Cheapest & Latest BSI Standard (PDF) (15)

Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm


BS EN 4040:2006 BS EN 4040:2006. Aerospace series. Bearings, spherical plain in corrosion resisting steel with self-lubricating liner with wide inner ring. Elevated loads at ambient temperature. Dimensions and loads
06/30147250 DC 06/30147250 DC. EN ISO 3741. Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Precision methods for reverberation test rooms
06/30147145 DC 06/30147145 DC. EN 1570. Safety requirements for lifting tables
06/30147138 DC 06/30147138 DC. IEC PAS 61076-3-11X. Connectors for use in d.c., low-frequency analogueand digital high-speed data applications. Part 3-11X. Rectangular connectors. Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the 60603-7. Variant 14 related to IEC 61076-3-106 push pull coupling
06/30147135 DC 06/30147135 DC. HD 638 S2 AMD 1. Road traffic signal systems
06/30147121 DC 06/30147121 DC. IEC 61300-3-38. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-38. Measurement techniques for determination of the group delay and chromatic dispersion of passive components used in fibre optic communication systems
06/30147118 DC 06/30147118 DC. IEC 61020-1. Electromechanical switches for use in electrical and electronic equipment. Part 1. Generic specification
ISO8362-7 : 2006 EDTN2 ISO8362-7 : 2006 EDTN2. ISO8362-7 : 2006 Injection containers and accessories. Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part
CWA 15515:2006 CWA 15515:2006. European ICT skills meta-framework. State-of-the-art review, clarification of the realities, and recommendations for next steps
06/30147040 DC 06/30147040 DC. ISO 10303-28. Industrial automation systems and integration. #Product data representation and exchange. Part 28. Implementation methods. XML representations of express schemas and data
BIP 0026:2006 BIP 0026:2006. Complete ISMS BS ISO/IEC 27001 documentation toolkit CD-ROM. Including The Manager's guide to data security and BS 7779/ISO 17799.
06/30147008 DC 06/30147008 DC. EN 14188-4. Joint fillers and sealants. Part 4. Specifications for primers to be used with joint sealants
06/30147005 DC 06/30147005 DC. EN 15466-3. Primers for cold and hot applied joint sealants. Part 3. Test method for the determination of drying behaviour and solids content
06/30147002 DC 06/30147002 DC. EN 15466-2. Primers for cold and hot applied joint sealants. Part 2. Test method for the determination of resistance against alkali
06/30146999 DC 06/30146999 DC. EN 15466-1. Primers for cold and hot applied joint sealants. Part 1. Test method for the determination of homogeneity
06/30146993 DC 06/30146993 DC. IEC 61097-3. Global maritime distress and safety system (GMDSS). Part 3. Digital selective calling (DSC) equipment. Operational and performance requirements, methods of testing and required testing results
06/30146974 DC 06/30146974 DC. IEC 61000-3-2 AMD 1. Electromagnetic compatibility (EMC). Part 3-2. Limits. Limits for harmonic current emissions (equipment input current ? 16A per phase)
06/30146908 DC 06/30146908 DC. CENELEC HD 603 S1 AMD 3. Distribution cables of rated Voltage 0,6-1kv
BS ISO 5794-1:2005 BS ISO 5794-1:2005. Rubber compounding ingredients. Silica, precipitated, hydrated. Non-rubber tests
06/30146860 DC 06/30146860 DC. IEC 60191-2. Proposed new package outline. Small outline package (SOT) 3 -, 5- and 6-Lead SMD (to be published as 182E outline)
BS EN ISO 14880-4:2006 BS EN ISO 14880-4:2006. Optics and photonics. Microlens arrays. Test methods for geometrical properties
BS EN 62132-5:2006 BS EN 62132-5:2006. Integrated circuits. Measurement of electromagnetic immunity, 150 kHz to 1 GHz. Workbench Faraday cage method
06/30146812 DC 06/30146812 DC. ISO 18436-6. Condition monitoring and diagnostics of machines. Requirements for training and certification of personnel. Part 6. Acoustic emission
ERROR ERROR. BSISO/IEC1539-1 : 2004 CORR1 Information technology. Programming languages. Fortran. Part 1: Base Language
BS ISO 16220:2005 BS ISO 16220:2005. Magnesium and magnesium alloys. Magnesium alloy ingots and castings
PD CEN/TR 15349:2006 PD CEN/TR 15349:2006. Hardware for furniture. Terms for extension elements and their components
BS EN 60034-14:2004 BS EN 60034-14:2004. Rotating electrical machines. Mechanical vibration of certain machines with shaft heights 56 mm and higher. Measurement, evaluation and limits of vibration severity
06/30146756 DC 06/30146756 DC. IEC 61950. Cable management systems. Specifications for conduit fittings and accessories for cable installations for extra heavy duty electrical steel conduit
06/30146747 DC 06/30146747 DC. ISO 22007-2. Plastics. Determination of thermal conductivity and thermal diffusivity. Part 2. Transient plane heat source (hot disk) method
06/30146723 DC 06/30146723 DC. prEN 1627. Burglar resistant construction products (not for precast concrete parts). Requirements and classification
06/30146722 DC 06/30146722 DC. prEN 1628. Burglar resistant construction products (not for precast concrete parts). Test method for the determination of resistance under static loading
06/30146719 DC 06/30146719 DC. prEN 1629. Burglar resistant construction products (not for precast concrete parts). Test method for the determination of resistance under dynamic loading
06/30146718 DC 06/30146718 DC. prEN 1630. Burglar resistant construction products (not for precast concrete parts). Test method for the determination of resistance to manual burglary attempts
BIP 0009-2:2006 BIP 0009-2:2006. Code of practice for legal admissibility and evidential weight of information communicated electronically. Compliance workbook
BIP 0009-3:2006 BIP 0009-3:2006. Code of practice for legal admissibility and evidential weight of linking electronic identity to documents. Compliance workbook
BS EN 14073-2:2004 BS EN 14073-2:2004. Office furniture. Storage furniture. Safety requirements
06/30146590 DC 06/30146590 DC. IEC 61347-2-12 AMD 1. Lamp controlgear. Part 2-12. Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
CWA 15499-2:2006 CWA 15499-2:2006. Personal data protection audit framework (EU Directive 95/46/EC). Checklists, questionnaires and templates for users of the framework
CWA 15499-1:2006 CWA 15499-1:2006. Personal data protection audit framework (EU Directive 95/46/EC). Baseline framework
06/30146499 DC 06/30146499 DC. ISO 20957-10. Stationary training equipment. Part 10. Exercise bicycles with a fixed wheel or without freewheel additional specific safety requirements and test methods
06/30146489 DC 06/30146489 DC. ISO 10137. Basis for design of structures. Serviceability of buildings and walkways against vibrations
06/30146463 DC 06/30146463 DC. ISO 22111. Bases for design of structures. General requirements
06/30146412 DC 06/30146412 DC. ISO 21072-2. Ships and marine technology. Marine environment protection. Performance testing of oil skimmers. Part 2. Static water conditions
ISO/TS22964 : 2006 EDTN1 ISO/TS22964 : 2006 EDTN1. ISO/TS22964 : 2006 Milk and milk products - Determination of Enterobacter sakazakii
BS EN 750:2004 BS EN 750:2004. Playing field equipment. Hockey goals. Functional and safety requirements, test methods
BS EN ISO 13697:2006 BS EN ISO 13697:2006. Optics and photonics. Lasers and laser-related equipment. Test methods for specular reflectance and regular transmittance of optical laser components
06/30146290 DC 06/30146290 DC. EN 4632-2. Aerospace series. Welded and brazed assemblies for aerospace constructions. Weldability and brazeability of materials. Part 2. Homogeneous assemblies aluminium and aluminium alloys
BS EN ISO 7731:2005 BS EN ISO 7731:2005. Ergonomics. Danger signals for public and work areas. Auditory danger signals
06/30146278 DC 06/30146278 DC. ISO 17678. Milk fat. Detection of foreign fats by gas chromatographic analysis of triglycerides (reference method)
Test Material for Unicode Conversion Test Material for Unicode Conversion.
BS EN 50419:2005 BS EN 50419:2005. Marking of electrical and electronic equipment in accordance with article 11(2) of Directive 2002/96/EC (WEEE)
06/30146211 DC 06/30146211 DC. ISO 16895-1. Wood-based panels. Dry-process fibreboards. Part 1. Classifications
06/30146208 DC 06/30146208 DC. ISO 16893-1. Wood-based panels. Particleboard. Part 1. Classifications
BS 598-107:2004 BS 598-107:2004. Sampling and examination of bituminous mixtures for roads and other paved areas. Method of test for the determination of the composition of design surface course rolled asphalt
BS ISO 19005-1:2005 BS ISO 19005-1:2005. Document management. Electronic document file format for long-term preservation. Use of PDF 1.4 (PDF/A-1)
BS EN 2713-007:2005 BS EN 2713-007:2005. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 200°C. Screened (spiral) and jacketed, UV laser printable. Product standard
BS EN 2713-003:2005 BS EN 2713-003:2005. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 200 °C. Screened (spiral) and jacketed, ink jet printable. Product standard
06/30146128 DC 06/30146128 DC. ISO 9838. Alpine and touring ski-bindings. Test soles for ski-binding tests
BS EN 1996-1-1:2005 BS EN 1996-1-1:2005. Eurocode 6. Design of masonry structures. General rules for reinforced and unreinforced masonry structures
ISO13994 : 2005 EDTN2 ISO13994 : 2005 EDTN2. ISO13994 : 2005 Clothing for protection against liquid chemicals - Determination of the resistance of protective clothing materials to penetration by liquids under pressure
BS ISO/IEC 19784-1:2006+A1:2007 BS ISO/IEC 19784-1:2006+A1:2007. Information technology. Biometric application programming interface. BioAPI specification
06/30145906 DC 06/30145906 DC. ISO/IEC 26907. High rate ultra wideband PHY and MAC standard
ISO17369 : 2005 EDTN1 ISO17369 : 2005 EDTN1. ISO17369 : 2005 Statistical data and metadata exchange (SDMX)
ISO/PAS22720 : 2005 EDTN1 ISO/PAS22720 : 2005 EDTN1. ISO/PAS22720 : 2005 ASAM open data services 5.0
PD CEN/TR 15131:2006 PD CEN/TR 15131:2006. Thermal performance of building materials. The use of interpolating equations in relation to thermal measurement on thick specimens. Guarded hot plate and heat flow meter apparatus
BS EN 50117-2-4:2004+A1:2008 BS EN 50117-2-4:2004+A1:2008. Coaxial cables. Sectional specification for cables used in cabled distribution networks. Indoor drop cables for systems operating at 5 MHz - 3000 MHz
BS EN 50117-2-3:2004+A1:2008 BS EN 50117-2-3:2004+A1:2008. Coaxial cables. Sectional specification for cables used in cabled distribution networks. Distribution and trunk cables for systems operating at 5 MHz - 1000 MHz
BS EN 50117-2-1:2005+A1:2008 BS EN 50117-2-1:2005+A1:2008. Coaxial cables. Sectional specification for cables used in cabled distribution networks. Indoor drop cables for systems operating at 5 MHz - 1 000 MHz
06/30145534 DC 06/30145534 DC. EN 13803-1. Railway applicatiions. Track. Track alignment design parameters. Track gauges 1435 mm and wider. Part 1. Plain line
ISO/TS7240-9 : 2006 EDTN1 ISO/TS7240-9 : 2006 EDTN1. ISO7240-9 : 2006 Fire detection and alarm systems -. Part 9: Test fires for fire detectors
06/30145502 DC 06/30145502 DC. EN 4638. Aerospace series. Blast media. Brown corundum
06/30145499 DC 06/30145499 DC. EN 4637. Aerospace series. Blast media. White corundum
06/30145493 DC 06/30145493 DC. EN 4635. Aerospace series. Screws, 100° countersunk head, six lobes recess, short thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification. 1 270 MPa (at ambient temperature) / 600°C
06/30145490 DC 06/30145490 DC. EN 4634. Aerospace series. Screws, 100° countersunk head, six lobes recess, short thread, in heat resisting steel FE-PA2601, passivated. Classification. 900 MPa (at ambient temperature) / 650°C
06/30145453 DC 06/30145453 DC. IEC 62351-5. Data and communication security. Part 5. Security for IEC 60870-5 and derivatives
BS 7540-1:2005 BS 7540-1:2005. Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750 V. General guidance
06/30145366 DC 06/30145366 DC. EN ISO 26081. Leather. Physical and mechanical tests. Determination of soiling for domestic and contract upholstery leather
BS EN 2266-003:2005 BS EN 2266-003:2005. Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 200°C. Ink jet printable. Product standard
BS EN 3155-008:2005 BS EN 3155-008:2005. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, male, type A, crimp, class S. Product standard
06/30145247 DC 06/30145247 DC. IEC 60695-1-10. Fire hazard testing. Part 1-10. Guidance for assessing the fire hazard of electrotechnical products. General guidance
NA to BS EN 1990:2002+A1:2005 NA to BS EN 1990:2002+A1:2005. UK National Annex for Eurocode. Basis of structural design
06/30145241 DC 06/30145241 DC. IEC 60318-1. Electroacoustics. Simulators of human head and ear. Part 1. Ear simulator for the calibration of supra-aural and circumaural earphones
06/30145237 DC 06/30145237 DC. EN 2242. Aerospace series. Crimping of electric cables with conductors defined by EN 2083, EN 4434 and EN 2346
BIP 2081:2006 BIP 2081:2006. A Guide to Emergency Lighting
06/30145217 DC 06/30145217 DC. EN 671-2. Fixed firefighting systems. Hose systems. Part 2. Hose system with lay-flat hose
06/30145214 DC 06/30145214 DC. EN 671-1. Fixed firefighting systems. Hose systems. Part 1. Hose reels with semi-rigid hose
DD ISO/TS 10272-2:2006 DD ISO/TS 10272-2:2006. Microbiology of food and animal feeding stuffs. Horizontal method for detection and enumeration of Campylobacter spp. Colony-count technique
BS EN 4057-407:2005 BS EN 4057-407:2005. Aerospace series. Cable ties for harnesses. Test methods. Verification of application tool settings
BS EN 4057-305:2005 BS EN 4057-305:2005. Aerospace series. Cable ties for harnesses. Test methods. Colour fastness
BS EN 4057-303:2005 BS EN 4057-303:2005. Aerospace series. Cable ties for harnesses. Test methods. Resistance to fluids
BS EN 4057-202:2005 BS EN 4057-202:2005. Aerospace series. Cable ties for harnesses. Test methods. Examination of mass and dimensions
BS EN 4057-201:2005 BS EN 4057-201:2005. Aerospace series. Cable ties for harnesses. Test methods. Visual examination
BS EN 2267-008:2005 BS EN 2267-008:2005. Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 260°C. DM family, single UV laser printable and multicore assembly. Product standard
BS EN 2267-007:2005 BS EN 2267-007:2005. Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 260°C. DMA family, single ink-jet printable and multicore assembly. Product standard
BS EN 2267-003:2005 BS EN 2267-003:2005. Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 260°C. Inkjet printable. Product standard
BS ISO 13357-2:2005 BS ISO 13357-2:2005. Petroleum products. Determination of the filterability of lubricating oils. Procedure for dry oils
BS EN 3427:2006 BS EN 3427:2006. Aerospace series. Groove dimensions for radial mounting retaining rings
06/30145086 DC 06/30145086 DC. ISO 17365. Supply chain applications of RFID. Transport units
06/30145083 DC 06/30145083 DC. ISO 17366. Supply chain applications of RFID. Product packaging
06/30145080 DC 06/30145080 DC. ISO 17367. Supply chain applications of RFID. Product tagging. Part 2. Rendering and plastering mortar
06/30145074 DC 06/30145074 DC. ISO 17364. Supply chain applications of RFID. Returnable transport items (RTIs)
