14148:2003. Foodstuffs. Determination of vitamin K1 by HPLC
BS ISO 12141:2002 BS ISO 12141:2002. Stationary source emissions. Determination of mass concentration of particulate matter (dust) at low concentrations. Manual gravimetric method
BS EN 13751:2002 BS EN 13751:2002. Foodstuffs. Detection of irradiated food using photostimulated luminescence
BS EN ISO 13710:2004 BS EN ISO 13710:2004. Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps
BS EN 13750:2002 BS EN 13750:2002. Domestic water kettles for use on top of stove, cooker or hob. Requirements and test methods
BS EN ISO 16140:2003 BS EN ISO 16140:2003. Microbiology of food and animal feeding stuffs. Protocol for the validation of alternative methods
BS EN 13740-2:2003 BS EN 13740-2:2003. Agricultural machinery. Solid fertilizer line-distributors. Environmental protection. Test methods
BS EN 62018:2003 BS EN 62018:2003. Power consumption of information technology equipment. Measurement methods
BS EN 60512-2-1:2002 BS EN 60512-2-1:2002. Connectors for electronic equipment. Tests and measurements. Electrical continuity and contact resistance tests. Test 2a. Contact resistance. Millivolt level method
BS EN 60512-2-2:2003 BS EN 60512-2-2:2003. Connectors for electronic equipment. Tests and measurements. Electrical continuity and contact resistance tests. Test 2b. Contact resistance. Specified test current method
BS EN 60512-2-5:2003 BS EN 60512-2-5:2003. Connectors for electronic equipment. Tests and measurements. Test 2e. Contact disturbance
BS EN 60512-4-1:2003 BS EN 60512-4-1:2003. Connectors for electronic equipment. Tests and measurements. Voltage stress tests. Test 4a. Voltage proof
BS EN 1943:2002 BS EN 1943:2002. Self adhesive tapes. Measurement of static shear adhesion
BS EN ISO 16104:2003 BS EN ISO 16104:2003. Packaging. Transport packaging for dangerous goods. Test methods
BS ISO 14302:2002 BS ISO 14302:2002. Aerospace series. Space systems. Electromagnetic compatibility requirements
BS ISO 15592-3:2003 BS ISO 15592-3:2003. Fine-cut tobacco and smoking articles made from it. Methods of sampling, conditioning and analysis. Determination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determination of water and nicotine, and calculation of nicotine-free dry particulate matter
BS ISO 9512:2002 BS ISO 9512:2002. Cigarettes. Determination of ventilation. Definitions and measurement principles
BS EN 12810-2:2003 BS EN 12810-2:2003. Facade scaffolds made of prefabricated components. Particular methods of structural design
BS EN 12811-1:2003 BS EN 12811-1:2003. Temporary works equipment. Scaffolds. Performance requirements and general design
BS EN 61290-3-2:2003 BS EN 61290-3-2:2003. Optical fibre amplifiers. Basic specification. Test methods for noise figure parameters. Electrical spectrum analyzer method
BS ISO 17560:2002 BS ISO 17560:2002. Surface chemical analysis. Secondary-ion mass spectrometry. Method for depth profiling of boron in silicon
BS EN 13760:2003 BS EN 13760:2003. Automotive LPG filling system for light and heavy duty vehicles. Nozzle, test requirements and dimensions
BS EN 10296-1:2003 BS EN 10296-1:2003. Welded circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions. Non-alloy and alloy steel tubes
BS EN 60684-3-340 to 342:2003 BS EN 60684-3-340 to 342:2003. Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Expandable braided polyethylene terephthalate textile sleeving. Sheets 340 to 342: Expandable braided polyethylene terephthalate textile sleeving
BS EN 60684-3-343 to 345:2002 BS EN 60684-3-343 to 345:2002. Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated. Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated.
DD IEC TS 62091:2003 DD IEC TS 62091:2003. Low-voltage switchgear and controlgear. Controllers for drivers of stationary fire pumps
BS EN 60684-3-420 to 422:2002 BS EN 60684-3-420 to 422:2002. Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Polyethylene terephthalate textile sleeving with acrylic based coating. Sheets 420 to 422: Polyethylene terephthalate textile with acrylic-based coating.