BS EN 612:2005 BS EN 612:2005. Eaves gutters with bead stiffened fronts and rainwater pipes with seamed joints made of metal sheet
BS EN 12285-2:2005 BS EN 12285-2:2005. Workshop fabricated steel tanks. Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids
06/30145038 DC 06/30145038 DC. IEC 60809 AMD 4. Filament lamps for road vehicles. Dimensional, electrical and luminous requirements
06/30145015 DC 06/30145015 DC. ISO 2107. Aluminium and aluminium alloys. Wrought products. Temper designations
ISO/IEC13818-7 : 2006 EDTN4 ISO/IEC13818-7 : 2006 EDTN4. ISO/IEC13818-7 : 2006 Generic coding of moving pictures and associated audio information. Part 7: Advanced Audio Coding (AAC)
06/30144913 DC 06/30144913 DC. EN 15420. Gas-fired central heating boilers. Type C boilers of nominal heat input exceeding 70 kW, but not exceeding 1000 kW
06/30144892 DC 06/30144892 DC. EN 13036-5. Road and airfield surface characteristics. Test methods. Part 5. Determination of longitudinal unevenness indices
06/30144884 DC 06/30144884 DC. EN 13050. Curtain walling. Watertightness. Laboratory test under dynamic condition of air pressure and water spray
06/30144881 DC 06/30144881 DC. EN 13420. Windows. Behaviour between different climates. Test method
06/30144823 DC 06/30144823 DC. IEC 60704-1 AMD 1. Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Part 1. General requirements
06/30144819 DC 06/30144819 DC. IEC 60311 AMD 2. Electric irons for household and similar use. Methods for measuring performance
BS ISO 3761:2005 BS ISO 3761:2005. Oil of rosewood, Brazilian type [Aniba rosaeodora Ducke var. amazonica Ducke or Aniba parviflora (Meissner) Mez]
BS EN 2754:2006 BS EN 2754:2006. Aerospace series. Nuts, anchor, self locking, two lug, floating with counterbore. Classification: 1100 MPa/235°C
BS EN 13421:2006 BS EN 13421:2006. Plastics. Thermoset moulding compounds. Composites and reinforcement fibres. Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
BS EN 13231-3:2006 BS EN 13231-3:2006. Railway applications. Track. Acceptance of works. Acceptance of rail grinding, milling and planing works in track
06/30144711 DC 06/30144711 DC. ISO 21650. Actions from waves and currents on coastal structures
06/30144687 DC 06/30144687 DC. IEC CISPR 16-1-5. Specification for radio disturbance and immunity measuring apparatus and methods. Part 1-5. Radio disturbance and immunity measuring apparatus. Antenna calibration test for 30 MHz to 1000 MHz
BS EN ISO 22870:2006 BS EN ISO 22870:2006. Point-of-care testing (POCT). Requirements for quality and competence
BS EN 2266-005:2005 BS EN 2266-005:2005. Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 200°C. UV laser printable. Product standard
BS 848-9:2006, ISO 13348:2006 BS 848-9:2006, ISO 13348:2006. Fans for general purposes. Tolerances, methods of conversion and technical data presentation
06/30144436 DC 06/30144436 DC. ISO 20441. Metallic powders. Determination of ejection force
06/30144397 DC 06/30144397 DC. IEC 60245-1 AMD 1. Rubber insulated cables. Rated voltages up to and including 450/750 V. Part 1. General requirements
06/30144394 DC 06/30144394 DC. IEC 60227-1 AMD 3. Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V. Part 1. General requirements
06/30144391 DC 06/30144391 DC. IEC 60331-31. Tests for electric cables under fire conditions. Circuit integrity. Part 31. Procedures and requirements for fire with shock. Cables of rated voltage up to and including 0,6/1,0 kV
06/30144382 DC 06/30144382 DC. IEC 60331-12. Tests for electric cables under fire conditions. Circuit integrity. Part 12. Apparatus. Fire with shock at a flame temperature of at least 830°C
06/30144379 DC 06/30144379 DC. IEC 60331-11 AMD 1. Tests for electric cables under fire conditions.Circuit integrity. Part 11. Apparatus. Fire alone at a flame temperatureof at least 750 °C
BS 6172:2004 BS 6172:2004. Installation and maintenance of domestic gas cooking appliances (2nd and 3rd family gases). Specification
BS EN ISO 21898:2005 BS EN ISO 21898:2005. Packaging. Flexible intermediate bulk containers (FIBCs) for non-dangerous goods
BIP 2109:2006 BIP 2109:2006. The design, installation, commissioning and maintenance of fire detection and fire alarm systems. A Guide to BS 5839-1
BIP 3045:2006 BIP 3045:2006. Stainless steels and delivery conditions CD-ROM
06/30144252 DC 06/30144252 DC. ISO 12466-2. Plywood. Bonding quality. Part 2. Requirements
06/30144246 DC 06/30144246 DC. ISO 12466-1. Plywood. Bonding quality. Part 1. Test methods
BS EN 3155-023:2006 BS EN 3155-023:2006. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, rectangular, female, type A, crimp, class R. Product standard
BS ISO 13203:2006 BS ISO 13203:2006. Chains, sprockets and accessories. List of equivalent terms
06/30144112 DC 06/30144112 DC. IEC 60061-1 AMD 38. Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1. Lamp caps. Amendment 38. Part 2. Lampholders. Amendment 35. Part 3. Gauges. Amendment 37.
06/30144095 DC 06/30144095 DC. ISO 5002. Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities
06/30144083 DC 06/30144083 DC. ISO 4996. Hot-rolled steel sheet of high yield stress structural quality
06/30144080 DC 06/30144080 DC. ISO 3574. Cold-reduced carbon steel sheet of commercial and drawing qualities
BS EN ISO 5172:2006 BS EN ISO 5172:2006. Gas welding equipment. Blowpipes for gas welding, heating and cutting. Specifications and tests
05/30144053 DC 05/30144053 DC. IEC 61029-2-12. Safety of transportable motor-operated electric tools. Part 2-12. Particular requirements for threading machines
IEC62013-2 : 2005 (TEXT) EDTN2 IEC62013-2 : 2005 (TEXT) EDTN2.
BS 5709:2006 BS 5709:2006. Gaps, gates and stiles. Specification
BS 4008:2006 BS 4008:2006. Specification for cattle grids
05/30143972 DC 05/30143972 DC. IEC 61753-051-3. Fibre optic interconnecting devices and passive components performance standard. Part 051-3. Single-mode fibre, plug-style fixed attenuators for Category U. Uncontrolled environment
WD/ISO/IEC14496-10 : 2005 EDTN3 WD/ISO/IEC14496-10 : 2005 EDTN3. ISO/IEC14496-10 : 2005 Coding of audio-visual objects. Part 10: Advanced video coding
05/30143920 DC 05/30143920 DC. IEC 60079-18. Explosive atmospheres. Part 18. Electrical equipment. Requirements for encapsulation "m"
05/30143916 DC 05/30143916 DC. EN 60730-1 AMD 1. Automatic electrical controls for household and similar use. Part 1. General requirements
PD IEC/TR 62263:2005 PD IEC/TR 62263:2005. Live working. Guidelines for the installation and maintenance of optical fibre cables on overhead power lines
BIP 0034:2006 BIP 0034:2006. Achieving ISO/IEC 20000. Finance for service managers
BIP 0033:2006 BIP 0033:2006. Achieving ISO/IEC 20000. Managing end-to-end service
BIP 0032:2006 BIP 0032:2006. Achieving ISO/IEC 20000. Making metrics work
BIP 0031:2006 BIP 0031:2006. Achieving ISO/IEC 20000. Why people matter
BIP 0030:2006 BIP 0030:2006. Achieving ISO/IEC 20000. Management decisions
BS 2000-182:2006, IP 182:2006 BS 2000-182:2006, IP 182:2006. Methods of test for petroleum and its products. Determination of inorganic acidity of petroleum products. Colour indicator titration method
BS EN ISO 15902:2005 BS EN ISO 15902:2005. Optics and photonics. Diffractive optics. Vocabulary
05/30143769 DC 05/30143769 DC. IEC 60068-2-53. Environmental testing. Part 2-53. Tests. Guidance to Tests Z/AFc and Z/BFc. Combined temperature (cold and dry heat) and vibration (sinusoidal) tests
PD ISO/IEC TR 18046:2005 PD ISO/IEC TR 18046:2005. Information technology. Automatic identification and data capture techniques. Radio frequency identification device performance test methods
05/30143647 DC 05/30143647 DC. ISO 14625. Space systems. Ground support equipment for use at launch, landing, or retrieval sites. General requirements
BS EN 62054-21:2004 BS EN 62054-21:2004. Electricity metering equipment (a.c.). Tariff and load control. Particular requirements for time switches
BS EN 62052-21:2004 BS EN 62052-21:2004. Electricity metering equipment (a.c.). General requirements, tests and test conditions. Tariff and load control equipment
CWA 15464-5:2005 CWA 15464-5:2005. Humanitarian mine action. EOD competency standards. Competency for EOD level 3
CWA 15464-4:2005 CWA 15464-4:2005. Humanitarian mine action. EOD competency standards. Competency for EOD level 4
CWA 15464-3:2005 CWA 15464-3:2005. Humanitarian mine action. EOD competency standards. Competency for EOD level 1
CWA 15464-2:2005 CWA 15464-2:2005. Humanitarian mine action. EOD competency standards. Competency matrix
CWA 15464-1:2005 CWA 15464-1:2005. Humanitarian mine action. EOD competency standards. General requirements
BS ISO 15031-6:2005 BS ISO 15031-6:2005. Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics. Diagnostic trouble code definitions
05/30143464 DC 05/30143464 DC. IEC 61508-4. Functional safety of electrical/electronic/programmable electronic safety. Part 4. Definitions and abbreviations
05/30143460 DC 05/30143460 DC. IEC 61508-3. Functional safety of electrical/electronic/programmable electronic safety. Part 3. Software requirements
05/30143456 DC 05/30143456 DC. IEC 61508-2. Functional safety of electrical/electronic/programmable electronic safety. Part 2. Requirements for electrical/electronic/programmable electronic/programmable electronic safety-related systems
05/30143452 DC 05/30143452 DC. IEC 61508-1. Functional safety of electrical/electronic/programmable electronic safety. Part 1. General requirements
BS EN 13871:2005 BS EN 13871:2005. Food processing machinery. Cubes cutting machinery. Safety and hygiene requirements
05/30143431 DC 05/30143431 DC. IEC 61000-4-3 AMD 2. Electromagnetic compatibility (EMC). Testing and measurement techniques. Radiated radio-frequency. Electromagnetic field immunity
BS EN 50308:2004 BS EN 50308:2004. Wind turbines. Protective measures. Requirements for design, operation and maintenance
PD CLC/TR 50426:2004 PD CLC/TR 50426:2004. Assessment of inadvertent initiation of bridge wire electro-explosive devices by radio-frequency radiation. Guide
BS EN 491:2004 BS EN 491:2004. Concrete roofing tiles and fittings for roof covering and wall cladding.Test methods
BS EN 10298:2005 BS EN 10298:2005. Steel tubes and fittings for onshore and offshore pipelines. Internal lining with cement mortar
BS EN ISO 17693:2005 BS EN ISO 17693:2005. Footwear. Test methods for uppers. Resistance to damage on lasting
BS EN 3709:2006 BS EN 3709:2006. Aerospace series. Wrenches and sockets, bi-hexagonal. Technical specification
BIP 3070:2005 BIP 3070:2005. Software calculator. Code of practice for fire safety in the design, construction and use of buildings (web-based software for DD 9999)
KIT 186 KIT 186. Carbon monoxide in dwellings kit
BS ISO/IEC 15459-1:2006 BS ISO/IEC 15459-1:2006. Information technology. Unique identifiers. Unique identifiers for transport units
BS EN 4311:2006 BS EN 4311:2006. Aerospace series. Studs, coarse tolerance reduced shank, medium length threads, in heat and corrosion resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature) / 315°C
BS EN 62054-11:2004 BS EN 62054-11:2004. Electricity metering equipment (a.c.). Tariff and load control. Particular requirements for electronic ripple control receivers
PD CEN/TR 1295-2:2005 PD CEN/TR 1295-2:2005. Structural design of buried pipelines under various conditions of loading. Summary of nationally established methods of design
05/30143184 DC 05/30143184 DC. EN 267. Automatic forced draught burners for liquid fuels
PAS 76:2006 PAS 76:2006. Accounting software. Valued Added Tax in the UK. Specification
DD ISO/TS 9941:2005 DD ISO/TS 9941:2005. Milk and canned evaporated milk. Determination of tin content. Spectrometric method
ISO/IEC25435 : 2006 EDTN1 ISO/IEC25435 : 2006 EDTN1. ISO/IEC 25435 Data Interchange on 60 mm Read-Only ODC - Capacity: 1,8 Gbytes (UMDTM)
WD/ISOIEC25434 : 2006 EDTN1 WD/ISOIEC25434 : 2006 EDTN1. ISO/IEC25434 : 2006 Data interchange on 120 mm and 80 mm Optical Disk using +R DL Format -- Capacity; 8,55 and 2,66 Gbytes per Side (Recording speed 2,4x )
BS EN 2267-002:2005 BS EN 2267-002:2005. Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 260°C. General
05/30142992 DC 05/30142992 DC. EN 50176. Automatic electrostatic spraying equipment for flammable liquid spraying material
BS EN 3545-007:2005 BS EN 3545-007:2005. Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C. Cable clamp. Product standard
BS EN 3545-004:2005 BS EN 3545-004:2005. Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C. Connectors with male contacts. Product standard
BS EN 3545-003:2005 BS EN 3545-003:2005. Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C. Connectors with female contacts. Product standard
BS EN 3545-002:2005 BS EN 3545-002:2005. Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55°C to 175°C. Specification of performance and contact arrangements
BS EN 3545-001:2005 BS EN 3545-001:2005. Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -5 °C to 175 °C. Technical specification
BS EN 12912:2005 BS EN 12912:2005. Products used for treatment of water intended for human consumption. Barite
BS ISO/IEC 17799:2005 (French version), BS 7799-1:2005 BS ISO/IEC 17799:2005 (French version), BS 7799-1:2005. Technologies de l'information. Techniques de securite. Code de bonne practique pour la gestion de la securite de l'information (French translation of BS ISO/IEC 17799:2005)
BS 2000-135:2005, IP 135:2005 BS 2000-135:2005, IP 135:2005. Methods of test for petroleum and its products. Determination of rust-preventing characteristics of steam-turbine oil in the presence of water
WD/IECPAS62410 : 2005 EDTN1 WD/IECPAS62410 : 2005 EDTN1. ISO/IECPAS 62410 : 2005 Real-time Ethernet SERCOS III
BS ISO 12647-4:2005 BS ISO 12647-4:2005. Graphic technology. Process control for the production of half-tone colour separations, proofs and production prints. Publication gravure printing
WD/PD5500 : 2003 TEXT (11/05) WD/PD5500 : 2003 TEXT (11/05). Specification for unfired fusion welded pressure vessels
06/30142617 DC 06/30142617 DC. ISO 23813. Cranes. Training of appointed persons
06/30142613 DC 06/30142613 DC. ISO 23814. Cranes. Competency requirements for crane inspectors
06/30142610 DC 06/30142610 DC. ISO 23815-1. Cranes. Maintenance. Part 1. General
BS EN 4495:2006 BS EN 4495:2006. Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series. Classification: 1100 MPa (at ambient temperature) / 315°C
05/30142504 DC 05/30142504 DC. EN ISO 4254-10. Agricultural machinery. Safety. Part 10. Rotary tedders and rakes
05/30142494 DC 05/30142494 DC. EN 13608-3. Health informatics. Security for healthcare communication. Part 3. Secure data channels
05/30142491 DC 05/30142491 DC. EN 13608-2. Health informatics. Security for healthcare communication. Part 2. Secure data objects
05/30142488 DC 05/30142488 DC. EN 13608-1. Health informatics. Security for healthcare communication. Part 1. Concepts and terminology
05/30142457 DC 05/30142457 DC. BS EN 15416-1. Adhesives for load bearing timber structures. Test methods. Part 1. Static load test of single bondline specimens in compression shear
05/30142419 DC 05/30142419 DC. IEC 61045-1. Fixed film resistor networks for use in electronic equipment. Part 1. Generic specification
CWA 15455:2005 CWA 15455:2005. A European model for learner competencies