ISO17638 : 2003 EDTN 1 ISO17638 : 2003 EDTN 1. ISO17640 : 2003 Non-destructive examination of welds- Magnetic particle testing
ISO17636 : 2003 EDTN 1 ISO17636 : 2003 EDTN 1. ISO17636 : 2003 Non-destructive examination of welds - Radiographic testing of fusion-welded joints
ISO17639 : 2003 EDTN 1 ISO17639 : 2003 EDTN 1. ISO17639 : 2003 Non-destructive examination of fusion welds- Macroscopic and microscopic examination of welds
ISO17635 : 2003 EDTN 1 ISO17635 : 2003 EDTN 1. ISO17635 : 2003 Non-destructive examination of welds- General rules for metallic materials
ISO9015-2 : 2003 EDTN 1 ISO9015-2 : 2003 EDTN 1. ISO9015 : 2003 Destructive test on on welds in metallic materials - Hardness tesing. Part 2 : Hardness test on arc welded joints
BS EN 13544-2:2002 BS EN 13544-2:2002. Respiratory therapy equipment. Tubing and connectors
ISO/IEC10021-1 : 2003 (EDTN2) HEADER ISO/IEC10021-1 : 2003 (EDTN2) HEADER. ISO/IEC10021-1 : 2003 Information technology - Message Handling systems (MHS). Part 1: System and Service Overview
ISO/IEC10021-4 : 2003 (CD-ROM) ISO/IEC10021-4 : 2003 (CD-ROM) . ISO/IEC10021-4 : 2003 Information technology - Message Handlin system: Abstract service definition and procedures
BS EN 13981-2:2004 BS EN 13981-2:2004. Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery. Plates and sheets
BS EN 10162:2003 BS EN 10162:2003. Cold rolled steel sections. Technical delivery conditions. Dimensional and cross-sectional tolerances
BS EN 60255-22-7:2003 BS EN 60255-22-7:2003. Electrical relays. Electrical disturbance tests for measuring relays and protection equipment. Power frequency immunity tests
BS EN 576:2003 BS EN 576:2003. Aluminium and aluminium alloys. Unalloyed aluminium ingots for remelting. Specifications
BS EN 60335-2-88:2002 BS EN 60335-2-88:2002. Specification for safety of household and similar electrical appliances. Particular requirements. Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems
BS EN ISO 6272-1:2004, BS 3900-E13:2004 BS EN ISO 6272-1:2004, BS 3900-E13:2004. Paints and varnishes. Rapid-deformation (impact resistance) tests. Falling-weight test, large-area indenter
BS ISO 17288-1:2002 BS ISO 17288-1:2002. Passenger cars. Free-steer behaviour. Steering-release open-loop test method
BS EN 60255-22-4:2002 BS EN 60255-22-4:2002. Electrical relays. Electrical disturbance tests for measuring relays and protection equipment. Electrical fast transient/burst immunity test
BS EN 1330-10:2003 BS EN 1330-10:2003. Non-destructive testing. Terminology. Terms used in visual testing
PD CR 14599:2002 PD CR 14599:2002. Terms and definitions for welding purposes in relation with EN 1792
ISO14737 : 2003 EDTN.1 ISO14737 : 2003 EDTN.1. ISO14737 : 2003 Cast non-alloy and low alloy steels for steels for general applications
BS EN 14153-2:2003 BS EN 14153-2:2003. Recreational diving services. Safety related minimum requirements for the training of recreational scuba divers. Level 2. Autonomous Diver
BS EN 14153-3:2003 BS EN 14153-3:2003. Recreational diving services. Safety related minimum requirements for the training of recreational scuba divers. Level 3. Dive Leader
BS EN 14153-1:2003 BS EN 14153-1:2003. Recreational diving services. Safety related minimum requirements for the training of recreational scuba divers. Level 1. Supervised Diver
BS EN 14413-2:2004 BS EN 14413-2:2004. Recreational diving services. Safety related minimum requirements for the training of scuba instructors. Level 2
BS EN 14467:2004 BS EN 14467:2004. Recreational diving services. Requirements for recreational scuba diving service providers
BS EN 14096-1:2003 BS EN 14096-1:2003. Non-destructive testing. Qualification of radiographic film digitisation systems. Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
BS EN ISO 14819-2:2003 BS EN ISO 14819-2:2003. Traffic and Traveller Information (TTI). TTI messages via traffic message coding. Event and information codes for Radio Data System. Traffic Message Channel (RDS-TMC)
BS EN 14096-2:2003 BS EN 14096-2:2003. Non-destructive testing. Qualification of radiographic film digitisation systems. Minimum requirements
ISO/IEC10021-7 : 2003 (CD-ROM) HEADER ISO/IEC10021-7 : 2003 (CD-ROM) HEADER. ISO/IEC10021-7 : 2003 Information technology - Message Hanlding System (MHS): Interpersonal messaging system
BS 7971-1:2002 BS 7971-1:2002. Protective clothing and equipment for use in violent situations and in training. General requirements
BS EN 14054:2003 BS EN 14054:2003. Packaging. Paper and paperboard packaging. Design of cartons
BS EN 13972:2002 BS EN 13972:2002. Rigid plastic containers. Definition of nominal, brimful and total capacity and measurement of brimful and total capacity
BS EN 13973:2002 BS EN 13973:2002. Rigid plastics containers. Method for determination of drainability
BS EN 13780:2003 BS EN 13780:2003. Touch and close fasteners. Determination of longitudinal shear strength
BS EN 13974:2002 BS EN 13974:2002. Rigid plastics containers. Specification of tolerance for dimensions, weight and volume
BS EN 14149:2003 BS EN 14149:2003. Packaging. Complete, filled transport packages and unit loads. Impact test by rotational drop
BS EN 14053:2003 BS EN 14053:2003. Packaging. Packagings manufactured from corrugated or solid fibreboard. Types and construction
BS ISO 15550:2002 BS ISO 15550:2002. Internal combustion engines. Determination and method for the measurement of engine power. General requirements
NC/BSENISO7539-6 : 2003 NC/BSENISO7539-6 : 2003.
BS EN 12470-5:2003 BS EN 12470-5:2003. Clinical thermometers. Performance of infra-red ear thermometers (with maximum device)
BS EN 13826:2003 BS EN 13826:2003. Peak expiratory flow meters
BS EN 13867:2002 BS EN 13867:2002. Concentrates for haemodialysis and related therapies
BS EN 13868:2002 BS EN 13868:2002. Catheters. Test methods for kinking of single lumen catheters and medical tubing
ISO16050 : 2003 EDTN 1 ISO16050 : 2003 EDTN 1. ISO16050 : 2003 Foodstuffs- Determination of aflatoxin B1 and the sum of B1, B2, G1 & G2 in cereals, nuts and derived products- High performance liquid chromatographic method
ISO4990 : 2003 EDTN 2 ISO4990 : 2003 EDTN 2. ISO4990 : 2003 EDTN 2 Steel castings - General technical delivery requirements
BS EN ISO 18279:2003 BS EN ISO 18279:2003. Brazing. Imperfections in brazed joints
BS EN 60684-3-406 to 408:2003 BS EN 60684-3-406 to 408:2003. Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Glass textile sleeving with PVC coating
BS EN ISO 3823-2:2003 BS EN ISO 3823-2:2003. Dental rotary instruments. Burs. Finishing burs
BS EN ISO 15011-3:2002 BS EN ISO 15011-3:2002. Health and safety in welding and allied processes. Laboratory method for sampling fume and gases generated by arc welding. Determination of ozone concentration using fixed point measurements
BS EN ISO 15011-2:2003 BS EN ISO 15011-2:2003. Health and safety in welding and allied processes. Laboratory method for sampling fume and gases generated by arc welding. Determination of emission rates of gases, except ozone
BS EN 12457-1:2002 BS EN 12457-1:2002. Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction)
BS EN 12457-2:2002 BS EN 12457-2:2002. Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction)
BS EN 12457-3:2002 BS EN 12457-3:2002. Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with a high solid content and with a particle size below 4 mm (without or with size reduction)
BS EN 12457-4:2002 BS EN 12457-4:2002. Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction)
BS EN 13795-1:2002 BS EN 13795-1:2002. Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment. General requirements for manufacturers, processors and products
BS ISO 17202:2002 BS ISO 17202:2002. Textiles. Determination of twist in single spun yarns. Untwist/retwist method
BS EN 13793:2003 BS EN 13793:2003. Thermal insulating products for building applications. Determination of behaviour under cyclic loading
BS EN ISO 544:2003 BS EN ISO 544:2003. Welding consumables. Technical delivery conditions for welding filler metals. Type of product, dimensions, tolerances and markings
WD/BSEN60216-5 : 2003 WD/BSEN60216-5 : 2003 .
BS EN 60947-2:2003 BS EN 60947-2:2003. Specification for low-voltage switchgear and controlgear. Circuit-breakers
BS ISO 10705-3:2003, BS 6068-4.16:2003 BS ISO 10705-3:2003, BS 6068-4.16:2003. Water quality. Detection and enumeration of bacteriophages. Validation of methods for concentration of bacteriophages from water
BS EN 62024-1:2002 BS EN 62024-1:2002. High frequency inductive components. Electrical characteristics and measuring methods. Nanohenry range chip inductor
BS EN 187105:2002 BS EN 187105:2002. Single mode optical cable (duct/direct buried installation)
BS EN 13804:2002 BS EN 13804:2002. Foodstuffs. Determination of trace elements. Performance criteria, general considerations and sample preparation
BS EN ISO 11554:2003 BS EN ISO 11554:2003. Optics and optical instruments. Lasers and laser-related equipment. Test methods for laser beam power, energy and temporal characteristics
BS ISO 15629:2002 BS ISO 15629:2002. Pallets for materials handling. Quality of fasteners for assembly of new and repair of used, flat, wooden pallets
BS ISO 18333:2002 BS ISO 18333:2002. Pallets for materials handling. Quality of new wooden components for flat pallets
BS ISO 18334:2003 BS ISO 18334:2003. Pallets for materials handling. Quality of assembly of new, wooden, flat pallets
BS 1262:2002 BS 1262:2002. Metal packaging. Round lever-lid metal containers for surface coatings. Specification
BS EN 1744-3:2002 BS EN 1744-3:2002. Tests for chemical properties of aggregates. Preparation of eluates by leaching of aggregates
BS ISO 14396:2002 BS ISO 14396:2002. Reciprocating internal combustion engines. Determination and method for the measurement of engine power. Additional requirements for exhaust emission tests in accordance with ISO 8178
BS EN 13010:2003 BS EN 13010:2003. Packaging. Unit packaging. Dimensions and requirements for pegboard display
BS EN 13590:2003 BS EN 13590:2003. Packaging. Flexible carrier bags for the transport of various retail goods. General characteristics and test methods for the determination of volume and carrying capacity
BS EN 13626:2003 BS EN 13626:2003. Packaging. Box pallets. General requirements and test methods
BS EN 13628-1:2002 BS EN 13628-1:2002. Packaging. Flexible packaging material. Determination of residual solvents by static headspace gas chromatography. Absolute methods
BS EN 13628-2:2002 BS EN 13628-2:2002. Packaging. Flexible packaging material. Determination of residual solvents by static headspace gas chromatography. Industrial methods
BS EN 13593:2003 BS EN 13593:2003. Packaging. Paper sacks for household waste collection. Types, requirements and test methods
ISO3580 : 2004 EDTN.2 ISO3580 : 2004 EDTN.2. ISO3580 : 2004 Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels - Classification