CWA 15454:2005 CWA 15454:2005. A Simple query interface specification for learning repositories
BS EN 50419:2006 BS EN 50419:2006. Marking of electrical and electronic equipment in accordance with article 11(2) of Directive 2002/96/EC (WEEE)
CWA 15453:2005 CWA 15453:2005. Harmonisation of vocabularies for elearning
05/30142377 DC 05/30142377 DC. IEC 61949. Ultrasonics. Field Characterization. In-situ exposure estimation in finite-amplitude ultrasonic beams
DD ISO/PAS 28000:2005 DD ISO/PAS 28000:2005. Specification for security management systems for the supply chain
05/30142367 DC 05/30142367 DC. IEC 61869-1. Common Clauses for Instrument Transformers (fragment 1 & 2)
05/30142363 DC 05/30142363 DC. IEC 60044-1. Instrument transformers. Part 1. Current transformers
05/30142359 DC 05/30142359 DC. IEC 62414. Rules for the determination of the uncertainties in the measurement of instrument transformer errors
06/30142327 DC 06/30142327 DC. EN 50119. Railway applications. Fixed installations. Electric traction overhead contact lines
BIP 0039:2006 BIP 0039:2006. The differences between BS 15000 & ISO/IEC 20000
BIP 3061:2005 BIP 3061:2005. Manual handling. The facts - Video
BIP 3051:2005 BIP 3051:2005. Manual handling. The facts - DVD
BIP 3050:2005 BIP 3050:2005. Food hygiene - Video
BIP 3060:2005 BIP 3060:2005. Slips, trips and falls. The facts - Video
BIP 3049:2005 BIP 3049:2005. Slips, trips and falls. The facts - DVD
BIP 3059:2005 BIP 3059:2005. Electrical safety. The facts - Video
BIP 3048:2005 BIP 3048:2005. Electrical safety. The facts - DVD
BIP 3062:2005 BIP 3062:2005. Risk assessment. The facts - Video
BIP 3067:2005 BIP 3067:2005. Introduction to Health and safety. The facts - Video
BIP 3057:2005 BIP 3057:2005. Introduction to health and safety. The facts - DVD
BIP 3066:2005 BIP 3066:2005. Driving safely. The facts - Video
BIP 3056:2005 BIP 3056:2005. Driving safely. The facts - DVD
BIP 3065:2005 BIP 3065:2005. Stress in the workplace. The facts - Video
BIP 3055:2005 BIP 3055:2005. Stress in the workplace. The facts - DVD
BIP 3064:2005 BIP 3064:2005. Fire safety essentials. The facts - Video
BIP 3054:2005 BIP 3054:2005. Fire safety essentials. The facts - DVD
BIP 3063:2005 BIP 3063:2005. Fire risk assessment. The facts - Video
BIP 3053:2005 BIP 3053:2005. Fire risk assessment. The facts - DVD
BIP 3052:2005 BIP 3052:2005. Risk assessment. The facts - DVD
BS 7000-6:2005 (large print version) BS 7000-6:2005 (large print version). Design management systems. Managing inclusive design. Guide
BS 7000-6:2005 BS 7000-6:2005. Design management systems. Managing inclusive design. Guide
BS ISO 20401:2005 BS ISO 20401:2005. Pneumatic fluid power systems. Directional control valves. Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm
KIT 185, BS EN 1991-1-1 KIT 185, BS EN 1991-1-1. BS EN 1991-1-1 and UK National Annex kit. Eurocode 1. Actions on structures. General actions. Densities, self-weight, imposed loads for buildings
KIT 184, BS EN 1992-1-1 KIT 184, BS EN 1992-1-1. BS EN 1992-1-1 and UK National Annex kit. Eurocode 2. Design of concrete structures. General rules and rules for buildings
KIT 183, BS EN 1991-1-3 KIT 183, BS EN 1991-1-3. BS EN 1991-1-3 and UK National Annex kit. Eurocode 1. Actions on structures. General actions. Snow loads
KIT 182, BS EN 1992-1-2 KIT 182, BS EN 1992-1-2. BS EN 1992-1-2 and UK National Annex kit. Eurocode 2. Design of concrete structures. General rules. Structural fire design
BS EN ISO 13792:2005 BS EN ISO 13792:2005. Thermal performance of buildings. Calculation of internal temperatures of a room in summer without mechanical cooling. Simplified methods
BS 7959-1:2004 BS 7959-1:2004. Materials used for the control of liquid spillages. Determination of sorbency
05/30142150 DC 05/30142150 DC. IEC CISPR 11 ED 5. Industrial, scientific and medical (ISM) radio-frequency equipment and similar equipment. Radio-frequency disturbance characteristics. Limits and methods of measurement
BS EN ISO 15236-1:2005 BS EN ISO 15236-1:2005. Steel cord conveyor belts. Design, dimensions and mechanical requirements for conveyor belts for general use
05/30142015 DC 05/30142015 DC. ISO 15822. Test method of doorset opening performance in diagonal deformation. Seismic aspects
ISO/IECTR19764 : 2005 EDTN1 ISO/IECTR19764 : 2005 EDTN1. ISO/IECTR19764 : 2005 Information technology - Guidelines, methodology and reference criteria for cultural and linguistic adaptability in information technology products
ISO11435 : 2005 EDTN1 ISO11435 : 2005 EDTN1. ISO11435 : 2005 Nickel alloys - Determination of molybdenum - Inductively coupled plasma atomic emission spectrometric method
05/30141855 DC 05/30141855 DC. ISO 6944-1. Fire containment. Elements of building construction. Part 1. Ventilation ducts
BS EN 4401:2006 BS EN 4401:2006. Aerospace series. Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series. Classification: 1100 MPa (at ambient temperature) / 315°C
05/30141836 DC 05/30141836 DC. BS 8418 AMD 2. Installation and remote monitoring of CCTV systems
BS ISO 15863:2003 BS ISO 15863:2003. Space systems. Spacecraft-to-launch-vehicle interface control document
KIT 181 KIT 181. BS EN 10088 Stainless steels kit
DD IEC/PAS 62435:2005 DD IEC/PAS 62435:2005. Electronic components. Long duration storage of electronic components. Guidance for implementation
BS EN 3719:2005 BS EN 3719:2005. Aerospace series. Aluminium or aluminium alloy conductors for electrical cables. Product standard
BS EN 2714-007:2005 BS EN 2714-007:2005. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°C. Screened (spiral) and jacketed, UV laser printable. Product standard
BS EN 2714-011:2005 BS EN 2714-011:2005. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°C. DM family, screened (spiral) and jacketed, UV laser printable. Product standard
BS EN 2714-012:2005 BS EN 2714-012:2005. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°C. DM family, screened (braided) and jacketed, UV laser printable. Product standard
BS ISO 12744:2006 BS ISO 12744:2006. Copper, lead, zinc and nickel concentrates. Experimental methods for checking the precision of sampling
BS EN 3155-003:2005 BS EN 3155-003:2005. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female, type A, crimp, class S. Product standard
05/30141722 DC 05/30141722 DC. ISO 13709. Centrifugal pumps for petroleum, petrochemical and natural gas industries
05/30141652 DC 05/30141652 DC. CENELEC TS 50272-1. Safety requirements for secondary batteries and battery installations. Part 1. General safety information.
BS EN ISO 22803:2005 BS EN ISO 22803:2005. Dentistry. Membrane materials for guided tissue regeneration in oral and maxillofacial surgery. Contents of a technical file
BS ISO 8133:2006 BS ISO 8133:2006. Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) compact series. Mounting dimensions for accessories
PAS78 : 2006 WELSH TRANSLATION PAS78 : 2006 WELSH TRANSLATION. PAS78 : 2006 (Welsh Translation) Guide to good practice in commissioning accessible websites
BS ISO/IEC 7501-3:2005 BS ISO/IEC 7501-3:2005. Identification cards. Machine readable travel documents. Machine readable official travel documents
BS ISO/IEC 7501-1:2005 BS ISO/IEC 7501-1:2005. Identification cards. Machine readable travel documents. Machine readable passport
05/30141456 DC 05/30141456 DC. ISO 16368. Mobile elevating work platforms. Design, calculations, safety requirements and test methods
05/30141435 DC 05/30141435 DC. EN 61008-1. Residual current operated circuit-breakers without intergral overcurrent protection for household and similar uses (RCCB's). Part 1. General rules
BS EN 517:2006 BS EN 517:2006. Prefabricated accessories for roofing. Roof safety hooks
05/30141329 DC 05/30141329 DC. EN 15383. Plastics piping systems for drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP). Manholes and inspection chambers
05/30141310 DC 05/30141310 DC. ISO 845. Cellular plastics and rubbers. Determination of apparent density
05/30141254 DC 05/30141254 DC. IEC 60335-2-106 AMD 1. Household and similar electrical appliances. Safety. Part 2-106. Particular requirements for heated carpets and heating units for room heating installed under removable floor coverings
BS EN ISO 15996:2005+A1:2007 BS EN ISO 15996:2005+A1:2007. Gas cylinders. Residual pressure valves. General requirements and type testing
BS 4987-1:2005 BS 4987-1:2005. Coated macadam (asphalt concrete) for roads and other paved areas. Specification for constituent materials and for mixtures
05/30141195 DC 05/30141195 DC. IEC 60076-15. Power transformers. Part 15. Gas-filled type power transformers
PD 6687:2006 PD 6687:2006. Background paper to the UK National Annexes to BS EN 1992-1
ISO/TR20514 : 2005 EDTN1 ISO/TR20514 : 2005 EDTN1. ISO/TR20514 : 2005 Health informatics - Electronic health record - Definition, scope and context
05/30141105 DC 05/30141105 DC. EN 4624. Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting nickel base alloy Ni-P101HT (WASPALOY), silver plating
05/30141104 DC 05/30141104 DC. BS EN 4623. Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting nickel base alloy Ni-P100HT (Inconel 718), silver plating
05/30141100 DC 05/30141100 DC. EN 4622. Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting steel FE-PA2601 (A286), MoS2
05/30141096 DC 05/30141096 DC. BS EN 4622. Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting steel FE-PA2601 (A286), MoS2 coated
05/30141093 DC 05/30141093 DC. EN 4620. Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys. Design standard
05/30141031 DC 05/30141031 DC. IEC 62446. Grid connected photovoltaic systems. Minimum system documentation, commissioning tests and inspection
05/30141026 DC 05/30141026 DC. ISO 17123-8. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 8. GNSS field measurement systems in real-time kinematic (RTK)
ISO/IECTR22767 : 2005 EDTN 1 ISO/IECTR22767 : 2005 EDTN 1. ISO/IECTR22767 : 2005 Information technology - Telecommunications and information exchange between systems - Using CSTA for SIP phone user agents (uaCSTA)
KIT 180 KIT 180. Asphalt/macadam for roads and other paved areas
BS ISO 9874:2006 BS ISO 9874:2006. Milk. Determination of total phosphorus content. Method using molecular absorption spectrometry
BS ISO 7839:2005 BS ISO 7839:2005. Textile machinery and accessories. Knitting machines. Vocabulary andclas sification
BS ISO 15031-5:2006 BS ISO 15031-5:2006. Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics. Emissions-related diagnostic services
BS EN 4174:2006 BS EN 4174:2006. Aerospace series. Collars, swage locking, sheartype, in aluminium alloy 2024, anodized or chromated, metric series
BS EN 4173:2006 BS EN 4173:2006. Aerospace series. Lockbolts, 100 countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series. Classification: 1100 MPa (at ambient temperature) / 315°C
05/30140855 DC 05/30140855 DC. IEC 61196-1-313. Coaxial communication cables. Mechanical test methods. Part 1-313. Adhesion of dielectric and sheath
05/30140853 DC 05/30140853 DC. IEC 61196-1-205. Coaxial communication cables. Environmental test methods. Part 1-205. Resistance to solvents and contaminating fluids
05/30140851 DC 05/30140851 DC. IEC 61196-1-212. Coaxial communication cables. Environmental test methods. Part 1-212. UV resistance
BS EN 4172:2006 BS EN 4172:2006. Aerospace series. Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series. Classification: 1 100 MPa (at ambient temperature) / 315°C
BS EN 1991-4:2006 BS EN 1991-4:2006. Eurocode 1. Actions on structures. Silos and tanks
06/30140751 DC 06/30140751 DC. ISO 17052. Rubber, raw. Determination of residual monomers and other volatile low-molecular-mass compounds by capillary gas chromatography. Thermal desorption (dynamic headspace) method
BS ISO 5389:2005 BS ISO 5389:2005. Turbocompressors. Performance test code
BS 594-1:2005 BS 594-1:2005. Hot rolled asphalt for roads and other paved areas. Specification for constituent materials and asphalt mixtures
KIT 20 KIT 20. Information security standards kit
05/30140648 DC 05/30140648 DC. ISO 8437. Snowthrowers. Safety requirements and test procedures
05/30140616 DC 05/30140616 DC. BS EN 15366. Winter and road service area maintenance equipment. Solid absorbents intended for road usage
KIT 179 KIT 179. Sampling kit
PD EN 14035-33:2006 PD EN 14035-33:2006. Fireworks. Spinners. Specification and test methods
BS EN 14035-25:2005 BS EN 14035-25:2005. Fireworks. Party poppers. Specification and test methods
PD EN 14035-21:2005 PD EN 14035-21:2005. Fireworks. Jumping ground spinners. Specification and test methods
06/30140504 DC 06/30140504 DC. IEC 61156-8. Multicore and symmetrical pair/quad Cables for digital communications. Part 8. Symmetrical pair/quad cables with transmission characteristics up to 1200 MHz. Work area wiring. Sectional specification
05/30140495 DC 05/30140495 DC. IEC 61298-4 ED 2. Process measurement and control. General methods and procedures for evaluating performance. Part 4. Evaluation report content
05/30140491 DC 05/30140491 DC. IEC 61298-3 ED 2. Process measurement and control. General methods and procedures for evaluating performance. Part 3. Tests for the effects of influence quantities
05/30140487 DC 05/30140487 DC. IEC 61298-2 ED 2. Process measurement and control. General methods and procedures for evaluating performance. Part 2. Tests reference conditions
05/30140483 DC 05/30140483 DC. IEC 61298-1 ED 2. Process measurement and control. General methods and procedures for evaluating performance. Part 1. General considerations
BIP 3058:2005 BIP 3058:2005. The power of process auditing - DVD & CD
05/30140438 DC 05/30140438 DC. IEC 60335-2-27 AMD 2. Household and similar electrical appliances. Safety. Part 2-27. Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation
05/30140402 DC 05/30140402 DC. ISO/IEC 8802-11 AMD 7. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements. Part 11. Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications
BS 5306-1:2006 BS 5306-1:2006. Code of practice for fire extinguishing installations and equipment on premises. Hose reels and foam inlets
ISO/IWA4 : 2005 ISO/IWA4 : 2005 . ISO/IWA4 : 2005 Quality management systems. Guidelines for the application of ISO9001 : 2000 in local goventment
05/30140086 DC 05/30140086 DC. EN 3475-505. Aerospace series. Cables, electrical, aircraft use. Test methods. Part 505. Tensile test on conductors and strands
DD IEC/PAS 62437:2005 DD IEC/PAS 62437:2005. Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices. Limits and methods of measurement. Specifications for active antennas
BIP 0023:2005 BIP 0023:2005. Proteus compliance consultant
05/30139998 DC 05/30139998 DC. ISO 7176-19. Wheelchairs. Part 19. Wheeled mobility devices for use as seats in motor vehicles
BS ISO 11866-2:2005 BS ISO 11866-2:2005. Milk and milk products. Enumeration of presumptive Escherichia coli. Colony-count technique at 44°C using membranes
BS ISO 11866-1:2005 BS ISO 11866-1:2005. Milk and milk products. Enumeration of presumptive Escherichia coli. Most probable number technique using 4-methylumbelliferyl-β-D-glucuron ide(MUG)
ISO/IWA3 : 2005 ISO/IWA3 : 2005 . ISO/IWA3 : 2005 Image safety. Reducing the incience of undesirable biomedical effects caused by visual image sequences.