ISO17846 : 2004 EDTN 1 ISO17846 : 2004 EDTN 1. ISO17846 : 2004 Welding and allied processes - Health and safety - Wordless precautionary labels for equipment and conusmables used in arc welding and cutting
BS EN 61855:2003 BS EN 61855:2003. Household electrical hair care appliances. Methods of measuring the performance
BS EN ISO 9360-2:2002 BS EN ISO 9360-2:2002. Anaesthetic and respiratory equipment. Heat and moisture exchangers (HMEs) for humidifying respired gases in humans. HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml
BS EN 14079:2003 BS EN 14079:2003. Non-active medical devices. Performance requirements and test methods for absorbent cotton gauze and absorbent cotton and viscose gauze
BS EN 14184:2003, BS 6068-5.34:2003 BS EN 14184:2003, BS 6068-5.34:2003. Water quality. Guidance standard for the surveying of aquatic macrophytes in running waters
BS EN 14011:2003, BS 6068-5.32:2003 BS EN 14011:2003, BS 6068-5.32:2003. Water quality. Sampling of fish with electricity
BS ISO 12256:2002 BS ISO 12256:2002. Drives, internal, cruciform, ribbed. Metric series
BS ISO 15186-3:2002 BS ISO 15186-3:2002. Acoustics. Measurement of sound insulation in buildings and of building elements using sound intensity. Laboratory measurements at low frequencies
BS EN 13949:2003 BS EN 13949:2003. Respiratory equipment. Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen. Requirements, testing, marking
BS EN 14143:2003 BS EN 14143:2003. Respiratory equipment. Self-contained re-breathing diving apparatus
BS ISO 14275:2002 BS ISO 14275:2002. Aerospace. Drives, internal, offset cruciform, ribbed. Metric series
BS ISO 14276:2002 BS ISO 14276:2002. Aerospace. Drives, internal, offset cruciform. Metric series
BS ISO 14278:2002 BS ISO 14278:2002. Aerospace. Gauges, for internal offset cruciform ribbed or unribbed drives. Metric series
BS ISO 14279:2002 BS ISO 14279:2002. Aerospace. Drives, internal, cruciform. Metric series
BS ISO 14280:2002 BS ISO 14280:2002. Aerospace. Drivers, ribbed, for internal cruciform ribbed or unribbed drives. Metric series
BS ISO 14281:2002 BS ISO 14281:2002. Aerospace. Gauges, for internal cruciform ribbed or unribbed drives. Metric series
ISO/TR17944 : 2002 EDTN 1 ISO/TR17944 : 2002 EDTN 1. ISO/TR17944 : 2002 Banking, Securities and other financial services- Framework of security in financial systems
BS ISO 12107:2003 BS ISO 12107:2003. Metallic materials. Fatigue testing. Statistical planning and analysis of data
BS ISO 12108:2002 BS ISO 12108:2002. Metallic materials. Fatigue testing. Fatigue crack growth method
BS EN ISO 13695:2004 BS EN ISO 13695:2004. Optics and photonics. Lasers and laser-related equipment. Test methods for the spectral characteristics of lasers
ISO8362-1 : 2003 EDTN 2 ISO8362-1 : 2003 EDTN 2. ISO8362-1 : 2003 Injection containers and accessories. Part 1: Injection vials made of glass tubing
ISO8362-4 : 2003 EDTN 2 ISO8362-4 : 2003 EDTN 2. ISO8362-4 : 2003 Injection containers and accessories. Part 4: Injection vials made of moulded glass
BS 5502-22:2003 BS 5502-22:2003. Buildings and structures for agriculture. Code of practice for design, construction and loading
BS EN ISO 18273:2004 BS EN ISO 18273:2004. Welding consumables. Wire electrodes, wires and rods for welding of aluminium and aluminium alloys. Classification
BS EN ISO 1071:2003 BS EN ISO 1071:2003. Welding consumables. Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron. Classification
BS EN 50324-3:2002 BS EN 50324-3:2002. Piezoelectric properties of ceramic materials and components. Methods of measurement. High power
BS EN 13523-6:2002 BS EN 13523-6:2002. Coil coated metals. Test methods. Adhesion after indentation (cupping test)
BS EN 13523-15:2002 BS EN 13523-15:2002. Coil coated metals. Test methods. Metamerism
BS EN 13523-23:2002 BS EN 13523-23:2002. Coil coated metals. Test methods. Colour stability in humid atmospheres containing sulfur dioxide
BS EN 4585:2003 BS EN 4585:2003. Aerospace series. Clips, spring tension. Technical specification
DD ISO/TS 11155-2:2002 DD ISO/TS 11155-2:2002. Road vehicles. Air filters for passenger compartments. Test for gaseous filtration
DD ISO/TR 16144:2002 DD ISO/TR 16144:2002. Hydraulic fluid power. Calibration of liquid automatic particle counters. Procedures used to certify the standard reference material SRM 2806
PD ISO/TR 16806:2003 PD ISO/TR 16806:2003. Pneumatic fluid power. Cylinders. Load capacity of pneumatic slides and their presentation method
BS EN ISO 14314:2004 BS EN ISO 14314:2004. Reciprocating internal combustion engines. Recoil starting equipment. General safety requirements
BS EN 62025-1:2002 BS EN 62025-1:2002. High frequency inductive components. Non-electrical characteristics and measuring methods. Fixed, surface mounted inductors for use in electronic and telecommunication equipment
BS ISO 8098:2002 BS ISO 8098:2002. Cycles. Safety requirements for bicycles for young children
BS ISO/IEC 15939:2002 BS ISO/IEC 15939:2002. Software engineering. Software measurement process
BS ISO 16446:2002 BS ISO 16446:2002. Ships and marine technology. Marine environmental protection. Adaptor for joining dissimilar boom connectors
BS 7961:2004 BS 7961:2004. Specification for a device for measuring the static vertical mass (noseweight)at the coupling point of the towed vehicle.
BS 4274-1:2003 BS 4274-1:2003. Visual acuity test types. Test charts for clinical determination of distance visual acuity. Specification
BS ISO 8899:2003 BS ISO 8899:2003. Oil of lemon petitgrain [Citrus limon (L.) Burm.f.]
BS ISO 17399:2003 BS ISO 17399:2003. Space systems. Man-systems integration
BS EN 13842:2004 BS EN 13842:2004. Oil fired forced convection air heaters. Stationary and transportable for space heating
BS EN 13820:2003 BS EN 13820:2003. Thermal insulating materials for building applications. Determination of organic content
BS EN 13798:2002 BS EN 13798:2002. Hydrometry. Specification for a reference raingauge pit
BS ISO 8536-5:2004 BS ISO 8536-5:2004. Infusion equipment for medical use. Burette infusion sets for single use, gravity feed
BS EN 187103:2003 BS EN 187103:2003. Harmonized system of quality assessment for electronic components. Family specification. Optical fibre cables for indoor applications
BS EN 13286-41:2003 BS EN 13286-41:2003. Unbound and hydraulically bound mixtures. Test method for determination of the compressive strength of hydraulically bound mixtures
BS EN 13286-42:2003 BS EN 13286-42:2003. Unbound and hydraulically bound mixtures. Test method for the determination of the indirect tensile strength of hydraulically bound mixtures
BS EN 12697-26:2004 BS EN 12697-26:2004. Bituminous mixtures. Test methods for hot mix asphalt. Stiffness
BS EN ISO 18513:2003 BS EN ISO 18513:2003. Tourism services. Hotels and other types of tourism accommodation. Terminology
BS EN 12814-7:2002 BS EN 12814-7:2002. Testing of welded joints of thermoplastics semi-finished products. Tensile test with waisted test specimens
BS ISO 18593:2004 BS ISO 18593:2004. Microbiology of food and animal feeding stuffs. Horizontal methods for sampling techniques from surfaces using contact plates and swabs
BS 2B 27:2002 BS 2B 27:2002. Copper-zinc-aluminium-nickel-silicon alloy tube
BS EN 12697-12:2003 BS EN 12697-12:2003. Bituminous mixtures. Test methods for hot mix asphalt. Determination of the water sensitivity of bituminous specimens
BS EN 730-1:2002 BS EN 730-1:2002. Gas welding equipment. Safety devices. Incorporating a flame (flashback) arrestor
BS EN 730-2:2002 BS EN 730-2:2002. Gas welding equipment. Safety devices. Not incorporating a flame (flashback) arrestor
BS EN 12697-31:2004 BS EN 12697-31:2004. Bituminous mixtures. Test methods for hot mix asphalt. Specimen preparation gyratory compactor
BS EN 13810-1:2002 BS EN 13810-1:2002. Wood-based panels. Floating floors. Performance specifications and requirements
BS EN 14121:2003 BS EN 14121:2003. Aluminium and aluminium alloys. Aluminium sheet, strip and plate for electrotechnical applications
BS EN 14287:2004 BS EN 14287:2004. Aluminium and aluminium alloys. Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components
BS EN 12697-16:2004 BS EN 12697-16:2004. Bituminous mixtures. Test methods for hot mix asphalt. Abrasion by studded tyres
BS EN 60077-3:2002 BS EN 60077-3:2002. Railway applications. Electric equipment for rolling stock. Electrotechnical components. Rules for d.c. circuit-breakers
BS EN 61377-3:2002 BS EN 61377-3:2002. Railway applications. Rolling stock. Combined testing of alternating current motors, fed by an indirect convertor, and their control system
BS ISO 2000:2003 BS ISO 2000:2003. Rubber, raw natural. Guidelines for the specification of technically specified grades (TSR)
BS ISO 8573-6:2003 BS ISO 8573-6:2003. Compressed air. Test methods for gaseous contaminant content
BS 4F 111:2002 BS 4F 111:2002. Flax harness webbing for aerospace purposes
BS EN 50117-2-1:2002 BS EN 50117-2-1:2002. Coaxial cables. Sectional specification for cables used in cabled distribution networks. Indoor drop cables for systems operating at 5 MHz - 1000 MHz
BS EN 10028-3:2003 BS EN 10028-3:2003. Specification for flat products made of steels for pressure purposes. Weldable fine grain steels, normalized
ISO10282 : 2002 EDTN 2 ISO10282 : 2002 EDTN 2. ISO10282 : 2002 Single-use sterile surgical rubber gloves
DD CEN/TS 14507-1:2003 DD CEN/TS 14507-1:2003. Inhalational nitric oxide systems. Delivery systems
BS EN 1733:2002 BS EN 1733:2002. Suction catheters for use in the respiratory tract
BS EN ISO 17653:2003 BS EN ISO 17653:2003. Destructive tests on welds in metallic materials. Torsion test of resistance spot welds
BS 3F 129:2003 BS 3F 129:2003. Woven polyester narrow fabrics for aerospace purposes
BS EN 13858:2003 BS EN 13858:2003. Corrosion protection of metals. Non-electrolytically applied zinc flake coatings on iron or steel components
BS EN ISO 17654:2003 BS EN ISO 17654:2003. Destructive tests on welds in metallic materials. Resistance welding. Pressure test on resistance seam welds
BS EN 13860-1:2003 BS EN 13860-1:2003. Non destructive testing. Eddy current examination. Equipment characteristics and verification. Instrument characteristics and verification
BS EN 1011-7:2004 BS EN 1011-7:2004. Welding. Recommendations for welding of metallic materials. Electron beam welding
BS EN 1011-5:2003 BS EN 1011-5:2003. Welding. Recommendations for welding of metallic materials. Welding of clad steel
BS ISO 7589:2002 BS ISO 7589:2002. Photography. Illuminants for sensitometry. Specifications for daylight, incandescent tungsten and printer
BS 3SP 168-169:2002 BS 3SP 168-169:2002. Ferrules and assembly wires for braided rubber cord assemblies for aerospace use
BS 3SP 170-171:2002 BS 3SP 170-171:2002. Braided rubber cord assemblies for aerospace use
BS ISO 11170:2003 BS ISO 11170:2003. Hydraulic fluid power. Filter elements. Sequence of tests for verifying performance characteristics