05/30139930 DC 05/30139930 DC. IEC 60684-3-246 ED 3. Flexible insulating sleeving. Part 3. Specifications for individual types of sleeving. Sheet 246. Heatshrinkable polyolefin sleeving, dual wall, not flame retarded
BS EN 13914-2:2005 BS EN 13914-2:2005. Design, preparation and application of external rendering and internal plastering. Design considerations and essential principles for internal plastering
BS EN 13914-1:2005 BS EN 13914-1:2005. Design, preparation and application of external rendering and internal plastering. External rendering
ISO IWA 1 : 2005 ISO IWA 1 : 2005 . ISO IWA 1 : 2005 Quality Management Systems - Guidelines for process improvements in health service organizations
BIP 0024:2005 BIP 0024:2005. Proteus compliance evaluation
05/30139861 DC 05/30139861 DC. ISO 15706 AMD 1. Information and documentation. International Standard Audiovisual Number (ISAN)
BIP 2039:2005 BIP 2039:2005. ISO 9000 Quality management. Achieving registration ((Sale suspended pending the publication of an A5 laminated version of BS EN ISO 9001:2008.)
BIP 3047:2005 BIP 3047:2005. ISO 9000 Quality management systems CD-ROM
BIP 3014:2005 BIP 3014:2005. ISO 9000 Quality management. Achieving registration CD-ROM
BS ISO 15585:2006 BS ISO 15585:2006. Hard coal. Determination of caking index
BS EN ISO 1101:2005 BS EN ISO 1101:2005. Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out
05/30139505 DC 05/30139505 DC. BS EN ISO 6185-4. Inflatable boats. Part 4. Boats with an overall length of between 8m and 24m and with a motor maximum power rating of 75kW and greater
BS 5837:2005 BS 5837:2005. Trees in relation to construction. Recommendations
ISO22033 : 2005 EDTN1 ISO22033 : 2005 EDTN1. ISO22033 : 2005 Nickel alloys - Determination of niobium content - Inductively coupled plasma atomic emmision spectrometric method
BS ISO 8967:2005 BS ISO 8967:2005. Dried milk and dried milk products. Determination of bulk density
PAS78 : 2005 Audio format PAS78 : 2005 Audio format. PAS78 : 2005 (Audio Format) Guide to good practice in commissioning accessible websites
PAS78 : 2005 CD ROM Format PAS78 : 2005 CD ROM Format. PAS78 : 2005 (Disk Format) Guide to good practice in commissioning accessible websites
PAS78 : 2005 Large Print PAS78 : 2005 Large Print. PAS78 : 2005 (Large Print) Guide to good practice in commissioning accessible websites
PAS78 : 2005 Easyread Format PAS78 : 2005 Easyread Format. PAS78 : 2005 (Easyread format) Guide to good practice in commissioning accessible websites
ISO16732 : 2005 EDTN 1 ISO16732 : 2005 EDTN 1. ISO16732 : 2005 Fire safety engineering - Guidance on fire risk assessment
05/30139447 DC 05/30139447 DC. ISO 21601. Guidelines for assessing the significance of stress corrosion cracks detected in service
BS ISO/IEC 11694-6:2006 BS ISO/IEC 11694-6:2006. Identification cards. Optical memory cards. Linear recording method. Use of biometrics on an optical memory card
BS ISO/IEC 11694-5:2006 BS ISO/IEC 11694-5:2006. Identification cards. Optical memory cards. Linear recording method. Data format for information interchange for applications using ISO/IEC 11694-4, annex B
BS EN ISO 4491-3:2006 BS EN ISO 4491-3:2006. Metallic powders. Determination of oxygen content by reduction methods. Hydrogen-reducible oxygen
BS EN ISO 13944:2006 BS EN ISO 13944:2006. Lubricated metal-powder mixes. Determination of lubricant content. Modified Soxhlet extraction method
BS EN ISO 3738-2:2006 BS EN ISO 3738-2:2006. Hardmetals. Rockwell hardness test (scale A). Preparation and calibration of standard test blocks
BS EN ISO 291:2005 BS EN ISO 291:2005. Plastics. Standard atmospheres for conditioning and testing
BS ISO 12647-2:2004 BS ISO 12647-2:2004. Graphic technology. Process control for the production of half-tone colour separations, proof and production prints. Offset lithographic processes
05/30139275 DC 05/30139275 DC. EN 624 AMD 1. Specification for dedicated LPG appliances. Room sealed LPG space heating equipment for installation in vehicles and boats
05/30139208 DC 05/30139208 DC. HD 361 S3 AMD 1. System for cable designation
06/30139194 DC 06/30139194 DC. ISO 8124-2. Safety of toys. Part 2. Flammability
06/30139190 DC 06/30139190 DC. ISO 8124-1 AMD 2. Safety of toys. Part 1. Safety aspects related to mechanical and physical properties
KIT 178 KIT 178. Conformity assessment kit no. 2
KIT 177 KIT 177. Conformity assessment kit
BS EN 4460:2005 BS EN 4460:2005. Aerospace series. Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel. Installation and removal procedure
BS EN 4459:2005 BS EN 4459:2005. Aerospace series. Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel. Design standard
BS EN 4175:2005 BS EN 4175:2005. Aerospace series. Collars, flanged swage locking, sheartype, in titanium TI-P99002, metric series
BS EN 4458:2005 BS EN 4458:2005. Aerospace series. Studs, MJ threads, in titanium alloy TI-P64001, MoS2 coated, with serrated locking ring in corrosion resisting steel.Strengt h class: 1100 MPa (at ambient temperature). Technicalspecification
BS EN ISO 16484-6:2005 BS EN ISO 16484-6:2005. Building automation and control systems (BACS). Data communication conformance testing
05/30138957 DC 05/30138957 DC. IEC 61300-2-34. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-34. Tests. Resistance to solvents and contaminating fluids
BS EN 12101-1:2006 BS EN 12101-1:2006. Smoke and heat control systems. Specification for smoke barriers
BIP 2036:2006 BIP 2036:2006. The Risk Management Universe: a guided tour
06/30138864 DC 06/30138864 DC. ISO 18436-8. Condition monitoring and diagnostics of machines. Requirements for training and certification of personnel. Part 8. Thermography
06/30138861 DC 06/30138861 DC. ISO 18436-4. Condition monitoring and diagnostics of machines. Requirements for training and certification of personnel. Part 4. Industrial lubricant analysis
05/30138753 DC 05/30138753 DC. EN 71-1 AMD 1. Safety of toys. Part 1. Mechanical and physical properties
BS ISO 17356-3:2005 BS ISO 17356-3:2005. Road vehicles. Open interface for embedded automotive applications. OSEK/VDX operating system (OS)
PD CLC/TR 50448:2005 PD CLC/TR 50448:2005. Guide to levels of competence required in laser safety
BS ISO 17356-5:2006 BS ISO 17356-5:2006. Road vehicles. Open interface for embedded automotive applications. OSEK/VDX Network Management (NM)
BS ISO 17356-6:2006 BS ISO 17356-6:2006. Road vehicles. Open interface for embedded automotive applications. OSEK/VDX implementation language (OIL)
BS ISO 17356-4:2005 BS ISO 17356-4:2005. Road vehicles. Open interface for embedded automotive applications. OSEK/VDX Communication (COM)
BS ISO 19013-1:2005 BS ISO 19013-1:2005. Rubber hoses and tubing for fuel circuits for internal combustionengines . Specification. Diesel fuels
PD ISO/TR 23602:2005 PD ISO/TR 23602:2005. Toughness of chain steels
WD/ISO/IEC22535 : 2006 EDTN2 WD/ISO/IEC22535 : 2006 EDTN2. ISO/IEC22535 : 2006 Information technology - Telecommunications and information exchange between systems - Corporate Telecommunication Networks - Tunnelling of QSIG over SIP
05/30138594 DC 05/30138594 DC. ISO/IEC 22535. Corporate Telecommunication Networks. Tunnelling of QSIG over SIP
BS 6007:2006 BS 6007:2006. Electric cables. Single core unsheathed heat resisting cables forvoltages up to and including 450/750 V, for internal wiring
ISO/IEC25437 : 2006 EDTN1 ISO/IEC25437 : 2006 EDTN1. ISO/IEC25437 : 2006 Information techonology - Telecommunications and information exchange between systems - WS-Session - Web Services for Application Session Services
05/30138572 DC 05/30138572 DC. IEC 61196-1-300. Coaxial communication cables. Mechanical test methods. Part 1-300. General requirements
PD CLC/TR 50469:2005 PD CLC/TR 50469:2005. Lightning protection systems. Symbols
ISO/IEC11179-2 : 2005 EDTN2 ISO/IEC11179-2 : 2005 EDTN2. ISO/IEC11179-2 : 2005 Information technology -- Metadata registries (MDR). Part 2: Classification
05/30138432 DC 05/30138432 DC. BS EN 1501-1. Refuse collection vehicles. General requirements and safety reqirements. Part 1. Rear loaded refuse collection vehicles
05/30138425 DC 05/30138425 DC. ISO 4254-5. Agricultural machinery. Safety. Part 5. Power-driven soil-working equipment
CWA 15295:2005 CWA 15295:2005. Description of references and data models for classification
CWA 15374:2005 CWA 15374:2005. Security management system for suppliers to the secure printing industry
CWA 15375:2005 CWA 15375:2005. Separators for marine residual fuel. Performance testing using specific test oil.
06/30138405 DC 06/30138405 DC. ISO 8539. Forged steel components for lifting slings. Grade 8
05/30138385 DC 05/30138385 DC. EN 50440. Efficiency of domestic electrical storage water-heaters
BS EN 60335-2-29:2004 BS EN 60335-2-29:2004. Specification for safety of household and similar electrical appliances. Particular requirements. Particular requirements for battery chargers
06/30138366 DC 06/30138366 DC. ISO 9241-20. Ergonomics of human-system interaction. Part 20. Accessibility guidelines for information/communication technology (ICT) equipment and services
05/30138350 DC 05/30138350 DC. EN 15322. Bitumen and bituminous binders. Framework for specifying cutback and fluxed bituminous binders
BS 5261C:2005 (Pack of 100 laminated) BS 5261C:2005 (Pack of 100 laminated).
BS5261C : 2005 (Pack of 50) BS5261C : 2005 (Pack of 50).
BS5261C : 2005 (Pack of 20) BS5261C : 2005 (Pack of 20).
BS5261C : 2005 (Pack of 10) BS5261C : 2005 (Pack of 10).
05/30138231 DC 05/30138231 DC. ISO 8407. Corrosion of metals and alloys. Removal of corrosion products from corrosion test specimens
PAS 75:2005 PAS 75:2005. Specification for the service and provision of printing services
ISO/IECTR24746 : 2005 EDTN 1 ISO/IECTR24746 : 2005 EDTN 1. ISO/IECTR24746 : 2005 Information technology. Generic cabling for customer premises Mid-Span DTE Power insertion.