BS ISO 6195:2002 BS ISO 6195:2002. Fluid power systems and components. Cylinder-rod wiper-ring housings in reciprocating applications. Dimensions and tolerances
BS ISO 15903:2002 BS ISO 15903:2002. Soil quality. Format for recording soil and site information
BS EN 13861:2002 BS EN 13861:2002. Safety of machinery. Guidance for the application of ergonomics standards in the design of machinery
BS ISO 16772:2004 BS ISO 16772:2004. Soil quality. Determination of mercury in aqua regia soil extracts with cold-vapour atomic spectrometry or cold-vapour atomic fluorescence spectrometry
BS EN 13863-1:2003 BS EN 13863-1:2003. Concrete pavements. Test method for the determination of the thickness of a concrete pavement by survey method
BS EN ISO 8655-1:2002 BS EN ISO 8655-1:2002. Piston-operated volumetric apparatus. Terminology, general requirements and user recommendations
ISO8871-3 : 2003 EDTN 1 ISO8871-3 : 2003 EDTN 1. ISO8871-3 : 2003 Elastomeric parts for parenterals and for devices for pharmaceutical use. Part 3: Determination of released-particle count
ISO8871-1 : 2003 EDTN 1 ISO8871-1 : 2003 EDTN 1. ISO8871-1 : 2003 Elastomeric parts for parentals and for devices for pharmaceutical use. Part 1 Extracables in aqueous autoclavates
BS ISO 17771:2003 BS ISO 17771:2003. Plastics. Thermoset moulding compounds. Determination of the degree of fibre wetting in SMC
BS EN 61753-022-2:2003 BS EN 61753-022-2:2003. Fibre optic interconnecting devices and passive components performance standard. Fibre optic connectors terminated on multimode fibre for category C. Controlled environment
BS ISO 5391:2003 BS ISO 5391:2003. Pneumatic tools and machines. Vocabulary
ISO9301 : 2003 EDTN 1 ISO9301 : 2003 EDTN 1. ISO9301 : 2003 Oil of cumin fruit (Cuminum cyminum Linnaeus)
BS EN 61076-2-103:2004 BS EN 61076-2-103:2004. Connectors for electronic equipment. Circular connectors. Detail specification for a range of multipole connectors (type 'XLR')
BS EN 60603-7-7:2002 BS EN 60603-7-7:2002. Connectors for frequencies below 3 MHz for use with printed boards. Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 600 MHz (category 7, shielded)
BS EN 50345:2004 BS EN 50345:2004. Railway applications. Fixed installations. Electric traction. Insulating synthetic rope assemblies for support of overhead contact lines
BS ISO 18927:2002 BS ISO 18927:2002. Imaging materials. Recordable compact disc systems. Method for estimating the life expectancy based on the effects of temperature and relative humidity
BS EN 61676:2002 BS EN 61676:2002. Medical electrical equipment. Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
ISO15099 : 2003 EDTN 1 ISO15099 : 2003 EDTN 1. ISO15099 : 2003 EDTN 1 Thermal performance of windows, doors and shading devices - Detailed calculations
BS EN 13709:2002 BS EN 13709:2002. Industrial valves. Steel globe and globe stop and check valves
BS EN 9100:2003 BS EN 9100:2003. Aerospace series. Quality management systems. Requirements (based on ISO 9001:2000) and quality systems. Model for quality assurance in design, development, production, installation and servicing (based on ISO 9001:1994)
BS EN 13523-18:2002 BS EN 13523-18:2002. Coil coated metals. Test methods. Resistance to staining
BS EN 61076-4-114:2003 BS EN 61076-4-114:2003. Connectors for electronic equipment. Printed board connectors with assessed quality. Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm
PD IEC TR 60721-4-0:2002 PD IEC TR 60721-4-0:2002. Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068. Introduction
ISO18749 : 2004 EDTN.1 ISO18749 : 2004 EDTN.1. ISO18749 : 2004 Water quality - Adsorption of substances on activated sludge - Batch tests using specific analytical methods
BS 7F 34:2002 BS 7F 34:2002. Light and medium duty linen (flax) sewing thread for aerospace purposes
BS 5F 54:2002 BS 5F 54:2002. Heavy duty linen (flax) sewing thread for aerospace purposes
BS 5F 58:2002 BS 5F 58:2002. Cotton thread for aerospace purposes
BS EN 61056-1:2003 BS EN 61056-1:2003. Portable lead-acid cells and batteries (valve-regulated types). General requirements, functional characteristics. Methods of test
BS ISO 3597-1:2003 BS ISO 3597-1:2003. Textile-glass-reinforced plastics. Determination of mechanical properties on rods made of roving-reinforced resin. General considerations and preparation of rods
BS ISO 3597-2:2003 BS ISO 3597-2:2003. Textile-glass-reinforced plastics. Determination of mechanical properties on rods made of roving-reinforced resin. Determination of flexural strength
BS 8F 35:2002 BS 8F 35:2002. Braided linen (flax) lacing cord for aerospace purposes
BS 5F 59:2002 BS 5F 59:2002. Braided linen (flax) cord for aerospace purposes
BS ISO 16929:2002 BS ISO 16929:2002. Plastics. Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test
BS ISO 14152:2001 BS ISO 14152:2001. Neutron radiation protection shielding. Design principles and considerations for the choice of appropriate materials
BS EN 61076-4-111:2002 BS EN 61076-4-111:2002. Connectors for electronic equipment. Printed board connectors with assessed quality. Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1
BS EN ISO 8321-1:2002 BS EN ISO 8321-1:2002. Optics and optical instruments. Contact lenses. Rigid corneal and scleral contact lenses
BS EN 40-7:2002 BS EN 40-7:2002. Lighting columns. Requirements for fibre reinforced polymer composite lighting columns
BS EN 13726-3:2003 BS EN 13726-3:2003. Test methods for primary wound dressings. Waterproofness
BS EN 13726-4:2003 BS EN 13726-4:2003. Test methods for primary wound dressings. Conformability