BS ISO 18164:2005 BS ISO 18164:2005. Passenger car, truck, bus and motorcycle tyres. Methods of measuring rolling resistance
05/30137984 DC 05/30137984 DC. EN 15273-3. Railway applications. Gauges. Part 3. Structure gauges
05/30137981 DC 05/30137981 DC. EN 15273-2. Railway applications. Gauges. Part 2. Rolling stock gauges
05/30137978 DC 05/30137978 DC. EN 15273-1. Railway applications. Gauges. Part 1. Generalities. Common rules for infrastructure and rolling stock
PAS 80:2005 PAS 80:2005. Automotive garage services - Service and repair of vehicles - Technical and customer service - Specification
PAS 81:2005 PAS 81:2005. Specification for the management and operation of swimming pools
BS EN 2002-1:2005 BS EN 2002-1:2005. Aerospace series. Metallic materials. Test methods. Tensile testing at ambient temperature
05/30137949 DC 05/30137949 DC. EN 15269-3. Extended application of test results for fire resistance for doorsets and shutter assemblies. For doors and shutters. Part 3. Timber hinged and pivoted doorsets
05/30137946 DC 05/30137946 DC. EN 15269-1. Extended application of test results for fire resistance for doorsets and shutter assemblies. For doors and windows. Part 1. General requirements for fire resistance
05/30137922 DC 05/30137922 DC. ISO 13865-3. Safety of machinery. Pressure-sensitive protective devices. Part 3. General principles for the design and testing of pressure-sensitive bumpers, plates, wires and similar devices
ISO13602-2 : 2006 EDTN 1 (R08) ISO13602-2 : 2006 EDTN 1 (R08). ISO13602-2 : 2006 Technical energy systems - Methods for analysis. Part 2: Weighting and aggregation and of energywares
05/30137738 DC 05/30137738 DC. ISO 9523. Touring ski-boots for adults. Interface with touring ski-bindings. Requirements and test methods
05/30137732 DC 05/30137732 DC. ISO 11088 AMD 1. Assembly, adjustment and inspection of an alpine ski-binding-boot (S-B-B) system
06/30137711 DC 06/30137711 DC. EN 13618-2. Water supply. Hose assemblies. Part 2. Semi rigid assemblies with or without braiding
06/30137708 DC 06/30137708 DC. EN 13618-1. Water supply. Hose assemblies. Part 1. Flexible hose assemblies with or without braiding
BIP 0081:2005 BIP 0081:2005. ITSMF. Application management pocketbook
BIP 0083:2005 BIP 0083:2005. ITSMF. ICT infrastructure management pocketbook
BIP 3044:2005 BIP 3044:2005. BS 8300 Design of buildings and their approaches to meet the needs of disabled people. Code of practice CD-ROM
BS EN 14453:2005 BS EN 14453:2005. Devices to prevent pollution by backflow of potable water. Pipe interrupter with permanent atmospheric vent DN 10 to DN 20. Family D, type C
PD CEN/TR 15128:2005 PD CEN/TR 15128:2005. Survey of European standards for rehabilitation of drain and sewer systems
BS EN 14870-3:2006 BS EN 14870-3:2006. Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems. Flanges
PD CLC/TR 62102:2006 PD CLC/TR 62102:2006. Electrical safety. Classification of interfaces for equipment to be connected to information and communications technology networks
BS ISO 11357-4:2005 BS ISO 11357-4:2005. Plastics. Differential scanning calorimetry (DSC). Determination of specific heat capacity
BS ISO 22718:2006 BS ISO 22718:2006. Cosmetics. Microbiology. Detection of Staphylococcus aureus
BS ISO 22717:2006 BS ISO 22717:2006. Cosmetics. Microbiology. Detection of Pseudomonas aeruginosa
BS ISO 22715:2006 BS ISO 22715:2006. Cosmetics. Packaging and labelling
BS ISO 21150:2006 BS ISO 21150:2006. Cosmetics. Microbiology. Detection of Escherichia coli
BS ISO 21149:2006 BS ISO 21149:2006. Cosmetics. Microbiology. Enumeration and detection of aerobic mesophilic bacteria
BS ISO 21148:2005 BS ISO 21148:2005. Cosmetics. Microbiology. General instructions for microbiological examimation
BS EN 3475-414:2005 BS EN 3475-414:2005. Aerospace series. Cables, electrical, aircraft use. Test methods. Differential scanning calorimeter (DSC test)
BS ISO 8262-3:2005 BS ISO 8262-3:2005. Milk products and milk-based foods. Determination of fat content by the Weibull-Berntrop gravimetric method (Reference method). Special cases
BS EN ISO 20345:2004 BS EN ISO 20345:2004. Personal protective equipment. Safety footwear
BS EN ISO 7998:2005 BS EN ISO 7998:2005. Ophthalmic optics. Spectacle frames. Lists of equivalent terms and vocabulary
BS EN 2714-013:2005 BS EN 2714-013:2005. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°C. DR family, screened (spiral) and jacketed, UV laser printable. Product standard
BS EN ISO 17249:2004 BS EN ISO 17249:2004. Safety footwear with resistance to chain saw cutting
BS EN 13141-5:2004 BS EN 13141-5:2004. Ventilation for buildings. Performance testing of components/products for residential ventilation. Cowls and roof outlet terminal devices
05/30137514 DC 05/30137514 DC. IEC 60747-14-4. Discrete semiconductor devices. Part 14-4. Semiconductor accelerometers
BS EN 12666-1:2005 BS EN 12666-1:2005. Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE). Specifications for pipes, fittings and the system
BS EN ISO 6134:2005 BS EN ISO 6134:2005. Rubber hoses and hose assemblies for saturated steam. Specification
BS EN 1146:2005 BS EN 1146:2005. Respiratory protective devices. Selfcontained open-circuit compressed air breathing apparatus incorporating a hood for escape. Requirements, testing, marking
ISO/TS9941 : 2005 EDTN2 ISO/TS9941 : 2005 EDTN2. ISO/TS9941 : 2005 Milk and canned evaporated milk - Determination of tin contant - Spectrometric method
BS EN 2607:2005 BS EN 2607:2005. Aerospace series. O-rings for adaptors, threaded, with lockring. Survey
BS ISO 22644:2006 BS ISO 22644:2006. Space data and information transfer systems. Orbit data messages
BS ISO 22672:2006 BS ISO 22672:2006. Space data and information transfer systems. Space link extension (SLE). Forward space packet service
DD CEN/TS 15297:2006 DD CEN/TS 15297:2006. Solid biofuels. Determination of minor elements
DD CEN/TS 15296:2006 DD CEN/TS 15296:2006. Solid biofuels. Calculation of analyses to different bases
DD CEN/TS 15290:2006 DD CEN/TS 15290:2006. Solid biofuels. Determination of major elements
DD CEN/TS 15289:2006 DD CEN/TS 15289:2006. Solid biofuels. Determination of total content of sulphur and chlorine
BS 8408:2005 BS 8408:2005. Road traffic signs. Testing and performance of microprismatic retroreflective sheeting materials. Specification
BS EN 4176:2005 BS EN 4176:2005. Aerospace series. Lockbolts, 100° countersunk normal head or protruding head, tension-/ sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating. Collars in titanium TI-P99002 or aluminium alloy 2024. Metric series. Technical specification
BS EN 4591:2005 BS EN 4591:2005. Aerospace series. Nuts, barrel, self-locking, floating, self-aligning,in heat resisting nickel base alloy, MoS2 lubricated. Classification: 15 50 MPa (at ambient temperature) / 315°C
BS EN 4303:2005 BS EN 4303:2005. Aerospace series. Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness)
BS EN 4304:2005 BS EN 4304:2005. Aerospace series. Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness)
BS EN 4306:2005 BS EN 4306:2005. Aerospace series. Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness)
BS EN 4307:2005 BS EN 4307:2005. Aerospace series. Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness)
BS EN 4497:2005 BS EN 4497:2005. Aerospace series. Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating. Classification: 1 100 MPa (at ambient temperature) / 315 °C
BS EN 4498:2005 BS EN 4498:2005. Aerospace series. Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating. Classification: 1 550 MPa (at ambient temperature) / 315 °C
BS EN 4590:2005 BS EN 4590:2005. Aerospace series. Retainers, spring, sheet metal, for self-locking barrel nuts, in corrosion resisting steel, passivated
BS EN 60127-4:2005+A1:2009 BS EN 60127-4:2005+A1:2009. Miniature fuses. Universal modular fuse-links (UMF). Through-hole and surface mount types
ISO/IECTR15440 : 2005 EDTN1 ISO/IECTR15440 : 2005 EDTN1. ISO/IECTR15440 : 2005 Information technology - Future keyboards and other associated input devices and related entry methods
BS EN 2337:2006 BS EN 2337:2006. Aerospace series. Spherical plain bearings. Technical specification
BS EN 2336:2005 BS EN 2336:2005. Aerospace series. Bearings, spherical plain in steel with assembly slots. Dimensions and loads
BS EN 2328:2006 BS EN 2328:2006. Aerospace series. Washers, tab in corrosion resisting steel, cadmium plated for flight control rods. Dimensions
05/30137050 DC 05/30137050 DC. EN 15313. Railway applications. Wheelsets and bogies. Wheelset maintenance
DD CEN/TS 15279:2006 DD CEN/TS 15279:2006. Workplace exposure. Measurement of dermal exposure. Principles and methods
BS EN 14343:2005 BS EN 14343:2005. Rotary positive displacement pumps. Performance tests for acceptance
BIP 2079:2005 BIP 2079:2005. ISO 22000. Food safety management pack (due for publication November 2005)
BS EN 3745-202:2005 BS EN 3745-202:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Fibre dimensions
BS EN 2853:2005 BS EN 2853:2005. Current ratings for electrical cables with conductor EN 2083
06/30136833 DC 06/30136833 DC. ISO 21100. Air cargo unit load devices. Performance requirements and test parameters
BS EN 2591-609:2005 BS EN 2591-609:2005. Aerospace series. Elements of electrical and optical connection. Test methods. Optical elements. Effectiveness of cable attachment. Cable cyclic flexing
BS EN 2591-212:2005 BS EN 2591-212:2005. Aerospace series. Elements of electrical and optical connection. Test methods. Surface transfer impedance
BS EN 2591-214:2005 BS EN 2591-214:2005. Aerospace series. Elements of electrical and optical connection. Test methods. Lightning strike, current and voltage pulse
BS EN 2591-220:2005 BS EN 2591-220:2005. Aerospace series. Elements of electrical and optical connection. Test methods. Contact/conductor joint ageing by current and temperature cycling
05/30136816 DC 05/30136816 DC. IEC 60191-2/F62 ED 1. Proposed new package outline, power package with 17 pins
05/30136813 DC 05/30136813 DC. IEC 60191-2/F63 ED 1. Proposed new package outline, power package with 34 pins
BS EN 2267-010:2005 BS EN 2267-010:2005. Aerospace series. Cables, electrical for general purpose. Operating temperatures between -55°C and 260°C. DR family, single UV laser printable. Product standard
BS EN 2267-009:2005 BS EN 2267-009:2005. Aerospace series. Cables, electrical for general purpose. Operating temperatures between -55°C and 260°C. DRA family, single and multicore assembly. Product standard
05/30136673 DC 05/30136673 DC. IEC 61000-6-4 ED 2. Electromagnetic compatibility (EMC). Part 6-4. Generic standards. Emission standard for industrial environments
05/30136667 DC 05/30136667 DC. IEC 61000-6-3 ED 2. Electromagnetic compatibility (EMC). Part 6-3. Generic standards. Emission standard for residential, commercial and light-industrial environments
05/30136650 DC 05/30136650 DC. IEC 60127-2 AMD 2. Miniature fuses. Part 2. Cartridge fuse-links
DD IEC/PAS 62267:2005 DD IEC/PAS 62267:2005. Railway applications. Automated urban guided transport (AUGT). Safety requirements
ISO22242 : 2005 EDTN 1 ISO22242 : 2005 EDTN 1. ISO22242 : 2005 Road construction and road maintenance machinery and equipment. Basic types. Identification and description
05/30136556 DC 05/30136556 DC. prEN 14313. Thermal insulation products for building equipment and industrial installation. Factory made polyethylene foam (PEF) products. Specification
05/30136552 DC 05/30136552 DC. prEN 14304. Thermal insulation products for building equipment and industrial installations. Factory made flexible elastomeric foam (FEF). Specification
05/30136550 DC 05/30136550 DC. prEN 14314. Thermal insulation products for building equipment and industrial installations. Factory made phenolic foam (PF) products. Specification
05/30136538 DC 05/30136538 DC. prEN 14307. Thermal insulation products for building equipment and industrial installations. Factory made extruded polystyrene foam (XPS) products. Specification
05/30136516 DC 05/30136516 DC. prEN 14308. Thermal insulation products for building equipment and industrial installations. Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products. Specification
05/30136503 DC 05/30136503 DC. prEN 14309. Thermal insulation products for building equipment and industrial installations. Factory made products of expanded polystyrene (EPS). Specification
05/30136482 DC 05/30136482 DC. EN 12983-3. Cookware. Domestic cookware for use on top of a stove, cooker or hob. Part 3. Cookware for use on induction heating sources
PD ISO/TR 7620:2005 PD ISO/TR 7620:2005. Rubber materials. Chemical resistance
PD CEN/TR 14709:2006 PD CEN/TR 14709:2006. Postal services. Quality of service. Guide for the implementation of EN 13850
DD CEN/TS13381-1:2005 DD CEN/TS13381-1:2005. Test methods for determining the contribution to the fire resistance of structural members. Horizontal protective membranes
BS ISO 16038:2005 BS ISO 16038:2005. Rubber condoms. Guidance on the use of ISO 4074 in the quality management of natural rubber latex condoms
BS EN 12984:2005 BS EN 12984:2005. Food processing machinery. Portable and/or hand-guided machines and appliances with mechanically driven cutting tools. Safety and hygiene requirements
BS ISO 1817:2005 BS ISO 1817:2005. Rubber, vulcanized. Determination of the effect of liquids
05/30136363 DC 05/30136363 DC. IEC 60255-6 ED 3. Electrical relays. Part 6. General requirements for measuring relays and protection equipment
BS EN 581-1:2006 BS EN 581-1:2006. Outdoor furniture. Seating and tables for camping, domestic and contract use. General safety requirements
05/30136348 DC 05/30136348 DC. BS 1339-2. Humidity. Part 2. Humidity calculation and tables
05/30136307 DC 05/30136307 DC. ISO 1496-1 AMD 5. Freight containers. Specification and testing. Part 1. General cargo containers for general purposes
BS ISO 11157:2005 BS ISO 11157:2005. Road vehicles. Brake lining assemblies. Inertia dynamometer test method
CWA 14729-3:2005 CWA 14729-3:2005. The Intrastat system. Message implementation guideline of INSRES/XML
CWA 14729-2:2005 CWA 14729-2:2005. The Intrastat system. Message implementation guideline of INSTAT/XML
CWA 14729-1:2005 CWA 14729-1:2005. The Intrastat system. The implementation model
06/30136266 DC 06/30136266 DC. ISO 21138-3. Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinylchloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Part 3.Pipes with a non-smooth external surface (all materials), type B
06/30136263 DC 06/30136263 DC. ISO 21138-2. Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinylchloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Part 2.Pipes and fittings with smooth external surface. Type A
06/30136260 DC 06/30136260 DC. ISO 21138-1. Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinylchloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Part 1.Material and performance specifications for pipes, fittings and the systems
BS EN 2084:2005 BS EN 2084:2005. Aerospace series. Cables, electric, single-core, general purpose, with conductors in copper or copper alloy. Technical specification
BS ISO 132:2005 BS ISO 132:2005. Rubber, vulcanized or thermoplastic. Determination of flex cracking and crack growth (De Mattia)
DD CEN/TS 15280:2006 DD CEN/TS 15280:2006. Evaluation of a.c. corrosion likelihood of buried pipelines. Application to cathodically protected pipelines
DD CLC/TS 61970-2:2005 DD CLC/TS 61970-2:2005. Energy management system application program interface (EMS-API). Glossary
05/30136183 DC 05/30136183 DC. IEC 60404-8-7. Magnetic materials. Part 8-7. Specification of individual materials. Cold-rolled grain-oriented electrical steel sheet and strip delivered in the fully-processed state
BS EN 10294-1:2005 BS EN 10294-1:2005. Hollow bars for machining. Technical delivery conditions. Non alloy and alloy steels
05/30136149 DC 05/30136149 DC. IEC 62116. Testing procedure of islanding prevention measures for utility interactive photovoltaic inverters
05/30136140 DC 05/30136140 DC. IEC 60095-4 ED 2. Lead-acid starter batteries. Part 4. Dimensions of batteries for heavy vehicles
05/30136105 DC 05/30136105 DC. ISO 15042. Multiple split-system air-conditioners and air-to-air heat pumps. Testing and rating for performance
ISO6597 : 2005 EDTN4 ISO6597 : 2005 EDTN4. ISO6597 : 2005 Road vehicles - Hydraulic braking systems, including those with electronic control functions, for motor vehicles - Test procedures
05/30136084 DC 05/30136084 DC. ISO 12575-3. Thermal insulation. Exterior insulating systems for foundations. Part 3. Test methods
05/30136071 DC 05/30136071 DC. ISO 13253. Ducted air-conditioners and air-to-air heat pumps. Testing and rating for performance