BS EN 13726-6:2003 BS EN 13726-6:2003. Test methods for primary wound dressings. Odour control
BS ISO 3597-3:2003 BS ISO 3597-3:2003. Textile-glass-reinforced plastics. Determination of mechanical properties on rods made of roving-reinforced resin. Determination of compressive strength
BS ISO 3597-4:2003 BS ISO 3597-4:2003. Textile-glass-reinforced plastics. Determination of mechanical properties on rods made of roving-reinforced resin. Determination of apparent interlaminar shear strength
BS ISO 9022-2:2002 BS ISO 9022-2:2002. Optics and optical instruments. Environmental test methods. Cold, heat and humidity
BS ISO 9022-4:2002 BS ISO 9022-4:2002. Optics and optical instruments. Environmental test methods. Salt mist
BS ISO 4308-1:2003 BS ISO 4308-1:2003. Cranes and lifting appliances. Selection of wire ropes. General
BS EN 60068-3-8:2003 BS EN 60068-3-8:2003. Environmental testing. Supporting documentation and guidance. Selecting amongst vibration tests
BS EN 61162-400:2002 BS EN 61162-400:2002. Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Multiple talkers and multiple listeners. Ship systems interconnection. Introduction and general principles
BS EN ISO 17655:2003 BS EN ISO 17655:2003. Destructive tests on welds in metallic materials. Method for taking samples for delta ferrite measurement
BS EN ISO 15610:2003 BS EN ISO 15610:2003. Specification and qualification of welding procedures for metallic materials. Qualification based on tested welding consumables
BS EN ISO 15611:2003 BS EN ISO 15611:2003. Specification and qualification of welding procedures for metallic materials. Qualification based on previous welding experience
BS EN ISO 15612:2004 BS EN ISO 15612:2004. Specification and qualification of welding procedures for metallic materials. Qualification by adoption of a standard welding procedure
BS EN ISO 15613:2004 BS EN ISO 15613:2004. Specification and qualification of welding procedures for metallic materials. Qualification based on pre-production welding test
BS EN ISO 17666:2003 BS EN ISO 17666:2003. Space systems. Risk management
BS EN ISO 15614-12:2004 BS EN ISO 15614-12:2004. Specification and qualification of welding procedures for metallic materials. Welding procedure test. Spot, seam and projection welding
BS EN 61076-4-113:2003 BS EN 61076-4-113:2003. Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
ISO17874-1 : 2004 EDTN.1 ISO17874-1 : 2004 EDTN.1. ISO17874-1 : 2004 Remote-handling devices for radioactive materials. Part 1 General requirements
BS EN ISO 10438-2:2003 BS EN ISO 10438-2:2003. Petroleum and natural gas industries. Lubrication, shaft sealing and control oil systems and auxiliaries. Special purpose oil systems
BS EN ISO 10438-3:2003 BS EN ISO 10438-3:2003. Petroleum, petrochemical and natural gas industries. Lubrication, shaft sealing and control oil systems and auxilliaries. General-purpose oil systems
BS EN ISO 10438-4:2003 BS EN ISO 10438-4:2003. Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries. Self-acting gas seal support systems
BS 7971-6:2003 BS 7971-6:2003. Protective clothing and equipment for use in violent situations and in training. Gloves for protection against mechanical, thermal and chemical hazards. Requirements and test methods
BS ISO 15176:2002 BS ISO 15176:2002. Soil quality. Characterization of excavated soil and other soil materials intended for re-use
BS ISO 15218:2003 BS ISO 15218:2003. Pneumatic fluid power. 3/2 solenoid valves. Mounting interface surfaces
BS ISO 10705-4:2001, BS 6068-4.17:2001 BS ISO 10705-4:2001, BS 6068-4.17:2001. Water quality. Detection and enumeration of bacteriophages. Enumeration of bacteriophages infecting Bacteriodes fragilis
BS EN ISO 11403-1:2003 BS EN ISO 11403-1:2003. Plastics. Acquisition and presentation of comparable multipoint data. Mechanical properties
BS EN 13898:2003 BS EN 13898:2003. Machine tools. Safety. Sawing machines for cold metal
BS EN 61966-7-1:2002 BS EN 61966-7-1:2002. Multimedia systems and equipment. Colour measurement and management. Colour printers. Reflective prints. RGB inputs
BS EN 50129:2003 BS EN 50129:2003. Railway applications. Communication, signalling and processing systems. Safety related electronic systems for signalling
BS EN 998-2:2003 BS EN 998-2:2003. Specification for mortar for masonry. Masonry mortar
BS EN 845-2:2003 BS EN 845-2:2003. Specification for ancillary components for masonry. Lintels
BS ISO 9232:2003 BS ISO 9232:2003. Yogurt. Identification of characteristic microorganisms (Lactobacillus delbrueckii subsp. bulgaricus and Streptococcus thermophilus)
BS ISO 7889:2003 BS ISO 7889:2003. Yogurt. Enumeration of characteristic microorganisms. Colony-count technique at 37 °C
ISO752 : 2004 EDTN2 ISO752 : 2004 EDTN2. ISO752 : 2004 Zinc ingots
BS ISO 16002:2004 BS ISO 16002:2004. Stored cereal grains and pulses. Guidance on the detection of infestation by live invertebrates by trapping
BS ISO 9815:2003 BS ISO 9815:2003. Road vehicles. Passenger-car and trailer combinations. Lateral stability test
BS EN 13890:2002 BS EN 13890:2002. Workplace atmospheres. Procedures for measuring metals and metalloids in airborne particles. Requirements and test methods
BS EN 61190-1-2:2002 BS EN 61190-1-2:2002. Attachment materials for electronic assembly. Requirements for solder pastes for high-quality interconnections in electronic assembly
BS EN 61190-1-1:2002 BS EN 61190-1-1:2002. Attachment materials for electronic assembly. Requirements for soldering fluxes for high-quality interconnections in electronics assembly