PD IEC/TR 62240:2005 PD IEC/TR 62240:2005. Process management for avionics. Use of semiconductor devices outside manufacturers' specified temperature range
BS ISO 14827-2:2005 BS ISO 14827-2:2005. Transport information and control systems. Data interfaces between centres for transport information and control systems. DATEX-ASN
PD CEN/TR 14819-2:2005 PD CEN/TR 14819-2:2005. Safety recommendations for cableway installations designed to carry persons. Prevention and fight against fire. Other funicular railways and other installations
BS EN ISO 8340:2005 BS EN ISO 8340:2005. Building construction. Sealants. Determination of tensile properties at maintained extension
BS EN ISO 8339:2005 BS EN ISO 8339:2005. Building construction. Sealants. Determination of tensile properties (extension to break)
BS ISO 14827-1:2005 BS ISO 14827-1:2005. Transport information and control systems. Data interfaces between centres for transport information and control systems. Message definition requirements
ISO/IECTR15938-11 : 2005 EDTN1 ISO/IECTR15938-11 : 2005 EDTN1. ISO/IECTR15938-11 : 2005 Information technology - Multimedia content description interface - Part 11: MPEG-7 profile schemas
BS EN 4616:2005 BS EN 4616:2005. Aerospace series. Magnesium alloy MG-C18002. T4. Chill casting
DD ISO/PAS 22241-2:2005 DD ISO/PAS 22241-2:2005. Diesel engines. NOx reduction agent AUS 32. Test methods
BS EN 4615:2005 BS EN 4615:2005. Aerospace series. Magnesium alloy MG-C18002. T4. Sand casting
BIP 3041:2005 BIP 3041:2005. Recommended DDA hardware for BIP 3040
DD ISO/PAS 22241-1:2005 DD ISO/PAS 22241-1:2005. Diesel engines. NOx reduction agent AUS 32. Quality requirements
BIP 2100:2005 BIP 2100:2005. ISO 9001:2000 for small businesses. 3rd edition
BIP 2099:2005 BIP 2099:2005. ISO 9001:2000 in brief. 2nd edition
BS EN ISO 5943:2006 (EDTN 1) BS EN ISO 5943:2006 (EDTN 1). Cheese and processed cheese products. Determination of chloride content. Potentiometric titration method
BS ISO 8156:2005 BS ISO 8156:2005. Dried milk and dried milk products. Determination of insolubility index
PD CEN/TR 15253:2005 PD CEN/TR 15253:2005. Health informatics. Quality of service requirements for health information interchange
BS ISO 15113:2005 BS ISO 15113:2005. Rubber. Determination of frictional properties
05/30135559 DC 05/30135559 DC. EN 50471. Electromagnetic compatibility (EMC). Product family emission standard for wire-line telecommunication networks
ISO93-2 : 2006 EDTN3 ISO93-2 : 2006 EDTN3. ISO 93-2 Textile machinery and accessories - Cylindrical sliver cans. Part 2: Spring bottoms
ISO93-1 : 2006 EDTN4 ISO93-1 : 2006 EDTN4. ISO93-1 : 2006 Textile machinery and accessories - Cylindrical sliver cans. Part 1: Main dimensions
BIP 2088:2005 BIP 2088:2005. Escalators and moving walks. Code of practice for safe working on escalators and moving walks
BS EN 521:2006 BS EN 521:2006. Specifications for dedicated liquefied petroleum gas appliances. Portable vapour pressure liquefied petroleum gas appliances
05/30135474 DC 05/30135474 DC. BS 600. A guide to the application of statistical methods to quality and standardization
06/30135440 DC 06/30135440 DC. ISO 21072-1. Ships and marine technology. Marine environment protection. Performance testing of oil skimmers. Part 1. Moving water condition
05/30135332 DC 05/30135332 DC. BS 6102-3 AMD 4. Cycles. Part 3. Specification for photometric and physical requirements of lighting equipment
BS EN ISO 6270-2:2005, BS 3900-F21:2005 BS EN ISO 6270-2:2005, BS 3900-F21:2005. Paints and varnishes. Determination of resistance to humidity. Procedure for exposing test specimens in condensation-water atmospheres
BIP 0018:2005 BIP 0018:2005. Simplifying the implementation of MPEG CD-ROM
WD/ISO/IEC17344 : 2005 EDTN2 WD/ISO/IEC17344 : 2005 EDTN2. ISO/IEC17344 : 2005 Information technology -- Data interchange on 120 mm and 80 mm using +R format -- Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed up to 4X)
05/30135285 DC 05/30135285 DC. HD 22.3 S4/prAA. Cables of rated voltages up to and including 450/750 V and having cross-linked insulation. Part 3. Heat resistant silicone rubber insulated cables
KIT 176 KIT 176. BS EN 13001. Crane safety design kit
BS EN 14529:2005 BS EN 14529:2005. Respiratory protective devices. Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only
05/30135225 DC 05/30135225 DC. IEC 60749-9 ED 2. Semiconductor devices. Discrete devices. Part 9. Insulated-gate bipolar transistors (IGBTs)
BS EN 2714-002:2005 BS EN 2714-002:2005. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°C. Screened and jacketed. General
BS EN 3475-705:2005 BS EN 3475-705:2005. Aerospace series. Cable, electrical, aircraft use. Test methods. Contrast measurement
BS EN 3475-407:2005 BS EN 3475-407:2005. Aerospace series. Cable, electrical, aircraft use. Test methods. Flammability
05/30135208 DC 05/30135208 DC. ISO 20712-1. Water safety signs and beach safety flags. Part 1. Specifications for water safety signs used in workplaces and public areas
BS EN 3475-706:2005 BS EN 3475-706:2005. Aerospace series. Cables, electrical, aircraft use. Test methods. Laser markability
BS EN 1034-5:2005 BS EN 1034-5:2005. Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Sheeters
AD2000M S3/2 : 2004 AD2000M S3/2 : 2004.
AD2000M N1 : 2004 AD2000M N1 : 2004. Pressure vessels in glass fibre reinforced thermosetting plastics
AD2000M W9 : 2004 AD2000M W9 : 2004. ADM W9 : 2004 Steel flanges
AD2000M W13 : 2004 AD2000M W13 : 2004.
PD ISO/TR 16142:2006 PD ISO/TR 16142:2006. Medical devices. Guidance on the selection of standards in support of recognized essential principles of safety and performance of medical devices
AD2000M G1 : 2004 AD2000M G1 : 2004. ADM G1 : 2004 Structure, Application and Method Guidelines
BS EN 3475-411:2005 BS EN 3475-411:2005. Aerospace series. Cables, electrical, aircraft use. Test methods. Resistance to fluids
BS EN 2714-003:2005 BS EN 2714-003:2005. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°C. Screened (spiral) and jacketed, ink jet printable. Product standard
BS ISO 15928-2:2005 BS ISO 15928-2:2005. Houses. Description of performance. Structural serviceability
BS ISO 3899:2005 BS ISO 3899:2005. Rubber. Nitrile latex. Determination of residual acrylonitrile content
BS EN 13321-1:2006 BS EN 13321-1:2006. Open data communication in building automation, controls and building management. Home and building electronic system. Product and system requirements
FDIS 27001:2005, BS 7799-2:2005 (Draft) FDIS 27001:2005, BS 7799-2:2005 (Draft). Draft BS 7799-2:2005 (ISO/IEC FDIS 27001:2005). Information technology. Security techniques. Information security management systems. Requirements (See Item Summary for details of Special Offer)
DD ISO/TS 16553:2006 DD ISO/TS 16553:2006. Road vehicles. Data cables. Test methods and requirements
05/30135076 DC 05/30135076 DC. IEC 60730-1 A5 ED 4. Automatic eletrical controls for household and similar use. Part 1. General requirements. Amendment to incorporate EMC levels from the IEC 60335 series of standards
05/30135066 DC 05/30135066 DC. IEC 60730-1 AMD 4. ED 4. Automatic electrical controls for household and similar use. Part 1. General requirements. Amendment to to incorporates EMC levels from IEC 60335-1 A1 ED 4
05/30135062 DC 05/30135062 DC. IEC 60730-1 AMD 3. ED 4. Automatic electrical controls for household and similar use. Part 1. General requirements. Amendment to update clauses 9, 10, and 20
05/30135055 DC 05/30135055 DC. IEC 60730-1 AMD 2. ED 4. Automatic electrical controls for household and similar use. Part 1. General requirements. Amendment to update Annex N
05/30135042 DC 05/30135042 DC. ISO/DIS 17512-1. Soil quality. Avoidance test for testing the quality of soils and effects of chemicals on behaviour. Part 1. Test with earthworms (Eisenia fetida and Eisenia andrei)
ISO23551-4 : 2005 EDTN 1 ISO23551-4 : 2005 EDTN 1. ISO23551-4 : 2005 Safety and control devices for gas burners and gas-burning appiances. Particular requirements. Part 4: Valve-proving systems for automatic shut-off valves
PD CEN/TR 15118:2005 PD CEN/TR 15118:2005. Testing guidelines for touch and close fasteners
DD CLC/TS 61643-22:2006 DD CLC/TS 61643-22:2006. Low-voltage surge protective devices. Surge protective devices connected to telecommunications and signalling networks. Selection and application principles
BS ISO 289-1:2005 BS ISO 289-1:2005. Rubber, unvulcanized. Determinations using a shearing-disc viscometer. Determination of Mooney viscosity
05/30134891 DC 05/30134891 DC. EN 15254-2. Extended application of results from fire resistance tests. Non-loadbearing walls. Part 2. Masonry and gypsum blocks
BS ISO 9349:2004 BS ISO 9349:2004. Preinsulated ductile iron pipeline systems
BS EN 12336:2005 BS EN 12336:2005. Tunnelling machines. Shield machines, thrust boring machines, auger boring machines, lining erection equipment. Safety requirements
05/30134824 DC 05/30134824 DC. EN 50447. Active implantable medical devices. Particular requirements for Heart-Lung Machines (HLM)
05/30134817 DC 05/30134817 DC. IEC 62434 TR. The pH measurements in difficult media. Definitions, standards and procedures
05/30134815 DC 05/30134815 DC. IEC 62432 TR. The rH index in aqueous and aqueous-organic media
05/30134748 DC 05/30134748 DC. ISO 14521. Gears. Calculation of load capacity of wormgears
06/30134713 DC 06/30134713 DC. ISO 14855-2. Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions. Method by analysis of evolved carbon dioxide. Part 2. Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
BS ISO 13232-1:2005 BS ISO 13232-1:2005. Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles. Definitions, symbols and general considerations
BS ISO 13232-2:2005 BS ISO 13232-2:2005. Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles. Definition of impact conditions in relation to accident data
BS ISO 13232-3:2005 BS ISO 13232-3:2005. Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles. Motorcyclist anthropometric impact dummy
BS ISO 13232-4:2005 BS ISO 13232-4:2005. Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles. Variables to be measured, instrumentation and measurement procedures
BS ISO 13232-5:2005 BS ISO 13232-5:2005. Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles. Injury indices and risk/benefit analysis
BS ISO 13232-6:2005 BS ISO 13232-6:2005. Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles. Full-scale impact-test procedures
BS ISO 13232-7:2005 BS ISO 13232-7:2005. Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles. Standardized procedures for performing computer simulations of motorcycle impact tests
BS ISO 13232-8:2005 BS ISO 13232-8:2005. Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles. Documentation and reports
BIP 2073:2005 BIP 2073:2005. Quality patient care in hospitals
BIP 2072:2005 BIP 2072:2005. Quality of care in residential homes for the elderly
BIP 2071:2005 BIP 2071:2005. Medical devices: ISO 13485 and ISO 9001
06/30134641 DC 06/30134641 DC. ISO 19252. Plastics. Determination of scratch properties
06/30134637 DC 06/30134637 DC. ISO 22007-3. Plastics. Determination of thermal conductivity and diffusivity. Part 3. Temperature wave analysis method
DD IEC/PAS 62431:2005 DD IEC/PAS 62431:2005. Measurement methods for reflectivity of electromagnetic wave absorbers in millimetre wave frequency
05/30134607 DC 05/30134607 DC. ISO 22110. Milk and milk products. Sampling. Inspection by variables in the presence of measurement error
BS ISO 8262-2:2005 BS ISO 8262-2:2005. Milk products and milk-based foods. Determination of fat content by the Weibull-Berntrop gravimetric method (reference method). Edible ices and ice-mixes
BS ISO 8262-1:2005 BS ISO 8262-1:2005. Milk products and milk-based foods. Determination of fat content by the Weibull-Berntrop gravimetric method (reference method). Infant foods
PD ISO/TR 15155:2005 PD ISO/TR 15155:2005. Test facilities for agricultural irrigation equipment
BS ISO 6730:2005 BS ISO 6730:2005. Milk. Enumeration of colony-forming units of psychrotrophic microorganisms. Colony-count technique at 6,5°C
05/30134586 DC 05/30134586 DC. IEC 60050-426. International Electrotechnical Vocabulary. Chapter 426. Electrical apparatus for explosive atmospheres
05/30134544 DC 05/30134544 DC. EN 23698. Chemical analysis of nitride bonded silicon carbide refractories
BS ISO 23273-1:2006 BS ISO 23273-1:2006. Fuel cell road vehicles. Safety specifications. Vehicle functional safety
BS EN 62317-7:2005 BS EN 62317-7:2005. Ferrite cores. Dimensions. EER-cores
CWA 15292:2005 CWA 15292:2005. Standard form contract to assist compliance with obligations imposed by article 17 of the Data Protection Directive 95/46/EC (and implementation guide)
CWA 15294:2005 CWA 15294:2005. Dictionary of terminology for product classification and description
CWA 15293:2005 CWA 15293:2005. Automotive fuels. Ethanol E85. Requirements and test methods
BS EN 12951:2004 BS EN 12951:2004. Prefabricated accessories for roofing. Permanently fixed roof ladders. Product specification and test methods
DD CEN/TS 15210-2:2005 DD CEN/TS 15210-2:2005. Solid biofuels. Method for the determination of mechanical durability of pellets and briquettes. Briquettes
DD CEN/TS 15210-1:2005 DD CEN/TS 15210-1:2005. Solid biofuels. Method for the determination of mechanical durability of pellets and briquettes. Pellets
BS ISO 15837:2004 BS ISO 15837:2004. Ships and marine technology. Gasketed mechanical couplings for use in piping systems. Performance specification
BS ISO 3384:2005 BS ISO 3384:2005. Rubber, vulcanized or thermoplastic. Determination of stress relaxationi n compression at ambient and at elevated temperatures
05/30134362 DC 05/30134362 DC. EN 15101-2. Thermal insulation products for buildings. In-situ formed loose-fill cellulose products. Part 2. Specification for the installed products
05/30134359 DC 05/30134359 DC. EN 15101-1. Thermal insulation products for buildings. In-situ formed loose-fill cellulose products. Part 1. Specification for the products before installation
05/30134315 DC 05/30134315 DC. ISO 22967. Automatic forced draught burners for gaseous fuels
05/30134294 DC 05/30134294 DC. BS 8445. Bath and shower mats. Specification
BS EN 516:2006 BS EN 516:2006. Prefabricated accessories for roofing. Installations for roof access. Walkways, treads and steps
BS 8766:2004 BS 8766:2004. Names and identifiers of individuals and groups. Data structure for interoperability. Specification
BS EN 60228:2005 BS EN 60228:2005. Conductors of insulated cables
BS EN 13367:2005 BS EN 13367:2005. Ceramic machines. Safety. Transfer platforms and cars
BS ISO 8705:2005 BS ISO 8705:2005. Mopeds. Measurement methods for location of centre of gravity
05/30134101 DC 05/30134101 DC. EN 15228. Structural timber. Structural timber preservative treated against biological attack
BS EN 1034-4:2005 BS EN 1034-4:2005. Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Pulpers and their loading facilities
KIT 175 KIT 175. Lifts and escalators safety kit
BS ISO 17356-2:2005 BS ISO 17356-2:2005. Road vehicles. Open interface for embedded automotive applications. OSEK/VDX specifications for binding OS, COM and NM
05/30134015 DC 05/30134015 DC. EN 15254-5. Extended application of results from fire resistance tests. Non-loadbearing walls. Part 5. Metal sandwich panel construction
05/30134009 DC 05/30134009 DC. EN 15254-1. Extended application of results from fire resistance tests. Non-loadbearing walls. Part 1. General
PD 970:2005 PD 970:2005. Wrought steels for mechanical and allied engineering purposes. Requirements for carbon, carbon manganese and alloy hot worked or cold finished steels
BS 8459:2005 BS 8459:2005. Determination of extractable matter in textiles. Method
PD CEN/TR 15230:2005 PD CEN/TR 15230:2005. Workplace atmospheres. Guidance for sampling of inhalable, thoracic and respirable aerosol fractions
BIP 2095:2005 BIP 2095:2005. Setting the tone. Ethical business leadership
BIP 2092:2005 BIP 2092:2005. Corporate use of codes of ethics: 2004 survey
BIP 2091:2005 BIP 2091:2005. Risky business. Towards best practice in managing reputation risk
BS ISO 23539:2005 BS ISO 23539:2005. Photometry. The CIE system of physical photometry
BIP 2090:2005 BIP 2090:2005. Understanding and managing risk attitude
BIP 2087:2005 BIP 2087:2005. SMMT kit. Guides for business improvement
BS 8621:2004 BS 8621:2004. Thief resistant lock assembly. Keyless egress
BS 3621:2004 BS 3621:2004. Thief resistant lock assembly. Key egress
06/30133753 DC 06/30133753 DC. ISO 24473. Fire tests. Open calorimetry. Measurement of the rate of production of heat and combustion products for fires of up to 20MW
BS 9990:2006 BS 9990:2006. Code of practice for non-automatic fire-fighting systems in buildings