BS EN ISO 15609-4:2004 BS EN ISO 15609-4:2004. Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Laser beam welding
BS EN 13177:2002 BS EN 13177:2002. Chemicals used for treatment of water intended for human consumption. Methanol
BS EN ISO 15609-5:2004 BS EN ISO 15609-5:2004. Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Resistance welding
BS EN 13887:2003 BS EN 13887:2003. Structural adhesives. Guidelines for surface preparation of metals and plastics prior to adhesive bonding
BS ISO 15242-1:2004 BS ISO 15242-1:2004. Rolling bearings. Measuring methods for vibration. Fundamentals
BS EN 12101-2:2003 BS EN 12101-2:2003. Smoke and heat control systems. Specification for natural smoke and heat exhaust ventilators
BS ISO 25539-1:2003 BS ISO 25539-1:2003. Cardiovascular implants. Endovascular devices. Endovascular prostheses
BS EN 10168:2004 BS EN 10168:2004. Steel products. Inspection documents. List of information and description
BS ISO 14300-2:2002 BS ISO 14300-2:2002. Space systems. Programme management. Product assurance
BS EN 61300-3-28:2002 BS EN 61300-3-28:2002. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Transient loss
BS EN ISO 17641-1:2004 BS EN ISO 17641-1:2004. Destructive tests on welds in metallic materials. Hot cracking tests for weldments. Arc welding processes. General
BS EN 61190-1-3:2002 BS EN 61190-1-3:2002. Attachment materials for electronic assembly. Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications
BS EN 12094-3:2003 BS EN 12094-3:2003. Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for manual triggering and stop devices
BS EN 12094-10:2003 BS EN 12094-10:2003. Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for pressure gauges and pressure switches
BS EN 12094-16:2003 BS EN 12094-16:2003. Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for odorizing devices for CO2 low pressure systems
BS EN 13925-1:2003 BS EN 13925-1:2003. Non-destructive testing. X-ray diffraction from polycrystalline and amorphous materials. General principles
BS EN 60794-2:2003 BS EN 60794-2:2003. Optical fibre cables. Indoor cables. Sectional specification
ISO5275 : 2003 EDTN 2 ISO5275 : 2003 EDTN 2. ISO5275 : 2003 Aromatic hydrocarbons- Test for presence of mercaptans (thiols)- Doctor test
BS EN 62121:2001 BS EN 62121:2001. Methods of measurement for minidisc recorders/players
PAS 39:2003 PAS 39:2003. Management of public swimming pools. Water treatment systems, water treatment plant and heating and ventilation systems. Code of practice
BS ISO 14721:2003 BS ISO 14721:2003. Space data and information transfer systems. Open archival information systems. Reference model
BS ISO 17357:2002 BS ISO 17357:2002. Ships and marine technology. High-pressure floating pneumatic rubber fenders
BS EN 13761:2002 BS EN 13761:2002. Office furniture. Visitors chairs
BS EN 13925-2:2003 BS EN 13925-2:2003. Non-destructive testing. X-ray diffraction from polycrystalline and amorphous materials. Procedures
BS EN 13453-1:2004 BS EN 13453-1:2004. Furniture. Bunk beds and high beds for non-domestic use. Safety, strength and durability requirements
BS EN 12790:2002 BS EN 12790:2002. Child care articles. Reclined cradles
BS EN 1400-3:2002 BS EN 1400-3:2002. Child use and care articles. Soothers for babies and young children. Chemical requirements and tests
BS EN 1400-2:2002 BS EN 1400-2:2002. Child use and care articles. Soothers for babies and young children. Mechanical requirements and tests
BS EN 1400-1:2002 BS EN 1400-1:2002. Child use and care articles. Soothers for babies and young children. General safety requirements and product information
BS EN 71-7:2002 BS EN 71-7:2002. Safety of toys. Finger paints. Requirements and test methods
BS EN 61131-3:2003 BS EN 61131-3:2003. Programmable controllers. Programming languages
BS EN 60534-2-5:2003 BS EN 60534-2-5:2003. Industrial-process control valves. Flow capacity. Sizing equations for fluid flow through multistage control valves with interstage recovery
BS EN 13880-1:2003 BS EN 13880-1:2003. Hot applied joint sealants. Test method for the determination of density at 25°C
BS EN 13880-2:2003 BS EN 13880-2:2003. Hot applied joint sealants. Test method for the determination of cone penetration at 25°C
BS EN 13880-3:2003 BS EN 13880-3:2003. Hot applied joint sealants. Test method for the determination of penetration and recovery (resilience)
BS EN 60044-3:2003 BS EN 60044-3:2003. Instrument transformers. Combined transformers
PD ISO/IEC TR 20943-1:2003 PD ISO/IEC TR 20943-1:2003. Information technology. Procedures for achieving metadata registry (MDR) content consistency. Data elements
BS 341-4:2004 BS 341-4:2004. Transportable gas container valves. Pressure relief devices
ISO15622 : 2002 EDTN 1 ISO15622 : 2002 EDTN 1. ISO15622 : 2002 Road vehicles- Adaptive Cruise Control Systems- Performance requirements and test procedures
BS ISO 11338-1:2003 BS ISO 11338-1:2003. Stationary source emissions. Determination of gas and particle-phase polycyclic aromatic hydrocarbons. Sampling
BS EN 60749-15:2003 BS EN 60749-15:2003. Semiconductor devices. Mechanical and climatic test methods. Resistance to soldering temperature for through-hole mounted devices
BS EN 61291-4:2003 BS EN 61291-4:2003. Optical fibre amplifiers. Multichannel applications. Performance specification template


Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm

No comments:

Post a Comment