BS EN 237:2004, BS 2000-428:2004 BS EN 237:2004, BS 2000-428:2004. Methods of test for petroleum and its products. BS 2000-428: Liquid petroleum products. Petrol. Determination of low lead concentrations by atomic absorption spectrometry
BS EN 62137:2004 BS EN 62137:2004. Environmental and endurance testing. Test methods for surface-mount boards of area array type packages FBGA, BGA, FLGA, LGA, SON and QFN
BS ISO 22663:2006 BS ISO 22663:2006. Space data and information transfer systems. Proximity-1 space link protocol. Data link layer
BS ISO 21848:2005 BS ISO 21848:2005. Road vehicles. Electrical and electronic equipment for a supply voltage of 42 V. Electrical loads
BS 7593:2006 BS 7593:2006. Code of practice for treatment of water in domestic hot water central heating systems
ISO10426-1 : 2005 EDTN2 ISO10426-1 : 2005 EDTN2. ISO10426-1 : 2005 Petroleum and natural gas industries - Cements and materials for well cementing. Part 1: Specification
05/30133483 DC 05/30133483 DC. ISO 18213-6. Nuclear fuel technology. Tank calibration and volume determination for nuclear materials accountancy. Part 6. Accurate in-tank determination of liquid density in accountancy vessels equipped with dip tubes
05/30133480 DC 05/30133480 DC. ISO 18213-5. Nuclear fuel technology. Tank calibration and volume determination for nuclear materials accountancy. Part 5. Accurate determination using a rapid bubbling rate of liquid height in accountancy tanks equipped with dip tubes
05/30133477 DC 05/30133477 DC. ISO 18213-4. Nuclear fuel technology. Tank calibration and volume determination for nuclear materials accountancy. Part 4. Accurate determination using a slow bubbling rate of liquid height in accountancy tanks equipped with dip tubes
DD CEN/TS 15291:2006 DD CEN/TS 15291:2006. Identification card system. Guidance on design for accessible card-activated devices
BS EN 50310:2006 BS EN 50310:2006. Application of equipotential bonding and earthing in buildings with information technology equipment
BS EN 1034-14:2005 BS EN 1034-14:2005. Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Reel splitter
BS EN 1034-13:2005 BS EN 1034-13:2005. Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Machines for de-wiring bales and units
BS EN 1034-6:2005 BS EN 1034-6:2005. Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Calender
05/30133366 DC 05/30133366 DC. EN 5XXXX BTTF 116-1. Standard for the inventory, control, management, decontamination and/or disposal of electrical equipment and insulating liquids containing PCBs
BIP 0074:2006 BIP 0074:2006. Measuring the effectiveness of your ISMS implementations based on ISO/IEC 27001
DD 9999:2005 DD 9999:2005. Code of practice for fire safety in the design, construction and use of buildings
BS EN 12629-6:2004 BS EN 12629-6:2004. Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Stationary and mobile equipment for the manufacture of precast reinforced products
06/30133245 DC 06/30133245 DC. EN 1501-5. Refuse collection vehicles and their associated lifting devices. General requirements and safety requirements. Part 5. Lifting devices for refuse collection vehicles
BS EN 13591:2005 BS EN 13591:2005. Food processing machinery. Fixed deck oven loaders. Safety and hygiene requirements
BS EN 13288:2005 BS EN 13288:2005. Food processing machinery. Bowl lifting and tilting machines. Safety and hygiene requirements.
BS EN 13389:2005 BS EN 13389:2005. Food processing machinery. Mixers with horizontal shafts. Safety and hygiene requirements
BS EN 12851:2005 BS EN 12851:2005. Food processing machinery. Catering attachments for machines having an auxiliary drive hub. Safety and hygiene requirements
DD CLC/TS 50459-6:2005 DD CLC/TS 50459-6:2005. Railway applications. Communication, signalling and processing systems. European rail traffic management system. Driver-machine interface. Audible information
DD CLC/TS 50459-5:2005 DD CLC/TS 50459-5:2005. Railway applications. Communication, signalling and processing systems. European rail traffic management system. Driver-machine interface. Symbols
DD CLC/TS 50459-4:2005 DD CLC/TS 50459-4:2005. Railway applications. Communication, signalling and processing systems. European rail traffic management system. Driver-machine interface. Data entry for the ERTMS/ETCS/GSM-R systems
DD CLC/TS 50459-2:2005 DD CLC/TS 50459-2:2005. Railway applications. Communication, signalling and processing systems. European rail traffic management system. Driver-machine interface. Ergonomic arrangements of ERTMS/ETCS information
DD CLC/TS 50459-1:2005 DD CLC/TS 50459-1:2005. Railway applications. Communication, signalling and processing systems. European rail traffic management system. Driver-machine interface. Ergonomic principles for the presentation of ERTMS/ETCS/GSM-R information
BS ISO 9926-3:2005 BS ISO 9926-3:2005. Cranes. Training of drivers. Tower cranes
BS ISO 1940-1:2003 BS ISO 1940-1:2003. Mechanical vibration. Balance quality requirements for rotors in a constant (rigid) state. Specification and verification of balance tolerances
DD IEC/PAS 61996-2:2005 DD IEC/PAS 61996-2:2005. Maritime navigation and radiocommunication equipment and systems. Shipborne voyage data recorder (VDR). Simplified voyage data recorder (S-VDR). Performance requirements. Methods of testing and required test results
BS EN 1744-4:2005 BS EN 1744-4:2005. Tests for chemical properties of aggregates. Determination of water susceptibility of fillers for bituminous mixtures
BIP 0073:2005 BIP 0073:2005. Guide to the implementation and auditing of ISMS controls based on ISO/IEC 27001
BIP 0072:2005 BIP 0072:2005. Are you ready for a BS ISO/IEC 27001 ISMS audit?
BIP 0071:2005 BIP 0071:2005. Guidelines on Requirements and Preparations for ISMS Certification based on ISO/IEC 27001
KIT 174 KIT 174. Gas fire appliances kit (BS 5871)
BIP 3035:2005 BIP 3035:2005. OH&S management systems. A practical approach - Video & CD
BIP 3033:2005 BIP 3033:2005. How to lead OH&S risk management - Video and CD
BIP 3029:2005 BIP 3029:2005. Connor. The ISO 9001:2000 road movie. Leadership skills for customer satisfaction - Video and CD
05/30133005 DC 05/30133005 DC. ISO 21847-3. Nuclear fuel technology. Alpha spectrometry. Part 3. Determination of uranium 232 in uranium and its compounds
BIP 3031:2005 BIP 3031:2005. The ISO 14000 challenge. Environmental management - Video and CD
BIP 3027:2005 BIP 3027:2005. Gorilla in the midst. Auditing to add value - Video & CD
BIP 3039:2005 BIP 3039:2005. Introducing the tools for continuous improvement - Video & CD
BIP 3026:2005 BIP 3026:2005. Introducing the tools for continuous improvement - DVD & CD
BIP 3028:2005 BIP 3028:2005. Gorilla in the midst. Auditing to add value - DVD & CD
BIP 3030:2005 BIP 3030:2005. Connor. The ISO 9001:2000 road movie. Leadership skills for customer satisfaction - DVD and CD
BIP 3032:2005 BIP 3032:2005. The ISO 14000 challenge. Environmental management - DVD and CD
BIP 3034:2005 BIP 3034:2005. How to lead OH&S risk management - DVD and CD
BIP 3036:2005 BIP 3036:2005. OH&S management systems. A practical approach - DVD & CD
PD CEN/TR 15160:2005 PD CEN/TR 15160:2005. Petroleum and related products. Applicability of diesel fuel test methods for fatty acid methyl esters (FAME). Information and results on round robin tests
CWA 15249:2005 CWA 15249:2005. Guidance information for naming, versioning, evolution and maintenance of element declarations and application profiles
CWA 15248:2005 CWA 15248:2005. Guidelines for machine-processable representation of Dublin Core application profiles
CWA 15247:2005 CWA 15247:2005. Guidance information for the deployment of Dublin Core metadata in corporate environments
CWA 15246:2005 CWA 15246:2005. Guidance for the deployment of the EU e-government metadata framework
CWA 15245:2005 CWA 15245:2005. EU e-government metadata framework
CWA 15244:2005 CWA 15244:2005. Guidance information for the deployment of Dublin Core metadata
CWA 15263:2005 CWA 15263:2005. Analysis of privacy protection technologies, privacy-enhancing technologies (PET), privacy management systems (PMS) and identity management systems (IMS), the drivers thereof and the need for standardization
CWA 15262:2005 CWA 15262:2005. Inventory of data protection auditing practices
CWA 15264-3:2005 CWA 15264-3:2005. User requirements for a European interoperable eID system within a smart card infrastructure
CWA 15264-2:2005 CWA 15264-2:2005. Best practice manual for card scheme operators exploiting a multi-application card scheme incorporating interoperable IAS services
CWA 15264-1:2005 CWA 15264-1:2005. Architecture for a European interoperable eID system within a smart card infrastructure
BS ISO 22090-3:2004 BS ISO 22090-3:2004. Ships and marine technology. Transmitting heading devices (THDs). GNSS principles
BS ISO/IEC 24723:2006 BS ISO/IEC 24723:2006. Information technology. Automatic identification and data capture techniques. EAN.UCC composite bar code symbology specification
05/30132762 DC 05/30132762 DC. prEN 15229. Plastics piping systems. Piping systems for non-pressure underground drainage and sewerage. Performance requirements for thermoplastics manholes and inspection chambers
ISO5355 : 2005 EDTN4 ISO5355 : 2005 EDTN4. ISO5355 : 2005 Alpine ski-boots - Requirements and test methods
05/30132752 DC 05/30132752 DC. ISO 15968. Direct reduced iron. Determination of apparent density and water absorption of hot briquetted iron (HBI)
05/30132701 DC 05/30132701 DC. IEC 62271-300 ED 1. High-voltage switchgear and controlgear. Part 300. Seismic qualification of alternating current circuit-breakers
05/30132689 DC 05/30132689 DC. IEC 60350 AMD 2. Electric cooking ranges, hobs, ovens and grills for household use. Methods for measuring performance
BS EN 60068-2-58:2004 BS EN 60068-2-58:2004. Environmental testing. Tests. Test Td. Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
BS ISO 20957-1:2005 BS ISO 20957-1:2005. Stationary training equipment. General safety requirements and test methods
BS ISO 20957-2:2005 BS ISO 20957-2:2005. Stationary training equipment. Strength training equipment. Additional specific safety requirements and test methods
BS 2000-284:2004, IP 284:2004 BS 2000-284:2004, IP 284:2004. Methods of test for petroleum and its products. Determination of unsaponifiable and saponifiable matter in oils, fats and waxes
BS 2000-182:2005, IP 182:2005 BS 2000-182:2005, IP 182:2005. Methods of test for petroleum and its products. Determination of inorganic acidity of petroleum products. Colour indicator titration method
BS 2000-168:2003, IP 168:2003 BS 2000-168:2003, IP 168:2003. Methods of test for petroleum and its products. Determination of rolling bearing performance of lubricating grease
BS 2000-156:2005, IP 156:2005 BS 2000-156:2005, IP 156:2005. Methods of test for petroleum and its products. Determination of hydrocarbon types in petroleum products. Fluorescent indicator adsorption method
CWA 15261-3:2005 CWA 15261-3:2005. Measurement uncertainties in mechanical tests on metallic materials. The evaluation of uncertainties in creep testing
BS 2000-143:2004, IP 143:2004 BS 2000-143:2004, IP 143:2004. Methods of test for petroleum and its products. Determination of asphaltenes (heptane insolubles)in crude petroleum and petroleum products
CWA 15261-2:2005 CWA 15261-2:2005. Measurement uncertainties in mechanical tests on metallic materials. The evaluation of uncertainties in tensile testing
CWA 15261-1:2005 CWA 15261-1:2005. Measurement uncertainties in mechanical tests on metallic materials. The evaluation of uncertainties in low-cycle fatigue testing
BS 2000-138:2002, IP 138:2002 BS 2000-138:2002, IP 138:2002. Methods of test for petroleum and its products. Determination of oxidation stability of aviation fuel. Potential residue method
BS EN 61058-2-4:2005 BS EN 61058-2-4:2005. Switches for appliances. Particular requirements for independently mounted switches
BS 2000-129:2003, IP 19:2003 BS 2000-129:2003, IP 19:2003. Methods of test for petroleum and its products. Determination of bromine number. Colour indicator titration method
BS EN 60335-2-31:2003 BS EN 60335-2-31:2003. Household and similar electrical appliances. Safety. Particular requirements for range hoods
BS 2000-19:2003, IP 19:2003 BS 2000-19:2003, IP 19:2003. Methods of test for petroleum and its products. Determination of demulsibility characteristics of lubricating oil
05/30132567 DC 05/30132567 DC. IEC 60335-2-103 AMD 1. Household and similar electrical appliances. Safety. Part 2-103. Particular requirements for drives for gates, doors and windows
BS 2000-121:2005, IP 121:2005 BS 2000-121:2005, IP 121:2005. Methods of test for petroleum and its products. Determination of oil separation from lubricating grease. Pressure filtration method
BS 2000-112:2005, IP 112:2005 BS 2000-112:2005, IP 112:2005. Methods of test for petroleum and its products. Determination of corrosiveness to copper of lubricating grease. Copper strip method
PD CEN/TR 15225:2005 PD CEN/TR 15225:2005. Guidance on factory production control for the CE marking (attestationof conformity 2+) of designed masonry mortars
PD CEN/TR 15235:2005 PD CEN/TR 15235:2005. Welding. Methods for assessing imperfections in metallic structures
BS EN ISO 10426-5:2005 BS EN ISO 10426-5:2005. Petroleum and natural gas industries. Cements and materials for well cementing. Determination of shrinkage and expansion of well cement formulations at atmospheric pressure
BS EN ISO 7686:2005 BS EN ISO 7686:2005. Plastics pipes and fittings. Determination of opacity
05/30132503 DC 05/30132503 DC. BS ISO 16653-2. Mobile elevating work platforms. Design, calculations, safety requirements and test methods relative to special features. Part 2. MEWPs with non-conductive (insulating) components
05/30132502 DC 05/30132502 DC. ISO 4468. Gear hobs. Accuracy requirements
BIP 0008-3:2005 BIP 0008-3:2005. Code of practice for legal admissibility and evidential weight of linking electronic identity to documents
BIP 0008-2:2005 BIP 0008-2:2005. Code of practice for legal admissibility and evidential weight of information communicated electronically
BIP 3025:2005 BIP 3025:2005. Policybase CD-ROM
BIP 2082:2005 BIP 2082:2005. Electrician's Guide to the Building Regulations. Including approved Document P: Electrical Safety in Dwellings
PD IEC/TR 62154:2005 PD IEC/TR 62154:2005. Terminology in the area of Information structures, documentation and graphical symbols
BS EN 14654-1:2005 BS EN 14654-1:2005. Management and control of cleaning operations in drains and sewers. Sewer cleaning
ISO8713 : 2005 EDTN2 ISO8713 : 2005 EDTN2. ISO 8713 : 2005 Electric road vehicles - Vocabulary
06/30132356 DC 06/30132356 DC. ISO 22007-4. Plastics. Determination of thermal conductivity and thermal diffusivity. Part 4. Laser flash method
BS ISO 16564:2004 BS ISO 16564:2004. Rubber, raw natural. Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
BS EN 60534-1:2005 BS EN 60534-1:2005. Industrial-process control valves. Control valve terminology and general considerations
BS EN ISO 10993-18:2005 BS EN ISO 10993-18:2005. Biological evaluation of medical devices. Chemical characterization of materials
BS ISO 8820-2:2005 BS ISO 8820-2:2005. Road vehicles. Fuse-links. User's guide
BS ISO 11452-4:2005 BS ISO 11452-4:2005. Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy. Bulk current injection (BCI)
05/30132291 DC 05/30132291 DC. IEC 60061-1. Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1. Lamp caps Amd. 37. Part 2. Lampholders - Amendment 34. Part 3. Gauges -Amendment 36. Part 4. Guidelines and general information A.10
ISO6594 : 2006 EDTN 2 ISO6594 : 2006 EDTN 2. ISO6594 : 2006 Cast iron drainage pipes and fittings - Spigot series
PD EN 14035-31:2005 PD EN 14035-31:2005. Fireworks. Shell-in-mortars. Specification and test methods
BS ISO 16020:2005 BS ISO 16020:2005. Steel for the reinforcement and prestressing of concrete. Vocabulary
05/30132212 DC 05/30132212 DC. EN 15203. Energy performance of buildings. Assessment of energy use and definition of ratings
BS ISO 14963:2003 BS ISO 14963:2003. Mechanical vibration and shock. Guidelines for dynamic tests and investigations on bridges and viaducts
BS ISO 13379:2003 BS ISO 13379:2003. Condition monitoring and diagnostics of machines. General guidelines on data interpretation and diagnostics techniques
BS EN 61019-2:2005 BS EN 61019-2:2005. Surface acoustic wave (SAW) resonators. Guide to the use
PD IEC/TR 61967-4-1:2005 PD IEC/TR 61967-4-1:2005. Integrated circuits. Measurement of electromagnetic emissions, 150 kHz to 1 GHz. Measurement of conducted emissions. 1 Ohm/150 Ohm direct coupling method. Application guidance to IEC 61967-4
ISO16240 : 2005 EDTN1 ISO16240 : 2005 EDTN1.
BS EN 1034-22:2005 BS EN 1034-22:2005. Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Woodgrinders
BS EN 1034-7:2005 BS EN 1034-7:2005. Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Chests
BS EN 13570:2005 BS EN 13570:2005. Food processing machinery. Mixers and mixing machines. Safety and hygiene requirements
BS EN 60870-6-501:1996 BS EN 60870-6-501:1996. Telecontrol equipment and systems. Telecontrol protocols compatible with ISO standards and ITU-T recommendations. TASE.1 service definitions
BS ISO 366-4:2005 BS ISO 366-4:2005. Textile machinery and accessories. Reeds. Dimensions and designation of plastic-bound metal reeds
BS EN 61146-4:1998 BS EN 61146-4:1998. Video cameras (PAL/SECAM/NTSC). Methods of measurement. Automatic functions of video cameras and camera-recorders
BS ISO 15031-4:2005 BS ISO 15031-4:2005. Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics. External test equipment
WD/ISO/IEC14496-12 : 2005 EDTN2 WD/ISO/IEC14496-12 : 2005 EDTN2. ISO/IEC14496-12 : 2005 Information technology - Coding of audio-visual objects. Part 12: ISO base media file format
WD/ISO/IEC15444-12 : 2005 EDTN2 WD/ISO/IEC15444-12 : 2005 EDTN2. ISO/IEC15444-12 : 2005 Information technology - JPEG 2000 image coding system. Part 12: ISO base media file format
DD CEN/TS 15186:2005 DD CEN/TS 15186:2005. Furniture. Assessment of the surface resistance to scratching
DD CEN/TS 15185:2005 DD CEN/TS 15185:2005. Furniture. Assessment of the surface resistance to abrasion
05/30131998 DC 05/30131998 DC. BS EN 15180. Food processing machinery. Forming machines. Safety and hygiene requirements
BS EN 61083-2:1997 BS EN 61083-2:1997. Digital recorders for measurements in high-voltage impulse tests. Evaluation of software used for the determination of the parameters of impulse waveforms
BS ISO 14837-1:2005 BS ISO 14837-1:2005. Mechanical vibration. Ground-borne noise and vibration arising from rail systems. General guidance
BS EN 60193:1999 BS EN 60193:1999. Hydraulic turbines, storage pumps and pump-turbines. Model acceptance tests
BS ISO/IEC 24730-1:2006 BS ISO/IEC 24730-1:2006. Information technology. Real-time locating systems (RTLS). Application program interface (API)
BS EN 1440:2005 BS EN 1440:2005. LPG equipment and accessories. Transportable refillable welded and brazed steel liquefied petroleum gas (LPG) cylinders. Periodic inspection
BS EN 13631-15:2005 BS EN 13631-15:2005. Explosives for civil uses. High explosives. Calculation of thermodynamic properties
BS EN 13631-1:2005 BS EN 13631-1:2005. Explosives for civil uses. High explosives. Requirements
05/30131909 DC 05/30131909 DC. IEC 62004 ED 1. Thermal resistant aluminium alloy wire for overhead line conductors
ISO12473 : 2006 EDTN 1 ISO12473 : 2006 EDTN 1. ISO12473 : 2006 General principles of cathodic protection in sea water
DD IEC/PAS 62400:2005 DD IEC/PAS 62400:2005. Structuring principles for technical products and technical product documentation. Letter codes. Main classes and subclasses of objects according to their purpose and task
BS EN 13438:2005 BS EN 13438:2005. Paints and varnishes. Powder organic coatings for galvanized or sherardised steel products for construction purposes
BS EN 12467:2004 BS EN 12467:2004. Fibre-cement flat sheets. Product specification and test methods
BS EN 492:2004 BS EN 492:2004. Fibre cement slates and fittings. Product specification and test methods
BS ISO 18852:2005 BS ISO 18852:2005. Rubber compounding ingredients. Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
BS EN ISO 17633:2006 BS EN ISO 17633:2006. Welding consumables. Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels. Classification
BS EN ISO 17634:2006 BS EN ISO 17634:2006. Welding consumables. Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels. Classification
BS ISO 16881-1:2005 BS ISO 16881-1:2005. Cranes. Design calculation for rail wheels and associated trolley track supporting structure. General
PD IEC/TR 62095:2003 PD IEC/TR 62095:2003. Electric cables. Calculation of current rating. Cable current rating calculations using finite element method
BS EN 13845:2005 BS EN 13845:2005. Resilient floor coverings. Polyvinyl chloride floor coverings with particle based enhanced slip resistance. Specification
PD CEN/TR 15138:2005 PD CEN/TR 15138:2005. Petroleum products and other liquids. Guide to flash point testing
PD CEN/TR 15139:2005 PD CEN/TR 15139:2005. Petroleum products and other liquids. Applicability of test methods on sulfur determination in petrol and diesel fuel
PD CLC/TR 50456:2005 PD CLC/TR 50456:2005. Guidelines for achieving compliance with EC directives for alarm systems
05/30131809 DC 05/30131809 DC. EN 12259-12. Fixed firefighting systems. Components for sprinkler and water spray systems. Part 12. Pumps
05/30131765 DC 05/30131765 DC. EN 331 AMD 1. Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
PD CLC/TR 50442:2005 PD CLC/TR 50442:2005. Guidelines for product committees on the preparation of standards related to human exposure from electromagnetic fields
05/30131726 DC 05/30131726 DC. ISO/DIS 16813. Building environment design. Indoor environment. General principles
BS EN 14471:2005 BS EN 14471:2005. Chimneys. System chimneys with plastic flue liners. Requirements and test methods
KIT 173 KIT 173. Escalators and moving walks kit
KIT 172 KIT 172. BS EN 81 series. Lifts kit
KIT 171 KIT 171. BS 5655 Lifts and service lifts and codes of practice kit
KIT 170 KIT 170. BS 5655 series. Lifts and service lifts kit
DD CEN/TS 15130:2006 DD CEN/TS 15130:2006. Postal services. DPM infrastructure. Messages supporting DPM applications
BS EN 1242:2005 BS EN 1242:2005. Adhesives. Determination of isocyanate content
BS EN 14241-1:2005 BS EN 14241-1:2005. Chimneys. Elastomeric seals and elastomeric sealants. Material requirements and test methods. Seals in flue liners
PD CEN/TR 15172-2:2005 PD CEN/TR 15172-2:2005. Whole-body vibration. Guidelines for vibration hazards reduction. Management measures at the workplace
PD CEN/TR 15172-1:2005 PD CEN/TR 15172-1:2005. Whole-body vibration. Guidelines for vibration hazards reduction. Engineering methods by design of machinery
BS EN 14570:2005 BS EN 14570:2005. Equipping of LPG tanks, overground and underground
05/30131477 DC 05/30131477 DC. ISO 17752. Corrosion of metals and alloys. Procedure to determine runoff rates of metals from materials as a result of atmospheric corrosion
BS EN 40-4:2005 BS EN 40-4:2005. Lighting columns. Requirements for reinforced and prestressed concrete lighting columns
05/30131379 DC 05/30131379 DC. BS EN 15191. Precast concrete products. Classification of glassfibre reinforced concrete performances
BS ISO 22670:2006 BS ISO 22670:2006. Space data and information transfer systems. Space link extension(SLE). Return-channel-frames service
BS ISO 11726:2004 BS ISO 11726:2004. Solid mineral fuels. Guidelines for the validation of alternative methods of analysis
BS ISO 16468:2005 BS ISO 16468:2005. Investment castings (steel,nickel alloys and cobalt alloys). General technical requirements
BS ISO 23529:2004 BS ISO 23529:2004. Rubber. General procedures for preparing and conditioning test pieces for physical test methods
BS EN 12386:2005 BS EN 12386:2005. Chemicals used for treatment of water intended for human consumption. Copper sulfate
BS EN 12173:2005 BS EN 12173:2005. Products used for treatment of water intended for human consumption. Sodium fluoride
BS EN 12126:2005 BS EN 12126:2005. Chemicals used for treatment of water intended for human consumption. Liquefied ammonia
BS EN 12125:2005 BS EN 12125:2005. Chemicals used for treatment of water intended for human consumption. Sodium thiosulfate
BS EN 12124:2005 BS EN 12124:2005. Chemicals used for treatment of water intended for human consumption. Sodium sulfite
BS EN 12123:2005 BS EN 12123:2005. Chemicals used for treatment of water intended for human consumption. Ammonium sulfate
BS EN 12122:2005 BS EN 12122:2005. Chemicals used for treatment of water intended for human consumption. Ammonia solution
BS EN 12121:2005 BS EN 12121:2005. Chemicals used for treatment of water intended for human consumption. Sodium disulfite
BS EN 12120:2005 BS EN 12120:2005. Chemicals used for treatment of water intended for human consumption. Sodium hydrogen sulfite
BS EN 1421:2005 BS EN 1421:2005. Chemicals used for treatment of water intended for human consumption. Ammonium chloride
BS EN 898:2005 BS EN 898:2005. Chemicals used for treatment of water intended for human consumption. Sodium hydrogen carbonate
BS EN 897:2005 BS EN 897:2005. Chemicals used for treatment of water intended for human consumption. Sodium carbonate
BS EN 896:2005 BS EN 896:2005. Chemicals used for treatment of water intended for human consumption. Sodium hydroxide
BS EN ISO 12870:2004 BS EN ISO 12870:2004. Ophthalmic optics. Spectacle frames. Requirements and test methods
06/30131006 DC 06/30131006 DC. ISO 22935-2. Milk and milk products. Sensory Analysis. Part 2. Methodology. Recommended methods for sensory evaluation
06/30131003 DC 06/30131003 DC. ISO 22935-1. Milk and milk products. Sensory analysis. Part 1. General guidance for the recruitment, selection, training and monitoring of assessors
BS EN 13525:2005 BS EN 13525:2005. Forestry machinery. Wood chippers. Safety
ISO/IEC21117 : 2005 EDTN 1 ISO/IEC21117 : 2005 EDTN 1. ISO/IEC21117 : 2005 Information technology - Office equipment - Copying machines and multi-function devices - Information to be includedin specification sheets and related test methods
BIP 2067:2005 BIP 2067:2005. Business Ethics and the 21st Century Organization
ISO13992 : 2006 EDTN2 ISO13992 : 2006 EDTN2. ISO13992 : 2006 Alpine touring ski-bindings - Requirements and test methods
BS EN 14618:2005 BS EN 14618:2005. Agglomerated stone. Terminology and classification
BS ISO 1268-4:2005 BS ISO 1268-4:2005. Fibre-reinforced plastics. Methods of producing test plates. Moulding of prepregs
BS ISO 12488-1:2005 BS ISO 12488-1:2005. Cranes. Tolerances for wheels and travel and traversing tracks. General
BS ISO 4925:2005 BS ISO 4925:2005. Road vehicles. Specification of non-petroleum-base brake fluids for hydraulic systems
BS EN 62323:2005 BS EN 62323:2005. Dimensions of half pot-cores made of ferrite for inductive proximity switches
PAS 68:2005 PAS 68:2005. Specification for vehicle security barriers. Fixed bollards


Any question, send the mail to findstandards@tom.com directly

http://www.findstandards.info

http://www.findstandards.info/Standards/DIN%20Standards.htm

http://www.findstandards.info/Standards/BSI%20Standards.htm

http://www.findstandards.info/Standards/ASTM%20Standards.htm

http://www.findstandards.info/Standards/ISO%20Standards.htm

http://www.findstandards.info/Standards/SAE%20Standards.htm

http://www.findstandards.info/Standards/JIS%20Standards.htm


http://www.findstandards.info/Standards/NFPA%20Standards.htm


http://www.findstandards.info/Standards/IEEE%20Standards.htm


http://www.findstandards.info/Standards/API%20Standards.htm